镍基催化剂上硫醇与异戊二烯硫醚化反应的研究

在上流式气-液-固三相固定床微型反应装置上，对Ni／Al2O3催化剂上硫醇与异戊二烯硫醚化反应进行了研究，并考察了反应温度、压力、空速、临氢条件对催化剂二烯硫醚化反应性能的影响。结果表明，异戊二烯与硫醇在镍基催化剂的作用下，可以发生反应生成高沸点的硫醚化合物，反应温度和空速对催化剂二烯硫醚化活性有明显的影响，提高反应温度和降低空速有利于提高硫醇在二烯硫醚化反应过程中的转化率，在临氢反应条下，可以提高催化剂二烯硫醚化反应的活性和稳定性。     

硫醇化合物在银盐CTP版材上的疏水作用

本文采用线形CCD(ChargeCoupledDevice)技术、接触角等方法研究了一种长链硫醇化合物对计算机直接制版材料物理显影动力学及疏水性能的影响。结果表明,该化合物是物理显影过程的抑制剂,在显定合一的加工液中添加该化合物可以显著提高版材物理显影银区的疏水性能。同时,通过表面显微拉曼光谱进一步证明了硫醇化合物在物理显影银表面的吸附增加了版材的亲油性。     

FeCl3催化硫醇与亚胺离子的亲核反应

以γ-羟基内酰胺和硫醇为原料,1,2-二氯乙烷为溶剂,在三氯化铁促催化下生成亚胺离子,而后硫醇发生亲核反应构建3-硫醚基异吲哚啉酮类化合物.该反应70℃条件下搅拌6 h即可完成,产率87～94％,该反应底物适用范围广,对于不同的γ-羟基内酰胺类化合物以及不同的伯硫醇和仲硫醇,反应均可以顺利得到相应的产物.     

水滑石焙烧产物负载磺化酞菁钴双功能硫醇氧化催化剂的研究

以水滑石焙烧而成的Ｍｇ－Ａｌ复合氧化物（Ｍｇ（Ａｌ）Ｏ）固体碱负载酞菁钴（ＣｏＰｃＴＳ）双功能催化剂催化１－辛硫醇氧化反应，具有与含１０％ＮａＯＨ的传统催化体系相催化性能，能有效地将１－辛硫醇氧化与二硫化合物，催化剂在循环使用时，活性下降可能与ＣｏＰｃＴＳ氧化中心聚集有关。     

顶空固相微萃取气相色谱-火焰光度法测定废水中烷基硫醇化合物

建立了顶空固相微萃取(HS-SPME)-气相色谱法测定人工湿地废水中烷基硫醇化合物的分析方法.详细研究了萃取参数如萃取涂层、萃取时间、萃取温度、样品体积、盐效应及样品pH值等对HS-SPME萃取乙硫醇(EtSH)、2-甲基-2-丙硫醇(Me-PrSH)、1-丙硫醇(1-PrSH)、2-丙硫醇(2-PrSH)、1-丁硫醇(1-BuSH)及环戊硫醇(CycloPeSH)(内标)的影响.富集的硫醇化合物经DB-VRX毛细管色谱柱分离,FPD检测.在优化的实验条件下,测定乙硫醇、2-甲基-2-丙硫醇、1-丙硫醇、2-丙硫醇、1-丁硫醇的线性范围介于0.12～16.21 μg/L之间; 检出限(3σ)介于0.97～22.11 ng/L之间.以环戊硫醇为内标物质,将本法用于废水中硫醇化合物的测定,获得满意结果.     

汽油中正戊硫醇的催化空气氧氧化脱除Ⅰ．CuZnAl复合氧化物催化剂的催化活性

以CuZnAl复合氧化物为催化剂,以空气为氧化剂,在固定床反应器中进行了模拟汽油中正戊硫醇的催化空气氧氧化脱除反应.考察了空速、氧气/硫比和反应温度等因素对脱除正戊硫醇效果的影响.结果表明,正戊硫醇的脱除可以在重时空速为50~70h-1,反应温度为150和300℃下高效地进行,在100h内正戊硫醇的转化率维持在90%以上.正戊硫醇氧化在150℃下发生二聚生成二聚物;在300℃下反应初期以深度氧化生成SO2为主,但随着反应时间的延长深度氧化反应逐渐减弱而二聚反应逐渐增强.     

