Analysis of ecstasy with a monolithic reversed-phase column

Summary A new, rapid, and precise liquid chromatographic method has been developed for simultaneous identification and quantification of amphetamine,N-methyl-3,4-methylenedioxymetamphetamine,N-ethyl-3,4-methylenedioxymetamphetamine, andN-methyl-1-(3,4-methyl-enedioxyphenyl)-2-butanamine in the presence of other constituents. The compounds were separated on a monolithic column with a gradient prepared from acetonitrile and 20mm monobasic potassium buffer at a flow rate of 1.5 mL min⁻¹. Quantitation was performed with metoclopramide as internal standard. Use of different flow rates was investigated and enabled reduction of the separation time from 11 to 3.5 min for seven substances. The method was then applied to ten seized tablets to identify and quantify their active ingredients.     

反相毛细管整体柱的制备及其在多肽混合物分离中的应用

采用甲基丙烯酸月桂酯为基础功能单体,乙二醇二甲基丙烯酸酯为交联剂,正十二醇、1,4-丁二醇及二甲基亚砜为致孔剂,在内径为75 μm的石英毛细管内制备了具有良好机械性能及化学稳定性的反相毛细管整体柱。考察了致孔剂的种类、比例以及交联剂在单体混合物中的比例对柱压和分离效果的影响;以单体15%、交联剂15%、致孔剂70%(均为质量分数)作为优化配方,在70 ℃条件下反应24 h;并对所合成的毛细管整体柱进行了电镜表征,测试了流速、柱长与柱压的关系。结果表明,毛细管整体柱的通透性良好,可通过延长柱长的方法提高分离效果。将所制备的毛细管整体柱装于纳升级高效液相色谱仪上进行牛血清白蛋白及血浆样本的胰蛋白酶酶切液的分离,获得了比较理想的分离效果。     

Preparation and characterization of lauryl methacrylate-based monolithic microbore column for reversed-phase liquid chromatography

Poly(lauryl methacrylate-co-ethylene dimethacrylate) monoliths were in situ synthesized within the confines of a silicosteel tubing of 1.02 mm i.d. and 1/16" o.d. for microbore reversed-phase HPLC. In order to obtain practically useful monoliths with adequate column efficiency, low flow resistance, and good mechanical strength, some parameters such as total monomer concentration (%T), cross-linking degree (%C) and polymerization temperature were optimized. High-efficiency monoliths were successfully obtained by thermal polymerization of a monomer mixture (40%T, 10%C) with a binary porogenic solvent consisting of 1-propanol and 1,4-butandiol (7:4, v/v) at a high temperature of 90 °C. The morphology and porous structure of the resulting monoliths were assessed by scanning electron microscope (SEM) and inverse size exclusion chromatography (ISEC), while the column performance was evaluated through the separations of a series of alkylbenzenes in acetonitrile-water (50:50, v/v) eluent. At a normal flow rate of 50 μL/min (corresponding to 1.66 mm/s), the optimized monolithic columns typically exhibited theoretical plate numbers of 6000 plates/10 cm-long column for amylbenzene (k>40), and the pressure drop was always less than 1 MPa/10 cm. The monoliths, which were chemically anchored to the tube inner wall surface using a bifunctional silylation agent, exhibited adequate mechanical strength of up to 12-13 MPa, and were properly operated at 10 times higher flow rate than normal, reducing the separation time to one tenth. The lauryl methacrylate-based monolithic column was applied to a rapid and efficient separation of ten common proteins such as aprotinin, ribonuclease A, insulin, cytochrome c, trypsin, transferrin, conalbumin, myoglobin, β-amylase, and ovalbumin in the precipitation-redissolution mode. Using a linear CH(3)CN gradient elution at a flow rate of 500 μL/min (10-times higher flow rate), 10 proteins were baseline separated within 2 min.     

Size separation of colloidally dispersed nanoparticles using a monolithic capillary column

We developed a method to separate colloidally dispersed nanoparticles on monolithic capillary columns. Silica nanoparticles were eluted according to their sizes, and the plots of the logarithm of the size of nanoparticles against their elution volume showed good linearity (r=0.992) over wide range of sizes. Because of the high porosity of the monolithic column (porosity; 88%), the column's length could be increased without clogging of the dispersed samples and the pressure in a long column (500 mm × 0.2 mm i.d.) was low, with a value of 5.8 MPa at a flow rate of 1 μL/min. We demonstrate that this method using monolithic capillary columns could be used as a powerful tool for size separation of nanometer-size materials, which will open a new pathway to quality control of nanomaterials in nanotechnology applications.     

