PbI2对远红外Te基硫系玻璃光学性能的影响

用传统的熔融淬冷法制备了一系列新型Ge-Te-PbI₂硫系玻璃,并且讨论了玻璃的形成区域. 利用X射线衍射(XRD)、差热分析(DTA)、可见/近红外吸收光谱、红外透过光谱等技术,研究重金属卤化物PbI₂对Ge-Te硫系玻璃组成、结构和性能的影响. 利用Tauc方程计算了样品的直接和间接光学带隙,根据金属标准和能量带隙理论讨论了玻璃光学带隙与组分变化的关系. 结果表明:PbI₂的引入,提高了Te玻璃的形成能力,而且玻璃的热稳定性良好;随着PbI₂含量的增加,玻璃的密度和折射率均增大,光学带隙减小,短波吸收截止边发生红移,玻璃的红外截止波长基本不变,达到了25 μm. 该系列玻璃可用于制备远红外长波波导器件. 关键词： Te基玻璃 2')" href="#">PbI₂ 光学带隙 红外光谱     

Dy3+掺杂Ge-Ga-S-CsI玻璃中红外发光特性研究

用熔融淬冷法制备了系列掺杂浓度的Dy³⁺:Ge-Ga-S-CsI硫卤玻璃样品,测试了样品拉曼光谱、折射率、吸收光谱、近红外及中红外荧光谱.应用Judd-Ofelt理论计算了Dy³⁺离子的强度参数 (Ω_i, i=2,4,6)、自发辐射跃迁概率(A)、荧光分支比(β)、以及辐射寿命(τ_rad)等光谱参数.研究了810 nm激光抽运下样品中红 关键词： 硫系玻璃 中红外发光 3+掺杂')" href="#">Dy³⁺掺杂 多声子弛豫     

TeO2-Nb2O5-BaCl2玻璃的结构及光学性能研究

用传统熔融法制备了一种新型的氧氯碲酸盐玻璃:（90-x）TeO₂-10Nb₂O₅-xBaCl₂（x=10,20,30）,用密度比重天平、显微拉曼光谱仪、红外-可见-紫外分光光度计和棱镜耦合仪研究了组分变化对玻璃密度、结构、光学性质、折射率和色散的影响.研究结果表明:随玻璃中BaCl₂含量增加,玻璃密度出现了先增大后减小的现象;玻璃结构中双三角锥体[TeO₄]量减少,三角棱锥体[TeO₃]量增加;玻璃的折射率逐渐减小.新型的氧氯碲酸盐玻璃具有较高的线性折射率n_max=2.02259,非线性折射率N₂=6.8×10^-12esu与三阶非线性极化率χ^（3）=3.7×10^-13esu.制备的新型碲酸盐玻璃在可见和中红外光谱区具有高透过,在近紫外光谱区具有明显的吸收截止波长,且随BaCl₂含量增加吸收截止波长发生了明显的蓝移现象.利用经典的Tauc方程计算了玻璃样品的直接跃迁光学带隙和间接跃迁光学带隙,玻璃的光学带隙随BaCl₂含量增加而增大.     

关于Zn1-xBexO电子结构和光学性质的研究

采用基于密度泛函理论和平面波赝势技术的CASTEP程序对Zn_1-xBe_xO合金电子结构和光学性质进行了计算.当0≤x≤1,其带隙从0.963 eV变化到7.293 eV.分析了晶格畸变和能带间排斥效应对带隙的影响.当Be含量x=0.125,0.25,0.375,0.5,0.625,0.75时,a/b轴压应变控制着带隙变化;当x=0.875,1时,c轴压应变控制着带隙变化.能带间的p-d排斥影响价带顶变动,Γ_1v与Γ_1c之间排斥影响导带底变动.这些能带间的排斥效应被用来分析Zn_1-xBe_xO带隙变动.另外,也分析了Zn_1-xBe_xO介电函数虚部ε₂. 关键词： 带结构 光学性质 应变 排斥     

