对—乙酰氧基苯甲酸与聚对苯二甲酸乙二醇酯共缩聚反应及醚键…

监测了对－乙酰氧基苯甲酸与聚对苯二甲酸乙二醇酯（ＰＥＴ）共缩聚反应过程中ＨＮＭＲ图谱及特性粘度的变化，对乙酰氧基酯交换反应及乙酰脂肪酯的反应活性进行了研究，并研究了以低分子量ＰＥＴ或对苯二甲酸二乙二醇酯为原料时反应中醚键的形成及其进入共聚酯链的规律性。     

聚对苯二甲酸乙二醇酯和聚对苯二甲酸丁二醇酯化学扩链反应

综述了用于聚对苯二甲酸乙二醇酯（ＰＥＴ）、聚对苯二甲酸丁二醇酯（ＰＢＴ）化学扩链反应的羧基加成型和羟基加成型扩链剂，以及缩合型扩链反应、羧基加成型扩链反应和羟基加成型扩链反应、羧羟基同时加成型扩链反应。讨论了扩链反应、反应特性和扩链产物的性能，并简要介绍了国内研究概况。参考文献２０篇。     

聚对苯二甲酸乙二醇酯切片的固相聚合规律

简要介绍了制备高分子量聚对苯二甲酸乙二醇酯的三种方法,重点介绍了其固相聚合的基本原理及主要副反应规律,固相聚合的各种影响因素,如预聚体原料路线、端羟基和羟基平衡、切片形状和尺寸、催化剂、反应副产物等。最后介绍了聚对苯二甲酸乙二醇酯固相滞反应动力学,如温度、时间对固相聚合反应速度的影响,低温固相聚合反应动力学等。     

聚对苯二甲酸乙二酯(PET)/聚对乙酰氧基甲酸(PHB)共聚酯及同类共聚物序列分布表征的数学统计

由聚对苯二甲酸乙二酯(PET)和对-乙酰氧基苯甲酸制得的PET/PHB共聚酯代表了一类序列结构较一般二元共聚物复杂的共聚体系.在揭示了这类共聚物与序列分布有关的诸概率参数中只有一个是独立的之后,定义了参数B_q来描述此类共聚物的无规度.并指出,共聚物B_q=b时的序列分布,可以从一般二元共聚物无规度B=b时的序列结构加以推断.     

对羟基苯甲酸／对苯二甲酸／双酚A三元共聚酯的核磁共振表征

对羟基苯甲酸／对苯二甲酸／双酚Ａ三元共聚酯的核磁共振表征吴大诚，谢新光，李瑞霞，王勇（成都科技大学纺织工学院成都６１００６５）周子南，高新风，孝延文，张建国（中国科学院长春应用化学研究所高分子物理开放实验室长春１３００２２）关键词对羟基苯甲酸／对苯二...     

聚对苯二甲酸乙二醇酯二聚体模化物键离能的理论研究

采用密度泛函理论方法计算了聚对苯二甲酸乙二醇酯(PET)二聚体模化物的键离能,并设计PET热解的3条可能路径,分析PET热解机理.由于乙酸甲酯与PET具有相同的酯基官能团,因此以乙酸甲酯为简单模型参照物,采用M06-2X,B3P86,B3LYP以及BHandHLYP方法分别在基组LanL2DZ,6-31G(d),3-2...     

对羟基苯甲酸(PHB)聚对苯二甲酸乙二酯(PET)液晶共聚酯和聚对苯二甲酸乙二酯共混物的酯交换表征

在温度280℃附近对含有液晶共聚酯P-Hydroxy Benzoic Acid/Poly(-Ethylene Terephthalate-)PHB/PET和Poly(-Ethylene Terephthalate-)PET的共混样品进行热处理时,发现共混物的熔点随热处理的时间增加而不断降低,热处理温度越高,相同时间内共混物熔点下降程度越大;而具有相同热历史的纯PET样品熔点几乎保持不变.通过NMR方法证实了PHB/PET-TET共混物熔点随热处理时间下降是由于PHB/PET和PET之间发生了酯交换反应.所以可根据共混物的宏观热性质和PHB/PET序列结构变化表征PHB/PET和PET共混物之间的酯交换程度.     

用~1H-和~(13)C-NMR方法研究聚对苯二甲酸乙二酯/聚一氧基苯甲酸酯共聚酯的序列分布

测定了PET/30PHB和PET/60PHB共聚酯的高分辨~1H和~(13)C谱,并采用INEPT方法和部分弛豫FT技术确定了季碳吸收峰,对NMR谱进行了归属.应用我们先前提出的方法对共聚酯的序列分布进行了表征.结果表明,两种共聚酯的无规度B_q值均小于1,序列分布不象Jackson等认为的那样为完全无规的.此外,文中还指出,某些研究者套用Flory公式判别PET/PHB共聚酯是否为无规的不妥之处.     

