Direct synthesis of phenols by iron-catalyzed biphasic oxidation of aromatic hydrocarbons with hydrogen peroxide

The hydroxylation of a series of aromatic hydrocarbons with hydrogen peroxide, catalyzed by iron complexes with pyrazine-3-carboxylic acid N-oxide, was investigated, operating in a biphasic reaction medium.

The new catalyst showed a high selectivity to the corresponding phenols, minimizing the over-oxidation reactions to polyoxygenated derivatives and tars which, along with dimers formation, are the major limitations of the classical Fenton’s reagent for a practical synthetic application.

In the case of alkylbenzenes, the competitive side chain oxidation at the benzylic positions also occurred. Electron rich substrates, such as anisole, were oxidized with very poor selectivity.

The reactions were carried out in a biphasic system that allows a convenient recovery and recycling of the catalyst by phase separation techniques. The catalyst showed a complete retention of activity after six consecutive reaction cycles.

The new catalyst appears as a promising tool for the direct synthesis of phenols, in alternative to the conventional multi-step methods.     

Oligosaccharide synthesis in microreactors

Described is the combination of microreactors and fluorous phase chemistry to assemble oligosaccharides. The synthesis of a beta-(1-->6) linked D-glucopyranoside homotetramer serves to illustrate this approach. Glycosylations employing a Fmoc-protected glucosyl phosphate building block were performed in a silicon-based micro-structured device to optimize reaction conditions and for reaction scale-up. A perfluorinated linker at the reducing end of the oligosaccharides allowed for purification by fluorous solid-phase extraction (FSPE) and further functionalization.     

Direct analysis of hydrogen peroxide by capillary electrophoresis

A method is described for analysis of hydrogen peroxide directly by CZE in borate buffer based on its absorption in UV light at 185 nm, without reaction with dyes. The absorption at 185 nm was about 3.5 times better than that at 214 nm. Hydrogen peroxide was generated enzymatically from glucose in aqueous solutions and in serum and was removed by the catalase enzyme. To improve the sensitivity of detection, samples were concentrated on the capillary based on stacking by ACN. The method is rapid (approximately 7 min) and specific.     

The synthesis of fluorinated materials in microreactors

Synthetic utilities of microreactor for the synthesis of fluorinated materials are described. In particular, synthesis of silylenol ether of 4,4,4-trifluorobutan-2-one and its synthetic application at room temperature. Further, nitroaldol reactions and Michael addition reaction in microreactor are convenient ways for the syntheses of difluoromethylated materials.     

Direct characterization of hydrogen peroxide bleached thermomechanical pulp using spectroscopic methods

The effects of thermomechanical pulp (TMP) bleaching with hydrogen peroxide under acidic and alkaline conditions were studied using different spectroscopic analytical methods. The results of hydroxyl radical determination in bleaching solutions, analyses of carbonyl and carboxyl groups contents in the pulp, and the cellulose fiber surface analysis by X-ray photoelectron spectroscopy (XPS) elucidate the chemistry of the hydrogen peroxide treatment. Diffuse reflectance laser flash photolysis (DRLFP) method showed the differences in the photochemical behavior that reflect the changes of the chromophoric system after the preliminary peroxide bleaching stage under acidic conditions. Fourier transform infrared (FTIR) spectroscopy confirmed the non-delignifying character of the bleaching process. Suppression of carbonyl and formation of carboxyl groups in the case of the two-stage peroxide bleaching performed in the presence of catalysts and stabilizers was also confirmed. FT-Raman studies showed the removal of coniferaldehyde groups after treatment under acidic and alkaline conditions.     

Nitroxide synthesis using the methyltrioxorhenium/hydrogen peroxide system

Some secondary amines of varying structural type have been oxidized by the methyltrioxorhenium/hydrogen peroxide system to the corresponding nitroxides in excellent yield. These results, coupled with our earlier work using this system, indicate the striking parallel between this chemistry and that of the dioxiranes. While the yields in the dioxirane and methyltrioxorhenium/hydrogen peroxide methods are comparable, the latter method must be regarded as superior since it is catalytic. © 1998 John Wiley & Sons, Inc. Heteroatom Chem 9:347–350, 1998     

Mesoporous nitrogen-doped carbon for the electrocatalytic synthesis of hydrogen peroxide

Mesoporous nitrogen-doped carbon derived from the ionic liquid N-butyl-3-methylpyridinium dicyanamide is a highly active, cheap, and selective metal-free catalyst for the electrochemical synthesis of hydrogen peroxide that has the potential for use in a safe, sustainable, and cheap flow-reactor-based method for H(2)O(2) production.     

