Large size, high efficiency fiber-shaped dye-sensitized solar cells

A high-efficiency dye-sensitized solar cell prototype has been designed and fabricated, in which the working electrode and counter electrode are in direct contact and singly twisted. The cell is sealed in a capillary. In this solar cell configuration, the area ratio between the counter and working electrode is extremely low which allows the independent adjustment of electrolyte volume and the distance between counter electrode and photo-anode. Also it is more easily sealed compared to planar solar cell. The effects of TiO(2) film thickness, twisted pitch of counter electrode and length of device have been investigated. Our results indicate that this novel configuration has demonstrated excellent modularization function, three dimensional light harvesting capacities and the relative independence of incident light angles due to the symmetry structure. The power conversion efficiency of one cell of 9.5 cm in length can reach up to 5.41% at standard test condition (100 mW cm(-2)) and the power output may double under intense diffuse illumination. As far as we know, this is the longest and most efficient fiber-shaped dye-sensitized solar cell consisting of liquid electrolyte. The longer the fiber-shaped solar cell is, the more suitable it is for woven solar power textile if it is encapsulated in transparent flexible plastic capillary.     

静电喷雾法制备高效染料敏化太阳能电池的二氧化钛光阳极

TiO2光阳极膜是染料敏化太阳能电池（DSSC）的核心部件之一,它对电池的光电转换效率起决定性作用．TiO2电极一般采用刮涂法和丝网印刷法制备．近3年,通过静电喷雾制备光阳极的方法得到国内外学者的关注．静电喷雾制备光阳极会受到多种因素的影响,如电压、流速、悬浮液浓度、喷雾距离以及喷雾时间等．但这些因素对成膜和DSSC器件性能的影响却没有得到全面的研究或者报道．本文使用静电喷雾法制备了多孔TiO2纳米膜,并研究了以其为电极的电池器件特性．经过超声充分分散的稳定TiO2乙醇悬浮液在高电压下喷雾到导电玻璃上成膜．通过改变电喷雾距离,得到了具有不同形貌的TiO：光阳极膜,并解释了其形成的机理及其对电池性能的影响．研究还表明,光阳极膜的TiC14处理能够很好地改善电池性能．通过优化,基于流速为0．8mL／h、电喷雾距离和时间分别为2．2cm和8min条件下制备的光阳极,结合TiC14处理,组装的电池在模拟太阳光源AM1．5G下光电转化效率达6．24％．     

High efficiency of dye-sensitized solar cells based on metal-free indoline dyes

We now report metal-free organic dyes having a new type of indoline structure, which exhibits high efficiencies in dye-sensitized solar cells. The solar energy to current conversion efficiencies with the new indoline dye was 6.51%. Under the same conditions, the N3 dye was 7.89% and the N719 dye was 8.26%. The new indoline dye was optimized for the amount of 4-tert-butyl pyridine in the electrolyte and cholic acid as a coadsorbent. Subsequently, the solar energy to current conversion efficiencies reached 8.00%. This value was the highest obtained efficiency for dye-sensitized solar cells based on metal-free organic dyes without an antireflection layer.     

TiCl4 assisted formation of nano-TiO2 secondary structure in photoactive electrodes for high efficiency dye-sensitized solar cells

A new kind of photoactive electrodes with nanocrystalline TiO2(nano-TiO2)secondary structure is successfully prepared via a simple method of adding a small amount of TiCl4 2-propanol solution in conventional nano-TiO2 paste to form micro-sized nano-TiO2 aggregates.The benefits of this special structure include improved optical absorption,increased light scattering ability,and enhanced electron transport and collection efficiency.Dye-sensitized solar cells(DSCs)based on these photoactive electrodes show improved performance.The power conversion efficiency of the cells can be increased from 5.03%to 7.30%by substituting 6μm conventional nano-TiO2 thin film with the same thickness of as-prepared nano-TiO2 aggregates film in the photoactive electrodes.A higher power conversion efficiency of the cells can be obtained by further increasing the thickness of the nano-TiO2 aggregates film.     

基于二级结构TiO_2纳米晶光阳极的高效染料敏化太阳能电池

本文报道了一种新型的二级结构TiO2纳米晶(nano-TiO2)光阳极的简单制备方法及其在高效染料敏化太阳能电池中的应用.通过添加适量TiCl4异丙醇溶液到传统nano-TiO2浆料中,可生成微米级nano-TiO2聚集体.该二级结构能有效提高光阳极光谱吸收和散射性能及电子传输和收集效率.基于这种结构光阳极的染料敏化太阳能电池光电性能有显著提高.在光阳极中将6μm厚传统nano-TiO2膜用相同厚度nano-TiO2聚集体替换,电池光电转换效率由5.03%提高到7.30%.进一步增加nano-TiO2聚集体的厚度能制备出更高光电转换效率的电池.     

A long-term stable Pt counter electrode modified by POM-based multilayer film for high conversion efficiency dye-sensitized solar cells

A long-term stable Pt counter electrode modified by POM-based multilayer film has been fabricated by the electrochemical deposition method, which can markedly increase short-circuit photocurrent, open-circuit voltage and the conversion efficiency when used in dye-sensitized solar cells (DSSCs).     

A high molar extinction coefficient sensitizer for stable dye-sensitized solar cells

An amphiphilic heteroleptic polypyridyl ruthenium complex with a high molar extinction coefficient was synthesized and demonstrated as an efficient, thermostable sensitizer in nanocrystalline dye-sensitized solar cells.     

