High-power polycrystalline Er:YAG ceramic laser at 1617 nm

We report on the efficient operation of a high-power erbium-doped polycrystalline Er:YAG ceramic laser at 1617 nm resonantly pumped by a high-power 1532 nm Er,Yb fiber laser. Lasing characteristics of Er:YAG ceramics with different Er3+ concentrations are evaluated and compared. With an output coupler of 15% transmission and 0.5 at. % Er3+-doped YAG ceramic as the gain media, the laser generates 14 W of output power at 1617 nm for 28.8 W of incident pump power at 1532 nm, corresponding to a slope efficiency with respect to incident pump power of 51.7%.     

In-band pumped highly efficient Ho:YAG ceramic laser with 21 W output power at 2097 nm

We report on the high-power and high-efficiency operation of a polycrystalline Ho:YAG ceramic laser in-band pumped by a Tm fiber laser at ~1907 nm. Lasing characteristics of a 1.5 at.% and a 2.0 at.% Ho3?-doped YAG ceramic were investigated and compared. Using an output coupler of 6% transmission, over 21.4 W of cw output power at 2097 nm has been generated with the 1.5 at.% doped Ho:YAG ceramic under 35 W of incident pump power, corresponding to an average slope efficiency with respect to the incident pump power of 63.6% and an optical-to-optical conversion efficiency of 61.1%.     

Nd:YAG陶瓷与单晶4F3/2–4I13/2跃迁的弱谱线多波长激光性能对比

报道了基于半导体激光端面抽运Nd:YAG的⁴F_3/2–⁴I_13/2 跃迁的弱谱线多波长激光输出. 实验对比了透明陶瓷与单晶材料的激光输出特性, 表明透明陶瓷和单晶材料荧光谱强度的略微差异, 导致了多波长输出时相同两个波长之间的激光强度比在两种材料中的差异. 基于两种耦合输出镜片, 激光阈值都在2 W左右. 在13.5 W的抽运功率下, 基于Nd:YAG透明陶瓷获得了输出功率4.05 W、强度比1 :2的1338与1356 nm双波长激光和输出功率3.65 W、强度比13 : 1的1356与1414 nm 双波长激光, 斜率效率分别达33.9% 和31.9%.     

Highly efficient in-band pumped Er:YAG laser with 60 W of output at 1645 nm

A high-power Er:YAG laser that is in-band pumped by a high-power cladding-pumped erbium-ytterbium codoped fiber laser operating at 1532 nm is reported. The Er:YAG laser produced 60.3 W of continuous-wave output at 1645.3 nm in a beam with M2 approximately equal to 3 for 82 W of incident pump power and 20 W of TEM00 output with M2 < 1.2 for 32.4 W of incident pump power. The slope efficiency with respect to incident pump power at pump powers of >20 W was approximately 81%. In the Q-switched mode of operation, a slightly modified resonator configuration incorporating an electro-optic Q switch produced pulses of approximately 4 mJ energy and approximately 100 ns (FWHM) duration, corresponding to a peak power of approximately 42 kW at a repetition rate of 1 kHz for an incident pump power of 16.8 W. The prospects for further improvement in continuous-wave and Q-switched performance are discussed.     

In-band pumped Er:YAG ceramic laser with 11 W of output power at 1645 nm

We report on a high power polycrystalline Er:YAG ceramic laser in-band pumped by a cladding-pumped Er, Yb fiber laser wavelength locked at 1532 nm with a volume Bragg grating. Using 1.0 at % Er³⁺-doped ceramic as the gain medium and an output coupler of 10% transmission, the laser had a threshold pump power of ∼1.5 W and generated 11 W of continuous-wave output at 1645 nm for 23.3 W of incident pump power at 1532 nm, corresponding to a slope efficiency with respect to incident pump power of 51%.     

High-energy directly diode-pumped Q-switched 1617 nm Er:YAG laser at room temperature

We describe high-energy Erbium-doped yttrium aluminum garnet (Er:YAG) lasers operating at 1617?nm, resonantly pumped using 1532?nm fiber-coupled laser diodes. A maximum continuous wave output power of 4.3?W at 1617?nm was achieved with an output coupler of 20% transmission under incident pump power of 29.7?W, resulting in an optical conversion of 14% with respect to the incident pump power. In Q-switched operation, the pulse energy of 11.8?mJ at 100?Hz pulse repetition frequency and 81?ns pulse duration was obtained. This energy is the highest pulse energy reported for a directly diode-pumped Q-switched Er:YAG laser operating at 1617?nm.     

