Room‐Temperature Synthesis of High Surface Area Anatase TiO2 Exhibiting a Complete Lithium Insertion Solid Solution

The synthesis of highly divided anatase TiO₂ nanoparticles displaying 300 m² g^?1 surface area is achieved by following a two‐step synthetic process at room temperature. The particles exhibit a needle‐like morphology composed of self‐assembled 4 nm nanoparticles. The crystallization process from amorphous TiO₂.1.6H₂O to oriented aggregation of anatase TiO₂ proceeds according to a slow solid dehydration process taking place in a large range of pH in deionized water (1 < pH < 12) or alternatively when including a low amount of NH₄F_(aq) in solution. Driven by their high surface area enhancing the chemical/electrochemical reactivity, it is reported in the case of the anatase TiO₂ that a modification in the lithium insertion mechanism is no longer attributable to a two‐phase reaction between the two‐end members Li_εTiO₂ and Li_0.5±αTiO₂ when downsizing the particle size, but instead through a complete solid solution all along the composition range.     

Surface enhanced Raman scattering of nano diamond using visible‐light‐activated TiO2 as a catalyst to photo‐reduce nano‐structured silver from AgNO3 as SERS‐active substrate

In this work, we demonstrate nano‐structured silver particles photo‐reduced from silver nitride (AgNO₃) solution using visible‐light‐activated titanium dioxide (TiO₂), which can be a convenient and effective substrate for surface enhanced Raman spectroscopy (SERS) observation. Visible‐light‐activated carbon‐containing TiO₂ nanoparticles are applied to photo‐reduce and form nano‐structured silver from AgNO₃ upon visible‐light illumination. Photo‐reduced nano‐structured silver is used as an active substrate for SERS studies of TiO₂ as well as nano diamond and TiO₂. The photo reduction of AgNO₃ and SERS observation can be obtained by simultaneously using the same visible laser excitation. The coexistence of the anatase phase with small admixture of the rutile phase in the TiO₂ can be observed using SERS. The carbon structure in the carbon‐containing TiO₂ was determined to be sp² type carbon bonding by SERS. Copyright © 2009 John Wiley & Sons, Ltd.     

Homo‐Diels–Alder reaction of a very inactive diene,bicyclo[2,2,1]hepta‐2,5‐diene,with the most active dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione. Solvent,temperature, and high pressure influence on the reaction rate

Solvent, temperature, and high pressure influence on the rate constant of homo‐Diels–Alder cycloaddition reactions of the very active hetero‐dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione (1), with the very inactive unconjugated diene, bicyclo[2,2,1]hepta‐2,5‐diene (2), and of 1 with some substituted anthracenes have been studied. The rate constants change amounts to about seven orders of magnitude: from 3.95^.10^?3 for reaction (1+2) to 12200 L mol^?1 s^?1 for reaction of 1 with 9,10‐dimethylanthracene (4e) in toluene solution at 298 K. A comparison of the reactivity (ln k₂) and the heat of reactions (?_r‐nH) of maleic anhydride, tetracyanoethylene and of 1 with several dienes has been performed. The heat of reaction (1+2) is ?218 ± 2 kJ mol^?1, of 1 with 9,10‐dimethylanthracene ?117.8 ± 0.7 kJ mol^?1, and of 1 with 9,10‐dimethoxyanthracene ?91.6 ±0.2 kJ mol^?1. From these data, it follows that the exothermicity of reaction (1+2) is higher than that with 1,3‐butadiene. However, the heat of reaction of 9,10‐dimethylanthracene with 1 (?117.8 kJ mol^?1) is nearly the same as that found for the reaction with the structural C=C counterpart, N‐phenylmaleimide (?117.0 kJ mol^?1). Since the energy of the N=N bond is considerably lower (418 kJ/bond) than that of the C=C bond (611 kJ/bond), it was proposed that this difference in the bond energy can generate a lower barrier of activation in the Diels–Alder cycloaddition reaction with 1. Linear correlation (R = 0.94) of the solvent effect on the rate constants of reaction (1+2) and on the heat of solution of 1 has been observed. The ratio of the volume of activation (?V^≠) and the volume of reaction (?V_r‐n) of the homo‐Diels–Alder reaction (1+2) is considered as “normal”: ?V^≠/?V_r‐n = ?25.1/?30.95 = 0.81. Copyright © 2012 John Wiley & Sons, Ltd.     

