荧光素荣光猝灭法测定向量磺酸根

报道了荧光素为指示剂荧光猝灭法间接测定ＩＯ＾－３的方法。在０．０５ｍｏｌ／ＬＨ２ＳＯ４介质中，Ｉ＾－和ＩＯ＾－３反应生成Ｉ２，Ｉ２与荧光素反应，使荧光素荧光猝灭。该法灵敏度高，选择性好，操作简单，用于含碘食盐，低钠食盐中微量ＩＯ＾－３的测定，结果满意。     

荧光光度法测定大气中痕量二氧化硫

在弱酸性介质中,碘与荧光素反应导致荧光素荧光强烈猝灭,而ＳＯ＾２－３的存在可以有效地抑制这猝灭作用,使得体繁荣为光强度增强,籍此可测定痕量ＳＯ＾２－３,在线性范围为２５－１５０μｇ／Ｌ,检出限为８．７μｇ／Ｌ。该法快速,灵敏,选择性好,操作简便,用于大气中二氧化硫实际样品分析,结果令人满意。     

2‘,7’—二氯荧光素荧光法测定环境水样中的酚

报道了以２＇，７＇－二氯荧光素（ＤＣＦ）为指示剂，荧光法间接测定痕量酚的新方法。在０．５ｍｏｌ／Ｌ Ｈ２ＳＯ４介质中，Ｂｒ＾－和ＢｒＯ３＾－反应生成Ｂｒ２，Ｂｒ２与２＇，７＇－二氯荧光素反应，使２＇７＇－二氯荧光素荧光猝灭，当加入酚时，酚的溴代反应使体系荧光增强。ｐＨ４．０￣６．０范围内，该体系激发波长，发射波长分别为λｅｘ５０５ｎｍ，λｅｍ５２０ｎｍ。酚浓度在１．６￣５２ｎｇ／Ｌ范围内呈线性关系     

2′,7′-二氯荧光素荧光法测定环境水样中的酚

报道了以２′，７′－二氯荧光素（ＤＣＦ）为指示剂，荧光法间接测定痕量酚的新方法。在０．５ｍｏｌ／ＬＨ２ＳＯ４介质中，Ｂｒ－和ＢｒＯ－３反应生成Ｂｒ２，Ｂｒ２与２′，７′－二氯荧光素反应，使２′７′－二氯荧光素荧光猝灭，当加入酚时，酚的溴代反应使体系荧光增强。ｐＨ４．０～６．０范围内，该体系激发波长，发射波长分别为λｅｘ５０５ｎｍ，λｅｍ５２０ｎｍ。酚浓度在１．６～５２ｎｇ／Ｌ范围内呈线性关系，检出限为１．６ｎｇ／Ｌ。本法选择性好，用于环境水样中酚的测定，结果满意。     

异硫氰酸荧光素荧光猝灭法测定痕量碘酸根

碘酸根与碘离子反应生成游离碘使异硫氰酸荧光素的荧光猝灭,λｅｘ为４８７ｎｍ,λｅｍ为５１７ｎｍ,碘酸根含量在２－８μｇ／Ｌ范围内与荧光猝灭程度有良好线性关系,检测限为０．７４μｇ／Ｌ,该法灵敏度高,操作简便,用于含碘含盐中微量碘酸根的测定,结果满意。     

碘化物—罗丹明B体系荧光猝灭反应测定痕量亚硝酸根

拟定了一个荧光猝灭法测量痕量亚硝酸根的新方法。在盐酸介质中，亚硝酸根氧化碘化钾的反应，其反应物Ｉ＾－３使罗丹明Ｂ荧光猝灭，方法的检出限为３．６μｇ／Ｌ；测定范围为１０－１２０μｇ／Ｌ。方法简便快速，选择性好，用于自来水，矿泉水及合成样品中亚硝酸根的测定，结果满意。     

铁（Ⅲ）—过氧化氢—水杨基荧光酮—溴化十六烷基三甲铵荧光猝灭反应？…

在ｐＨ３．１～５．２的ＨＣｌ－ＮａＡｃ缓冲介质中,溶液中的铁（Ⅲ）与过氧化氢（Ｈ２Ｏ２）,水杨基荧光酮（ＳＡＦ）和溴化十六烷基三发（ＣＴＭＡＢ）反应产生一多元混合络合物,使水杨基荧光酮溶液的荧光明显猝灭,据此建立了测定痕量铁的荧光猝灭分析法,该体系的激发波长λｅｘ＝４３５．８ｎｍ,发射波长λｅｍ＝５４０ｎｍ。铁的浓度在２～１００ｕｇ／Ｌ范围内有良好的线性关系;方法的检出限为０．４１ｕｇ／Ｌ。该方法     

二溴羟基苯基荧光酮荧光猝灭法测定Br^—

本文报道了以二溴羟基苯基荧光酮（ＤＢＨ－ＰＦ）为指示剂，在阳离子表活性剂ＣＰＣ存在下荧光猝灭间接测定Ｂｒ＾－的新方法。在０．６ｍｏｌ／ＬＨ２ＳＯ４介质中，Ｂｒ＾－和ＢｒＯ３＾－反应生成Ｂｒ２，Ｂｒ２与ＤＢＨ－ＰＦ（λｅｍ＝５２０ｎｍ）生成红色化合物，使体荧光猝灭。Ｂｒ＾－含量在０．２５－６．２５μｇ／２５ｍＬ范围内有良好的线性关系，检测限为０．２５μｇ／２５ｍＬ。该法灵敏度高，选择性好，用于合成海     

碘化物-罗丹明B体系荧光猝灭反应测定痕量亚硝酸根

拟定了一个荧光猝灭法测定痕量亚硝酸根的新方法。在盐酸介质中，亚硝酸根氧化 碘化钾的反应，其反应产物Ｉ３－使罗丹明Ｂ荧光猝灭。方法的检出限为３．６μｇ／Ｌ；测定范围为 １０～１２０μｇ／Ｌ。方法简便快速、选择性好，用于自来水，矿泉水及合成样品中亚硝酸根的测定， 结果满意。     

碘化物-结晶紫-聚乙烯醇体系分光光度法测定自来水中痕量二氧化氯

在稀磷酸介质中，二氧化氯（ＣｌＯ２）氧化Ｉ离子形成 Ｉ３配阴离子，Ｉ３进一步与结晶紫（ＣＶ）阳离子形成离子缔合物［ＣＶ］［Ｉ３」。在聚乙烯醇存在下，该离子缔合物最大吸收波长λｍａｘ位于５５２ ｎｍ处，摩尔吸光系数ε＝２５ × １０５Ｌ·ｍｏｌ－１·ｃｍ－１，对 ＣｌＯ２的检出限为 ０．６ μｇ／Ｌ，线性范围是 ０．６～２８０μｇ／Ｌ。加入适量 ＫＦ溶液可消除自来水中Ｆｅ（Ⅲ）的干扰。方法对μｇ／Ｌ级ＣｌＯ２ 的测定有较好的选择性，可成功地用于自来水样品分析。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.