Continuous-wave, 15.2 W diode-end-pumped Nd:YAG laser operating at 946 nm

A high-power continuous-wave (cw) Nd:YAG laser operating at 946 nm by utilizing a quasi-three-level transition is reported. The laser consists of a composite Nd:YAG rod end pumped by a fiber-coupled diode laser and a simple plane-concave cavity. At an incident pump power of 40.2 W, a maximum cw output of 15.2 W at 946 nm is obtained, achieving a slope efficiency of 45%. To the best of our knowledge, this is the highest output at 946 nm ever generated by diode-pumped Nd:YAG lasers. In addition, at an incident pump power of 15.2 W, a 1.25 W blue output at 473 nm is achieved with a simple compact three-element cavity and a type-I lithium triborate (LiB(3)O(5)) crystal as a frequency doubler.     

Efficient Tm:YLF laser with a volume Bragg grating recycle pumped by laser diode

By using a pump recycling configuration, we presented a high efficient diode-pumped Tm:YLF laser with a volume Bragg grating. When the incident pump power was 33.1 W, a maximum output power of 11.1 W at 1907.8 nm with full width at half maximum of 0.6 nm was obtained. The slope efficiency with respect to the incident pump power was 44.8%, and the optical-to-optical efficiency was 33.5%. In addition, the VBG-based Tm:YLF laser was employed as a pumping source of Ho:YAG laser, the maximum output power of 4.7 W with a slope efficiency of 67.0% was obtained, corresponding to Tm-to-Ho conversion efficiency of 51.6%.     

Diode end-pumped 1123-nm Nd:YAG laser with 2.6-W output power

We present a compact and high output power diode end-pumped Nd:YAG laser which operates at the wavelength of 1123 nm. Continuous wave (CW) laser output of 2.6 W was achieved at the incident pump power of 15.9 W, indicating an overall optical-optical conversion efficiency of 16.4%, and the slope efficiency was 18%.     

High-power Er:YAG laser with quasi-top-hat output beam

A simple method for simultaneously exciting the fundamental (TEM00) transverse mode and first order Laguerre-Gaussian (LG01) donut mode in an end-pumped solid-state laser to yield a quasi-top-hat output beam is reported. This approach has been applied to an Er:YAG laser, in-band pumped by an Er,Yb fiber laser, yielding 9.6 W of continuous-wave output at 1645 nm in a top-hat-like beam with beam propagation factor (M2)<2.1 for 24 W of incident pump power at 1532 nm. The corresponding slope efficiency with respect to incident pump power was 49%. The prospects of further scaling of output power and improved overall efficiency are considered.     

1064 nm Nd:YAG laser intracavity pumped at 946 nm

We present for the first time a Nd:YAG laser emitting at 1064 nm intracavity pumped by a 946 nm diode-pumped Nd:YAG laser. A 885 nm laser diode is used to pump the first Nd:YAG crystal emitting at 946 nm, and the second Nd:YAG laser emitting at 1064 nm intracavity pumped at 946 nm. We achieved an output power of 7.97 W at 1064 nm for an absorbed pump power at 946 nm of 9.55 W, corresponding to an optical efficiency of 83.4%. The beam quality M² quality factor is about 1.1 at the maximum output power.     

Compact and efficient diode-pumped actively Q-switched 1319 nm Nd:YAG ceramic laser

An efficient compact diode-pumped acousto-optic actively Q-switched Nd:YAG ceramic laser operating at 1319 nm was demonstrated. At an incident pump power of 23.7 W, an average output power of 4.8 W at a pulse repetition frequency of 30 kHz was obtained. The corresponding optical-to-optical conversion efficiency was 20.3%. A maximum single pulse energy of 316 μJ with a pulse duration of 78.5 ns was obtained at an incident pump power of 19.4 W and a pulse repetition frequency of 10 kHz.     

Resonantly pumped single frequency Er:YAG laser at 1645 nm

An efficient and single frequency Er:YAG laser pumped by an MGo:PPLN laser locked at 1532 nm with double F-P etalons was reported. The Er:YAG laser operated at 1645 nm, 550 mW of 1645 nm output was achieved under total incident pump power of 7 W. Using the etalons, 45 mW single frequency 1645.1 nm laser was achieved.     