Self‐association in {2‐[3,4‐alkylenedioxy‐5‐(3‐pyridyl)]‐thienyl}alkanols: an NMR,IR, and single‐crystal X‐ray study

syn‐2,2,4,4‐Tetramethyl‐3‐{2‐[3,4‐alkylenedioxy‐5‐(3‐pyridyl)]thienyl}pentan‐3‐ols self‐associate both in the solid state and in solution. Single‐crystal X‐ray diffraction study of the 3,4‐ethylenedioxythiophene (EDOT) derivative shows that it exists as a centrosymmetric head‐to‐tail, syn dimer in the solid state. The IR spectra of the solids display only a broad OH absorption around 3300 cm^?1, corresponding to a hydrogen‐bonded species. ¹H Nuclear Overhauser Effect Spectroscopy (NOESY) NMR experiments in benzene reveal interactions between the tert‐butyl groups and the H2 and H6 protons of the pyridyl group. Two approaches have been used to determine association constants of the EDOT derivative by NMR titration, based on the concentration dependence of (i) the syn/anti ratio and (ii) the OH proton shift of the syn rotamer. Reasonably concordant results are obtained from 298 to 323 K (3.6 and 3.9 M^?1, respectively, at 298 K). Similar values are obtained from the syn OH proton shift variation for the 3,4‐methylenedioxythiophene (MDOT) derivative. Concentration‐dependent variation of the anti OH proton shift in the latter suggests that the anti isomer associates in the form of an open, singly hydrogen‐bonded dimer, with a much smaller association constant than the syn rotamer. Self‐association constants for 3‐pyridyl‐EDOT‐alkanols with smaller substituents vary by a factor of 4 from (i‐Pr)₂ up to (CD₃)₂, while the hetero‐association constants for the same compounds with pyridine vary slightly less. Copyright © 2007 John Wiley & Sons, Ltd.     

A New Insight of the Photothermal Effect on the Highly Efficient Visible‐Light‐Driven Photocatalytic Performance of Novel‐Designed TiO2 Rambutan‐Like Microspheres Decorated by Au Nanorods

Photocatalyst‐assisted degradation of organic pollutants, which exhibits a novel strategy for solar‐energy utilization, possesses enormous potential in various applications. Extending the light‐absorption range in the spectrum of sunlight and improving light‐conversion efficiency are always primary issues to enhance the catalytic performance of these photocatalysts. Herein, a new structure of gold‐nanorod‐decorated TiO₂ rambutan‐like microspheres is designed, which exhibits superior photocatalytic ability toward Rhodamine B in the range of visible light due to the 3D distribution of the TiO₂ branches on the surface of the microspheres, which prompts the multireflection of photons. The absorption rate of photons is thereby tremendously enhanced. This is beneficial for the generation of hot electrons originating from the localized surface plasmonic resonance of Au nanorods, which can be used to both initiate the reaction and produce the photothermal effect. Hot electrons generated by a single Au nanorod in microspheres to initiate the degradation reaction can be as high as 2.5 times of those in the nanowires' counterpart. Moreover, the heating power of a single Au nanorod in microspheres reaches up to 4.4 times higher than that in nanowires, which further accelerates the degradation rate. The reaction pathway of visible‐light‐assisted RhB degradation catalyzed by Au/TiO₂ microspheres goes through an initial N‐deethylation process instead of the complete cycloreversion catalyzed by pure TiO₂ microspheres under UV irradiation. This strategy of structure design for improved photon absorption, which achieves high degradation rate and photothermal effect, is promising for the development of novel photocatalysts.     

