Nuclear magnetic resonance studies for the chiral recognition of the novel chiral stationary phase derived from 18-crown-6 tetracarboxylic acid

Enantioselectivities observed in high-performance liquid chromatography (HPLC) with the novel chiral stationary phase (CSP-18C6I) derived from (+)-18-crown-6 tetracarboxylic acid (18C6H₄) were investigated by using nuclear magnetic resonance (NMR) spectrometry. The elution orders in CSP-18C6I, that is, the S-enantiomer of 1-(1-naphthyl)ethylamine (1-NEA) and the

Full-size image

-enantiomer (S-form) of alanine-β-naphthylamide (Ala-β-NA) eluted prior to each corresponding enantiomer, were successfully explained on the basis of the apparent binding constants (K_a) of the enantiomers to the CSP moiety which were calculated from ¹H-NMR experiments. Detailed HPLC and NMR studies for the chiral recognition of racemic amino compounds with 18C6H₄ hosts showed that ¹H-NMR spectrometry is a useful technique for the investigation of the chiral recognition mechanism in HPLC. Additionally, it was found 18C6H₄ can be recommended as a useful chiral shift reagent for the enantiomeric excess determination by ¹H-NMR.     

Formation d''etats triplets du biacetyle dans sa reaction en phase gazeuse avec un plasma froid d''azote

The behaviour of the biacetyl molecule (BA) in a cold plasma, obtained by extraction of reactive species from a nitrogen plasma generated in a microwave discharge, is discussed. When the partial pressures of nitrogen and biacetyl are approximately equal (p_N2 ≈ 0.60 Torr, p_BA ≈ 0.55 Torr), the emission of the ³A_u---¹A_g transition of biacetyl is observed with a vibrational structure. On reaction of biacetyl with nitrogen cold plasma preferentially enriched in N₂(A³Σ⁺_u), an enhancement of the emission intensity of the phosphorescence of biacetyl is observed. The initiator of this transition is the triplet state BA(³B_u) which originates from an isoenergetic transfer from N₂(A³Σ⁺_u) according to the overall mechanism

Full-size image

     

Sulfur speciation by capillary electrophoresis with indirect spectrophotometric detection: In search of a suitable carrier electrolyte to maximize sensitivity

Various probes have been evaluated as alternative ions to chromate, which is most frequently used in the analysis of small inorganic anions by capillary electrophoresis with indirect UV detection. Sulfur species (S₂O₃²⁻, SO₄²⁻, S₄O₆²⁻, S(−II)) have been determined. The optimization of the method was particularly focused on S(−II) since this species rapidly yields S₂O₃²⁻ and SO₄²⁻ in the presence of oxidizing agents. Therefore, it could not be analysed by capillary electrophoresis with chromate as the background electrolyte. The alternative probe ions all contain aromatic rings (benzene or naphthalene) to provide the intrinsic background absorbance for indirect detection. They are all fully ionized at the pH chosen for this application (TRIS buffer, pH=8) and the range of their mobilities is large enough to suit the analytes mobilities. They have no oxidizing properties. Transfer ratios have been determined experimentally and compared to calculated values derived from the Kohlrausch regulation function. All experimental values were lower than expected from the calculations, which proves the limitations of the Kohlrausch theory concerning the configuration (electrolyte/analyte) of this study. However, maximizing (z_A/z_E)·ε_E (with z_A and z_E being the charges of the analyte and the probe, respectively, and ε_E the molar absorptivity of the probe) and keeping the mobility of the probe close to those of the analytes will give a good hint for the choice of the most suitable UV-absorbing probe. Pyromellitate and naphthalenetrisulfonate, the mobilities of which are close to that of S(−II), give the best sensitivity for this species, with good resolution and sensitivity for all other species.     

A study of the UV—visible absorption spectrum of molecular chlorine

The UV—visible absorption spectrum of molecular chlorine at 298 K was investigated in the wavelength range 200–550 nm with a spectral resolution of 0.2 nm. Except for minor discrepancies, the absorption cross-sections are in agreement with those found in the literature. In the region 250λ-550 nm, the Cl₂ spectrum can be adequately described by a semi-empirical function of the wavelength A (in vacuum) and temperature T

Full-size image

where TANH=tanh(hcx559.751 cm⁻¹/2kT). The absorption of solar radiation by the weak continuum around λ_max=406.5 nm contributes 9% or more of the photodissociation of molecular chlorine in the atmosphere, but the banded Cl₂ features (λ 479 nm) are of negligible atmospheric significance.     

