Synthesis of Fused Tricyclic Systems from Cycloalkadienones via Diels–Alder Reaction: Sharpless Oxidation of bis Adducts

The Diels–Alder reaction between 2,7‐cyclooctadienone and cyclopentadiene goes to completion to produce a bis adduct and mono adduct under InCl₃ conditions. 2,6‐Cycloheptadienone undergoes sequential Diels–Alder reactions in the presence of AlCl₃ with cyclohexadiene and cyclopentadiene to produce the bis adduct. The bis adducts were oxidatively cleaved to produce the [5.8.5] and [5.7.6] tricyclic systems.     

Design of an organocatalyst for the enantioselective Diels-Alder reaction with alpha-acyloxyacroleins

We have realized the first enantioselective organocatalytic Diels-Alder reaction between alpha-substituted acroleins, such as alpha-acyloxyacroleins, and not only cyclic but also acyclic dienes. alpha-Acyloxyacroleins are useful as synthetic equivalents of alpha-haloacroleins. The present catalyst could be prepared in situ from pentafluorobenzenesulfonic acid (2.5-3.0 equiv) and chiral triamine (1 equiv) derived from H-l-Phe-l-Leu-N(CH2CH2)2. The enantioselective Diels-Alder reaction of 5-(benzyloxymethyl)cyclopentadiene, cyclopentadiene, cyclohexadiene, 2,3-dimethylbutadiene, and isoprene with alpha-(p-methoxybenzoyloxy)acrolein catalyzed by the above chiral ammonium salt (2.5-20 mol %) at -20-22 degrees C gave the corresponding adducts with 83, 83, 91, 92, and 88% ee, respectively.     

Europium(III) Catalysis for Reduction of Thionine Dye by Selenous Acid in Aqueous Sulfuric Acid Solutions: A Kinetic and Mechanistic Approach

The catalytic effect of europium(III) on the reduction of thionine dye (Th) by selenous acid has been studied by spectrophotometry in aqueous sulfuric acid solutions at a constant ionic strength of 3.0 mol dm^?3 and at different temperatures (283–313 K). A first‐order dependence with respect to both [Th] and [Eu^III] was obtained, whereas the orders with respect to [Se^IV] and [H⁺] were less than unity. Variation of ionic strength and dielectric constant of the reaction media did not affect the reaction rates. Probable mechanistic schemes for thionine reductions in both the absence and presence of europium(III) catalyst were proposed. The rate laws associated with the reaction mechanisms were derived, and the reaction constants were calculated. The activation parameters of the rate constants of the slow steps of both uncatalyzed and catalyzed reactions along with thermodynamic quantities of the equilibrium constants are computed and discussed.     

Silver(I) and Copper(II) Catalysis for Oxidation of Histidine by Cerium(IV) in Acid Medium: A Comparative Kinetic Study

The catalytic effect of silver(I) and copper(II) ions on the oxidation of histidine by cerium(IV) in aqueous sulfuric acid solutions was studied spectrophotometrically at a constant ionic strength of 3.0 mol dm⁻³ and at 25°C. In both uncatalyzed and metal ions‐catalyzed paths, the reactions exhibited first‐order kinetics with respect to [Ce(IV)] and [catalyst], and fractional first‐order dependences with respect to [His] and [H⁺]. The oxidation rates increased as the ionic strength and dielectric constant of the reactions media increased. The catalytic efficiency of Ag(I) was higher than that of Cu(II). Plausible mechanistic schemes for both uncatalyzed and catalyzed reactions were proposed, and the rate laws associated with the suggested mechanisms were derived. In both cases, the final oxidation products of histidine were identified as 2‐imidazole acetaldehyde, ammonium ion, and carbon dioxide. The activation parameters associated with the second‐order rate constants were evaluated.     

