Regiospecific topochemical reactions controlled by trifluoromethyl directing groups

A parallel, offset-stacked orientation was found in the crystal packing of E,E-1,4-di(o-trifluoromethyl)phenyl-1,3-butadiene. UV-irradiation of the powered crystalline sample resulted in a quantitative conversion to a single [2 + 2] cycloaddition product.     

Synthesis of unsymmetrical substituted 1,4-dihydropyridines through thermal and microwave assisted [4+2] cycloadditions of 1-azadienes and allenic esters

Thermal and microwave assisted [4+2] cycloadditions of 1,4-diaryl-1-aza-1,3-butadienes with allenic esters lead to cycloadducts, which after a 1,3-H shift afford variedly substituted unsymmetrical 2-alkyl-1,4-diaryl-3-ethoxycarbonyl-1,4-dihydropyridines in high yields. Reactions carried out under microwave irradiation are cleaner and give higher yields with much shortened reaction times. Density functional theory (DFT) at the B3LYP/6-31G* level has been used to calculate geometric features of the reactants, barrier for s-trans to s-cis and reverse isomerization of azadienes (5a-d, 10a-e), dihedral angles between N(1), C(2), C(3), and C(4) atoms of azadienes along with various indices such as chemical hardness (eta), chemical potential (micro), global electrophilicity (omega), and the difference in global electrophilicity (Deltaomega) between the reacting pairs and Fukui functions (f (+) and f(-)). The results revealed that s-trans is the predominant conformation of azadienes at ambient temperature and the barrier for conversion of the s-trans rotamer of 1-azadienes to s-cis may be the major factor influencing the chemoselectivity, i.e., [4+2] verses [2+2] cycloaddition. The regiochemistry of the observed cycloadditions is collated with the obtained local electrophilicity indices (Fukui functions). Transition states for the formation of both [4+2] and [2+2] cycloadducts as located at the PM3 level indicate that the transition state for the formation of [4+2] cycloadducts has lower energy, again supporting the earlier conclusion that preferred formation of [4+2] cycloaaducts at higher temperature may be a consequence of barrier for s-trans to s-cis transformation of 1-azadienes.     

Nickel-catalyzed dehydrogenative [4 + 2] cycloaddition of 1,3-dienes with nitriles

Pyridines, which comprise one of the most important classes of the six-membered heterocyclic compounds, are widely distributed in nature, and the transition-metal-catalyzed [2 + 2 + 2] cycloaddition reaction of two alkynes and a nitrile is one of the most powerful methods for preparing versatile, highly substituted pyridine derivatives. However, the lack of chemo- and regioselectivity is still a crucial issue associated with fully intermolecular [2 + 2 + 2] cycloaddition. The present study developed the Ni(0)-catalyzed intermolecular dehydrogenative [4 + 2] cycloaddition reaction of 1,3-butadienes with nitriles to give a variety of pyridines regioselectively.     

[4 + 2]-Cycloadditionen von α,β-ungesättigten Hydrazonen. Teil 1. Pyridin-2,3-dicarboximide aus 1-(Dimethylamino)-1,4-dihydropyridin-Derivaten

[4 + 2] Cycloadditions of α,β-Unsaturated Hydrazones to Pyridine-2,3-dicarboximides via 1-(Dimethylamino)-1,4-dihydropyridine Derivatives The [4 + 2] Cycloaddition of α,β-unsaturated hydrazones of type 1 (1-aza-1,3-butadienes) with 2-halogenomaleimides 4 affords 1,4-dihydropyridines 6 which, after treatment with an acid, yield highly substituted pyridine-2,3-dicarboximide derivatives 7 (Scheme 1).     