Synthesis of nano-TiO2 assisted by diethylene glycol for use in high efficiency dye-sensitized solar cells

The performance of dye-sensitized solar cells(DSSCs) consisting of anatase TiO_2 nanoparticles that were synthesized via a hydrothermal method was studied.The synthesized TiO_2 nanoparticles were characterized by X-ray diffraction(XRD),nitrogen sorption analysis,scanning electron microscopy(SEM),high resolution transmission electron microscopy(HRTEM),and UV-vis spectroscopy.Then the J-Vcurve,electrochemical impedance spectroscopy(EIS),and open-circuit voltage decay(OCVD) measurement were applied to evaluate the photovoltaic performance of DSSCs.Compared with the commercial TiO_2nanoparticles(P25),the synthesized-TiO_2 nanoparticles showed better performance.By adding diethylene glycol(DEG) before the hydrothermal process,the synthesized TiO_2 nanoparticles(hereafter referred to as TiO_2-DEG particles) shows narrower size distribution,larger specific surface area,higher crystallinity,and less surface defects than TiO_2(DEG free) particles.The analysis of photovoltaic properties of DSSCs based on TiO_2-DEG particles showed that the recombination of electron-hole pairs was decreased and the trapping of carries in grain boundaries restrained.It was believed that the photoelectrode fabricated with the as-prepared TiO_2 nanoparticles improved the loading amount of dye sensitizers(N719).and enhanced the photocurrent of the DSSCs.As a result,the TiO_2-DEG particle based cells achieved a photo-to-electricity conversion efficiency(η) of 7.90%,which is higher than 7.53%for the cell based on TiO2(DEG free) and 6.59%for the one fabricated with P25.     

High efficiency dye-sensitized nanocrystalline solar cells based on ionic liquid polymer gel electrolyte

An ionic liquid polymer gel containing 1-methyl-3-propylimidazolium iodide (MPII) and poly(vinylidenefluoride-co-hexafluoropropylene) (PVDF-HFP) has been employed as quasi-solid-state electrolyte in dye-sensitized nanocrystalline TiO2 solar cells with an overall conversion efficiency of 5.3% at AM 1.5 illumination.     

Nb doping of TiO2 nanotubes for an enhanced efficiency of dye-sensitized solar cells

Nb-doped TiO(2) nanotube (with C(Nb) < 1 wt%) layers were successfully fabricated by self-ordered electrochemical anodization of Ti-Nb alloys. When used in dye-sensitized solar cells the efficiency enhanced by up to 30% compared to non-doped TiO(2) nanotubes. IMVS measurements indicate the beneficial effect to be due to lower recombination losses.     

Butyronitrile-based electrolyte for dye-sensitized solar cells

We elaborated a new electrolyte composition, based on butyronitrile solvent, that exhibits low volatility for use in dye-sensitized solar cells. The strong point of this new class of electrolyte is that it combines high efficiency and excellent stability properties, while having all the physical characteristics needed to pass the IEC 61646 stability test protocol. In this work, we also reveal a successful approach to control, in a sub-Nernstian way, the energetics of the distribution of the trap states without harming cell stability by means of incorporating NaI in the electrolyte, which shows good compatibility with butyronitrile. These excellent features, in conjunction with the recently developed thiophene-based C106 sensitizer, have enabled us to achieve a champion cell exhibiting 10.0% and even 10.2% power conversion efficiency (PCE) under 100 and 51.2 mW·cm(-2) incident solar radiation intensity, respectively. We reached >95% retention of PCE while displaying as high as 9.1% PCE after 1000 h of 100 mW·cm(-2) light-soaking exposure at 60 °C.     

New architectures for dye-sensitized solar cells

Modern dye-sensitized solar cell (DSSC) technology was built upon nanoparticle wide bandgap semiconductor photoanodes. While versatile and robust, the sintered nanoparticle architecture exhibits exceedingly slow electron transport that ultimately restricts the diversity of feasible redox mediators. The small collection of suitable mediators limits both our understanding of an intriguing heterogeneous system and the performance of these promising devices. Recently, a number of pseudo-1D photoanodes that exhibit accelerated charge transport and greater materials flexibility were fabricated. The potential of these alternative photoanode architectures for advancing, both directly and indirectly, the performance of DSSCs is explored.     

All-carbon electrode-based fiber-shaped dye-sensitized solar cells

A novel fiber-shaped dye-sensitized solar cell (DSSC) based on an all-carbon electrode is presented, where low-cost, highly-stable, and biocompatible carbon materials are applied to both the photoanode and the counter electrode. The fibrous carbon-based photoanode has a core-shell structure, with carbon fiber core used as conductive substrate to collect carriers and sensitized porous TiO(2) film as shell to harvest light effectively. The highly catalytic all-carbon counter electrode is made from ink carbon coatings and carbon fiber substrate. Results show that the open circuit voltage can be largely improved through engineering at the carbon fiber/TiO(2) interface. An optimized diameter of the photoanode results in an efficiency of 1.9%. It is the first demonstration of efficient DSSCs based on all-carbon electrodes, and the devices are totally free from TCOs or any other expensive electrode materials. Also, this type of solar cell is significant in obtaining bio-friendly all-carbon photovoltaics suitable for large-scale production.     

Liquid electrolytes for dye-sensitized solar cells

The present review offers a survey of liquid electrolytes used in dye-sensitized solar cells from the beginning of photoelectrochemical cell research. It handles both the solvents employed, and the prerequisites identified for an ideal liquid solvent, as well as the various effects of electrolyte solutes in terms of redox systems and additives. The conclusions of the present review call for more detailed molecular insight into the electrolyte-electrode interface reactions and structures.