Dramatic rate enhancement with preservation of stereospecificity in the first metal-catalyzed additions of allylboronates

This communication successfully challenges the perception that the additions of allylbonates to aldehydes cannot be catalyzed effectively by added Lewis acids. Using a novel class of isomerically pure, tetrasubstituted 2-alkoxycarbonyl allylboronates (1), we describe that some metals (for example, Sc(OTf)(3) and Cu(OTf)(2)) allow these reagents to add onto aldehydes to yield gamma-lactone products 2 in good yields at temperatures almost 100 degrees C lower than the corresponding uncatalyzed reactions. The large rate enhancement over the uncatalyzed reaction provides a highly improved practical approach to access aldol-like adducts with a stereogenic quaternary carbon center. The crucial role of the 2-alkoxycarbonyl group on allylboronates 1 was demonstrated with control experiments using a model allylboronate lacking such an ester group. Moreover, the stereospecificity observed in the uncatalyzed allylborations is preserved. These observations raise intriguing mechanistic issues such as the suggestion that type I allylmetal behavior is maintained in this unprecedented catalytic reaction manifold.     

2-Piperidino-1,1,2-triphenylethanol: a highly effective catalyst for the enantioselective arylation of aldehydes

Here we report the use of 2-piperidino-1,2,2-triphenylethanol (5) as an outstanding catalyst for the ligand-catalyzed arylation of aldehydes. The use of 5 and a 2/1 mixture of Et(2)Zn/Ph(2)Zn provided the corresponding chiral diarylcarbinols with enantiomeric excess of up to 99% ee. The effect of temperature on the reaction enantioselectivity was studied and the inversion temperature (T(inv)) was determined to be 10 degrees C for reaction with p-tolylaldehyde. Most remarkably, lowering the amount of catalyst (5) to 0.5 mol % still afforded excellent levels of enantiocontrol (93.7% ee). Kinetics of the catalyzed and uncatalyzed arylation of aldehydes was studied by means of in situ FT-IR. The background uncatalyzed addition rates to p-tolylaldehyde when using pure Ph(2)Zn and Et(2)Zn/Ph(2)Zn (2/1) suggest that in the latter case a mixed zinc species forms (EtPhZn) minimizing the undesired nonselective addition. Formation of EtPhZn was modeled at the DFT calculation level. A four-center TS (TS-V) corresponding to the Et/Ph scrambling was localized along with two dimers (D-IV and D-VI). The model supports the hypothesis that Et/Ph exchange is a kinetically facile process. Gas evolution experiments during the formation of the active catalyst showed that the formation of an active site with a ONZn-Et (10) moiety is kinetically favored over ONZn-Ph (11). Finally, the phenyl transfer to benzaldehyde was modeled at the PM3(tm) level through anti and syn 5/4/4 tricyclic TS structures for both 10 and 11. The model could correctly predict the sense and selectivity of the overall process and predicted that 11 should be more selective than 10.     

H原子与CH3NH2抽氢反应的动力学计算

用QC ISD(T)/6-311 G(3DF,3PD)/MP2/6-311G(D,P)方法研究了H原子与CH3NH2的抽氢反应过程。该反应包含两个反应通道:H分别从CH3基团(R1)和NH2(R2)基团上抽氢。R1势垒比R2势垒低3.42kJ/mol,表明R1是主反应通道。在从头算的基础上,用变分过渡态理论(CVT)加小曲率隧道效应(SCT)研究了各反应温度范围为200~4000K内的速率常数,所得结果与实验值符合的很好。动力计算表明,在所研究的温度范围内,变分效应对速率常数的计算影响不大,而在低温范围内,隧道效应起了很重要的作用。     

Isothermal cure kinetics of uncatalyzed and catalyzed diglycidyl ether of bisphenol-A/carboxylated polyester hybrid powder coating

The thermal cure behavior of diglycidyl ether bisphenol-A/carboxylated polyester hybrid powder coating system in the absence and presence of catalyst was monitored using differential scanning calorimetry. Curing temperatures were between 160 and 200?°C. The experimental results showed an autocatalytic behavior of the reaction, which could be described by the model proposed by Kamal. This model includes two rate constants k ₁ and k ₂ and two reaction orders m and n. The activation energies E _a1 and E _a2 of these rate constants were 51.7 and 42.3?kJ/mol for uncatalyzed cure reaction and 40.6 and 35.0?kJ/mol for externally catalyzed reaction. The average order of the overall reaction was found to be 2.45 and 2.72 for uncatalyzed and catalyzed system, respectively. Except for the late stage of cure reaction, the model agreed well with the experimental data, especially at high temperatures and in externally catalyzed cure reaction. A diffusion factor was introduced into the model to account for the effect of diffusion on the cure rate. The modified model greatly improved the predicated data at the late stage of cure reaction.     