[6+2]Cycloadditions catalyzed by titanium complexes

The Ziegler catalyst TiCl₄-Et₂AlCl and the arenetitanium(II) complex (η6-C₆H₆)Ti(II)(AlCl₄)₂ induce [6 + 2]cycloaddition reactions of cycloheptatriene with dienes and acetylenes. Addition to 1,3-butadiene affords 7 - endo - vinyl - bicyclo[4.2.1]nona - 2,4 - diene (main product) and bicyclo[4.4.1]- undeca - 2,4,8 - triene, a product of [6+4]cycloaddition. Isoprene reacts similarly, yielding mainly 7- endo - isopropenyl - bicyclo[4.2.1]nona - 2,4 - diene. 2,3 - Dimethyl - 1,3 - butadiene gives 8,9dimethylbicyclo [4.4.1]undeca - 2,4,8 - triene, a product of [6 + 4]cycloaddition, while [6 + 2]cross-adducts are minor products. The reaction of cycloheptatriene with norbornadiene gives mainly hexacyclo[6.5.1.0^2,7.0^3,12.^6,10.0^9,13]tetradec - 4 - ene via [6+2]cycloaddition followed by intramolecular Diels-Alder reaction. As a by-product, pentacyclo[7.5.0.0^2,7.0^3,5.0⁴⁸]tetradeca - 10,12 - diene is formed by a [2+2+2]mechanism. Addition of cycloheptatriene to diphenylacetylene and bis - (tri- methylsilyl)acetylene furnishes sustituted bicyclo[4.2.1]nona - 2,4,7 - trienes. Alkenes, E,E-2,4 - hexadiene and 1,3 - cyclooctadiene are unreactive. The [6+2]cycloaddition is made possible by coordination of cycloheptatriene to titanium, which changes the symmetry of the frontier orbitals in the triene. The reactivity of the trienophile is also enhanced by coordination to the catalyst.     

New thiopyran-4-spiro-2′-(1,3-dithiolane):Formation mechanism and crystal structure

Ethylene trithiocarbonate reacted with dimethyl acetylenedicarboxylate to furnish tetramethyl thiopyran-4-spiro-2'-(1,3- dithiolane)-2,3,5,6-tetracarboxylate,a new thiopyran-4-spiro-2'-(1,3-dithiolane) heterocyclic compound,as the minor product together with the major product dimethyl 2-thioxo-1,3-dithiole-4,5-dicarboxylate.The new heterocycle was probably formed through a[2 + 2]cycloaddition between ethylene trithiocarbonate and dimethyl acetylenedicarboxylate followed by a 1,3-dipolar cycloaddition or[...     

Preparation of partially substituted 1-halo- and 1,4-dihalo-1,3-dienes via reagent-controlled desilylation of halogenated 1,3-dienes

Depending on the desilylation reagents used, 1-halo-1,4-bis(trimethylsilyl)-1,3-butadienes afforded either 1-halo-1-trimethylsilyl-1,3-butadienes or 1-halo-4-trimethylsilyl-1,3-butadienes in excellent yields with excellent selectivity, respectively, when treated with CF3COOH or with NaOMe. These monosilylated 1,3-butadiene products could be further desilylated to generate their corresponding halobutadienes via the above reagent-controlled desilylation reaction. When 1,4-dihalo-1,4-bis(trimethylsilyl)-1,3-dienes were treated with MeONa/MeOH at room temperature, desilylation of both of the two trimethylsilyl groups took place to afford their corresponding 1,4-dihalo-1,3-dienes in excellent yields. The commonly used desilylation reagent CF3COOH did not work for these dihalobutadienes.     

[4+2]-Cycloadditionen von α,β-ungesättigten Hydrazonen. Teil 2. Pyridin-2,3-dicarboximide aus 1,4-Dihydropyridin-Derivaten

[4+2] Cycloaddition of α,β-Unsaturated Hydrazones to Pyridine-2,3-dicarboximides via 1,4-Dihydropyridine Derivatives The [4 + 2] cycloaddition of α,β-unsaturated hydrazones of type 1 (1-aza-1,2-butadienes) with maleimides (e.g. 2b ) affords the tetrahydropyridines of type 8. Elimination of dimethylamine to 9 is easily achieved by treatment of 8 with silica gel at elevated temperature. Oxidation of the dihydropyridines 9 leads to highly substituted pyridine-2,3-dicarboxylic-acid dervatives 4 .     

[2 + 2] Cycloaddition Reactions of Butadienyl Ketene with 1,4‐Diazabuta‐1,3‐dienes: Synthesis of Functionalized Butadienyl‐4‐iminomethyl‐azetidin‐2‐ones and Butenylidene‐butadienyl‐[2,2′‐biazetidine]‐4,4′‐diones

The reactions of butadienylketene with variety of 1,4‐diazabuta‐1,3‐dienes are studied. The reactions resulted in the formation of previously unknown functionalized cis butadienyl‐4‐iminomethyl‐azetidin‐2‐ones and butenylidene‐butadienyl‐[2,2′‐biazetidine]‐4,4′‐ diones. Butadienyl ketene reacts in [2+2] cycloaddition fashion with both iminic portion of 1,4‐ diazabuta‐1,3‐dienes and competitive [4+2] cycloaddition reaction of 1,4‐diazabuta‐1,3‐dienes as 4π component with butadienyl ketene as 2π component are not observed.     