High-efficiency diode-pumped acousto-optically Q-switched 1123 nm ceramic Nd:YAG laser

A high-efficiency diode-pumped acousto-optically (AO) Q-switched ceramic Nd:YAG (cNd:YAG) laser operating at 1123 nm is demonstrated for the first time. With an incident pump power of 17.11 W and a pulse repetition rate of 30 kHz, an average output power of 5.86 W is obtained. The optical-to-optical conversion efficiency is 34.2% and the slope efficiency is 39.1%.     

Efficient continuous-wave and Q-switched operation of a diode-pumped Yb:KLu(WO4)2 laser with self-Raman conversion

Efficient cw and passively Q-switched operation with self-stimulated Raman scattering conversion was demonstrated in a compact diode-pumped Yb:KLu(WO4)2 laser. A cw output power of 3.28 W was obtained with an optical efficiency of 48.2% and a slope efficiency of 78.2% with respect to the incident pump power. Stable Q-switched operation was achieved with a Cr4+:YAG saturable absorber, generating 32.4 microJ fundamental pulses with a duration of 1.41 ns at 1030.6 nm and 14.4 microJ Raman pulses with a duration of 0.71 ns at 1137.6 nm. At an incident pump power of 7.0 W, the average output power reached 0.9 and 0.4 W for fundamental and Raman radiation, with slope efficiencies of 32.1% and 14.1%, respectively.     

CW green laser at 520 nm based on sum-frequency mixing of diode pumped Yb:YAG laser

We report for the first time a continuous-wave (CW) green laser emission by sum-frequency mixing in Yb:YAG crystal. Using type-I critical phase-matching LBO crystal, a green laser at 520 nm is obtained by 1030 and 1048 nm intracavity sum-frequency mixing. The maximum laser output power of 269 mW is obtained when an incident pump laser of 17.8 W is used. At the output power level of 269 mW, the output stability is better than 3.2%.     

All-solid-state Nd:YAG-LBO yellow laser at 572 nm

We report for the first time a continuous-wave (CW) yellow laser emission by sum-frequency mixing in Nd:YAG crystal. Using type-I critical phase-matching LBO crystal, a yellow laser at 572 nm is obtained by 1444 and 946 nm intracavity sum-frequency mixing. The maximum laser output power of 178 mW is obtained when an incident pump laser of 18.2 W is used. At the output power level of 178 mW, the output stability is better than 4.2%.     

Room temperature,multi-wavelength operation in Er:YAG

Room temperature, multi-wavelength operation in 0.3% doped Er:YAG laser with double etalons pumped by a MgO:PPLN laser locked at 1532 nm was reported. Lasing occurred predominantly at 1645.1 nm and 1617.2 nm. 350 mW of 1645.1 nm, 160 mW of 1617.2 nm output were achieved under total incident pump power of 7 W.     

Performance of gain-switched all-solid-state quasi-continuous-wave tunable Ti:sapphire laser system

We have made a gain-switched all-solid-state quasi-continuous-wave （QCW） tunable Ti：sapphire laser system, which is pumped by a 532 nm intracavity frequency-doubled Nd：YAG laser. Based on the theory of gain-switching and the study on the influencing factors of the output pulse width, an effective method for obtaining high power and narrow pulse width output is proposed. Through deliberately designing the pump source and the resonator of the Ti：sapphire laser, when the repetition rate is 6 kHz and the length of the cavity is 220 mm, at an incident pump power of 22 W, the tunable Ti：sapphire laser from 700 to 950nm can be achieved. It has a maximum average output power of 5.6W at 800nm and the pulse width of 13.2 ns, giving an optical conversion efficiency of 25.5% from the 532 mn pump laser to the Ti：sapphire laser.     

An Actively Mode-Locked Ho:YAG Solid-Laser Pumped by a Tm-Doped Fiber Laser

An actively mode-locked Ho:YAG laser pumped by a diode-pumped Tm-doped fiber laser is reported.For the cw operation,we obtain the maximum output power of 3.43 W with a central wavelength 2022.2 nm at the maximum incident pump power of 11.4 W,corresponding to a slope efficiency of 34.5%.The beam quality factor M2 is 1.16,and the output beam is close to fundamental TEM_(00) In the case of the CWML operation,a stable pulse train is generated with an average output power up to 3.41 W with a slope efficiency of 34.3%at the incident pump power of 11.4 W and a pulse duration of 294 ps at a repetition rate of 81.92 MHz.In addition,the maximum single pulse energy is 41.6 n J.