铝板中Lamb波检测的实验研究

Lamb波在传播过程中具有频散及多模态特性,若相关参数选择不当,会导致在实际应用中信号相互叠加而无法识别。本文基于Lamb波的频散曲线是其频散方程实数解分布的特点,采用二分法绘制了铝板中Lamb波的频散曲线、波结构曲线和入射角曲线。根据曲线选择S0模态的Lamb波对1mm厚铝板中不同类型的缺陷进行检测。实验结果表明,S0模态的Lamb波对裂纹型缺陷和贯穿型缺陷十分敏感,但对于裂纹型缺陷,其幅值变化并不与缺陷大小成线性关系,并且S0模态Lamb波的声场指向性十分集中,在偏离声束轴线时无法检测到缺陷。     

声表面波检测铝板表面微缺陷深度实验研究

为了探究声表面波与不同深度微裂纹缺陷相互作用的关系,将脉冲激光作用于一系列不同缺陷的试件铝板上进行线光源激励,激发激光超声波。用超声传感器接收在铝板中传播的激光超声信号,通过数字荧光示波器采集激光超声在铝板中的传播数据。对采集到的反射波数据进行分离谱分离过程得到的铝板中激光超声的时域分布和透射波数据进行频域分析。实验发现:缺陷深度影响着反射回波两峰值特征点到达时间差,两者之间近似线性关系,也影响着透射波的截止频率且二者呈现递减关系。     

基于空耦超声Lamb波的金属板状结构内部缺陷检测方法

针对接触式超声检测方法在金属板结构内部缺陷实际工程检测中存在的环境要求高、效率低、操作难度高等问题,提出了空耦超声Lamb波检测方法,该方法能更好地适应现场应用环境,提高检测效率,减少传感器数量。通过有限元仿真和实验分析比较了空耦超声检测与接触式超声检测两种方法接收到的信号和成像效果。结果表明:有限元仿真和实验中,空耦超声检测方法对缺陷位置的定位误差分别为2 mm和3.6 mm,接触式检测方法对缺陷位置的定位误差分别为2 mm和11.3 mm,空耦检测具有较高的定位精度;单侧激励条件下,适合采用A0模态Lamb波对板内缺陷进行检测;空耦超声检测可以通过调整信号接收角度接收单一模态Lamb波,避免伪像产生。该方法为后续金属板状结构内部缺陷的空耦超声检测提供参考。     

多通道超声兰姆波检测板状结构中的裂纹

超声兰姆(Lamb)波在结构缺陷检测方面愈来愈受到重视,但目前Lamb波的应用局限于单信号源激励,单通道接收的方法,容易受到噪声干扰,其后续的信号分析处理也比较复杂。本文旨在采用多通道Lamb波对板状结构中的裂纹进行定量分析与诊断。在铝板的表面凿刻出不同深度的凹槽作为裂纹,通过线阵换能器采集在一定传播距离内的多通道Lamb波信号,并采用二维傅里叶变换分析在不同深度的裂纹下,Lamb波模式能量的变化规律。结果表明,相对于完好铝板中的Lamb波信号,裂纹的存在会使Lamb波发生模式转换现象,并且转换模式能量百分比随裂纹深度的增加而线性增加。其结果为Lamb波评价板状结构中的裂纹状况提供了一种可能的方法。     

翻边压电晶片激励Lamb波声场研究

压电晶片广泛应用于超声波检测领域,是激励和接收超声波的最主要器件之一。本文通过实验、有限元压电模拟和半解析数值模拟,研究用压电晶片在板中激励Lamb波,三种方法得到的Lamb波信号中S0模态非常吻合,A0模态处稍有差异。同时还分析了晶片的电极形态对声场分布以及声场能量的影响,声场随着电极面积比变化而变化。研究结果可为压电晶片的实际使用提供参考。     

周向超声导波对管道纵向缺陷检测的研究

在弹性动力学理论的基础上,研究了管道中周向超声导波的传播及其频散特性,并数值计算了周向导波的频散曲线。通过所建立的超声导波实验系统,在理论上与实验上研究了斜探头的入射角、频率及周向导波模态的关系,并在外径为88.8 mm、内径为80.8 mm的管道中激励出特定的单一模态周向导波;同时,利用单一模态周向导波对该管道表面上长25 mm、宽1 mm、深0.7 mm的人工缺陷进行了检测。结果表明,同在板中激励单一Lamb波模态类似,选用特定角度的斜探头与特定频率可在管道中激励出单一周向导波模态并有望应用于管道缺陷的检测。     

