QuEChERS/超高效液相色谱-串联质谱法测定土壤中31种磺酰脲类除草剂残留

建立了一种基于QuEChERS前处理技术和超高效液相色谱-串联质谱(UHPLC-MS/MS)同时测定土壤中31种磺酰脲类除草剂残留的方法。通过对色谱条件、提取溶剂、净化剂等进行优化,确定以甲醇和0.1%甲酸+5 mmol/L乙酸铵为流动相,1%(体积分数)乙酸-乙腈为提取溶剂,C18(25.00 mg/mL)为净化剂。31种磺酰脲类除草剂的线性关系良好,相关系数(r2)均不小于0.998 0,定量下限(S/N=10)为0.012~2.321μg/kg。3个加标水平(10、100、400μg/kg)下的平均回收率为71.8%~119%,相对标准偏差(RSD)为0.62%~13%。除烟嘧磺隆、三氟啶磺隆钠、玉嘧磺隆、啶嘧磺隆、氯吡嘧磺隆为中等强度基质效应外,其余待测物均表现为弱基质效应。该方法简便易操作,具有较好的灵敏度和准确度,适用于土壤中31种磺酰脲类除草剂残留的同时检测。     

玉米中9种磺酰脲类除草剂的超高效液相色谱-串联质谱法同时测定

采用超高效液相色谱-串联四极杆质谱(UPLC-MS/MS),在多反应监测(MRM )模式下建立了玉米中9种磺酰脲类除草剂残留的定性定量分析方法.样品浸泡后采用甲醇-丙酮(体积比1:1)提取、浓缩,经C18固相萃取柱净化处理.采用UPLC-ESI MS/MS方法测定,外标法定量.9种磺酰脲类除草剂在0.05～2.0 mg...     

高效液相色谱/质谱法测定土壤中10种磺酰脲类除草剂多残留

建立了高效液相色谱/质谱法(HPLC-MS)同时检测土壤中10种磺酰脲类除草剂多残留量的方法。样品在磷酸缓冲液(pH值7.8):甲醇(8∶2,V/V)中经超声波萃取,提取液直接经固相萃取小柱净化,采用HPLC-ESI( )-MS进行定性定量分析。比较了C leanert C18,C leannertHXN和Oasis HLB 3种SPE商品柱的净化效果,结果表明C leanert C18和C leannertHXN柱的净化效果和回收率均较好。10种磺酰脲类农药的液相色谱分离在乙腈-甲醇-水(0.2%冰醋酸)梯度洗脱下完成,10个化合物的保留时间在10~16 m in。10种磺酰脲类除草剂在0.1~10.0 mg/L范围内线性良好,相关系数均在0.9964~0.9989之间;相对标准偏差在0.99%~4.26%之间。在0.01~1.0 mg/kg添加水平范围内,平均添加回收率在80.2%~104.5%之间(除苯磺隆)。本方法中10种磺酰脲类除草剂在土壤中的检出限为0.6~3.5μg/kg之间。     

超高效液相色谱-串联质谱法测定人参中磺酰脲类除草剂残留量

建立了人参中15种磺酰脲类除草剂残留量的超高效液相色谱-串联质谱(UPLC-MS/MS)检测方法。样品中残留的农药经乙腈提取、石墨化炭黑(ENVI-Carbon)固相萃取柱净化后,使用含1%(v/v)甲酸的甲醇-二氯甲烷(20:80, v/v)洗脱,UPLC分离,最后采用电喷雾串联质谱在正离子多反应监测(MRM)扫描模式下进行测定。15种农药在2～100 μg/L的质量浓度范围内线性关系良好,相关系数在0.996和0.999之间。对人参中15种农药在5、25和50 μg/kg 3个添加水平下的回收率进行了测定,其平均回收率在84.9%和104.3%之间,相对标准偏差在2.4%和11.9%之间。各种农药的定量限均为5 μg/kg。该方法操作简便,净化效果好,灵敏度、准确度和精密度均符合多残留检测技术的要求,可为中药材中磺酰脲类除草剂污染状况调查提供检测方法支持。     

超高效液相色谱-串联质谱法测定茶叶和土壤中丁醚脲及其代谢物的残留

建立了超高效液相色谱-串联质谱同时快速测定茶叶和土壤中丁醚脲及其代谢物残留量的方法.样品采用乙腈提取,加入乙酸铵和NaCl进行液液分配,PSA结合GCB进行同相分散萃取除杂质,Waters AcquityUPLC BEH C18柱(100 mm× 2.1 mm×1.7 μm)分离,超高效液相色谱-串联质谱法测定.在2....     