酞侧基聚芳醚砜／对苯二甲酸乙二酯－对羟基苯甲酸嵌段共聚物共混物的研究

酞侧基聚芳醚砜／对苯二甲酸乙二酯－对羟基苯甲酸嵌段共聚物共混物的研究李刚，殷敬华，李滨耀（中国科学院长春应用化学研究所，长春，１３００２２）关键词酞侧基聚芳醚砜，热致性液晶高聚物，原位复合材料，对苯二甲酸乙二酯－对羟基苯甲酸嵌段共聚物将热塑性树脂与热...     

热致液晶共聚酯酰胺／PET共混物的流变性能和原位增强特性

采用Ｉｎｓｔｒｏｎ３２１１型毛细管流变仪研究了ＰＥＡ／ＰＥＴ共混物的流变性能，据此探讨共混物熔体的可纺性，讨论了共混物配比与复合纤维力学性能的关系，并且偏光显微镜，扫描电镜研究纤维的结构。结果表明，共混物的表观粘度低于ＰＥＴ的粘度，当ＰＥＡ为１０％，共混物的表观粘度达到最小值；且ＰＥＡ含量低于１０％时，共混物的可纺性即，表现出良好的原位增强效果。     

Shape Memory Properties in Poly(ethylene oxide)–Poly(ethylene terephthalate) Copolymers

Memory effects of several copolymers of poly(ethylene oxide) (PEO) and poly(ethylene terephthalate) (PET) were illustrated with photos, determined with shrinkage experiments and characterized by the recovery of samples to their original figures. Copolymers of appropriate composition could undertake an approximately full recovery which is tightly related to the annealing temperature at which shrinkage of samples occurs to some extent. Melting and recrystallization of PEO segments may be responsible for the memory effect. The memory properties of samples almost kept unchanged after many fatigue cycles (e.g. 15–20 cycles), which could make these copolymers useful in practical applications as novel shape memory materials. © 1997 John Wiley & Sons, Ltd.     

Transesterification kinetics in the reactive blends of liquid crystalline copolyesters and poly(ethylene terephthalate)

The transesterification kinetics of poly(ethylene terephthalate) (PET)/copoly(oxybenzoate-p-terephthalate) (liquid crystalline polymer, LCP) (70/30 by weight) in the presence of small amount of bis(2-oxazoline) (BOZ) as chain extender was studied by using 1H nuclear magnetic resonance. The kinetic data was treated as a second-order reversible reaction, and it was found that the rate constants of transesterification at 270, 280 and 290 °C were 1.55×10⁻², 2.20×10⁻² and 3.01×10⁻² min⁻¹, respectively, the value of which was higher than the blend without addition of BOZ, 1.26×10⁻² min⁻¹, and the activation energy of PET/LCP transesterification was 84.4 kJ mol⁻¹.     

聚砜-聚芳酯嵌段共聚物的合成及其液晶性

本文以对笨二甲酰氯(TC)、对苯二酚(HQ)及不同分子量的端羟基聚砜低聚物(PSF)为原料,通过熔融缩聚法制得了一系列含有聚砜间隔段的三组分嵌段共聚酯。对产物用偏光显微镜下的双折射、搅动乳光和X-光衍射等手段研究了其液晶行为。分别以分子量为1.05×10~3和2.05×10~3的PSF为原料,所得其聚酯出现液晶性所需介晶单元的最小用量各为30和50mol％,若以双酚A(BPA)或双酚S(BPS)残基单元代替PSF基元计算,则为8.3和9.9mol％。     

聚对苯二甲酸乙二醇酯/层状双氢氧化物纳米复合材料

聚对苯二甲酸乙二醇酯(PET)/层状双氢氧化物(LDHs)纳米复合材料是一种性能优异并具有广泛应用前景的新型聚合物基纳米复合材料.与纯PET相比, 其力学性能、热稳定性、阻燃性能与耐紫外线功能等均有明显提高或改善.本文对近年来PET/LDH纳米复合材料的研究进展进行了综述.首先, 对LDHs 的化学组成和结构特点进行了简要介绍, 并且对其制备方法和物理化学性质等进行了简单论述, 然后, 对PET/LDH纳米复合材料的制备、结构表征、结晶行为、机械力学性能以及耐热、阻燃和耐紫外线等功能性质的最新研究进展进行重点综述; 最后, 对其应用前景进行展望.     