Kinetics and mechanism for acid‐catalyzed disproportionation of 2,2,6,6‐tetramethylpiperidine‐1‐oxyl

Disproportionation of cyclic nitroxyl radicals (NRs) in acid solutions is of key importance for the chemistry of these compounds. Meanwhile, the data reported on the mechanism of this reaction in dilute acids are inconsistent with those on the stability of NRs in concentrated acids. Here we have examined the kinetics and stoichiometry for the disproportionation of 2,2,6,6‐tetramethylpiperidine‐1‐oxyl ( 1 ) in aqueous H₂SO₄ (1.0–99.3 wt%) and found that (1) the disproportionation of 1 proceeds by the same mechanism over the entire range of acid concentrations, (2) the effective rate constant of the process exhibits a bell‐shaped dependence on the excess acidity function X peaked at X = ?pK _1H+ = 5.8 ± 0.3, (3) a key step of the process involves the oxidation of 1 with its protonated counterpart 1H ⁺ yielding oxopiperidinium cation 2 and hydroxypiperidine 3 at a rate constant of (1.4 ± 0.8) × 10⁵ M^?1 · s^?1, and (4) the reaction is reversible and, upon neutralization of acid, disproportionation products 2 and 3H ⁺ comproportionate to starting 1 . In highly acidic media, the protonated form 1H ⁺ is relatively stable due to a low disproportionation rate. Based on the known and newly obtained values of equilibrium constants, both the standard redox potential for the 1H ⁺ / 3 pair (955 ± 15 mV) and the pH‐dependences have been calculated for the reduction potentials of 1 and 2 to hydroxylamine 3 that is in equilibrium with its protonated 3H ⁺ and deprotonated 3 ^? forms. The data obtained provide a deeper insight into the mechanism of nitroxyl‐involving reactions in chemical and biological systems. Copyright © 2008 John Wiley & Sons, Ltd.     

Complexation of bis‐crown stilbene with alkali and alkaline‐earth metal cations. Ultrafast excited state dynamics of the stilbene‐viologen analogue charge transfer complex

The complex formation of bis(18‐crown‐6)stilbene ( 1 ) and its supramolecular donor‐acceptor complex with N,N′‐bis(ammonioethyl) 1,2‐di(4‐pyridyl)ethylene derivative ( 2 ) with alkali and alkaline‐earth metal perchlorates has been studied using absorption, steady‐state fluorescence, and femtosecond transient absorption spectroscopy. The formation of 1 ?Mⁿ⁺ and 1 ?(Mⁿ⁺)₂ complexes in acetonitrile was demonstrated. The weak long‐wavelength charge‐transfer absorption band of 1 · 2 completely vanishes upon complexation with metal cations because of disruption of the pseudocyclic structure. The spectroscopic and luminescence parameters, stability constants, and 2‐stage dissociation constants were calculated. The initial stage of a recoordination process was found in the excited complexes 1 ?M⁺ and 1 ?(M⁺)₂ (M = Li, Na). The pronounced fluorescence quenching of 1 · 2 is explained by very fast back electron transfer (τ_et = 0.397 ps). The structure of complex 1 · 2 was studied by X‐ray diffraction; stacked ( 1 · 2 )_m polymer in which the components were connected by hydrogen bonding and stacking was found in the crystal. These compounds can be considered as novel optical molecular sensors for alkali and alkaline‐earth metal cations.     

Ag‐doped TiO2 enhanced photocatalytic oxidation of 1,2‐cyclohexanediol

The superiority of silver‐doped titania for photocatalytic oxidation (PCO) of organic compounds inspired us to investigate PCO of 1,2‐cyclohexanediol. Ag/TiO₂ was prepared, characterized (nanosize 19–24 nm) and used for oxidation of 1,2‐cyclohexanediol (1) in acetonitrile. The photolysate was analyzed using GC and GC/MS techniques. The PCO products are 2‐hydroxylcyclohexanone (2), 1,2‐cyclohexandione (3), 2‐cyclohexenone(4), cyclohexanone (5), and adipic acid (6).The formation of electron–hole pair at the surface of the catalyst followed by oxidation reactions was the suggested mechanism. Kinetic studies revealed first‐order mechanism for PCO of 1 and rate constant (k) = ?0.145 h^–1. Copyright © 2012 John Wiley & Sons, Ltd.     