QuEChERS/超高效液相色谱-串联质谱测定人全血中24种磺酰脲类除草剂

建立了QuEChERS/超高效液相色谱-串联质谱测定人全血中24种磺酰脲类除草剂的方法。对QuEChERS方法进行优化,样品加入NaCl和无水Na₂SO₄并取上层清液经Simple-QuEChERS Nano净化柱净化。采用EclipsePlus C18 RRHD色谱柱分离,以乙腈-水（含0.1‰甲酸）为流动相进行梯度洗脱,在多反应监测（MRM）模式下进行检测,内标法定量。在各自线性范围内,24种磺酰脲类除草剂线性关系良好（r> 0.995）;检出限为0.1～0.2 ng/mL,定量限为0.2～0.5 ng/mL。加标回收率为93.4%～112.3%,日内相对标准偏差（RSD）为0.6%～8.1%,日间RSD为3.3%～9.7%。方法已用于实际案例中磺酰脲类除草剂的检测。     

高效液相色谱法测定化妆品中4种禁用醛酮化合物

建立了同时测定化妆品中4种禁用醛酮化合物(巴豆醛、苯乙酮、2,4-二羟基-3-甲基苯甲醛和2-亚戊基环己酮)的高效液相色谱(HPLC)分析方法。样品使用50%乙腈(体积比)溶液提取,经AQ-C18(4.6 mm×150 mm,5μm)色谱柱分离后,高效液相色谱/二极管阵列检测器检测,以保留时间和紫外吸收光谱定性,外标法定量,高效液相色谱-质谱/质谱法确证。结果表明,4种醛酮化合物在0.05~2.0 mg/L质量浓度范围内呈良好的线性关系,相关系数均不小于0.999 9;方法检出限和定量下限分别为0.5~1.0 mg/kg和1.5~3.0 mg/kg。样品加标回收率为89.0%~106.7%,相对标准偏差(RSDs,n=6)为2.0%~6.9%。该方法准确可靠,适用于化妆品中4种禁用醛酮化合物的测定。     

固相萃取-超高效液相色谱/串联质谱法同时测定水中27种磺酰脲类除草剂

采用固相萃取,用超高效液相色谱-串联质谱法(UPLC-MS/MS)建立了水中27种磺酰脲类除草剂的分析方法。通过对固相萃取柱、淋洗液、流动相等的优化,确定以Oasis HLB固相萃取柱、乙腈为淋洗液、0.1%乙酸-甲醇(7∶3,V/V)为流动相做水样预处理。在最优条件下,目标物回收率均为79.8%~124.5%,相对标准偏差(RSDs)为6.9%~9.6%,线性范围均为1~2 000μg/L,线性相关系数(R2)在0.999以上。该方法具有检测限低、回收率高等优点,经实际样品测试,可适用于水中27种磺酰脲类除草剂残留的同时检测。     

QuEChERS-液相色谱-串联质谱法测定甜玉米及毛豆中32种磺酰脲类除草剂残留

建立了基于QuEChERS方法的液相色谱-串联质谱同时测定甜玉米及毛豆中32种磺酰脲类除草剂残留的方法。以提取液净化前后蒸发残渣质量及回收率为考察指标,评估了C18、氧化锆包覆硅胶(Z-Sep)/C18混合物、C18键合锆胶(Z-Sep+) 3种分散吸附剂对甜玉米的净化效果,结果Z-Sep/C18吸附剂的净化效果最佳。样品采用乙腈提取、无水硫酸镁及氯化钠盐析、Z-Sep/C18分散固相萃取净化;液相色谱以CSH C18色谱柱梯度洗脱分离,质谱分析采用电喷雾负离子电离、按时间表的多反应监测模式(Scheduled MRM),以基质匹配校准曲线外标法进行定量。32种农药在甜玉米及毛豆中3个添加水平(10、20、100 μg/kg)的回收率为80.0%~108.2%,相对标准偏差为1.2%~13.0%, 32种农药的定量限(S/N≥10)为0.2~5.0 μg/kg。方法简便、灵敏、环保,适用于甜玉米及毛豆中32种磺酰类除草剂残留的定性定量分析。     

固相萃取/高效液相色谱法同时测定保健食品中7种磺酰脲类降血糖药物

建立了同时测定保健食品中7种磺酰脲类降血糖药物(格列吡嗪、甲苯磺丁脲、妥拉磺脲、格列齐特、格列本脲、格列美脲和格列喹酮)的固相萃取/高效液相色谱(SPE/HPLC)分析方法。样品经甲醇超声提取,用C18固相萃取柱净化后进行HPLC分析。采用Agilent Zorbax SB-C18色谱柱(250 mm×4.6 mm,5μm),以乙腈(A)-0.02%磷酸溶液(B)为流动相,梯度洗脱,流速1.0 mL/min,柱温30℃,检测波长228 nm。结果表明,7种目标物在0.2~20μg/mL范围内线性关系良好,相关系数(r)大于0.999 9,检出限(LOD,S/N≥3)均为0.1 mg/kg,在5种不同基质中的加标回收率为81%~115%,相对标准偏差(RSD)小于9%。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.