聚对苯二甲酸乙二醇酯/碳酸钙纳米复合材料的制备和表征

以聚乙二醇磷酸酯1000为表面处理剂, 采用碳化法合成了方解石型碳酸钙纳米粒子, 进一步制备了聚对苯二甲酸乙二醇酯/碳酸钙纳米复合材料. 采用透射电子显微镜(TEM)、 X射线衍射(XRD)、 傅里叶变换红外光谱(FTIR), 场发射扫描电子显微镜(FESEM)和热重分析(TGA)对样品进行了分析. 结果表明, 聚乙二醇磷酸酯1000成功地修饰到碳酸钙的表面, 并得到平均直径为60 nm, 形貌为立方体的纳米碳酸钙晶体. 与碳酸钙(空白)样品相比, 表面处理碳酸钙的复合材料表现出更好的分散性和热稳定性. 采用Friedman方法计算了复合材料热分解的活化能. 聚对苯二甲酸乙二醇酯、 聚对苯二甲酸乙二醇酯/空白碳酸钙和聚对苯二甲酸乙二醇酯/表面处理碳酸钙的活化能分别为200.58, 214.86和219.50 kJ/mol, 进一步说明了表面处理碳酸钙更好地改善了聚对苯二甲酸乙二醇酯的热稳定性.     

一维取向聚酯材料的研究进展

回顾了近年来在一维取向聚对苯二甲酸乙二酯材料的形态结构，特别是其非晶区结构和力学变形机理方面的研究进展。着重对制备高取向纤维的几种新技术及所得材料的力学性能进行了介绍。     

Reaction to fire of recycled poly(ethylene terephthalate)/polycarbonate blends

In the present paper, we study the effect of both morphology and compatibilization on the reaction to fire of blends of recycled poly(ethylene terephthalate) (PETr) with recycled polycarbonate (PCr). It is shown that while the flame retardancy of blends containing less than 50% w/w of PCr increases almost linearly with PCr content, blends containing more than 50% w/w of PCr react to fire like pure PCr. This change of reaction to fire correlates with the formation of a continuous PCr phase in the blend.The compatibilization of the blend by a trans-esterification reaction leading to the formation of copolymers at the interface decreases the overall fire performances due to PETr chain breaking as a side effect which results in a strong decrease of blend viscosity and of the temperature at which mass loss begins.     

Poly(ethylene terephthalate) copolymers containing nitroterephthalic units. III. Methanolytic degradation

The methanolytic degradation of poly(ethylene terephthalate) (PET) copolymers containing nitroterephthalic units was investigated. Random poly(ethylene terephthalate‐co‐nitroterephthalate) copolyesters (PETNT) containing 15 and 30 mol % nitrated units were prepared from ethylene glycol and a mixture of dimethyl terephthalate and dimethyl nitroterephthalate. A detailed study of the influence of the nitro group on the methanolytic degradation rate of the nitrated bis(2‐hydroxyethyl) nitroterephthalate (BHENT) model compound in comparison with the nonnitrated bis(2‐hydroxyethyl) terephthalate (BHET) model compound was carried out. The kinetics of the methanolysis of BHENT and BHET were evaluated with high‐performance liquid chromatography and ¹H NMR spectroscopy. BHENT appeared to be much more reactive than BHET. The methanolytic degradation of PET and PETNT copolyesters at 80 °C was followed by changes in the weight and viscosity, gel permeation chromatography, differential scanning calorimetry, scanning electron microscopy, and ¹H and ¹³C NMR spectroscopy. The copolyesters degraded faster than PET, and the degradation increased with the content of nitrated units and occurred preferentially by cleavage of the ester groups placed at the meta position of the nitro group in the nitrated units. For both PET and PETNT copolyesters, an increase in crystallinity accompanied methanolysis. A surface degradation mechanism entailing solubilization of the fragmented polymer and consequent loss of mass was found to operate in the methanolysis of the copolyesters. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2276–2285, 2002     

Miscibility and Crystallization in Binary Crystalline Blends of Poly(butylene terephthalate) with Poly(butylene terephthalate-e-caprolactone)

Poly(butylene terephthalate)/poly(butylene terephthalate-e-caprolactone) is a new A/AxB1-x binary crystalline blend with intra-molecular repulsion interaction. Using the mean-field binary interaction model, the value of interaction parameter between the butylene terephthalate and caprolactone structural unit was first reported to be 0.305. This blend exhibited different crystallization behavior from a typical homopolymer/copolymer blend, which was carefully investigated by di?erential scanning calorimetry. It was found that poly(butylene terephthalate-e-caprolactone) copolymers have a great effect on the pure poly(butylene terephthalate) chain mobility and poly(butylene terephthalate) crystalline lattice packing. In the meantime, the crystallization of butylene terephthalate segments in copolymers was restricted by the previously formed poly(butylene terephthalate) crystallites. The two constituents for blending can not form a co-crystal in the range of composition even if they have the same butylene terephthalate unit. It can be concluded that longersegments in a copolymer would be beneficial for the formation of a co-crystal in blends.