Polyesterification reactions of adipic acid-based polyesters

A series of studies of uncatalyzed and catalyzed polyesterification experiments have been investigated using different glycols at different temperatures. The experimental results for uncatalyzed reactions agreed quite well with the kinetic equation as proposed by P. J. Flory. However, Flory proposed a second-order reaction for an externally added strong acid as a catalyst. In contrast to Flory's theory, a mixed mechanism, based on a combination of carboxylic acid groups from the raw material and an external organotin catalyst, was proposed for the catalyzed reaction. In this article, the reaction rate of catalyzed and uncatalyzed polyesterifications using different glycols was compared, and the effect of different temperatures and catalyst levels was also discussed. The reaction rate constant decreases in the following order for both catalyzed and uncatalyzed polyesterification: 1,6-HD > 1,4-BD > NPG > DEG > EG ? PG. © 1993 John Wiley & Sons, Inc.     

Reaction Mechanisms and Kinetics of the Melt Transesterification of Bisphenol‐A and Diphenyl Carbonate

The catalyzed and uncatalyzed reaction mechanisms of the melt transesterification process of bisphenol‐A and diphenyl carbonate are proposed based on nucleophilic substitution at the carbonyl group of the reactants. The reaction paths and energy barriers of the melt transesterification reaction were predicted and identified via density functional theory (DFT) calculations. The calculations reveal that the different oligomers with only one repeating unit are formed through different thermal processes. The theoretical evaluation further indicates that the basic hydroxide catalysts can reduce the energy barrier for the transesterification reaction, which allows subsequent nucleophilic attack to easily occur. Furthermore, the reaction kinetics of transesterification using tetraethyl ammonium hydroxide as a catalyst were investigated experimentally over a temperature range of 155–175°C. The reaction rate constants and equilibrium constants were determined based on the functional group model, and the equilibrium constants decreased with increasing reaction temperature. A detailed molecular species model with a specific repeating unit (n = 3) was developed and applied to predict the change in the reactants, oligomers, and phenol, and the experimental data and model calculation agree quite well. The standard curves of the oligomer were reversely derived, which provide intuitive insight into the concentration change of each oligomer. Both the DFT calculations and experimental results indicate that the C1 oligomer is first formed, and some of which are then converted to other types or higher molecular weight oligomers.     

Rates of Proton Abstraction from Conjugated Dienes in the Gas Phase

The rates of proton transfer from 2, 4-hexadiene, 1, 3-cycloheptadiene, cyclopentadiene and acetone to t-butoxide have been measured in the gas phase using pulsed-ion-cyclotron-resonance spectroscopy. The rate constants are (units of 10^?10 cm³ molecule^?1 s^?1): 2.7 ± 0.4, 3.8 ± 0.4, 6.1 ± 0.7 and 10.8 ± 1.5, respectively. These results are analyzed in terms of the properties of the encounter complex and reaction transition states. The reaction profile for t-butoxide + cyclopentadiene is modeled using RRKM theory and an estimate for the central barrier height is obtained.     

载体对环戊二烯在负载型钯催化剂上选择加氢的作用

制备了几种负载型的钯加氢催化剂, 考察了它们对环戊二烯加氢反应动力学行为的影响。环戊二烯对环戊烯的加氢有抑制作用, 抑制作用的主要原因是环戊二烯的配位能力远大于环戊烯, 催化剂的载体通过其配体效应可以影响两者配位能力之比(K_D/K_E)和反应速度常数之比(k_2/k_4), 从而改变催化剂的选择性和活性。     

Rapid three-step cleavage of RNA and DNA model systems promoted by a dinuclear Cu(II) complex in methanol. energetic origins of the catalytic efficacy