采用超声导波阵列技术研究板类结构大面积检测

超声导波阵列检测技术可以实现板类结构的快速、大面积检测,是工业领域中最有前景的技术之一。针对目前此技术中存在的单一模态传感器难制作、检测频率高(一般在200 kHz以上)、需非常密集的传感器阵列和成像分辨率低等问题,本文采用一种圆环形线圈EMAT (Electromagnetic Acoustic Transducer),在较低频率15 kHz激励产生单一A0模态Lamb波,由8个传感器组成环形阵列,利用TFM (Total Focus Method)进行成像,实现了超声Lamb波对板类结构的快速、大面积检测。对一块包含直径为27 mm通孔的3 mm厚铝板进行实验研究,结果表明,此系统具有较高的测量稳定性和成像分辨率,能快速定位缺陷,适用于对板类结构进行大面积粗检。在对检测系统盲区形成原因分析的基础上,建立了一种计算盲区范围的方法。      

超声Lamb波二次谐波发生效率分析与模式选择

在导波模式展开分析方法的基础上,提出激发效率参量来定量表征超声Lamb波积累二次谐波的发生效率。以P92钢板为例,理论计算得到了与频散曲线对应的理论激发效率参量分布图谱,从图谱中选择理论激发效率参量大小不同的两种基频Lamb波模式:纵波型S1模式和交点型A2/S2模式,分别测量这两种基频Lamb波模式在钢板中传播时产生的二次谐波信号。理论计算和实验测量结果表明,这两种基频Lamb波模式的理论和实验激发效率参量的比值基本一致,且激发效率参量较大的纵波型S1模式能激发出效率更高的二次谐波信号。研究结果表明激发效率参量可以有效的用于Lamb波二次谐波发生效率的表征及模式选择。      

小样本字典学习的兰姆波模态识别方法*

针对兰姆波多模态识别问题,提出了基于小样本字典学习的模态识别方法。将多层复合板的频散特性看作一个线性时不变系统,首先,根据频散知识模拟各个模态传播特定距离后的信号,提取走时和能量特征创建字典;其次,获取待测信号的走时特征,通过查询字典来识别兰姆波模态;最后,根据能量参数估计结果,实现待测信号中各模态信号的分离和重构。通过对三层粘接的AAA板(铝板-亚克力板-铝板,每层厚度为2mm)中传播距离为0.3m、0.5m的直达波和反射波的实验验证,结果显示该方法对A0、S0模态的有效识别和各个波包信号的准确重建。     

不锈钢折弯板裂纹Lamb波检测技术*

金属弯板广泛应用于车辆、船舶、飞机等大型装备结构件中，折弯处易形成应力集中产生裂纹，直接影响构件的使用安全和寿命。本文开展了不锈钢弯板裂纹缺陷Lamb波检测技术研究，计算了钢板的频散曲线，优选三种不同频率的S0模态：0.25MHz、0.5MHz、1MHz。利用COMSOL软件建立频域仿真模型，模拟了Lamb波在3mm厚“L”形弯板内部的传播情况，开展折弯板裂纹缺陷检测实验，并使用小波包变换的方法对实验信号进行分析。结果表明，经小波变换后，0.25MHz、0.5MHz、1 MHz的S0模态Lamb波均可用于裂纹缺陷的识别检测.     

Chalcogenide Fibers: An Overview of Selected Applications

Chalcogenide glass fibers have many unique properties that make them attractive for applications that are not possible with silica fibers. Selected applications of chalcogenide fibers in research, commerce, and the military are reviewed.     

Some mathematical aspects of Anderson localization: boundary effect,multimodality, and bifurcation

Anderson localization is a famous wave phenomenon that describes the absence of diffusion of waves in a disordered medium. Here we generalize the landscape theory of Anderson localization to general elliptic operators and complex boundary conditions using a probabilistic approach, and further investigate some mathematical aspects of Anderson localization that are rarely discussed before. First, we observe that under the Neumann boundary condition, the low energy quantum states are localized on the boundary of the domain with high probability. We provide a detailed explanation of this phenomenon using the concept of extended subregions and obtain an analytical expression of this probability in the one-dimensional case. Second, we find that the quantum states may be localized in multiple different subregions with high probability in the one-dimensional case and we derive an explicit expression of this probability for various boundary conditions. Finally, we examine a bifurcation phenomenon of the localization subregion as the strength of disorder varies. The critical threshold of bifurcation is analytically computed based on a toy model and the dependence of the critical threshold on model parameters is analyzed.     

辣椒碱与β-环糊精包合物的核磁共振研究

利用核磁共振方法研究了辣椒碱β-环糊精包合物的化学计量比、空间结构信息及其在水溶液中的自扩散系数. 通过测定不同浓度比的辣椒碱和β-环糊精混合溶液的 ¹H NMR数据,绘制Job's曲线,辣椒碱和β-环糊精的Job's曲线均在r=0.5处出现拐点. 同时测定了该包合物的2D ROESY和DOSY谱图,ROESY谱图中NOE交叉信号出现在辣椒碱的H-1~H-8和β-环糊精的H-3′、H-5′、H-6′之间,DOSY测得β-环糊精和辣椒碱形成包合物前后的表观自扩散系数. 结果表明,辣椒碱β-环糊精包合物的主客体分子的化学计量比为1∶1,辣椒碱分子的异丙基端从β-环糊精的宽口端进入疏水腔,其中H-1~H-8部分在空腔内部,包合物的自扩散系数为2.95×10^-10m²/s.     

