Supercritical fluid extraction of grape seed oil and subsequent separation of free fatty acids by high-speed counter-current chromatography

Supercritical fluid extraction (SFE) of grape seed oil was performed to study the effect of various parameters such as pressure, temperature and the particle size of the sample on the yield and composition of oil using an analytical-scale SFE system. Then the extraction was scaled up by 125 times using a preparative SFE system under the optimized conditions of high pressure (30-40 MPa) and low temperature (35-40 degrees C) with medium particle size (20-40 mesh). The maximum yield of the oil can reach 6.2% with pure supercritical CO2 and 4.0% more oil can be obtained by adding 10% of ethanol as modifier. The unsaturated fatty acids (UFSs) make up about 70% in the oil on the basis of free fatty acids. The grape seed oil was then subjected to separation and purification for free fatty acids after saponification by high-speed counter-current chromatography coupled with evaporative light scattering detection (ELSD). The separation of 1.0 g of oil can yield about 430 mg pure linoleic acid at 99% purity. The fatty acids were analyzed by HPLC-ELSD.     

两相溶剂萃取黄连木籽油制备生物柴油

以黄连木籽为原料,采用乙醇/异己烷两相不互溶溶剂对其进行萃取处理.考察了乙醇／异己烷体积比、萃取温度和萃取时间对萃取过程的影响.通过实验确定最佳的萃取条件为,黄连木仁粉50 g,乙醇异己烷总体积300 mL,乙醇/异己烷体积比为50∶50,萃取温度40℃,萃取时间30 min.在此条件下,黄连木籽油出油率达到99.5％...     

Optimisation of supercritical fluid extraction of essential oil components of Diplotaenia cachrydifolia: Box-Behnken design

Essential oil of Diplotaenia cachrydifolia cultivated in Iran was obtained by supercritical fluid extraction (SFE) method. The oils were analysed by capillary gas chromatography using flame ionisation and mass spectrometric detections. The compounds were identified according to their retention indices and mass spectra (EI, 70?eV). The effects of different parameters, such as pressure, temperature, modifier volume and extraction times (dynamic and static), on the SFE were inspected by a fractional factorial design (2(5-2)) to identify the significant parameters and their interaction. It showed that static and dynamic times had no effect on the extraction. Finally, a Box-Behnken design was applied to obtain the optimum condition of the significant parameters. The optimal condition was obtained as 30.2?MPa for pressure, 65.6°C for temperature and 258.4?μL for modifier volume. The main components that were extracted with SFE were dillapiole (35.1%), limonene (33.5%) and α-calacorene (25.5%).     

Supercritical fluid extraction of the volatile oil from Santolina chamaecyparissus

Supercritical fluid extraction (SFE) of the volatile oil from Santolina chamaecyparissus L. flower heads was performed under different conditions of pressure, temperature, mean particle size and CO₂ flow rate. This oil was compared with the essential oil isolated by hydrodistillation (HD). The SFE volatile and essential oils were analysed by GC and GC‐MS. The range of the main volatile components obtained with HD and SFE were, respectively: 1,8‐cineole (25–30% and 7–48%), camphor (7–9% and 8–14%), borneol (7–8% and 2–11%), terpinen‐4‐ol (6–7% and 1–4%), terpinolene (1–4% and 1–7%) and isobornyl acetate (1–2% and 1–11%). The chemical composition of the extracts was greatly influenced by the conditions of pressure and temperature used. In fact, it was possible to enrich the sesquiterpene fraction by increasing the pressure from 8 to 9 MPa, while changing the temperature from 40 to 50°C at 90 bar enriched of the volatiles in n‐alkanes.     

Applications of supercritical fluid extraction (SFE) of palm oil and oil from natural sources

Supercritical fluid extraction (SFE), which has received much interest in its use and further development for industrial applications, is a method that offers some advantages over conventional methods, especially for the palm oil industry. SC-CO? refers to supercritical fluid extraction (SFE) that uses carbon dioxide (CO?) as a solvent which is a nontoxic, inexpensive, nonflammable, and nonpolluting supercritical fluid solvent for the extraction of natural products. Almost 100% oil can be extracted and it is regarded as safe, with organic solvent-free extracts having superior organoleptic profiles. The palm oil industry is one of the major industries in Malaysia that provides a major contribution to the national income. Malaysia is the second largest palm oil and palm kernel oil producer in the World. This paper reviews advances in applications of supercritical carbon dioxide (SC-CO?) extraction of oils from natural sources, in particular palm oil, minor constituents in palm oil, producing fractionated, refined, bleached, and deodorized palm oil, palm kernel oil and purified fatty acid fractions commendable for downstream uses as in toiletries and confectionaries.     