磷杂Fries重排反应用于合成2-芘基膦化合物

芘具有良好的刚性平面和高的荧光量子产率,是有机光电材料研究中重要的结构单元,由于其电子结构特点,芘的2位官能团化非常困难.利用易得的1-芘醇和H-亚磷酸酯或有机磷氯化合物合成了一系列1-芘基磷酸酯化合物,经磷杂Fries重排反应在温和条件下实现了芘2位的磷酰化,并得到相应的2-磷酰基芘衍生物.该类化合物还为新型含磷共轭化合物芘并1,3-氧杂磷杂环戊二烯的研究奠定了基础.本研究不但为芘类化合物的官能团化提供了一个新方法,而且为新型含磷共轭化合物的设计与合成开辟了新路线,并对合成的新型芘类化合物的紫外吸收和荧光发射等性质进行了初步测定.     

一种基于二芘基苯的高效有机固态蓝色荧光化合物

利用Suzuki偶联反应,合成了一种新的二芘基苯的衍生物2,5-二甲基-1,4-双(7-特丁基-1-)芘基苯,并研究了其吸收和发光性质随着溶剂和温度等条件的变化情况.实验表明,与不含特丁基的类似化合物相比,引入特丁基可以明显减弱分子间作用并避免激基缔合物的形成,因而在保持吸收和发射光谱的谱形及峰位基本不变的同时显著地增强了荧光发光效率.该化合物的固态荧光量子效率高达0.82.     

中和法测定硫醇的改进

硫醇的测定一般采用碘量法,基于硫醇被碘氧化生成二硫醚。该法操作简便,但反应速度慢,并受烯烃、胺、酚等物质的干扰。也有人采用汞量法(或银量法),基于硫醇与可溶性汞盐(或银盐)形成硫醇盐的反应: RSH+HgCl_2=RSHgCl+HCl此法可按电流滴定、电位滴定或库伦滴定等方式进行,烯烃、胺、酚等物质无干扰,但仪器设备较复杂。也可利用上述反应中释放出来的等当量盐酸,以甲基橙或甲基红作指示剂,用标准碱溶液进行滴定。但结果往往偏低,其原因是终点时pH值太小,这是为了防止因二氯化汞水解而引起的干扰作用。本文提出如下方法:在滴定前加入足够量的碘化钾,与剩余的二氯化汞作用生成稳定的碘汞络离子,从     

磷杂Fries重排反应用于合成2-芘基膦化合物（英文）

芘具有良好的刚性平面和高的荧光量子产率,是有机光电材料研究中重要的结构单元,由于其电子结构特点,芘的2位官能团化非常困难.利用易得的1-芘醇和H-亚磷酸酯或有机磷氯化合物合成了一系列1-芘基磷酸酯化合物,经磷杂Fries重排反应在温和条件下实现了芘2位的磷酰化,并得到相应的2-磷酰基芘衍生物.该类化合物还为新型含磷共轭化合物芘并1,3-氧杂磷杂环戊二烯的研究奠定了基础.本研究不但为芘类化合物的官能团化提供了一个新方法,而且为新型含磷共轭化合物的设计与合成开辟了新路线,并对合成的新型芘类化合物的紫外吸收和荧光发射等性质进行了初步测定.     

Synthesis and spectral investigations of a new dyad with spiropyran and fluorescein units: toward information processing at the single molecular level

A new dyad 1 with two spiropyran units as the photochromic acceptors and one fluorescein unit as the fluorescent donor was synthesized and characterized. External inputs (ultraviolet light, visible light, and proton) induce the reversible changes of the structure and, concomitantly, the absorption spectrum of dyad 1 due to the presence of two spiropyran units. Only the absorption spectrum of the ME form of the spiropyran units in dyad 1 has large spectral overlap with the fluorescence spectrum of the fluorescein unit. Thus, the fluorescence intensity of dyad 1 is modulated by reversible conversion among the three states of the photochromic spiropyran units and the fluorescence resonance energy transfer (FRET) between the ME form and the fluorescein unit. Based on the fact that dyad 1 could "read out" three external input signals (ultraviolet light, visible ligh,t and proton) and "write" a compatible specific output signal (fluorescence intensity), dyad 1 described here can be considered to perform an integrated circuit function with one OR and one AND interconnected logic gates. The present results demonstrate an efficient strategy for elaborating and transmitting information at the single molecular level.     