Er3+/Yb3+共掺碲硼硅酸盐玻璃的光谱性质和热稳定性研究

制备了系列Er³⁺/Yb³⁺共掺碲硼硅酸盐玻璃样品(85-x)TeO₂-15B₂O₃-xSiO₂ (TBS x=0,5,10,15,20 mol%).测试和分析了样品的吸收光谱、荧光光谱、能级寿命、红外透射光谱及差热特性.并通过对Er³⁺离子⁴I_13/2→⁴I_15/2跃迁发射谱线的高斯拟合，设计了一个简单的四能级结构估算了Er³⁺离子⁴I_13/2和⁴I_15/2能级在碲硼硅酸盐中的Stark分裂情况.研究表明SiO₂的引入能有效地改善玻璃的热稳定性和光谱性能，玻璃析晶温度T_x与玻璃转变温度T_g之差(ΔT=T_x-T_g)可达178℃，说明碲硼硅酸盐是一种适合于光纤拉制的玻璃基质材料.比较了不同基质玻璃中Er³⁺离子的荧光半高宽和受激发射截面，结果表明TBS玻璃系统具有较好的带宽性能，是一种优良的宽带光纤放大器候选基质材料. 关键词： 碲硼硅酸盐 热稳定性 高斯拟合 -基')" href="#">OH^-基     

新型远红外Ge-Ga-Te-KBr硫系玻璃性能研究

用传统的熔融淬冷法制备了远红外Te基硫系玻璃(Ge15Ga10Te75)100-x(KBr)x(x=2、4、6、8mol%).利用X射线衍射仪、差示扫描量热仪等设备测试玻璃的结构和物化性质,分析了引入KBr对Te玻璃的结构、化学和物理热稳定性等方面的影响;利用分光光度计、红外光谱仪等光学方法研究了该类Te玻璃的光谱性质,分析了KBr对该类玻璃的短波吸收和红外透过光谱的影响;利用Tauc方程估算了玻璃样品直接和间接的光学带隙.实验结果表明:随着KBr含量的增加,玻璃的短波截止边发生红移,而红外截止边基本没有发生变化,该组玻璃始终保持较宽的红外透过范围.     

电子回旋共振等离子体增强沉积氟化非晶碳薄膜的光学性质

用紫外可见光透射光谱(UV-VIS)并结合键结构的X射线光电子能谱(XPS)和红外谱(FTIR)分析,研究了电子回旋共振等离子体增强化学气相沉积法制备的氟化非晶碳薄膜的光吸收和光学带隙性质.在微波功率为140—700W、源气体CHF₃∶C₆H₆比例为1∶1—10∶1条件下沉积的薄膜,光学带隙在1.76—2.85eV之间.薄膜中氟的引入对吸收边和光学带隙产生较大的影响,吸收边随氟含量的提高而增大,光学带隙则主要取决于CF键的含量,是由于强电负 关键词： 氟化非晶碳薄膜 光吸收与光学带隙 电子回旋共振等离子体     

WO3对掺铒碲酸盐玻璃光谱性质的影响

制备了掺铒碲钨酸盐玻璃(80-x)TeO₂-(10+x)WO₃-8BaO-2Na₂O-0.5Er₂O₃(x=0,5,10,15,20)玻璃,研究了WO₃对掺铒碲钨酸盐玻璃的光谱性质. 研究发现：随着WO₃含量的增加,Ω₄,Ω₆先增加后减小,受 关键词： 碲钨酸盐玻璃 3+光谱性质')" href="#">Er³⁺光谱性质 Judd-Offelt理论     