Profile characterization and biological activities of cold pressed Garden Cress (Lepidium sativum) seed oil

Lepidium sativum is cultivated mainly for the edible oil from its seeds, and considered as an unutilized and neglected crop despite its important properties. Its oil fraction is used to produce soap and stabilize linseed oil when it is mixed with wild mustard seed oil. Once converted into fatty acid methyl esters, it represents a good substitute for imported petroleum diesel after alkaline transesterification reaction. In the current study, Lepidium sativum seeds cultivated in Tunisia and the physicochemical properties and nutrient profile of its cold pressed seed oil were investigated. The antioxidant, antibacterial, and anti-inflammatory activities of the above oil were also assessed. Lepidium sativum seed oil was abundant in both linolenic (35.59 ± 1.9%) and oleic (21.14 ± 0.63%) acids, and high amounts of β-sitosterol (42.57 ± 2.96 mg/100 g), campesterol (20.04 ± 1.4 mg/100 g) and Δ 5,24 stigmastadienol (11.82 ± 0.45 mg/100 g) were detected. The total tocopherol content of Lepidium sativum seed oil reached 136.83 ± 7.6 mg/100 g with a predominance of γ-tocopherol (86.23%). Its seed oil exhibited an IC₅₀ of 10.33 ± 0.05 mg/mL and a radical scavenging activity of 415.6 ± 40 Trolox Equivalent Antioxidant Capacity (TEAC) for the DPPH and the ABTS assays, respectively. While the thermal analysis proved a high thermal stability of Lepidium sativum seed oil, that of eight bacteria and one fungal strain showed no noticeable bacterial or antifungal effects. It was also revealed that Lepidium sativum seed oil held a remarkable anti-inflammatory activity. Hence, the obtained results evidenced remarkable chemical, antioxidant and anti-inflammatory properties of Lepidium sativum seed oil, which might potentially be promising for enhancing human health and preventing age-related diseases.     

Extraction of essential oil from Pimpinella anisum using supercritical carbon dioxide and comparison with hydrodistillation

Supercritical fluid extraction (SFE) of essential oil from Pimpinella anisum, using carbon dioxide as a solvent is presented in this work. An orthogonal array design OA9 (3(4)) was applied to select the optimum extraction condition. The effects of pressure, temperature, dynamic extraction time and methanol volume on the extraction efficiency were investigated by the three-level orthogonal array design. Results show that pressure has a significant effect on the extraction efficiency. The extract obtained from P. anisum by using supercritical fluid extraction was compared with the essential oil obtained by hydrodistillation, considering both quantity and quality of the product. SFE products were found to be of markedly different composition, compared with the corresponding hydrodistilated oil. The total amount of extractable substances obtained in SFE (7.5%) is higher than that obtained by hydrodistillation (3.1%) and SFE is faster than hydrodistillation method.     

Composition and antioxidant activity of Thymus vulgaris volatiles: Comparison between supercritical fluid extraction and hydrodistillation

Supercritical fluid extraction (SFE) of the volatile oil from Thymus vulgaris L. aerial flowering parts was performed under different conditions of pressure, temperature, mean particle size and CO₂ flow rate and the correspondent yield and composition were compared with those of the essential oil isolated by hydrodistillation (HD). Both the oils were analyzed by GC and GC‐MS and 52 components were identified. The main volatile components obtained were p‐cymene (10.0–42.6% for SFE and 28.9–34.8% for HD), γ‐terpinene (0.8–6.9% for SFE and 5.1–7.0% for HD), linalool (2.3–5.3% for SFE and 2.8–3.1% for HD), thymol (19.5–40.8% for SFE and 35.4–41.6% for HD), and carvacrol (1.4–3.1% for SFE and 2.6–3.1% for HD). The main difference was found to be the relative percentage of thymoquinone (not found in the essential oil) and carvacryl methyl ether (1.0–1.2% for HD versus t?0.4 for SFE) which can explain the higher antioxidant activity, assessed by Rancimat test, of the SFE volatiles when compared with HD. Thymoquinone is considered a strong antioxidant compound.     