十八烷基键合硅胶整体柱的制备及其色谱性能评价

选用十八烷基二甲基氯硅烷作为硅烷化试剂,制备十八烷基反相键合硅胶整体柱,并用元素分析进行了表征。以苯、甲苯、联苯、萘、菲混合物作为测试溶质,在以甲醇和水为二元流动相的反相色谱条件下评价了该键合整体柱的色谱性能,考察了该整体柱适用的pH范围,以及柱压降、柱效与流速的关系。结果表明,该硅胶整体柱键合效果良好,具有较好的反相色谱性能,且在pH 2~8之间稳定性好,柱压降、柱效受流速影响较小,对5种心血管系统用药可以达到快速、有效的分离。     

Development of an on-line immobilized-enzyme reversed-phase HPLC method for protein digestion and peptide separation

This paper describes use of a novel glass bead-based immobilized-enzyme micro column for simple and swift on-line protein digestion then peptide separation by reversed-phase HPLC. The inexpensive and easily made immobilized-enzyme micro column was prepared from aminopropyl controlled-pore glass that was reacted first with glutaraldehyde then with trypsin in the presence of phosphate buffer. Tryptic digestion of bovine serum albumin (BSA) was achieved simply by passing pretreated protein solution through the laboratory made immobilized-trypsin column; the tryptic fragments were then separated by reversed-phase HPLC. The peptide separation was found to be identical to separation of a sample which had undergone conventional enzymatic protein digestion in solution. Digestion of BSA by the immobilized-trypsin column decreased with increasing flow rate of the solution through the column, and 1.0 μL min⁻¹ was found to be the optimum flow rate for on-line protein digestion with our system. It was also found that the sample required pretreatment with urea before injection, because of a change in the properties of the protein in the presence of urea, and the immobilized-trypsin column lost its function in the presence of acetonitrile. This on-line proteomics system enables simple and rapid protein digestion and was successfully applied to partially micro two-dimensional (2D) chromatographic separation of proteins.     

A novel silica-based column packing for reversed-phase HPLC of basic compounds

Summary A novel bonded phase for reversed-phase HPLC was synthesized in two steps. Octylamine was first reacted with β-(3,4-epoxycyclohexyl)ethyltrimethoxysilane (β-ECTS) and then the intermediate product was coupled onto porous silica. The prepared packing was characterized by elemental analysis, solid-state¹³C NMR and Fourier transform infrared (FT-IR). Chromatographic evaluations were carried out by using a mixture of organic compounds including acidic, basic and neutral analytes and methanol-water as binary mobile phase. The results showed that the stationary phase has excellent chromatographic properties and is resistant to hydrolysis between pH=2≈8. It can be used efficiently for the separation of basic compounds.     

Optimization of St John's Wort flavonoid separation by reversed phase liquid chromatography on a silica-based monolithic column

Summary An optimization procedure for the separation of flavonoids from St John's Wort by reversed-phase high-performance liquid chromatography on monolithic stationary phase is described. Three-component mobile phase systems are studied using experimental design methodology. The starting experimental domain is a triangle, each vertex of which is a pure component. From preliminary isocratic experiments, truncations in the domain are performed leading to a quadrilateral shape working domain with no symmetry. To cope with both separation and analysis time, desirability functions are used. Optimal conditions are finally given by binary systems and the four flavonoids are separated in less than seven minutes.     

Preparation of methacrylate-based anion-exchange monolithic microbore column for chromatographic separation of DNA fragments and oligonucleotides

In this paper, we report on the preparation of a microbore-scale (1 mm i.d.) anion-exchange monolithic column suitable not only for analytical purposes but also for potentially preparative applications. In order to meet the conflicting requirements of high permeability and good mechanical strength, the following two-step procedure was applied. First, an epoxy-containing monolith was synthesized by in situ copolymerization of glycidyl methacrylate (GMA) and ethylene dimethacrylate (EDMA) within the confines of a silicosteel tubing of 1.02 mm i.d. and 1/16″ o.d. in the presence of a ternary porogenic mixture of 1-propanol, 1,4-butanediol, and water. The monolithic matrix was subsequently converted into weak anion-exchanger via the ring-opening reaction of epoxy group with diethyl amine. The dynamic binding capacity was 21.4 mg mL⁻¹ for bovine serum albumin (BSA) at 10% breakthrough. The morphology and porous structure of this monolith were assessed by scanning electron microscope (SEM) and inverse size exclusion chromatography (ISEC). To optimize the separation efficiency, the effects of various chromatographic parameters upon the separation of DNA fragments were investigated. The resulting monolithic anion exchanger demonstrated good potential for the separation of both single- and double-stranded DNA molecules using a gradient elution with NaCl in Tris–HCl buffer (20 mM). Oligodeoxythymidylic acids (dT₁₂–dT₁₈) were successfully resolved at pH 8, while the fragments of 20 bp DNA ladder, 100 bp DNA ladder, and pBR322-HaeIII digest were efficiently separated at pH 9.     