Influence of solvents on the insertion of methacrolein into zirconacyclopropenes

The reaction of Cp₂Zr(L)(η²-Me₃SiC₂) (L = THF, py) with equimolar amounts of H₂C = CMe-CHO at room temperature depends strongly on the ligands L and the solvents that are used. With L = THF, in the THF solution the insertion product

Full-size image

1 was isolated, whereas by conducting the reaction in n-hexane solution an alkyne substitution with 1,4-coordination of the methacrolein takes place and the binuclear complex [

Full-size image

2 was obtained. In conttrast, with L = py (a stronger ligand) only a 1:1 ratio of 1 and 2 was observed in both THF and in n-hexane. At 50°C complex 1 was converted into 2 and the alkyne was eliminated quantitatively.

Complexes 1 and 2 were characterized by IR and NMR spectroscopical measurements and 1 by an additional X-ray structure determination.     

Enantioselective organic syntheses using chiral transition metal complexes V. (2S,3S)-Bis(dibenzophospholyl)butane, a rigid (S,S)-CHIRAPHOS analog

The P–Ph cleavage of phenyldibenzophosphole (1) with lithium in THF gives lithium dibenzophospholide (2). Reaction of 2 with ethyleneglycol ditosylate produces the known chelate ligand 1,2-bis(dibenzophospholyl)ethane (3) in good yield. Similarly, 2 and (2R,3R)-butanediol ditosylate give the new chiral chelate ligand (2S,3S)-bis(dibenzophospholyl)butane (4). Ligand exchange of [CpRu(PPh₃)₂Cl] with 3 or 4 yields the halfsandwich complexes [CpRu(C₁₂H₈PC₂H₄PC₁₂H₈)Cl] (5) and [CpRu((S,S)-C₁₂H₈PCHMeCHMePC₁₂H₈)Cl] (6). Complex 6 was characterized crystallographically (monoclinic, space group P2₁ (no. 4), a=820.6(4), b=1501.0(3), c=1172.8(6) pm, β=108.87(2)°, V=1.367(1)×10⁹ pm³, Z=2). The most conspicuous feature of the structure of 6 is the perfect coplanarity of the two dibenzophosphole moieties imposed by their steric interaction with the Cp ligand. Complex 6 and the thiophene complex [CpRu((S,S)-C₁₂H₈PCHMeCHMePC₁₂H₈)(SC₄H₄)]BF₄ (7) derived therefrom are remarkably unreactive with regard to ligand substitutions. A possible explanation is the lack of intramolecular

Full-size image

–C stabilization en route to the transition state of ligand substitution. The enantiomeric purity of 6 and 7 could nevertheless be demonstrated by conversion to diastereomerically pure [CpRu((S,S)-C₁₂H₈PCHMeCHMePC₁₂H₈)((S)-CNCHMePh)]BF₄ (8).     

Critical validation of a new simpler approach to estimate aqueous pKa of drugs sparingly soluble in water

A simple linear approach to estimate the aqueous pK_a of compounds sparingly soluble in water, mainly drugs, from solely one pK_a value determined in any methanol/water mixture is evaluated. The parameters (slope and intercept) of the linear relationships are related to the solvent composition and can be easily calculated according to the acidic or basic functional group of the compound. The method has been tested using the available literature data for phenols, aliphatic carboxylic acids, benzoic acid derivatives, both ortho and non-ortho substituted, amines and imidazole derivatives. The study involves the whole range of solvent composition and about one hundred compounds which show a wide variety of aqueous pK_a, from 1.3 to 12.4. The differences between calculated and previously published aqueous pK_a values are less of 0.2 pK units. Consistent values are obtained whatever the composition of methanol/water mixture employed in the experimental measurements. The results support the usefulness of the tested method as a very simple approach to get reliable aqueous pK_a values for sparingly soluble drugs.     