Cycloaddition of Alkenes and Alkynes to the P-centered Singlet Biradical [P(μ-NTer)]2

The reaction of biradical [P(μ-NTer)]₂ ( 1 , Ter = 2,6-bis(2,4,6-trimethylphenyl)phenyl) towards different alkenes (R = 2,3-dimethyl–butadiene, 2,5-dimethyl-2,4-hexadiene, 1,7-octadiene, 1,4-cyclohexadiene) and alkynes (R = 1,4-diphenyl-1,3-butadiyne) was studied experimentally. Although these olefins can react in different ways, only [2+2] cycloaddition products ( 1R ) were observed. The reaction with 2,3-dimethylbutadiene also led to the [2+2] product ( 1dmb ). Thermal treatment of 1dmb above 140 °C resulted in the recovery of biradical 1 upon homolytic bond cleavage of the two P–C bonds and the release of 2,3-dimethylbutadiene. In contrast to this reaction, all other [2+2] additions products ( 1R , R = 1,7-octadiene, 1,4-cyclohexadiene, 1,4-diphenyl-1,3-butadiyne) began to decompose at temperatures between 200 °C and 300 °C. Only unidentified products were obtained but no temperature-controlled equilibrium reactions were observed. Computations were carried out to shed light into the formal [2+2] as well as the possible [4+2] addition reaction.     

Synergic effect of vicinal stereocenters in [3 + 2] cycloadditions of carbohydrate azadipolarophiles and mesoionic dipoles: origin of diastereofacial selectivity.

The intermolecular [3 + 2] cycloaddition of carbohydrate-derived 1,2-diaza-1,3-butadienes and 1,3-thiazolium-4-olates provides a conceptual basis for the problem of diastereofacial preference in the acyclic series of unsaturated sugars. Experimental results employing a side chain of D-arabino configuration have shown the stereodifferentiation exerted by the first stereogenic center that renders the Re,Re face of the acyclic sugar-chain azadiene eligible for cycloaddition (J. Org. Chem. 2000, 65, 5089). The results of the present work, now utilizing an alternative framework of D-lyxo configuration, evidence the discriminating power of the second stereogenic carbon, which induces the preferential approach to the Re,Si face of the heterocyclic dipole. This scheme of face selectivity is also grounded in theoretical calculations at a semiempirical level. In addition to dihydrothiophenes, which are the expected products of the [3 + 2] cycloaddition, bicyclic systems based on dihydrothieno[2,3-c]piperidine skeleton can also be obtained.     

An efficient one-pot synthesis of spiro dihydrofuran oxindole and spiro 2-hydroxytetrahydrofuran oxindole derivatives via (3+2) oxidative cycloaddition mediated by CAN

Spiro dihydrofuran oxindole derivatives were prepared via a (3+2) oxidative cycloaddition of 1,3-dicarbonyl compounds to 3-(phenyl-2-oxoethylidene)-1-methyloxindole and 3-benzylidene-1-methyloxindole derivatives mediated by ceric ammonium nitrate. In the case of the reaction of 3-(phenyl-2-oxoethylidene)-1-methyloxindole derivatives with acyclic 1,3-dicarbonyl compounds, spiro 2-hydroxytetrahydrofuran oxindole derivatives were obtained.     

Cycloadditions of Diarylgermylenes to a Diazabutadiene [1]

The reaction of tetrakis(2‐tert‐butyl‐4,5,6‐trimethylphenyl)digermene, which dissociates into the germylene molecules 2 in solution, with 1,4‐diisopropyl‐1,4‐diazabuta‐1,3‐diene ( 3 ) furnishes the [4+1] cycloaddition product of 2 to the nitrogen atoms of 3 . Under drastic conditions tetrakis(2,4,6‐triisopropylphenyl)digermene also forms the germylene molecules 6 which react with 3 in a similar fashion to afford the corresponding [4+1] cycloadduct.     