Darboux Transformation and N-soliton Solution for Extended Form of Modified Kadomtsev-Petviashvili Equation with Variable-Coefficient

The extended form of modified Kadomtsev-Petviashvili equation with variable-coefficient is investigated in the framework of Painlevé analysis. The Lax pairs are obtained by analysing two Painlevé branches of this equation. Starting with the Lax pair, the N-times Darboux transformation is constructed and the N-soliton solution formula is given, which contains 2n free parameters and two arbitrary functions. Furthermore, with different combinations of the parameters, several types of soliton solutions are calculated from the first order to the third order. The regularity conditions are discussed in order to avoid the singularity of the solutions. Moreover, we construct the generalized Darboux transformation matrix by considering a special limiting process and find a rational-type solution for this equation.     

Thermodynamics of 4D dS/AdS Gauss–Bonnet black holes according to consistent gravity theory in the presence of a cloud of strings

By looking at the Lovelock theorem one can infer that the gravity model given by [1] cannot be applicable for all types of 4D Einstein–Gauss–Bonnet (EGB) curved space-time. The reason for this is that in 4D space-time, the Gauss–Bonnet invariant is a total derivative and hence it does not contribute to gravitational dynamics. Hence, the authors of [2] presented an alternative consistent EGB gravity model instead of [1] by applying a break-of-diffeomorphism property. In this work, we use the alternative model to produce a de Sitter (dS)/Anti-de Sitter (AdS) black hole metric and then investigate its thermodynamic behavior in the presence of a cloud of Nambu–Goto strings. Mathematical derivations show that the resulting diagrams of pressure vs specific volume at a constant temperature are similar to that for a van der Waals gas/fluid in an ordinary thermodynamic system in the dS sector but not in the AdS background. From this, we infer that the black hole participates in the small-to-large black hole phase transition in the dS background, while it exhibits a Hawking–Page phase transition in the AdS background. In the latter case, an evaporating black hole eventually reaches an AdS vacuum space because of its instability.     

Bidirectional Quantum Secure Direct Communication Network Protocol with Hyperentanglement

We propose a bidirectional quantum secure direct communication (QSDC) network protocol with the hyperentanglment in both the spatial-mode ad the polarization degrees of freedom of photon pairs which can in principle be produced with a beta barium borate crystal. The secret message can be encoded on the photon pairs with unitary operations in these two degrees of freedom independently. Compared with other QSDC network protocols, our QSDC network protocol has a higher capacity as each photon pair can carry 4 bits of information. Also, we discuss the security of our QSDC network protocol and its feasibility with current techniques.     

Chess AI: Competing Paradigms for Machine Intelligence

Endgame studies have long served as a tool for testing human creativity and intelligence. We find that they can serve as a tool for testing machine ability as well. Two of the leading chess engines, Stockfish and Leela Chess Zero (LCZero), employ significantly different methods during play. We use Plaskett’s Puzzle, a famous endgame study from the late 1970s, to compare the two engines. Our experiments show that Stockfish outperforms LCZero on the puzzle. We examine the algorithmic differences between the engines and use our observations as a basis for carefully interpreting the test results. Drawing inspiration from how humans solve chess problems, we ask whether machines can possess a form of imagination. On the theoretical side, we describe how Bellman’s equation may be applied to optimize the probability of winning. To conclude, we discuss the implications of our work on artificial intelligence (AI) and artificial general intelligence (AGI), suggesting possible avenues for future research.     

Double Diffractive Dissociation Process p + p(p) → Xp + Xp(p) + Π+ + Π- at High Energy and the Pomeron Model of Donnachie-Landshoff

Large p_γ charged pion pair produced in Double Diffractive Dissocjation (DDD) process at high energy is studied with double pomeron (IP) exchange mechanism. Using DonnachieLandshoff pomeron model we have calculated the cross-section of the process at the energy interval from ISR to LHC when the rapidity of the charged pions is approximately equal to zero. It is shown that this process is the favorite in experiments which could effectively be used to examine Donnachie-Landshoff pomeron model and provide a possibility to check the value of the suppression coefficient N².     

The ρ-π Puzzle of J/φ and φ′ Decays

The recent BES Collaboration data on φ →PV, particularly the isospin violating mode φ′ → π^oω^o and finding of a finite number for B(φ′ → K^*OK^O), enable us now to deal more precisely about the challenges to theory concerning this extraordinary and remarkableso-called ρ-π puzzle of J/φ and φ′ decays. In terms of the existing data and deploying the simplest phenomenology, measurement of φ′ → π⁺π^- and whether a finite number for the K^*+K^- mode might require a significantly large accumulation of data remain interesting questions.     

CFETR N-NBI验证样机恒温供水系统的设计

通过分析中国聚变工程实验堆(CFETR)的基于负离子源的中性束注入系统(N-NBI)验证样机中等离子体电极的工况,确定了其恒温供水的技术参数,设计出了CFETR N-NBI验证样机恒温供水系统。