Oxygen potential and phase equilibria in the Te-Sb2O3-Sb2O4 pseudoternary part of the Sb-Te-O system at elevated temperatures

Employing the electrochemical cells with the solid oxide electrolyte

Kanthal + Re, Te(l), TeO₂(s)O⁻² air, Pt

Pt + Re, Sb₂O₃(s), Sb₂O₄(s)O⁻² air, Pt

Pt + Re, Sb₂O₃(s), Sb₂O₄(s), Te(l)O⁻² air, Pt

the equilibrium oxygen potential in the pseudobinary Te-TeO₂, Sb₂O₃-Sb₂O₄ and in the Sb₂O₃-Sb₂O₄-Te pseudoternary systems was determined in the temperature range 700-1173 K. In addition, the pseudobinary sections Sb₂O₃-Te, Sb₂O₃-Sb₂O₄ (1:1)-Te and Sb₂O₄-Te were examined by DTA in the temperature range 500-1300 K. Using these results the evolution of the pseudoternary system with temperature can be suggested. It was found that, at 718 K, a ternary eutectic with a composition close to pure Te appears in the system. At a higher temperature, 920 K, another liquid phase is formed, which is characteristic of the ternary four-phase equilibrium L₂ + Sb₂O₄(s) + Sb₂O₃(s) = L₁.     

The intermolecular potential function of Smith–Thakkar type for C60

The intermolecular potential function of Smith–Thakkar type for C₆₀ has been proposed, and its expression is as follows

The unit of u(r) is J/mol, r is the distance between two C₆₀ molecules center and the unit is nm. Some properties of C₆₀ in the gas and crystal have been studied using the interaction potential of Smith–Thakkar type, such as stability of C₆₀ crystals, virial coefficient and lattice dynamics.     

Some properties of generalized secant integrals: extended definition and recurrence relations

Line sources with slab shields represent typical source–shield configurations in gamma-ray attenuation problems. Such shielding problems often lead to the generalized secant integrals of the form

Recently, the author has developed rapidly convergent infinite-series representation of generalized secant integrals involving incomplete gamma functions. The validity of this representation was established for zero and positive values of the integral parameter a (a0). In this paper the definition is extended to include negative real a values. It is demonstrated that the introduced series representation is still valid. In addition, general recurrence relations are established that allow precise calculation of the integral for negative a values.     

Further results on a family of generalized radiation integrals

In this paper we continue the investigation by Kalla et al. (1991) of the family of generalized radiation integrals defined by

, where Re(γ) > Re(β) > 0; −1 < λ < 2 − 2μ > −1; μ > −1; p, a, b > 0; 0 < a b < ∞. Several recurr ence relations are presented. By differentiation of these integrals with respect to the parameters λ and μ we obtain also various integrals that include the logarithmic function in the integrand. Finally, we propose an algorithm for numerical evaluation of the generalized radiation integrals and illustrate it by tables of their values computed for selected values of the parameters.     

A new oxamato-bridged heterotrinuclear NiCuNi complex with irregular spin state structure: Synthesis, spectroscopy, crystal structure and magnetism

A new oxamato-bridged Ni^IICu^IINi^II species, [Ni(tacn)(H₂O)]₂[μ-Cu(pba)](ClO₄)₂·6H₂O 1, (tacn=1,4,7-triazacyclononane; pba=1,3-propylenebis(oxamato)) has been synthesized and structurally as well as magnetically characterized. Complex 1 has a discrete trinuclear Ni^IICu^IINi^II structure: Two nickel(II) ions are bridged by [Cu(pba)]²⁻ anion, macrocyclic ligand tacn works as terminal ligand of the nickel(II) center. The magnetic data of compound 1 was analyzed by means of

leading to g_Cu=2.19, g_Ni=2.18, J=−112.8 cm⁻¹, D=±4.31 cm⁻¹. The parameters are compared with the similar complexes and the irregular spin state structure of complex 1 is also described here.     