Synthesis of sterically encumbered and functionalized diaryl-diazenes by formal [3+3] cyclization of 2-aryldiazenyl-3-silyloxy-2-en-1-ones with 1,3-bis(silyloxy)-1,3-butadienes

Functionalized diaryl-diazenes (azo-dyes) were regioselectively prepared by formal [3+3] cyclization of 1,3-bis(silyloxy)-1,3-butadienes with 2-aryldiazenyl-3-silyloxy-2-en-1-ones.     

Regioselective synthesis of amino- and nitroarenes based on [3+3] cyclocondensations of 1,3-bis(silyloxy)-1,3-butadienes

Functionalized amino- and nitro-substituted biaryls and dibenzo[b,d]pyrid-6-ones (6(5H)-phenanthridinones) were prepared by [3+3]cyclocondensation of 1,3-bis(trimethylsilyloxy)-1,3-butadienes with nitro-substituted 1-aryl-1-silyloxy-1-en-3-ones and subsequent hydrogenation. 4-Nitro- and 4-aminophenols were prepared based on formal [3+3] cyclizations of 1,3-bis(trimethylsilyloxy)-1,3-butadienes with 3-ethoxy-2-nitro-2-en-1-ones.     

Diastereoselective intermolecular rhodium-catalyzed [4 + 2 + 2] carbocyclization reactions: computational and experimental evidence for the intermediacy of an alternative metallacycle intermediate

Intermolecular rhodium-catalyzed [m + n + o] reactions of 1,6-enynes and various pi-components (carbon monoxide, alkynes, 1,3-butadienes, etc.) provide an expeditious approach for the construction of polycyclic fragments that represent important synthons for target-directed synthesis. We present computational and experimental evidence for the existence of a previously undescribed reaction pathway for the rhodium-catalyzed [4 + 2 + 2] reaction involving a 1,6-enyne. This model clearly demonstrates the origin of the excellent diastereoselectivity in this type of reaction and the remarkable tolerance of both (E)- and (Z)-isomers within the 1,6-enyne, which is generally prone to competitive ene-cycloisomerization.     

First synthesis of 4-(arylsulfonyl)phenols by regioselective [3+3] cyclocondensations of 1,3-bis(silyloxy)-1,3-butadienes with 2-arylsulfonyl-3-ethoxy-2-en-1-ones

The formal [3+3] cyclization of 1,3-bis(silyloxy)-1,3-butadienes with readily available 2-arylsulfonyl-3-ethoxy-2-en-1-ones resulted in regioselective formation of 4-(arylsulfonyl)phenols.     

Pyridyl-substituted [1,3]Dithiolo-[4,5-<Emphasis Type="Italic">b</Emphasis>][1,4]dithiine-2-thiones

We have obtained 5-(2-pyridyl)[1,3]dithiolo[4,5-b][1,4]dithiine-2-thione for the first time by cycloaddition of 2-ethynylpyridine to 4,5-dihydro-1,3-dithioltrithione (isotrithionedithiol). We have studied this thione, 5-(2-pyridyl)- and 5-(4-pyridyl)-5,6-dihydro[1,3]dithiolo[4,5-b][1,4]dithiine-2-thiones by mass spectroscopy and also IR, UV, ¹H and ¹³C NMR spectra. We have determined the crystal and molecular structure of 5-(2-pyridyl)-5,6-dihydro[1,3]dithiolo[4,5-b][1,4]dithiine-2-thione.__________Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 429–434, March, 2005.     

Rh-catalyzed intermolecular and enantioselective [4 + 2] cycloaddition of 1,3-dienes with dimethyl acetylenedicarboxylate

A Rh-BINAP complex catalyzed an intermolecular and enantioselective [4 + 2] cycloaddition of 1-monosubstituted, 1,1- or 1,2-disubstituted buta-1,3-dienes with dimethyl acetylenedicarboxylate to give chiral cyclohexa-1,4-dienes.     

Regioselective synthesis of functionalized 4-nitro- and 4-amino-phenols based on formal [3+3] cyclocondensations of 3-ethoxy-2-nitro-2-en-1-ones with 1,3-bis(silyloxy)-1,3-butadienes

Functionalized 4-nitro- and 4-aminophenols were regioselectively prepared based on [3+3] cyclizations of 1,3-bis(trimethylsilyloxy)-1,3-butadienes with 3-ethoxy-2-nitro-2-en-1-ones.