GeS2-In2S3硫系玻璃的物化性质与晶化行为研究

认识玻璃组成-性能-结构之间关系是玻璃科学中经久不衰的研究课题之一. 在制得(100-x) GeS₂-xIn₂S₃ (x=10, 15, 20, 25或30 mol%) 系列玻璃和玻璃陶瓷样品的基础上, 利用可见-近红外透过光谱, DSC, XRD和Raman光谱等测试技术表征了随组份变化的光学带隙, 玻璃转变温度以及晶化行为等, 并结合GeS₂-Ga₂S₃玻璃研究结果探讨了Ga, In 元素及其形成的网络结构对玻璃性质的影响.研究发现, 在硫系玻璃中In比Ga对光学带隙和玻璃转变温度等性质的影响要大. 它们所形成玻璃的晶化行为也截然不同, 但与其各自的材料相图有着密切的联系. 利用偏振拉曼光谱获得玻璃网络中的基本结构单元信息.最后, 结合材料相图, 玻璃随组成变化的物化性质和晶化行为以及基本网络结构单元的认识, 探讨了玻璃的化学拓扑与网络拓扑之间的联系, 为今后研究提供一种新的研究思路.     

20GeS2·80Sb2S3硫系玻璃的析晶行为及动力学机理研究

实现玻璃微晶化过程控制的基础是要充分认识其析晶行为及动力学机理. 利用示差扫描量热法和析晶热处理等手段, 研究发现 20GeS₂·80Sb₂S₃硫系玻璃属于表面析晶, 在268℃(T_g+30℃)下热处理60 h, 可以获得表面约40 μm的Sb₂S₃晶层复合玻璃陶瓷样品. 在此基础上, 利用非等温法从理论上分析该玻璃的析晶动力学机理. 计算得到其析晶活化能E_c为(223.6±24.1)kJ·mol^-1, 在热处理温度(268℃)下的析晶速率常数K为1.23×10^-4 s^-1, 属于较难析晶的玻璃组成; 玻璃的晶体生长指数m和晶体生长维数n均为2, 表明其Sb₂S₃相的析晶行为是二维生长过程, 与析晶实验结果完全相符. 由此可知, 对于Sb₂S₃晶体复合的硫系玻璃陶瓷样品可通过玻璃粉末压片烧结、带铸法或丝网印刷法制备获得, 为今后功能硫系玻璃的开发提供实验依据和理论指导. 关键词： 硫系玻璃 微晶化 析晶动力学 析晶行为     

Influence of the selenium content on thermo-mechanical and optical properties of Ge–Ga–Sb–S chalcogenide glasses

A number of Ge₁₇Ga₄Sb₁₀S_69−xSe_x (x = 0, 15, 30, 45, 60, and 69) chalcogenide glasses have been synthesized by a melt-quenching method to investigate the effect of the Se content on thermo-mechanical and optical properties of these glasses. While it was found that the glass transition temperature (T_g) decreases from 261 to 174 °C with increasing Se contents, crystallization temperature (T_c) peak only be observed in glasses with Se content of x = 45. It was evident from the measurements of structural and physical properties that changes of the glass network bring an apparent impact on the glass properties. Also, the substitution of Se for S in Ge–Ga–Sb glasses can significantly improve the thermal stability against crystallization and broaden the infrared transmission region.     

新型GeSe2-In2Se3-AgI玻璃性能研究

采用传统熔融-淬冷法制备了一系列新型(100-x) (4GeSe₂-In₂Se₃) -xAgI(x=20,30,40 mol%)硫系玻璃样品.利用X射线衍射分析、差热分析、可见-近红外吸收光谱、红外透过光谱、喇曼分析等技术手段研究了该玻璃系统的组成、结构、热稳定性和光学特性等.利用Tauc方程计算出了样品的间接带隙;测试了部分样品在不同升温速率下的差示扫描量热曲线,并采用Kissinger法计算了玻璃样品的析晶活化能.X射线衍射数据表明,该玻璃体系在较宽的组分范围内有良好的非晶特性,成玻范围较宽;差热分析和析晶动力学研究表明,玻璃样品70(4GeSe₂-In₂Se₃)-30AgI具有较好的热稳定性(ΔT=114℃)和较高的活化能(E_a=320.4 kJ/mol).随着AgI含量的增加,玻璃的短波吸收限蓝移,并且光学带隙有增大的趋势.此外,红外透过光谱分析表明该玻璃体系具有良好的红外透过性能,其红外截止波长不会随着AgI含量的增加而发生明显变化,皆为16μm左右.     