Ionic liquids monolithic columns for protein separation in capillary electrochromatography

A series of ionic liquids (ILs) monolithic capillary columns based on 1-vinyl-3-octylimidazolium (ViOcIm⁺) were prepared by two approaches (“one-pot” approach and “anion-exchange” approach). The effects of different anions (bromide, Br⁻; tetrafluoroborate, BF₄⁻; hexafluorophosphate, PF₆⁻; and bis-trifluoromethanesulfonylimide, NTf₂⁻) on chromatography performance of all the resulting columns were investigated systematically under capillary electrochromatography (CEC) mode. The results indicated that all these columns could generate a stable reversed electroosmotic flow (EOF) over a wide pH range from 2.0 to 12.0. For the columns prepared by “one-pot” approach, the EOF decreased in the order of ViOcIm⁺Br⁻ > ViOcIm⁺BF₄⁻ > ViOcIm⁺PF₆⁻ > ViOcIm⁺NTf₂⁻ under the same CEC conditions; the ViOcIm⁺Br⁻ based column exhibited highest column efficiencies for the test small molecules; the ViOcIm⁺NTf₂⁻ based column possessed the strongest retention for aromatic hydrocarbons; and baseline separation of four standard proteins was achieved on ViOcIm⁺NTf₂⁻ based column corresponding to the highest column efficiency of 479 000 N m⁻¹ for cytochrome c (Cyt c). These results indicated that the property of ILs based columns could be tuned successfully by changing anions, which gave these columns potential to separate both small molecules and macro biomolecules.     

Development of a gel monolithic column polydimethylsiloxane microfluidic device for rapid electrophoresis separation

A β-cyclodextrin (β-CD)-bonded gel monolithic column polydimethylsiloxane (PDMS) microfluidic device was developed in a simple and feasible way. Before preparation of gel monolithic column in PDMS microchannel, PDMS surface was activated by UV light to create silanol groups, which is an active molecule to covalently bond 3-(trimethoxysilyl)-propyl methacrylate (Bind-Silane) and seal microfluidic device. By the way, Bind-Silane is a bifunctional molecule to link polyacrylamide (PAA) gel and inner wall of PDMS microchannel covalently. Allyl-β-CD was used not only as a multifunctional crosslinker in PAA gel to control the size of the pores, but also as a chiral selector for the enantioseparation. The stability, transferring heat and optical characteristic of the microfluidic device were examined. The separation capability of the gel monolithic column was confirmed by the successful separation of fluorescein isothiocyanate (FITC)-labeled arginine (Arg), glutamine acid (Glu), tryptophan (Try), cysteine (Cysteine) and phenylalanine (Phe) in the PDMS microfluidic device less than 100 s at 36 mm effective separation length. A maximum of 2.06 × 10⁵ theoretical plates was obtained by the potential strength of 490 V/cm. A pair of FITC-labeled dansyl-d,l-threonine (Dns-Thr) was separated absolutely.     

A novel ionic liquid monolithic column and its separation properties in capillary electrochromatography

A novel ionic liquid (IL) monolithic capillary column was successfully prepared by thermal free radical copolymerization of IL (1-vinyl-3-octylimidazolium chloride, ViOcIm⁺Cl⁻) together with lauryl methacrylate (LMA) as the binary functional monomers and ethylene dimethacrylate (EDMA) as the cross-linker in binary porogen. The proportion of monomers, porogens and cross-linker in the polymerization mixture was optimized in detail. The resulting IL-monolithic column could not only generate a stable reversed electroosmotic flow (EOF) in a wide pH range (2.0–12.0), but also effectively eliminate the wall adsorption of the basic analytes. The obtained IL-monolithic columns were examined by scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR). These results indicated that the IL-monolithic capillary column possessed good pore properties, mechanical stability and permeability. The column performance was also evaluated by separating different kinds of compounds, such as alkylbenzenes, thiourea and its analogues, and amino acids. The lowest plate height of ∼6.8 μm was obtained, which corresponded to column efficiency (theoretical plates, N) of ∼147,000 plates m⁻¹ for thiourea. ILs, as a new type of functional monomer, present a promising option in the fabrication of the organic polymer-based monolithic columns in CEC.     