Enrichment of the thymoquinone content in volatile oil from Satureja montana using supercritical fluid extraction

Supercritical fluid extraction (SFE) of the volatile oil from Satureja montana L. was performed under different conditions of pressure (90 and 100 bar), temperature (40 and 50°C), mean particle sizes (0.4, 0.6 and 0.8 mm) and CO₂ flow rate (0.8, 1.1 and 1.3 kg/h) to understand the influence of these parameters on the composition and yield of this oil. The results were compared with those obtained for the essential oil isolated by hydrodistillation (HD). The volatile and the essential oil were analysed by GC and GC‐MS. The main compounds are carvacrol (52.2–62.0% for HD vs. 41.7–64.5% for SFE), thymol (8.6–11.0% for HD vs. 6.0–11.3% for SFE), p‐cymene (6.9–12.8% for HD vs. 6.0–17.8% for SFE), γ‐terpinene (6.4–9.4% for HD vs. 2.3–6.0% for SFE) and β‐bisabolene (2.0–2.7% for HD vs. 2.2–3.5% for SFE). The major difference between SFE and HD was the relative amount of thymoquinone, an oxygenated monoterpene with important biological activities, which can be ten‐fold higher in volatile oil (1.6–3.0 for SFE vs. 0.2% for HD). The morphology of the glandular trichomes of S. montana and the effect of the grinding process on them was also evaluated by SEM.     

In vivo antioxidant activity of Pinus koraiensis nut oil obtained by optimised supercritical carbon dioxide extraction

In this study, an orthogonal array design OA? (3?) was employed to optimise the conditions of supercritical carbon dioxide (SC-CO?) extraction of Pinus koraiensis nut oil. The effects of pressure, temperature and extraction time on the oil yield were investigated. Next, the fatty acid composition of the oil was examined by gas chromatography-mass spectrometry (GC-MS). The in vivo antioxidant activity of the oil was determined by estimating the superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px), total antioxidant capacity (T-AOC) and the content of malondialdehyde (MDA) in rats fed with a high-fat diet. The results showed that extraction pressure and time were the main variables that influenced the oil yields. The optimal conditions with which to obtain highest yield of oil were determined to be 5760.83?psi, 50°C and 3.0?h (extraction yield was 458.5?g?kg?1); nine compounds, constituting about 99.98% of the total oil, were identified. The most abundant polyunsaturated fatty acids identified in the oil, linoleic acid and α-linolenic acid, constituted 41.79% and 15.62% of the oil, respectively. Moreover, the results on their antioxidant activities showed that the oil could improve the activities of SOD, GSH-Px and T-AOC, and reduce the content of MDA significantly, in the serum. These results indicate that P. koraiensis nut oil obtained by SC-CO? extraction had excellent antioxidant activities.     

Correlation of supercritical-fluid extraction recoveries with supercritical-fluid chromatographic retention data: A fundamental study

The possibility of using supercritical-fluid chromatographic retention data for examining the effects of operational parameters, such as pressure and flow rate, on the extraction characteristics in supercritical-fluid extraction (SFE) was investigated. A model was derived for calculating the extraction efficiency in SFE from retention data and peak shapes measured in supercritical-fluid chromatography (SFC). By performing the SFC experiments at the same pressure and temperature as the SFE extractions using the SFE extraction cell as the SFC column, an accurate prediction of extraction efficiencies could be made. Finally, the effects of matrix composition and analyte concentration on extraction efficiency were studied.     

Comparative analysis of the oil and supercritical CO2 extract of Ridolfia segetum (L.) Moris

Supercritical carbon dioxide extraction allowed to obtain the volatile oil of different aerial parts of Ridolfia segetum (L.) Moris. Extraction conditions were as follows: pressure, 90 bar; temperature, 50°C and carbon dioxide flow, Φ?=?1.0?kg?h^?1. Waxes were entrapped in the first separator set at 90?bar and ?10°C. The oil was recovered in the second separator working at 15?bar and 10°C. The main components of the flower oil were α-phellandrene (19.4%), terpinolene (20.5%), piperitenone oxide (11.6%), β-phellandrene (8.2%), (Z)-β-ocimene (7.8%), myristicin (7.5%) and p-cymene (4.4%). The comparison with the hydrodistilled (HD) oil reveal that the significative difference was the content of sesquiterpenes which are higher in the supercritical fluid extraction (SFE) products. Collection of samples at different extraction times during supercritical extraction, allowed to monitor the change of the oil composition. Lighter compounds, as hydrocarbon monoterpenes, were extracted in shorter times than the heavier hydrocarbon and oxygenated sesquiterpenes. The oil from the steams was characterized by a high content of α-phellandrene (12.9%), terpinolene (11.6%), myristicin (11.0%), p-cymene (9.9%), β-phellandrene (8.2%) and (Z)-β-ocimene (6.0%) while the main components of the fruits were found to be myristicin (70.8%), piperitenone oxide (19.9%) and dill apiole (4.2%).     