Selectivity in the photo‐Fenton and photocatalytic hydroxylation of biphenyl‐4‐carboxylic acid and derivatives (viz. 4‐phenylsalicylic acid and 5‐phenylsalicylic acid)

The selectivity of hydroxylation of the distal rings of 4‐phenylbenzoic acid, 4‐phenylsalicylic acid, and 5‐phenylsalicylic acid were determined using partial TiO₂‐mediated photocatalytic degradation and photo‐Fenton conditions. This separation of the binding site from the phenyl group being hydroxylated allows a less‐biased evaluation. The hydroxylation regiochemistry behaves as qualitatively expected for an electrophilic reaction, given the assumption that 4‐carboxyphenyl is a slightly electron‐withdrawing substituent. Selectivity for hydroxylation of the distal phenyl in 4‐ and 5‐phenylsalicylic acid is reversed, due to the reversal of the electronic demand, while adsorption to the TiO₂ surface is assumed to be analogous for the two structures. Copyright © 2011 John Wiley & Sons, Ltd.     

4‐Phenyl‐1,2,4‐triazoline‐3,5‐dione in the ene reactions with cyclohexene, 1‐hexene and 2,3‐dimethyl‐2‐butene. The heat of reaction and the influence of temperature and pressure on the reaction rate

The values of the enthalpy (53.3; 51.3; 20.0 kJ mol^?1), entropy (?106; ?122; ?144 J mol^?1K^?1), and volume of activation (?29.1; ?31.0; ?cm³ mol^?1), the reaction volume (?25.0; ?26.6; ?cm³ mol^?1) and reaction enthalpy (?155.9; ?158.2; ?150.2 kJ mol^?1) have been obtained for the first time for the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione 1 , with cyclohexene 4 , 1‐hexene 6 , and with 2,3‐dimethyl‐2‐butene 8 , respectively. The ratio of the values of the activation volume to the reaction volume (?V^≠_corr/ΔV_{r ? n}) in the ene reactions under study, 1 + 4 → 5 and 1 + 6 → 7 , appeared to be the same, namely 1.16. The large negative values of the entropy and the volume of activation of studied reactions 1 + 4 → 5 and 1 + 6 → 7 better correspond to the cyclic structure of the activated complex at the stage determining the reaction rate. The equilibrium constants of these ene reactions can be estimated as exceeding 10¹⁸ L mol^?1, and these reactions can be considered irreversible. Copyright © 2014 John Wiley & Sons, Ltd.     

Use of N‐chloro‐N‐methyl‐p‐toluenesulfonamide in N‐chlorination reactions

Second‐order rate constants (k₂) were determined for the addition of ten nitrogenous organic compounds (benzylamine, 2,2,2‐trifluoethylamine chlorhidrate, methylamine chlorhidrate, glycine ethyl ester chlorhidrate, glycine, glycylglycine chlorhidrate, morpholine, pyperidine, pyperazine and dimethylamine) to the N‐chloro‐N‐methyl‐p‐toluenesulfonamide (NCNMPT) in the formation reaction of N‐chloramines in aqueous solution at 25 °C and ionic strength 0.5 M. The series of nucleophiles considered is structurally very varied and covers five pK_a units. The kinetic behaviour is similar for all compounds, being the elementary step the transfer of chlorine from the NCNMPT molecule to the nitrogen of the free amino group. These reactions were found first order in both reagents. The values of the rate constants indicate that the more basic amines produce N‐chloramines more readily. Rate constants for the nucleophilic attack are shown to correlate with literature data for some of these nitrogenous organic compounds in their reaction with N‐methyl‐N‐nitroso‐p‐toluenesulfonamide. Both reactions involve that the rate determining step is the attack of nitrogenous compounds upon electrophilic centre (Cl or else NO group). NCNMPT is a particularly interesting substrate, for which has not hitherto been published kinetic information, that allows us to assess the efficiency and the competitiveness of this reaction and compare it with other agents with a Cl⁺ atom. Copyright © 2013 John Wiley & Sons, Ltd.     

Investigation of N‐carbamoylamino acid nitrosation by {NO + O2} in the solid‐gas phase. Effects of NOx speciation and kinetic evidence for a multiple‐stage process