新型GeS_2-Ga_2S_3-KI玻璃性能的研究

用传统熔融淬冷法制备了新型硫卤玻璃(100-x)(80GeS2-20Ga2S3)-xKI(x=0,10,20mol%).利用差热分析、可见/近红外吸收光谱、红外透射光谱等技术对准三元硫卤玻璃体系GeS2-Ga2S3-KI的组成、结构和性能关系进行了研究.分析结果表明:GeS2-Ga2S3-KI三元系统玻璃具有较宽的玻璃形成区;当KI的含量为10mol%时,玻璃热稳定性最好;随着KI的加入,玻璃的红外截止波长无明显变化,皆为12.5μm;然而随着局域电位场的增大,玻璃的短波吸收限向短波方向发生了移动,光学带隙存在增大趋势.     

Glass formation and properties of GeTe4-Ga2Te3-AgX (X = I/Br/Cl) far infrared transmitting chalcohalide glasses

A new family of Tellurium-based glasses GeTe₄-Ga₂Te₃-AgX (X = I/Br/Cl) has been investigated and the glass-forming region was determined. Properties measurements include XRD, DTA, vis-NIR, and IR transmission spectra. The amorphous nature of the glasses has been proved by X-ray diffraction. Among the three systems, the GeTe₄-Ga₂Te₃-AgI glass system shows superior glass-forming ability and thermal stability. The maximum value of ΔT (= T_x − T_g) lies at about 110 °C for the glass composition 60GeTe₄-2-20Ga₂Te₃-20AgI, while for 60GeTe₄-20Ga₂Te₃-20AgBr and 60GeTe₄-20Ga₂Te₃-20AgCl, the ΔT values are both only 88 °C. Most of the studied glasses have a wide optical transmission window from 1.8 to 25 μm.     

New alkali antimonate glasses

Glass formation has been investigated in ternary systems Sb₂O₃-PbO-M₂O in which M is alkali Li, Na and K and antimony oxide is the glass former. Alkali elements were introduced as carbonates. The size of the glass forming region is enlarged as alkali ionic radius increases. Binary Sb₂O₃-M₂O glasses were obtained: (100−x) Sb₂O₃-xLi₂O, (10<x<30), (100−x) Sb₂O₃-xNa₂O, (10<x<70), and (100−x) Sb₂O₃-xK₂O, (10<x<90). In ternary systems, PbO content could reach 60 mol%. Temperatures of glass transition, T_g, onset of crystallization, T_x, and maximum of crystallization, T_p, have been measured using differential scanning calorimetry. Depending on composition, glass transition temperature ranges from 240 to 330 °C. The incorporation of alkali oxide increases T_g while lead oxide has the reverse effect. Thermal stability range (T_x-T_g) was usually between 65 and 266 °C, while no crystallization exotherm was observed in some cases. Density and thermal expansion increases as lead concentration increases. Optical transmission has been measured. The UV cut-off depends on alkali content: samples are yellow and turn green for large K and Na content. These glasses have potential applications as low phonon energy glasses for infrared transmission or active devices.     

Influence of Ag2O on crystallisation and structural modifications of phosphate glasses

A series of phosphate glasses of composition 45P₂O₅–(40???x)CaO–15Na₂O–xAg₂O (x?=?0, 3, 6, 8, 10 and 12?mol%) with different Ag₂O contents were prepared using the melt-quenching technique. The incorporated Ag₂O highly influenced the increase of its transition tendency towards crystallisation and, on contrary, reduced the degree of glassification of phosphate glasses. The lowering of glass transition temperature and increase in thermal expansion were observed in glasses against Ag₂O inclusions. The crystalline phase transitions of amorphous material during thermal treatment were confirmed by employing X-ray diffraction studies. As revealed by X-ray photoelectron spectroscopy, the incorporated silver oxide into phosphate glass exists in two different oxidation states, Ag₂O and AgO. The pyrophosphate and metaphosphate units were predominantly occupied in glass and glass ceramics. The elastic moduli and Vicker's hardness values exhibited the decrease in phosphate glass structural compactness due to Ag₂O-incorporation and these values were found to improve because of crystalline transitions.     