A dinuclear Cu(II) complex of 1,3-bis-N(1)-(1,5,9-triazacyclododecyl)propane with an associated methoxide (2-Cu(II)(2):(-OCH(3))) was prepared, and its kinetics of reaction with an RNA model (2-hydroxypropyl-p-nitrophenyl phosphate (1, HPNPP)) and two DNA models (methyl p-nitrophenyl phosphate (3) and iso-butyl p-chlorophenyl phosphate (4)) were studied in methanol solution at (s)(s)pH 7.2 +/- 0.2. X-ray diffraction structures of 2-Cu(II)(2):(-OH)(H(2)O)(CF(3)SO(3)-)(3):0.5CH(3)CH(2)OCH(2)CH(3) and 2-Cu(II)(2):(-OH)((C(6)H(5)CH(2)O)(2)PO(2)-)(CF(3)SO(3)-)2 show the mode of coordination of the bridging -OH and H(2)O between the two Cu(II) ions in the first complex and bridging -OH and phosphate groups in the second. The kinetic studies with 1 and 3 reveal some common preliminary steps prior to the chemical one of the catalyzed formation of p-nitrophenol. With 3, and also with the far less reactive substrate (4), two relatively fast events are cleanly observed via stopped-flow kinetics. The first of these is interpreted as a binding step which is linearly dependent on [catalyst] while the second is a unimolecular step independent of [catalyst] proposed to be a rearrangement that forms a doubly Cu(II)-coordinated phosphate. The catalysis of the cleavage of 1 and 3 is very strong, the first-order rate constants for formation of p-nitrophenol from the complex being approximately 0.7 s(-1) and 2.4 x 10(-3) s(-1), respectively. With substrate 3, 2-Cu(II)(2):(-OCH(3)) exhibits Michaelis-Mentin kinetics with a k(cat)/K(M) value of 30 M(-1) s(-1) which is 3.8 x 10(7)-fold greater than the methoxide promoted reaction of 3 (7.9 x 10(-7) M(-1) s(-1)). A free energy calculation indicates that the binding of 2-Cu(II)(2):(-OCH(3)) to the transition states for 1 and 3 cleavage stabilizes them by -21 and -24 kcal/mol, respectively, relative to that of the methoxide promoted reactions. The results are compared with a literature example where the cleavage of 1 in water is promoted by a dinuclear Zn(II) catalyst, and the energetic origins of the exalted catalysis of the 2-Cu(II)(2) and 2-Zn(II)(2) methanol systems are discussed.     

Structural Investigations into the retro-Diels-Alder Reaction. Experimental and Theoretical Studies

The manifestations of the retro-Diels Alder reaction in the ground-state structures of a range of cyclopentadiene and cyclohexadiene cycloadducts 9-15 have been investigated by a combination of techniques. These include low-temperature X-ray crystallography, density functional calculations (B3LYP/6-31G(d,p)) on both the ground states and transition states, and the measurement of (13)C-(13)C coupling constants. We have found that the carbon-carbon bonds (labeled bonds a and b), which break in the rDA, are longer in the cycloadducts 9-15 than in their corresponding saturated analogues 9s-15s, which cannot undergo the rDA reaction. The degree of carbon-carbon bond lengthening appears to be related to the reactivity of the cycloadduct, thus the more reactive benzoquinone cycloadducts 5b and 13 have longer carbon-carbon bonds. Those cycloadducts 14 and 15 which are predicted to undergo asynchronous reactions show differing degrees of carbon-carbon bond lengthening, reflecting the differing degrees of bond breaking at the calculated transition states for the rDA.     

Theoretical study on the mechanism of reaction between 3-hydroxy-3-methyl-2-butanone and malononitrile catalyzed by lithium ethoxide

The The mechanism of reaction between 3-hydroxy-3-methyl-2-butanone and malononitrile for the synthesis of 2-dicyanomethylene-4, 5, 5-trimethyl-2,5-dihydrofuran-3-carbonitrile catalyzed by lithium ethoxide was investigated by density functional theory (DFT). The geometries and the frequencies of reactants, intermediates, transition states and products were calculated at the B3LYP/6-31G(d) level. The vibration analysis and the IRC analysis verified the authenticity of transition states. The reaction processes were confirmed by the changes of charge density at the bond-forming critical point. The results indicated that lithium ethoxide is an effective catalyst in the synthesis of 2-dicyanomethylene-4, 5, 5-trimethyl-2, 5-dihydrofuran-3-carbonitrile from malononi-trile and 3-hydroxy-3-methyl-2-butanone. The activation energy of the reaction with lithium ethoxide was 115.86 kJ·mol⁻¹ less than the uncatalyzed reaction. The mechanism of the lithium ethoxide catalyzed reaction differed from the mechanism of the uncatalyzed reaction.     