Nitrosation of N‐carbamoylamino acids (CAA) by gaseous NO + O₂, an interesting synthetic pathway to amino acid N‐carboxyanhydrides (NCA), alternative to the phosgene route, was investigated on N‐carbamoyl‐valine either in acetonitrile suspension or solventless conditions, and compared to the classical nitrosating system NaNO₂ + CF₃COOH (TFA), the latter being quite less efficient in terms of either rate, stoichiometric demand, or further tractability of the product. The rate and efficiency of the NO + O₂ reaction mainly depends on the O₂/NO ratio. Evaluation of the contribution of various nitrosating species (N₂O₃, N₂O₄, HNO₂) through stoichiometric balance showed the reaction to be effected mostly by N₂O₃ for O₂/NO ratios below 0.3, and by N₂O₄ for O₂/NO ratios above 0.4. The relative contribution of (subsequently formed) HNO₂ always remains minor. Differential scanning calorimetry (DSC) monitoring of the reaction in the solid phase by either HNO₂ (from NaNO₂ + TFA), gaseous N₂O₄ or gaseous N₂O₃, provides the associated rate constants (ca. 0.1, 2 and 10⁸ s^?1 at 25°C, respectively), showing that N₂O₃ is by far the most reactive of these nitrosating species. From the DSC measurement, the latent heat of fusion of N₂O_3, 2.74 kJ · mol^?1 at ?105 °C is also obtained for the first time. The kinetics was investigated under solventless conditions at 0°C, by either quenching experiments or less tedious, rough calorimetric techniques. Auto‐accelerated, parabolic‐shaped kinetics was observed in the first half of the reaction course, together with substantial heat release (temperature increase of ca. 20°C within 1–2 min in a 20‐mg sample), followed by pseudo‐zero‐order kinetics after a sudden, important decrease in apparent rate. This kinetic break is possibly due to the transition between the initial solid‐gas system and a solid‐liquid‐gas system resulting from water formation. Overall rate constants increased with parameters such as the specific surface of the solid, the O₂/NO ratio, or the presence of moisture (or equivalently the hydrophilicity of the involved CAA), however without precise relationship, while the last two parameters may directly correlate to the increasing acidity of the medium. Copyright © 2007 John Wiley & Sons, Ltd.     

Electronic structure and enhanced visible‐light absorption of N,B‐codoped TiO2

We present GGA+U calculations to investigate the electronic structure and visible‐light absorption of N,B‐codoped anatase TiO₂. The N_sB_i (substitutional N, interstitial B) codoped TiO₂ produces significant Ti 3d and N 2p mid‐gap states when the distance of N and B atoms is far, whereas the N_iB_i (interstitial N and B) and N_sB_s (substitutional N and B) codoped TiO₂ prefer to form localized p states at 0.3–1.2 eV above the valence band maximum. Further, the optical band edges of the three codoped systems shift slightly to the visible region, but only the far‐distance N_sB_i codoped TiO₂ clearly shows an optical transition. These results indicate that N_sB_i codoped TiO₂ has a dominant contribution to the optical absorption of N,B‐codoped TiO₂. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Adsorption study of 4‐MBA on TiO2 nanoparticles by surface‐enhanced Raman spectroscopy

In this paper, the adsorption of 4‐mercaptobenzoic acid (4‐MBA) on TiO₂ nanoparticles was studied mostly by surface‐enhanced Raman spectroscopy (SERS) and UV‐vis spectroscopy, at different pH values as well as under different temperatures and concentrations. The results show that the 4‐MBA molecules are bonded to the TiO₂ surface both through the sulfur atoms and COO⁻ groups at neutral or alkaline pH, but only through the sulfur atom at acidic pH. Furthermore, the 4‐MBA molecules possess high adsorptive stability on TiO₂ at a comparatively high temperature (150 °C). Concentration‐dependent SERS experiments show that the saturation concentration for 4‐MBA adsorbed on TiO₂ is about 10⁻³ M in natural case (pH = 6). Copyright © 2009 John Wiley & Sons, Ltd.     

Influence of light waves on the thermoelectric power under large magnetic field in III‐V,ternary and quaternary materials