Fatty and resin acid analysis in tall oil products via supercritical fluid extraction-supercritical fluid reaction using enzymatic catalysis

Supercritical fluid extraction (SFE) is combined with supercritical fluid reaction (SFR) in an analytical mode to assess tall oil products for their fatty or resin acid content or both. The SFR consists of an inline enzymatically catalyzed reaction in which a lipase transesterifies specific lipids with methanol. The SFE-SFR sequence is conducted employing commercially available extractors using supported lipases in the extraction cell to form methyl esters. In this study, six different commercially available lipases are screened for activity. The SFE-SFR extracts are analyzed by capillary gas chromatography and supercritical fluid chromatography and then compared with tall oil products derivatized by conventional chemical derivatization techniques.     

Supercritical fluid extraction for the separation of organochlorine pesticides residue in Angelica sinensis

A method involving the simultaneous extraction and separation of 12 organochlorine pesticides (OCPs) from Angelicae sinensis was developed using supercritical fluid extraction (SFE). The pesticides in the study were alpha-, beta-, gamma- and delta-benzene hexachloride, PCNB (pentachloro- nitrobenzene), PCA (pentachloroaniline), HEPT (heptachlor), MPCPS (methyl-pentachlorophenyl sulfide), pp'-DDE [1,1-dichloro-2,2-bis (p-chlorophenyl) ethylene], op'-DDT [1,1,1,-trichloro-2-(o-chlorophenyl)-2-(p-chlorophenyl) ethane], pp'-DDD [1,1-dichloro-2,2-bis(p-chlorophenyl) ethane], and pp'-DDT [1,1,1,-trichloro-2,2-bis (p-chlorophenyl)ethane]. The extraction conditions were optimized as follows: pure CO(2), extraction pressure 15 MPa, extraction temperature 60 degrees C, extraction time 20 min, and flow-rate 1.5 mL/min. A GC method with electron capture detection was employed to determine the OCPs in Angelicae sinensis. An HPLC method was developed for the quantitative determination of active constituents. The SFE provided high decontamination rate of OCPs and low loss of active constituents in Angelicae sinensis.     

Extraction of kiwi seed oil: Soxhlet versus four different non-conventional techniques

Kiwi seed oil has a nutritionally interesting fatty acid profile, but a rather low oxidative stability, which requires careful extraction procedures and adequate packaging and storage. For these reasons and with the aim to achieve process intensification with shorter extraction time, lower energy consumption and higher yields, four different non-conventional techniques were experimented. Kiwi seeds were extracted in hexane using classic Soxhlet as well as under power ultrasound (US), microwaves (MWs; closed vessel) and MW-integrated Soxhlet. Supercritical CO? was also employed and compared to the other techniques in term of yield, extraction time, fatty acid profiles and organoleptic properties. All these non-conventional techniques are fast, effective and safe. A sensory evaluation test showed the presence of off-flavours in oil samples extracted by Soxhlet and US, an indicator of partial degradation.     

Comparison of Different Extraction Processes on the Physicochemical Properties,Nutritional Components and Antioxidant Ability of Xanthoceras sorbifolia Bunge Kernel Oil