Photoinduced electron transfer in self-assembled monolayers of porphyrin-fullerene dyads on ITO

Two porphyrin-fullerene dyads were synthesized to form self-assembled monolayers (SAMs) on indium-tin oxide (ITO) electrode, with either ITO-porphyrin-fullerene or ITO-fullerene-porphyrin orientations. The dyads contain two linkers for connecting the porphyrin and fullerene moieties and enforcing them essentially to similar geometries of the donor-acceptor pair, and two linkers to ensure the attachment of the dyads to the ITO surface with two desired opposite orientations. The transient photovoltage responses (Maxwell displacement charge) were measured for the dyad films covered by insulating LB films, thus ensuring that the dyads interact only with the ITO electrode. The direction of the electron transfer was from the photoexcited dyad to ITO independent of the dyad orientation. The response amplitude for the ITO-fullerene-porphyrin structure, where the primary intramolecular electron-transfer direction coincides with the direction of the final electron transfer from the dyad to ITO, was 25 times stronger than that for the opposite ITO-porphyrin-fullerene orientation of the dyad. Static photocurrent measurements in a liquid electrochemical cell, however, show only a minor orientation effect, indicating that the photocurrent generation is controlled by the processes at the SAM-liquid interface.     

A new chemiluminescence probe for singlet oxygen based on tetrathiafulvalene-anthracene dyad capable of performing detection in water/alcohol solution

A new tetrathiafulvalene-anthracene dyad 1 with two “tetraethylene glycol” units was synthesized and characterized. Strong chemiluminescence was observed upon reaction of dyad 1 with singlet oxygen (¹O₂), and this reaction shows fairly good selectivity toward ¹O₂ over other reactive oxygen species. Due to the introduction of two hydrophilic “tetraethylene glycol” units, the detection of ¹O₂ with dyad 1 can be performed in alcohol/water solution, which is relatively a mild medium when compared with water/tetrahydrofuran solution required by other tetrathiafulvalene-anthracene dyads. Dyad 1 may have a wider use for detection of ¹O₂ in biological systems.     

Singlet-energy transfer in quadruple hydrogen-bonded oligo(p-phenylenevinylene)perylene-diimide dyads

The photophysical properties of a supramolecular donor-acceptor dyad consisting of an oligo(p-phenylenevinylene) unit and a perylene-diimide unit are described. The dyad is created by functionalising the two chromophores with quadruple hydrogen bonding 2-ureido-4[1H]-pyrimidinone units, which provide a high association constant (K approximately 10(8) M-1 in toluene). This feature enabled us to study the time-resolved photoinduced singlet-energy transfer reaction between the two chromophores in dilute solution with transient pump-probe spectroscopy. This energy transfer occurs with a time constant of 5.1 ps.     

Photoresponsive J-aggregation behavior of a novel azobenzene-phthalocyanine dyad and its third-order optical nonlinearity

The photoresponsive J-aggregation behaviors of a novel azobenzene-substituted zinc phthalocyanine (azo-ZnPc dyad) were studied by UV/vis, fluorescence, and (1)H NMR spectroscopy. Upon illumination with 365 nm UV light, the trans-cis isomerization of azobenzene can efficiently reduce the steric hindrance around the peripheral oxygen atom of azo-ZnPc, shortening the possible distance between two phthalocyanine molecules and, consequently, greatly improving the tendency of J-aggregation of azo-ZnPc dyad. The third-order optical nonlinearities of the photoresponsive J-aggregates (before and after illumination) were measured by a Z-scan technique at 532 nm with a pulse duration of 25 ps. The Z-scan spectra revealed that all the samples possessed large positive nonlinear refraction and positive nonlinear absorption, exhibiting a self-focusing effect and reverse saturable absorption, respectively. The second molecular hyperpolarizabilities of the dyad in two conditions were measured to be 3.87 x 10(-30) and 4.82 x 10(-30) esu, respectively. All the results suggest that the azo-ZnPc dyad has potential in the field of nonlinear optics applications.     

Assembly of a tetrathiafulvalene-anthracene dyad on the surfaces of gold nanoparticles: tuning the excited-state properties of the anthracene unit in the dyad

Due to the unique features of the tetrathiafulvalene (TTF) unit, such as the electron-donating ability and presence of methylthio groups, dyad 1 can be assembled on the surfaces of gold nanoparticles, as indicated by absorption, electrochemical, and fluorescent-spectral studies. Dyad 1 can also be disassembled by the addition of thiols. Assembly of dyad 1 on the surfaces of gold nanoparticles leads to the formation of a triad (A1-D-A2), which in turn modulates the photoinduced electron-transfer process within dyad 1. Accordingly, the fluorescence intensity of dyad 1, after assembly with gold nanoparticles, increases, and the fluorescence lifetime is prolonged. Furthermore, the assembly of dyad 1 on gold nanoparticles facilitates photodimerization of the anthracene units of dyad 1. Both fluorescence and photodimerization are associated with the excited-state behavior of the anthracene unit, thus it may be concluded that the excited-state properties of the anthracene unit can be tuned upon complexation with gold nanoparticles.     