We study theoretically the influence of light waves on the thermoelectric power under large magnetic field (TPM) for III‐V, ternary and quaternary materials, whose unperturbed energy‐band structures, are defined by the three‐band model of Kane. The solution of the Boltzmann transport equation on the basis of this newly formulated electron dispersion law will introduce new physical ideas and experimental findings in the presence of external photoexcitation. It has been found by taking n‐InAs, n‐InSb, n‐Hg_1‐xCd_xTe and n‐In_1‐xGa_xAs_yP_1‐y lattice matched to InP as examples that the TPM decreases with increase in electron concentration, and increases with increase in intensity and wavelength, respectively in various manners. The strong dependence of the TPM on both light intensity and wavelength reflects the direct signature of light waves that is in direct contrast as compared with the corresponding bulk specimens of the said materials in the absence of external photoexcitation. The rate of change is totally band‐structure dependent and is significantly influenced by the presence of the different energy‐band constants. The well‐known result for the TPM for nondegenerate wide‐gap materials in the absence of light waves has been obtained as a special case of the present analysis under certain limiting conditions and this compatibility is the indirect test of our generalized formalism. Besides, we have also suggested the experimental methods of determining the Einstein relation for the diffusivity:mobility ratio, the Debye screening length and the electronic contribution to the elastic constants for materials having arbitrary dispersion laws.     

A combined experimental and density functional study of 1‐(arylsulfonyl)‐2‐R‐4‐chloro‐2‐butenes reactivity towards the allylic chlorine

Nucleophilic substitution and dehydrochlorination reactions of a number of the ring‐substituted 1‐(arylsulfonyl)‐2‐R‐4‐chloro‐2‐butenes are studied both experimentally and theoretically. The developed synthetic procedures are characterized by a general rapidity, cheapness, and simplicity providing moderate to high yields of 1‐arylsulfonyl 1,3‐butadienes (48–95%), 1‐(arylsulfonyl)‐2‐R‐4‐(N,N‐dialkylamino)‐2‐butenes (31–53%), 1‐(arylsulfonyl)‐2‐R‐2‐buten‐4‐ols (37–61%), and bis[4‐(arylsulfonyl)‐3‐R‐but‐2‐enyl]sulfides (40–70%). The density functional theory B3LYP/6‐311++G(2d,2p) calculations of the intermediate allylic cations in acetone revealed their high stability occurring from a resonance stabilization and hyperconjugation by the SO₂Ar group. The reactivity parameters estimated at the bond critical points of the diene/allylic moiety display a high correlation (R² > 0.97) with the Hammett (σ_p) constants. 1‐Arylsulfonyl 1,3‐butadienes are characterized by a partly broken π conjugated system, which follows from analysis of the two‐centered delocalization (δ) and localization (λ) index values. The highest occupied molecular orbital energies of 1‐arylsulfonyl 1,3‐butadienes are lower than those of 1,3‐butadiene explaining their low reactivity towards the Diels–Alder condensation. Copyright © 2015 John Wiley & Sons, Ltd.     

Role of gemini surfactants (m‐s‐m type; m = 16, s = 4–6) on the reaction of [Zn(II)‐Gly‐Phe]+ with ninhydrin

In the present paper, reaction of zinc‐glycylphenylalanine ([Zn(II)‐Gly‐Phe]⁺) with ninhydrin has been investigated in gemini (m‐s‐m type; m = 16, s = 4–6) surfactants at temperature (70 °C) and pH (5.0). Monitoring the appearance of product at 400 nm was used to follow the kinetics, spectrophotometrically. The order of the reaction with respect to [Zn(II)‐Gly‐Phe]⁺ was unity while with respect to [ninhydrin] was fractional. The reaction constants involved in the mechanism were obtained. In addition to the rate constant (k_Ψ) increase and leveling‐off regions are observed with the geminis, just like as seen with conventional surfactant hexadecyltrimethylammonium bromide (CTAB), the former produced a third region of increasing k_Ψ at higher concentrations. A close agreement between observed and calculated rate constants was found under varying experimental conditions. A suitable mechanism consistent with the experimental findings has been proposed. Copyright © 2014 John Wiley & Sons, Ltd.     