Preparation of a monolithic column for weak cation exchange chromatography and its application in the separation of biopolymers

A procedure for the preparation of a monolithic column for weak cation exchange chromatography was presented. The structure of the monolithic column was evaluated by mercury intrusion. The hydrodynamic and chromatographic properties of the monolithic column--such as back pressures at different flow rates, effects of pH on protein retention, dynamic loading capacity, recovery, and stability--were determined under conditions typical for ion-exchange chromatography. The prepared monolithic column might be used in a relatively broad pH range from 4.0 to 12.0 and exhibited an excellent separation to five proteins at the flow rates of both 1.0 and 8.0 mL/min, respectively. In addition, the prepared column was first used in the purification and simultaneous renaturation of recombinant human interferon gamma (rhIFN-gamma) in the extract solution with 7.0 mol/L guanidine hydrochloride. The purity and specific bioactivity of the purified rhIFN-gamma in only one chromatographic step were obtained to be 93% and 7.8 x 10(7) IU/mg, respectively.     

Chiral separation by （S）-naproxen imprinted monolithic column with mixed functional monomers

Molecularly imprinted polymers (MIPs), using (S)-naproxen as template and the combination of butyl methacrylate (BMA) and MAA (1:1 molar ratio) as functional monomers were synthesized by an in situ polymerization reaction. The rendered monolithic column was evaluated in HPLC mode. The result showed that the monolithic MIPs with the combination of two monomers produced better chiral resolution of rac-naproxen (Rs=1.55) and column efficiencies of imprinted molecules (N=2860 plates/m)than that with pure MAA.     

Electrochromatographic enantioseparation using chiral ligand exchange monolithic sol-gel column

This paper describes the development of a monolithic sol-gel column modified with l-hydroxyproline as a ligand exchange chiral stationary phase. It has been demonstrated that the monolithic chiral stationary phase can be used for the enantioseparation of dansyl amino acids, free amino acids, hydroxy acids, and dipeptides by capillary electrochromatography and micro-liquid chromatography. The recommended mobile phase was acetonitrile/0.50 mM Cu(Ac)₂-50 mM NH₄Ac (7:3) adjusted to pH 6.5. The characteristics of the monolithic column using hydroxyproline as chiral selector in CEC have been discussed.     

Preparation of a capillary isoelectric focusing column with monolithic immobilized pH gradient and its application on protein separation based on an online capillary isoelectric focusing platform

In the presence of methanol and n‐decanol as porogens, a partially filled capillary monolithic column was prepared by in situ reaction of glycidyl methacrylate and poly (ethylene glycol) diacrylate. Then, Pharmalyte 3–10 was immobilized on this column in order to obtain a capillary isoelectric focusing (cIEF) column with monolithic immobilized pH gradient (M‐IPG). In addition, an online self‐built platform for protein separation was established on account of the introduction of a cross‐shaped unit and two short‐off valves. In this platform, a cross‐shaped unit was not only used to join the M‐IPG column and a six‐way injection valve (1.5 μL sample loop), but also to supply a volume pool of anode buffer so that the process of injection, focusing and mobilization of samples could be sequentially performed. The short‐off valve in the tee unit or cross‐shaped unit could be used to control the direction of the fluid flow. Using this online cIEF platform and under the optimized conditions, 7‐proteins mixture could be separated and a good linear correlation between pI values and migration times was obtained by the M‐IPG column. Meanwhile, based on the online cIEF platform, human serum proteins and a mixture of Hb A and Hb A_1c have been successfully resolved with the newly developed M‐IPG column.     

Separation of peptide diastereomers using CEC and a hydrophobic monolithic column

A neutral hydrophobic monolith prepared by radical in situ copolymerization of lauryl methacrylate and ethylene dimethacylate has been evaluated for the CEC separation of diastereomers of small peptides using acidic mobile phases containing ACN as organic modifier. Using an acidic mobile phase, the peptides migrated due to their own electrophoretic mobility. Hydrophobic interactions with the stationary phase contributed to the separation. Peptide mobility and resolution increased with increasing the ACN content. Retention times increased with the pH of the mobile phase. Peak resolution increased with buffer pH and concentration. Di‐ and tripeptides composed only of L ‐configured amino acids migrated faster than peptides containing D ‐amino acids. A mixture of isomeric Asp tripeptides that could not be completely resolved by either CZE or HPLC as well as the 24mer peptides tetracosactide and ¹⁶[D ‐Lys]‐tetracosactide could also be separated by CEC on the hydrophobic monolith.     