In this study, we investigated and compared the oil yield, physicochemical properties, fatty acid composition, nutrient content, and antioxidant ability of Xanthoceras sorbifolia Bunge (X. sorbifolia) kernel oils obtained by cold-pressing (CP), hexane extraction (HE), aqueous enzymatic extraction (AEE), and supercritical fluid extraction (SFE). The results indicated that X. sorbifolia oil contained a high percentage of monounsaturated fatty acids (49.31–50.38%), especially oleic acid (30.73–30.98%) and nervonic acid (2.73–3.09%) and that the extraction methods had little effect on the composition and content of fatty acids. X. sorbifolia oil is an excellent source of nervonic acid. Additionally, the HE method resulted in the highest oil yield (98.04%), oxidation stability index (9.20 h), tocopherol content (530.15 mg/kg) and sterol content (2104.07 mg/kg). The DPPH scavenging activity rates of the oil produced by SFE was the highest. Considering the health and nutritional value of oils, HE is a promising method for X. sorbifolia oil processing. According to multiple linear regression analysis, the antioxidant capacity of the oil was negatively correlated with sterol and stearic acid content and positively correlated with linoleic acid, arachidic acid and polyunsaturated fatty acid content. This information is important for improving the nutritional value and industrial production of X. sorbifolia.     

Supercritical fluid CO₂ extraction of Acorus calamus L. (Arales: Araceae) and its contact toxicity to Sitophilus zeamais Motschusky (Coleoptera: Curculionidae)

Contact toxicities of Acorus calamus L. (Arales: Araceae) extracts obtained from four published extraction methods: soakage, soxhlet, ultrasonic and supercritical fluid CO? (SFE-CO?), were compared in this study. Under the given extraction conditions, SFE-CO? extract exhibited the highest contact toxicity against S. zeamais of the four methods. With the SFE-CO? method, extraction temperature, pressure, time and the amount of EtOH (the extraction solvent) were identified as having a significant effect on the extract. Orthogonal experiments showed that the optimal extraction parameters were: temperature--55°C, pressure--35?MPa, time--40?min and EtOH--150?mL per 200?g of dry powder. Under these conditions, the yield was 4.12% and the LD?? of the extract against S. zeamais after 96?h of treatment was 27.26?μg?cm?2. β-asarone was the dominant component of the extract derived from the SFE-CO? method, accounting for 24.39% of the extract. These results may contribute to the designing of large-scale production processes for obtaining A. calamus extract, which proves to be an effective alternative for the control of stored product insect pests.     

Characterization of Volatile Flavor Compounds in Supercritical Fluid Separated and Identified in Gurum (Citrulluslanatus Var. colocynthoide) Seed Oil Using HSME and GC–MS

In this study, the volatile compound profiles of gurum seed oil were determined using two methods: supercritical CO₂ extraction (SFE) and the screw press process (SPP). For volatile compounds extraction and identification, headspace solid-phase micro-extraction (HS-SPME) and GC–MS were used, respectively. A total number of 56 volatile compounds were revealed and identified in oil extracted by SFE, while only 40 compounds were detected in extracted oil by SPP. Acids, aldehydes, esters, ketones, furans, and other components were present in the highest ratio in oil extracted by SFE. In contrast, alcohols and alkenes were found in the highest proportion in oil extracted by SPP. In this study, it was observed that SFE showed an increase in the amounts of volatile compounds and favorably impacted the aroma of gurum seed oil. The results reveal that different extraction methods significantly impact the volatile components of gurum seed oil, and this study can help evaluate the quality of the oil extracted from gurum seeds.     

野西瓜种子油中脂肪酸的气相色谱-质谱分析

采用加速溶剂萃取及索氏提取法,用正己烷和乙醚为提取剂从野西瓜种子中提取油脂,经浓H2SO4催化,甲醇甲酯化处理后,以气相色谱-质谱联用技术鉴定出野西瓜种子中的脂肪酸主要组成为:油酸、亚油酸、硬脂酸等,其中不饱和脂肪酸总量占91.4%,主要成分油酸占73.3%。野西瓜种子油具有较高的营养价值,同时也可为生物柴油提供良好的原料。     

Supercritical fluid extraction of 2,4-D from soils using derivatization and ionic modifiers

Supercritical fluid extraction (SFE) with CO(2), a clean and rapid alternative to conventional organic solvent extraction techniques, was investigated for the extraction of 2,4-D from soils using a variety of pre-extraction soil treatments to enhance extraction recoveries. Initial experiments with silylation, ion-pairing, methyl esterification, and ionic displacement are reported. Methyl esterification and ionic displacement during SFE proved to be the most promising approaches for quantitative extraction. Although the SFE procedures were not fully optimized, comparison between SFE and a standard Soxhlet extraction method demonstrated the potential for improving analytical measurement for highly polar pesticides in soil by modifying SFE-CO(2) extraction with derivatizing reagents and ionic solutions.