Effect of CuI on the formation and properties of Te-based far infrared transmitting chalcogenide glasses

A series of Ge–Te–CuI far infrared transmitting chalcohalide glasses were prepared by traditional melt-quenching method and the glass-forming region was determined. Properties measurements include density, DTA, XRD, SEM, Vis–NIR and infrared (IR) transmission spectra. The results show that with the addition of CuI, the glass-forming ability is improved and nearly 30 mol% CuI can be dissolved into the Ge₂₀Te_80?x(CuI)_x glass system. The density and glass transition temperature of Ge–Te–CuI chalcohalide glasses are within the range 5.459–5.960 g cm^?3 and 150–184 °C, respectively. These glasses all have wide optical transmission window from 1.8 to 25 μm and offer an alternative solution for far infrared transmitting materials.     

DSC and elastic moduli studies on tellurite-vanadate glasses containing antimony oxide

xSb₂O₃-40TeO₂-(60 − x) V₂O₅ glasses with 0 ≤ x ≤ 10 (in mol%) have been prepared by rapid- melt quenching method. DSC curves of these ternary glasses have been investigated. The glass transition properties that have been measured and reported in this paper, include the glass transition temperature (T _g ), glass transition width (ΔT _g ), heat capacity change at glass transition (ΔC _P ) and fragility (F). Thermal stability, Poisson’s ratio, fragility and glass forming tendency of these glasses have been estimated, to determine relationship between chemical composition and the thermal stability or to interpret the structure of glass. In addition, Makishima and Makenzie’s theory was applied for determination of Young’s modulus, bulk modulus and shear modulus, indicating a strong relation between elastic properties and structure of glass. Generally, results of this work show that glass with x = 0 has the highest shear, bulk and Young’s moduli which make it as suitable candidate for the manufacture of strong glass fibers in technological applications; but it should be mentioned that glass with x = 8 has higher handling temperature and super resistance against thermal attack.     

Ga2O3组分对Tm3+掺杂GeO2-Ga2O3-Li2O-BaO-La2O3玻璃的光谱性能影响

制备了Tm³⁺(8.0mol%)掺杂(77-x)GeO₂-xGa₂O₃-8Li₂O-10BaO-5La₂O₃(x=4,8,12,16)系列玻璃.系统地研究了Ga₂O₃从4mol%变化到16mol%时,玻璃的光谱性质与热学性质的变化规律.差热分析表明,随着Ga₂O₃含量的增加,锗酸盐玻璃的热稳定性增加.运用Judd-Ofelt(J_O)理论计算得到了Tm³⁺在不同Ga₂O₃含量的GeO₂-Ga₂O₃-Li₂O-BaO-La₂O₃玻璃中的J-O强度参数(Ω₂,Ω₄,Ω₆)及Tm³⁺各激发能级的自发跃迁概率、荧光分支比以及辐射寿命等光谱参量.在808nm激光二极管的激发下,测试并分析了Ga₂O₃对Tm³⁺荧光光谱特性的影响.随着Ga₂O₃从4mol%增加到16mol%,Tm³⁺在1.8μm处的荧光强度呈现先减弱后增强的特性.当Ga₂O₃含量大约在12mol%时,Tm³⁺在1.8μm处的荧光强度最弱,受激发射截面达到最小.还初步讨论了Ga₂O₃对玻璃结构与光谱参数的影响规律. 关键词： 3+掺杂锗酸盐玻璃')" href="#">Tm³⁺掺杂锗酸盐玻璃 光谱性能 Judd-Ofelt参数 热稳定性