Fabrication of a poly(styrene-octadecene-divinylbenzene) monolithic column and its comparison with a poly(styrene-divinylbenzene) monolithic column for the separation of proteins

In this paper, a poly(styrene-octadecene-divinylbenzene) (PS-OD-DVB) monolithic column was prepared in one step by introducing a C18 carbon chain as monomer. N,N-Dimethylformamide and decanol served as porogens to make a homogeneous polymerization mixture in a fused silica capillary (320 microm inner diameter). Its physical and chromatographic properties were compared with those of poly(styrene-divinylbenzene) (PS-DVB) monolithic column, which was also fabricated by in-situ polymerization in a fused silica capillary with the same inner diameter. Six standard proteins were used to evaluate the columns and their potential application for the separation of human hemoglobin was also discussed. It was shown that the PS-OD-DVB and PS-DVB monoliths appeared to have similar efficiency for rapid separation of six proteins within 3.5 min. The PS-OD-DVB monolith was found to have higher loading capacity and higher resolution for the separation of alpha and beta chains of hemoglobin because of the introduction of C18 carbon chains, and shows great potential for the separation of bio-macromolecules.     

Development of a new high performance low pressure chromatographic system using a multisyringe burette coupled to a chromatographic monolithic column

A novel combination of high performance low pressure chromatography with multisyringe flow injection analysis is presented. This system comprises a multisyringe module, three low pressure solenoid valves, a monolithic Chromolith Flash RP-18e column and a diode array spectrophotometer. UV detection is carried out at 250 nm. AutoAnalysis software is used for instrumental control and automated data collection. The results obtained with multisyringe liquid chromatography (MSC) were compared with those obtained with a HPLC system using similar conditions. The chromatographic parameters were calculated from a mixture of anthracene and thiourea using a mobile phase containing acetonitrile-water (60:40) at a flow rate of 2 ml min⁻¹. The proposed MSC system has been successfully applied to the determination of amoxicillin, ampicillin and cephalexin using a mobile phase of sodium acetate buffer (pH 6.2, 0.1 mol l⁻¹)-methanol (90:10) at a flow rate of 2 ml min⁻¹. The low-cost, flexibility and simplicity of MSC should be highlighted.     

Enantiomer separation by reversed-phase liquid chromatography with novel hydrophobic phases composed of chiral cationic surfactants

This paper describes enantiomer separation using four kinds of chiral stationary phases (CSPs) where quaternary ammonium surfactants containing L-valine diamide moieties into long alkyl chains were bound to silicagel supports by reversed phase liquid chromatography. Our aim was to examine hydrogen bonding association of the chiral moiety in hydrophobic phase brought about by aggregation of the micelle-forming surfactants on the surface. The following CSPs were thus derived from the vinyl-terminated chiral surfactants via hydrosilylation: CSP 1 from N-[3-(10-undecenoyl-L-valylamino)propyl]-N,N,N-trimethylammonium bromide, CSP 2 from N-[6-(10-undecenoyl-L-valylamino)hexyl]-N,N,N-trimethyl-ammonium bromide, CSP 3 from N-[3-(10-undecenoyl-L-valylamino)propyl]-N-octadecanyl-N,N-dimethyl-ammonium bromide and CSP 4 from N-[6-(10-undecenoyl-L-valylamino)hexyl]-N-octadecanyl-N,N-dimethylammonium bromide. The degree of hydrophobicity in the interfacial phase was observed by measuring pyrene fluorescence in aqueous media including an organic modifier. Retention of racemic N-acylleucine isopropyl esters was highest in CSP 4, followed by 3, 2, and 1. Largest alpha values toward enantiomer separation were observed for CSP 4 where the chiral moieties were kept through a hexamethylene unit apart from the polar head groups and to which another long alkyl chain was attached, as compared with those for CSP 4. In CSP 4, the chiral moiety to interact with enantiomeric solutes should be buried into the interfacial phase deeply in more extent than CSP 3. In a similar manner, CSP 2 has more effective for enantiomer separation than CSP 1. The interfacial phase of these CSPs was easily exposed to the bulk phase because of the affinity between the bulk phase and the polar head groups as well as their electrostatic repulsion. However, degree of the enantiomer separation can be controlled by the depth of the chiral moiety in the hydrophobic interfacial phase.