Oxodiperoxo tungsten complex-catalyzed synthesis of adipic acid with hydrogen peroxide

An amphiphilic oxodiperoxo complex of tungsten using 8-quinolinol (QOH) as ligand has been synthesized and characterized by elemental analyses, gravimetry, chemistry titration, TG/DSC, IR and UV-vis spectroscopy. Oxidation of cyclohexene, cyclohexanol, cyclohexanone, cyclohexene oxide and 1,2-cyclohexane-diol to adipic acid in one-step was conducted by this complex catalyst using 30 wt.% hydrogen peroxide in the absence of organic solvent and phase-transfer catalyst. The effect of the reaction conditions on the oxidation of cyclohexene was studied by varying the amount of the catalyst, reaction temperature, reaction time and the amount of hydrogen peroxide. The results showed that oxodiperoxo tungsten complex with QOH as ligand could achieve 89.8% yield of adipic acid at 90°C by refluxing for 20 h.     

Polymerization model for hydrogen peroxide initiated synthesis of polypyrrole nanoparticles

A very simple, environmentally friendly, one-step oxidative polymerization route to fabricate polypyrrole (Ppy) nanoparticles of fixed size and morphology was developed and investigated. The herein proposed method is based on the application of sodium dodecyl sulfate and hydrogen peroxide, both easily degradable and cheap materials. The polymerization reaction is performed on 24 h time scale under standard conditions. We monitored a polaronic peak at 465 nm and estimated nanoparticle concentration during various stages of the reaction. Using this data we proposed a mechanism for Ppy nanoparticle formation in accordance with earlier emulsion polymerization mechanisms. Rates of various steps in the polymerization mechanism were accounted for and the resulting particles identified using atomic force microscopy. Application of Ppy nanoparticles prepared by the route presented here seems very promising for biomedical applications where biocompatibility is paramount. In addition, this kind of synthesis could be suitable for the development of solar cells, where very pure and low-cost conducting polymers are required.     

Direct and continuous synthesis of concentrated hydrogen peroxide by the gaseous reaction of H2/O2 non-equilibrium plasma

Under ambient conditions, H2O2 has been synthesized with 32.51% yield and 56.25% selectivity via the gas-phase reaction of H2/O2 non-equilibrium plasma.     

Palladium and gold-palladium catalysts for the direct synthesis of hydrogen peroxide

Today hydrogen peroxide is produced by an indirect process in which an alkyl anthraquinone is sequentially hydrogenated and oxidized. In this way hydrogen and oxygen are kept separate during the manufacturing process. A process where molecular oxygen is directly hydrogenated could be preferred if control of the sequential hydrogenation can be achieved, particularly if high rates can be attained under intrinsically safe, non-explosive conditions. Herein we describe recent progress in the direct synthesis of hydrogen peroxide using supported palladium and gold-palladium alloy catalysts and consider some of the problems that have to be overcome.     

Direct electrochemistry-based hydrogen peroxide biosensor formed from single-layer graphene nanoplatelet-enzyme composite film

A novel electrochemical sensing system for direct electrochemistry-based hydrogen peroxide biosensor was developed that relied on the virtues of excellent biocompatibility, conductivity and high sensitivity to the local perturbations of single-layer graphene nanoplatelet (SLGnP). To demonstrate the concept, the horseradish peroxidase (HRP) enzyme was selected as a model to form the SLGnP-TPA (tetrasodium 1,3,6,8-pyrenetetrasulfonic acid)-HRP composite film. The single-layer graphene composite film displayed a pair of well-defined and good reversible cyclic voltammetric peak for Fe(III)/Fe(II) redox couple of HRP, reflecting the enhancement for the direct electron transfer between the enzyme and the electrode surface. Analysis using electrochemical impedance spectroscopy (EIS) revealed that electrostatic attractions existed between graphene monolayers and enzyme molecules. The intimate graphene and enzyme interaction was also observed using scanning electron microscopy (SEM), which resulted in the special properties of the composite film. Ultraviolet visible spectroscopy (UV-vis) indicated the enzyme in the composite film retained its secondary structure similar to the native state. The composite film demonstrated excellent electrochemical responses for the electrocatalytic reduction of hydrogen peroxide (H₂O₂), thus suggesting its great potential applications in direct electrochemistry-based biosensors.     

Role of hydrogen peroxide in the synthesis of nitrogen heterocycle containing cobalt complexes

The reactions of Co(O₂CCH₃)₂·4H₂O with the sodium salt of p-toluene sulfonic acid (NapTS) and pyridine (py) or 4-methylpyridine (4mepy) in the presence of hydrogen peroxide in methanol led to the formation of [Co(py)₃(H₂O)₃](pTS)₂ or [Co(4mepy)₂(H₂O)₄](pTS)₂·MeOH, respectively. The coordination polymer [{Co(44′bpy)(H₂O)₄}(pTS)₂]_n (4,4′-bipyridine = 44′bpy) was obtained from the reaction of Co(O₂CCH₃)₂·4H₂O with 44′bpy in the presence of NapTS. The reaction of Co(O₂CCH₃)₂·4H₂O, 2,2′-bipyridine (22′bpy) and NapTS with hydrogen peroxide resulted in the formation of the dinuclear complex [Co₂(μ-OH)₂(μ-O₂CCH₃)(O₂CCH₃)₂(22′bpy)₂](pTS). Characterization of these complexes and the role of hydrogen peroxide in these reactions are discussed. Similar reactions with sodium sulfamate gave the mononuclear [Co(22′bpy)₂(O₂CCH₃)]NH₂SO₃·2H₂O complex and [Co₂(μ-OH)₂(μ-O₂CCH₃)(O₂CCH₃)₂(22′bpy)₂](NH₂SO₃).     