Solid film versus solution-phase charge-recombination dynamics of exTTF-bridge-C60 dyads

The charge-recombination dynamics of two exTTF-C60 dyads (exTTF = 9,10-bis(1,3-dithiol-2-ylidene)-9,10-dihydroanthracene), observed after photoinduced charge separation, are compared in solution and in the solid state. The dyads differ only in the degree of conjugation of the bridge between the donor (exTTF) and the acceptor (C60) moieties. In solution, photoexcitation of the nonconjugated dyad C60-BN-exTTF (1) (BN = 1,1'-binaphthyl) shows slower charge-recombination dynamics compared with the conjugated dyad C60-TVB-exTTF (2) (TVB = bisthienylvinylenebenzene) (lifetimes of 24 and 0.6 micros, respectively), consistent with the expected stronger electronic coupling in the conjugated dyad. However, in solid films, the dynamics are remarkably different, with dyad 2 showing slower recombination dynamics than 1. For dyad 1, recombination dynamics for the solid films are observed to be tenfold faster than in solution, with this acceleration attributed to enhanced electronic coupling between the geminate radical pair in the solid film. In contrast, for dyad 2, the recombination dynamics in the solid film exhibit a lifetime of 7 micros, tenfold slower than that observed for this dyad in solution. These slow recombination dynamics are assigned to the dissociation of the initially formed geminate radical pair to free carriers. Subsequent trapping of the free carriers at film defects results in the observed slow recombination dynamics. It is thus apparent that consideration of solution-phase recombination data is of only limited value in predicting the solid-film behaviour. These results are discussed with reference to the development of organic solar cells based upon molecular donor-acceptor structures.     

偶氮噻吩-富勒烯星状化合物的合成与性能研究

利用2—[4—(N—乙基—N—6—羟己基)氨基苯偶氮基]—3—氰基—5—甲酰基噻吩(1)和N—甲基甘氨酸产生的亚胺叶立德与富勒烯反应,合成了含富勒烯的偶氮噻吩化合物(2),2再与1,3,5-苯三甲酰氯进行取代反应生成了一类以苯为核心、偶氮噻吩为连接桥、三个富勒烯(C50)为电子受体端基的星状化合物3。制备了单层太阳能电池器件(ITO／化合物3／Al),其单色光光电转换效率(IPCE)约为2．5％。     

Photochemical Properties of Supramolecular Dyad with Pyrenylethenylquinoline as a Photochrome

Spectral and photochemical properties of a bichromophoric dyad with two photochromes, 2-[(2-(pyren-1-yl)ethenyl]quinoline (PEQ) bridged by ten methylene groups have been investigated. Stationary spectroscopy does not show substantial interaction between the PEQ groups in the dyad, but the appearance of another, more long-living component in the f luorescence decay kinetics indicates possible excimer formation. The formation of the chemically active excimer is also confirmed by the intramolecular [2+2] photocycloaddition reaction to give tetrasubstituted cyclobutane with two vicinal pyrene substituents. This reaction competes with trans–cis photoisomerization of the dyad. It has been proposed that the π-stacking interaction of two PEQ groups with a long system of π-bonds plays an important role in the excimer formation followed by the photocycloaddition reaction.     

Raman investigation of the CO2 complex formation in CO2-acetone mixtures

Polarized and depolarized Raman spectra of CO2-acetone mixtures have been measured along the isotherm 313 K as a function of CO2 concentration (0.1-0.9 molar fractions in CO2) by varying the pressure from 0.2 up to 8 MPa. Upon CO2 addition, a new band appears at about 655 cm(-1) and is assigned to the lower frequency nu 2(1) component of the bending mode after degeneracy removal due to the formation of a 1:1 electron donor acceptor (EDA) CO2 complex. The equilibrium constant associated with the complex formation was estimated and found close to those of contact charge transfer complexes. The main modifications of the Fermi dyad of CO2 in the mixtures compared with that of pure CO2 at equivalent density have been assessed. The band-shape analysis revealed that each dyad component is described by two Lorentzian profiles, showing that a tagged CO2 molecule probes two kinds of environment in its first shell of neighbors. The first one involves nonspecific interactions of CO2 with surrounding acetone whereas the second is assigned to the signature of 'transient' CO2 complexes formed with acetone. An upper bound life time of the complex has been estimated to be 8 ps. In addition, a broad band has been detected between the Fermi dyad peaks at about 1320 cm(-1) and its origin interpreted as a further evidence of the CO2-acetone heterodimer formation. Finally, the values of the equilibrium concentration of the heterodimer versus the total concentration of CO2 deduced from the analysis of the nu 2(1) band and from the Fermi dyad have been compared, and the difference is interpreted as due to a lack of theoretical approach of Fermi resonance transitions associated with species existing in different environments.