Photochemistry of perfluoroacyl halides in the presence of O2 and CO

Photolyses of CF₃C(O)X and C₂F₅C(O)X (X=Cl, F) at 254 nm in the presence of O₂ yield the perfluorinated radicals C₂F₅O (C₂) and CF₃O (C₁), respectively. The C₂ radicals decompose to give CF₃ radicals:

C₂F₅O→CF₃+CF₂O

which, in turn, react with O₂ leading to the formation of C₁ radicals. When in addition to O₂, CO is present, the C₁ radicals react with it leading to its catalytic oxidation to CO₂. The trioxide CF₃OC(O)O₃C(O)OCF₃ was observed following the photolysis of all four halides in the presence of O₂ and CO.

The other radical partners coming from the initial step in the photolysis (XC(O)) as well as the products of their reaction with O₂ (XC(O)O_y, y=1, 2) do not react with CO but when X=F they lead to the formation of a new stable peroxy molecule with the formula CF₃OC(O)O₂C(O)F. Some of the properties of this new molecule, its stability and its IR features are presented in this work.     

Rapid measurement of fish freshness indices by an amperometric flow-injection system with a 16-way switching valve and immobilized enzyme reactors

A novel flow-injection system is proposed for the rapid measurement of the fish freshness indices K₁ and K₂: K₁=[([HxR+[Hx])×100/([IMP]+[HxR]+[Hx])] and K₂=[[Hx]×100/([HxR]+[Hx])], where [IMP], [HxR] and [Hx] are inosine-5′-monophosphate, inosine and hypoxanthine concentrations, respectively. For the estimation of index K₁, 5′-nucleotidase immobilized reactor and nucleoside phosphorylase (NP)/xanthine oxidase (XO) coimmobilized reactor were incorporated in series in the flow-injection line made up by a 16-way switching valve with two sample loops. For the estimation of index K₂, NP and XO immobilized reactors were also incorporated in the similar flow-line. Two sample portions passed through the flow-line with different residence times so that two peaks were obtained. The first and second peaks obtained in the K₁-determining system corresponded to the total of HxR and Hx and the total of Hx, HxR and IMP, respectively. Similarly, the first and second peaks obtained in the K₂-determining system corresponded to Hx and the total of Hx and HxR, respectively. Therefore, the indices K₁ and K₂ can be estimated by

where i₁ and i₂ present the peak current of the first and second peaks, respectively, and f the ratio of the peak currents of the first and second peaks for a Hx standard solution. A sea bream was selected as a model fish and it was stored at 4 °C after death. A good correlation was found between the index K₁ and the storage time over a period of 400 h, with a correlation coefficient of 0.992, but no correlation between the index K₂ and the storage time. The measurements could be performed at a rate of 22 samples per hour with satisfactory precision (0.6–1.2% R.S.D.), without calibration for each species, accurate weighing of fish meat and any interferences in fish meat.     

Parachors of liquid/vapor systems: A set of critical amplitudes

In light of the available experimental data and of our current understanding of liquid–vapor critical phenomena, we examine the values of the parachors and of the parachor exponent, which are commonly used to estimate surface tension from the density difference between coexisting liquid and vapor phases. This is a controversial issue, as values for the parachor exponent ranging from 3.5 to 4 have been proposed in the literature. The parachor exponent and parachors can be viewed as a critical exponent and critical amplitudes, respectively. The Ising value, equal to 3.88, should be observed for the exponent “close enough” to the liquid/vapor critical point, i.e., for “low enough” tensions and densities. However, a review of experimental data for several fluids suggests an effective value in the range of 3.6, in line with the effective values observed for the exponents that describe the vanishing of the density difference and capillary length with the distance to the critical temperature. In fact, the asymptotic Ising regime is not reached experimentally, as confirmed by an estimation of the parachors very near the critical point. Those (Ising) parachors can be inferred from other critical amplitudes corresponding to bulk properties by using two-scale factor universality. Their values exceed those deduced from off-critical tension and density data by more than 10%, corresponding to surface tension differences larger than 50%. We argue that effective parachors (i.e., corresponding to an exponent in the range of 3.6) can be utilized in combination with two-scale-factor universality for determining the critical behavior of fluid systems in an extended range around their liquid/vapor critical point.     