Liquid-phase synthesis of cyclic diene diepoxides using metal halides and hydrogen peroxide

Optimal conditions were found for induced hydroxyhalogenation of cyclic dienes (tetrahydroindene, 4-vinylcyclohexene and 5-vinyl- and 5-cyclohexenylbicyclo[2.2.1]hept-2-enes) in the system [MHlg-HA or HHlg]-H₂O₂ (or NaClO). Dehydrohalogenation of the chloro- and bromohydrins thus obtained with powdered potassium carbonate gave the corresponding diepoxy derivatives, and their hydrolysis led to mixtures of stereoisomeric tetrahydric alcohols.     

Direct, copper-catalyzed oxidation of aromatic C-H bonds with hydrogen peroxide under acid-free conditions

The direct oxidation of benzene into phenol using hydrogen peroxide has been achieved in the absence of any acid with Tp(x)Cu(NCMe) complexes as the catalysts. In the case of anthracenes as the substrates, valuable anthraquinones have been quantitatively obtained in the same manner.     

奎宁-杂多酸杂化催化剂催化H2O2为氧源的苯羟基化反应

将奎宁与Keggin结构磷钼钒杂多酸结合制备出一种新颖的多相苯羟基化杂化催化剂, 采用傅里叶变换红外光谱、紫外-可见光谱、X射线衍射、扫描电镜、热重、N₂吸附-脱附和CHN元素分析等表征手段对催化剂进行了分析. 结果表明, 该催化剂是一种具有较高比表面积和孔体积的半无定形有机杂多酸盐. 在H₂O₂为氧源的苯羟基化反应中, 杂化催化剂引导了液-固两相催化体系, 表现出较高催化活性和重复使用稳定性. 催化剂中奎宁与杂多阴离子间的氢键和电子相互作用赋予了其高熔点和难溶性, 而高比表面积和因奎宁而改善的杂多阴离子的氧化还原性是其获得优异催化性能的主要原因. 这为多相苯羟基化反应提供了一种新的且制备便捷的基于多金属氧酸盐的高效催化剂.     

Reactions of hydrogen atom with hydrogen peroxide

Rate coefficients are calculated using canonical variational transition state theory with multidimensional tunneling (CVT/SCT) for the reactions H + H2O2 --> H2O + OH (1a) and H + H2O2 --> HO2 + H2 (1b). Reaction barrier heights are determined using two theoretical approaches: (i) comparison of parametrized rate coefficient calculations employing CVT/SCT to experiment and (ii) high-level ab initio methods. The evaluated experimental data reveal considerable variations of the barrier height for the first reaction: although the zero-point-exclusive barrier for (1a) derived from the data by Klemm et al. (First Int. Chem. Kinet. Symposium 1975, 61) is 4.6 kcal/mol, other available measurements result in a higher barrier of 6.2 kcal/mol. The empirically derived zero-point-exclusive barrier for (1b) is 10.4 kcal/mol. The electronic structure of the system at transition state geometries in both reactions was found to have "multireference" character; therefore special care was taken when analyzing electronic structure calculations. Transition state geometries are optimized by multireference perturbation theory (MRMP2) with a variety of one-electron basis sets, and by a multireference coupled cluster (MR-AQCCSD) method. A variety of single-reference benchmark-level calculations have also been carried out; included among them are BMC-CCSD, G3SX(MP3), G3SX, G3, G2, MCG3, CBS-APNO, CBS-Q, CBS-QB3, and CCSD(T). Our data obtained at the MRMP2 level are the most complete; the barrier height for (1a) using MRMP2 at the infinite basis set limit is 4.8 kcal/mol. Results are also obtained with midlevel single-reference multicoefficient correlation methods, such as MC3BB, MC3MPW, MC-QCISD/3, and MC-QCISD-MPWB, and with a variety of hybrid density functional methods, which are compared with high-level theory. On the basis of the evaluated experimental values and the benchmark calculations, two possible recommended values are given for the rate coefficients.     

Recent advances in electrocatalytic oxygen reduction for on-site hydrogen peroxide synthesis in acidic media

Electrocatalytic oxygen reduction reaction (ORR) via two-electron pathway is a promising approach to decentralized and on-site hydrogen peroxide (H₂O₂) production beyond the traditional anthraquinone process.In recent years,electrochemical H₂O₂ production in acidic media has attracted increasing attention owing to its stronger oxidizing capacity,superior stability,and higher compatibility with various applications.Here,recent advances of H₂O...     

Chemiluminescence determination of hydrogen peroxide

An overview of literature on the procedures for the chemiluminescence determination of hydrogen peroxide is presented.