Diels-Alder reaction of methyl coumalate with 1,3-dienes

Reaction of methyl coumalate (1b) with 1,3-butadienes at 100° afforded the tetrahydrocoumarins (6) and the 4-methoxycarbonyltricyclo[3.2.1.0^2,7]octenes (7). The similar reaction of 1b with cyclohexadiene gave exclusively tetrahydronaphthalene-2-carboxylate. With cyclopentadiene, 1b afforded a product (10) resulting from the addition reaction in which cyclopentadiene acted as a dienophile. The reaction giving 6 is the first example of the reaction of a 2-pyrone as a dienophile.     

Proton spin coupling constants in cycloalkenes

The proton-proton coupling constants in cyclopentadiene, cyclohexadiene, cycloheptatriene, cyclooctatetraene, cyclopentene and cyclohexene have been calculated using the finite perturbation INDO method. The carbon geometry was taken from the corresponding electron diffraction studies. The theory gives satisfactory agreement with experiment. In terms of the many factor structural model, distance and angle distortions have been studied in ethylene, cis-1,3-butadiene and cis-2-butene. It has been established that these distortions produce noticeable changes only for those protons whose co-ordinates are changed. The coupling constants across three, four and five bonds are discussed separately in connection with the structural factors and the σ–π contribution. Finally, variations in the proton co-ordinates in cyclopentadiene are used to optimize the proton couplings.     

DFT study of the mechanism of Cu(I)-catalyzed and uncatalyzed intramolecular cyclopropanation of iodonium ylides

The mechanism of the Cu(I)-catalyzed and uncatalyzed intramolecular cyclopropanation of ketoesteric and diesteric iodonium ylides has been thoroughly explored by means of electronic structure calculation methods (DFT). All crucial reaction steps encapsulated in the entire catalyzed and uncatalyzed reaction pathways were scrutinized, while the elementary steps, the intermediates and transition states were identified through monitoring the geometric and energetic reaction profiles. It was found that CuCl efficiently catalyze the cyclopropanation of iodonium ylides only for their diesteric derivatives and their diazo analogues via stabilization of the respective carbene upon complexation with the metal center. For the ketoesteric iodonium ylides the CuCl catalyst does not affect the kinetics of the intramolecular cyclopropanation reactions which could proceed easily without the catalyst, in line with available experimental observations.     

Eleuthesides and their analogs: III. Reaction of Red-Al with γ,δ-epoxy nitriles

Oxiranyl-substituted cycloalkenecarbonitriles obtained by the Beckmann fragmentation of oximes derived from levoglucosenone adducts with 1,3-butadiene, isoprene, cyclohexadiene, and cyclopentadiene were subjected to Red-Al reduction with opening of the epoxide ring. The reactions with 1,3-butadiene, isoprene, and cyclohexadiene derivatives were accompanied by cyclopropane ring closure and reduction of the cyano group to aldehyde, whereas the cyclopentadiene derivative underwent hydrogenolysis of the oxirane fragment.     

Oxidation of sulfoxides by hydrogen peroxide,catalyzed by methyltrioxorhenium(VII)

Dialkyl and diaryl sulfoxides are oxidized to sulfones by hydrogen peroxide using methyltrioxorhenium as the catalyst. The reaction rate is negligible without a catalyst. The kinetics study was performed in CH3CN-H2O (4:1 v/v) at 298 K with [H+] at 0.1 M, conditions which make the equilibration between MTO and its peroxo complexes more rapid than the oxygen-transfer step. The values for the rate constant for the oxygen-transfer step lie in the range 0.1-3 L mol-1 s-1. The rate constants were significantly smaller than for the oxidation of sulfides to sulfoxides. A study of ring-substituted diaryl sulfoxides yielded kinetics results that are consistent with nucleophilic attack of the sulfur atom on the peroxide oxygen group since rho = -0.65. The results cited refer to the reactions of the diperoxo from the catalyst, MeRe(O)(eta 2-O2)2H2O. The monoperoxo complex showed no measurable reactivity toward sulfoxides, in contrast with the situation for nearly every other substrate. That unusual finding suggests a hydrogen-bonded interaction between the substrate and the diperoxorhenium compound which cannot exist with the monoperoxo compound.