Chelating diphos ligands with inorganic backbones. Crystal structure of [PtCl2{(PPh2O)2SiPh2}]

The metallo-phosphaalkenes (η⁵-C₅Me₅)(CO)₂FeP=C(R)(SiMe₃) (Ia: R = SiMe₃, Ib: R = Ph) and MeO₂C---CC---CO₂Me undergo a dipolar [3+2]-cycloaddition to afford the metallo-heterocycles [(η⁵-C₅Me₅)(CO)

Full-size image

=C(R)SiMe₃] (IIIa,b) with exocyclic P=C double bonds.     

Chemistry of polyfunctional molecules-123. Reactions of BiBr3, SbI3 and AsI3 with LiN(PPh2)2; X-ray structure of a cyclophosphazene salt containing arsenic(I)

BiBr₃ or SbI₃ react at 20°C with LiN(PPh₂)₂ (1) to give elementary Bi or Sb and the P---P coupled phosphazene ligand Ph₂P---N=PPh₂---PPh₂=N---PPh₂ (2). The reaction of AsI₃ with 1 at room temperature formed yellow needles of the eight-membered heterocycle (3), whereas AsI₃ interacted at 80°C with 1 in the molar ratio of 1:3 to give elementary arsenic and 2. Treatment of AsI₃ and 1 at 20°C in a 1:2 stoichiometry yielded the seven-membered, cyclic arsenium(I) salt

Full-size image

I·4THF (5·4THF), which was characterized by elemental analysis, conductivity, mass, IR and NMR spectroscopy and single-crystal X-ray structural analysis.     

Dipole polarizability pseudospectra and C6 dispersion coefficients for H2–H2

Pseudostate decomposition of static dipole polarizabilities for ground state H₂⁺ from a Givens-Householder diagonalization of the excitation operator (

Full-size image

H" height="17" width="20">₀−E₀) over an N-term basis of appropriate symmetry allows for a rapidly convergent evaluation of C₆ dispersion coefficients for H₂⁺–H₂⁺. 27-term pseudospectra of hypergeneralized James functions with a 30-term GGJ⁺ unperturbed wavefunction with an optimized scale factor δ=0.918 at R=2₀ give C₆ and γ₆ values that are accurate to no less than nine significant figures.     

Isolation of a diketone species that is allylically bound to tungsten, and its relationship to a tungsten η-ketone complex

The diketone complex [W(CO)₂(η-C₅H₄Me){η³-

Full-size image

(H)---C(O)---C₅Me₅}] (3) was isolated from the reaction of PhC₂H with a mixture of [Ni(CO)I(η-C₅Me₅)] and [W(CO)₃(η-C₅H₄Me)]⁻. Complex 3 contains an organic diketone fragment that is bound in a π-allyl fashion to a tungsten atom. It was fully characterized by standard spectroscopic techniques and by a single-crystal X-ray diffraction study. The relationship of complex 3 to a structurally characterized cyclopentadienyl tungsten η²-ketone species 1, and the likelihood that 3 and the methylcyclopentadienyl analog of 1 share common intermediates, are discussed.     

The solubility of an hydroxyaluminosilicate

Hydroxyaluminosilicates (HAS) are critical secondary mineral phases in the biogeochemical cycle of aluminium. They are formed from the reaction of silicic acid (Si(OH)₄) with an aluminium hydroxide template and act as a geochemical control of the biological availability of Al. There are two main forms of HAS which we have called HAS_A and HAS_B and which of these will predominate will depend upon the Si(OH)₄ to Al ratio in any one environment. In all but the most heavily weathered environments or those undergoing a progressive acidification Si(OH)₄ will be present in significant excess to Al and HAS_B will be the dominant secondary mineral phase. We have tried to determine the solubility of HAS_B(s) so that its contribution to Al solubility control might be compared with other secondary minerals such as Al(OH)_3(gibbsite). In preliminary experiments, the dissolution of HAS_B(s) was found to be non-congruent with almost no Al being released during 18 months ageing. We then demonstrated that HAS_B(s) was significantly less soluble than Al(OH)_3(s) prepared under identical experimental conditions. We have used this information to describe a solubility expression for HAS_B(s) at a predefined quasi-equibrium and to calculate a solubility constant.

K^*Al₂Si₂O₅(OH)₄=[Al₂O⁴⁺][SiO₂]²[OH^-]⁴