Trends in properties of para‐substituted 3‐(phenylhydrazo)pentane‐2,4‐diones

Trends between the Hammett's σ_p and related normal , inductive σ_I, resonance σ_R, negative and positive polar conjugation and Taft's σ_p° substituent constants and the distance, δ_{N? H} NMR chemical shift, oxidation potential (E_p/2°x, measured in this study by cyclic voltammetry (CV)) and thermodynamic parameters (pK, ΔG⁰, ΔH⁰ and ΔS⁰) of the dissociation process of unsubstituted 3‐(phenylhydrazo)pentane‐2,4‐dione (HL₁) and its para‐substituted chloro (HL₂), carboxy (HL₃), fluoro (HL₄) and nitro (HL₅) derivatives were recognized. The best fits were found for σ_p and/or in the cases of , δ_{N? H} and E_p/2°x, showing the importance of resonance and conjugation effects in such properties, whereas for the above thermodynamic properties the inductive effects (σ_I) are dominant. HL₂ exists in the hydrazo form in DMSO solution and in the solid state and contains an intramolecular H‐bond with the distance of 2.588(3) Å. It was also established that the dissociation process of HL_1–5 is non‐spontaneous, endothermic and entropically unfavourable, and that the increase in the inductive effect (σ_I) of para‐substitutents (? H < ? Cl < ? COOH < ? F < ? NO₂) leads to the corresponding growth of the distance and decrease of the pK and of the changes of Gibbs free energy, of enthalpy and of entropy for the HL_1–5 acid dissociation process. The electrochemical behaviour of HL_1–5 was interpreted using theoretical calculations at the DFT/HF hybrid level, namely in terms of HOMO and LUMO compositions, and of reactivities induced by anodic and cathodic electron‐transfers. Copyright © 2010 John Wiley & Sons, Ltd.     

Bifunctional photocatalysis of TiO2/Cu2O composite under visible light: Ti in organic pollutant degradation and water splitting

Photocatalytic experiment results under visible light demonstrate that both TiO₂ and Cu₂O have low activity for brilliant red X-3B degradation and neither can produce H₂ from water splitting. In comparison, TiO₂/Cu₂O composite can do the both efficiently. Further investigation shows that the formation of Ti³⁺ under visible light has great contribution. The mechanism of photocatalytic reaction is proposed based on energy band theory and experimental results. The photogenerated electrons from Cu₂O were captured by Ti⁴⁺ ions in TiO₂ and Ti⁴⁺ ions were further reduced to Ti³⁺ ions. Thus, the photogenerated electrons were stored in Ti³⁺ ions as the form of energy. These electrons trapped in Ti³⁺ can be released if a suitable electron acceptor is present. So, the electrons can be transferred to the interface between the composite and solution to participate in photocatalytic reaction. XPS spectra of TiO₂/Cu₂O composite before and after visible light irradiation were carried out and provided evidence for the presence of Ti³⁺. The image of high-resolution transmission electron microscopy demonstrates that TiO₂ combines with Cu₂O tightly. So, the photogenerated electrons can be transferred from Cu₂O to TiO₂.     

Reactions of O‐aryl S‐aryl dithiocarbonates with secondary alicyclic amines in aqueous ethanol. Kinetics and mechanism

The reactions of O‐(4‐methylphenyl) S‐(4‐nitrophenyl), O‐(4‐chlorophenyl) (4‐nitrophenyl), O‐(4‐chlorophenyl) S‐phenyl, and O‐(4‐methylphenyl) S‐phenyl dithiocarbonates ( 1 , 2 , 3 , and 4 , respectively) with a series of secondary alicyclic (SA) amines are subjected to a kinetic investigation in 44 wt% ethanol‐water, at 25.0 °C and an ionic strength of 0.2 M. The reactions are followed spectrophotometrically. Under amine excess, pseudo‐first‐order rate coefficients (k_obs) are found. For some of the reactions, plots of k_obs vs. free amine concentration at constant pH are linear but others are nonlinear upwards. This kinetic behavior is in accordance with a stepwise mechanism with two tetrahedral intermediates, one zwitterionic (T^±) and the other anionic (T^?). In some cases, there is a kinetically significant proton transfer from T^± to an amine to yield T^?. Values of the rate micro constants k₁ (amine attack to form T^±), k_?1 (its back step), k₂ (nucleofuge expulsion from T^±), and k₃ (proton transfer from T^± to the amine) are determined for some reactions. The Brønsted plots for k₁ are linear with slopes β₁ = 0.2–0.4 in accordance with the slope values found when T^± formation is the rate‐determining step. The sensitivity of log k₁ and log k_?1 to the pK_a of the amine, leaving and non‐leaving groups are determined by a multiparametric equation. For the reactions of 1 – 4 with 1‐formylpiperazine and those of 3 and 4 with morpholine the k₂ and k₃ steps are rate determining. Copyright © 2010 John Wiley & Sons, Ltd.