微波辅助合成石墨烯/氧化镍复合材料及其表征

本文通过微波辅助的方法,快速而有效地在热膨胀石墨烯(RG)的缺陷上原位合成氧化镍纳米颗粒,形成石墨烯/氧化镍复合材料(RG/NiO)。利用X-射线衍射(XRD),拉曼光谱(Raman),傅里叶变换红外(FTIR),扫描电镜(SEM),透射电镜(TEM),热重-差热(TGA-DSC)对所制备样品的结构、形貌和NiO含量在复合材料中的含量进行表征。结果表明,热膨胀石墨烯层数约7~8层,层间距约为0.35nm,缺陷多,在水热和微波处理后抗氧化性明显变差。复合材料中氧化镍颗粒平均粒径为25nm,均匀而密集地分散在石墨烯平面上,同时在复合材料中的含量为19.8%。     

微波辅助合成石墨烯/氧化镍复合材料及其表征

本文通过微波辅助的方法,快速而有效地在热膨胀石墨烯(RG)的缺陷上原位合成氧化镍纳米颗粒,形成石墨烯/氧化镍复合材料(RG/NiO)。利用X-射线衍射(XRD),拉曼光谱(Raman),傅里叶变换红外(FTIR),扫描电镜(SEM),透射电镜(TEM),热重-差热(TGA-DSC)对所制备样品的结构、形貌和NiO在复合材料中的含量进行表征。结果表明,热膨胀石墨烯层数约7~8层,层间距约为0.35 nm,缺陷多,在水热和微波处理后抗氧化性明显变差。复合材料中氧化镍颗粒平均粒径为25 nm,均匀而密集地分散在石墨烯平面上,同时在复合材料中的含量为19.8%。     

石墨烯/银复合薄膜的制备及表征

采用静电自组装技术,通过交替沉积聚(二烯丙基二甲基氯化铵)(PDDA)(或硝酸银)和氧化石墨烯,制备氧化石墨烯/PDDA薄膜和氧化石墨烯/硝酸银复合薄膜。然后在600℃下通入氩气和氢气进行气氛还原得到石墨烯薄膜和石墨烯/银复合薄膜。采用AFM、SEM、XPS、UV-Vis以及四探针电阻仪等对薄膜结构及性质进行表征。结果表明,通过静电自组装法可以获得生长均匀的薄膜。对比于相同自组装次数的石墨烯薄膜,石墨烯/银复合薄膜具有更好的透光性和更低的薄膜方块电阻。在λ=500 nm时,四层石墨烯/银复合薄膜的透过率为85%左右,而石墨烯薄膜的透过率为72%左右;石墨烯薄膜的方阻为161.39 kΩ.□-1,而石墨烯/银复合薄膜的方阻为99.11 kΩ.□-1。     

石墨烯/还原氧化石墨烯/聚苯胺复合材料的制备及在超级电容器中的应用

本研究以低成本、易规模化的亲水性石墨烯/氧化石墨烯为前驱体,通过原位聚合的方法制备石墨烯/氧化石墨烯/聚苯胺复合材料,经过化学还原后制备得到石墨烯/还原氧化石墨烯/聚苯胺复合材料.采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)和傅里叶红外变化光谱仪(FT-IR)对制备的材料进行了结构和形貌的表征.运用循环伏安法...     

一步法制备纳米铂/石墨烯及电催化甲醇的交流阻抗和扩散系数测定

采用绿色还原剂抗坏血酸,一步法制备纳米铂/石墨烯。对其进行X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)形貌结构表征,铂纳米粒子均匀分散于纳米石墨烯片层褶皱间,有效减少了团聚现象。运用循环伏安法(CV)和计时电流法(CA)研究纳米铂/石墨烯对甲醇电催化氧化活性和稳定性,通过交流阻抗(EIS)定量测定,发现铂/石墨烯比铂具有更优异的电荷传输性能,电荷转移阻抗下降了34.8%。计时电量法(CC)测定得到甲醇在铂/石墨烯电极的表面扩散系数为1.42×10~(-9) cm~2·s~(-1)。与铂纳米粒子相比,纳米铂/石墨烯对甲醇电催化氧化具有更高的活性和稳定性,显著提高电极催化活性表面积和电荷传输及转移性能。     

石墨烯/铂复合材料的制备及电化学性能研究

采用Hummers法制备氧化石墨,再超声分散于去离子水中形成稳定的氧化石墨分散液。分散液与氯铂酸溶液混合后,氧化石墨烯还原氯铂酸产生大量铂纳米粒子,铂粒子被牢固地锚在氧化石墨烯片上,最后将所得到的氧化石墨烯/铂复合物置于管式炉中在Ar/H2气氛中于800℃下热裂解制备出石墨烯/铂复合材料。形貌与纳米结构分析表明,氧化石墨已被彻底还原成石墨烯,铂纳米粒子均匀分散在褶皱的石墨烯纳米片间。电化学阻抗研究进一步揭示复合材料的电子转移阻抗明显小于石墨烯,呈示铂纳米粒子掺入石墨烯片层大大改善了导电性。石墨烯/铂复合材料应用于对苯二酚的电化学检测,检出限达1.6×10-7mol.L-1,这说明该材料具有优异的电催化性能。     

氧化石墨烯的可控还原及结构表征

采用氧化还原法, 通过控制还原时间制备了不同还原程度的石墨烯; 用红外光谱、 紫外光谱、 拉曼光谱、 X射线衍射、 热重分析、 电导率测量等多种手段系统研究了不同还原程度石墨烯的结构与性能; 采用透射电子显微镜、 扫描电子显微镜和原子力显微镜比较了氧化石墨烯和石墨烯的形貌. 结果表明, 随着还原程度的增加, 石墨烯中含氧基团减少, 紫外吸收峰逐渐红移, D带与G带的强度比增加, 热稳定性和导电性提高. 微观结构表征说明石墨烯比氧化石墨烯片的厚度增加, 褶皱增多.     

中空铂镍/三维石墨烯催化剂的制备及电化学性能

采用超声辅助化学法和凝胶化反应相结合的工艺制备了中空铂镍/三维石墨烯电催化剂(PtNi/GCM). 利用X射线粉末衍射仪(XRD)、 X射线光电子能谱仪(XPS)、 扫描电子显微镜(SEM)和透射电子显微镜(TEM)等表征了催化剂的结构、 组成及微观形貌. 采用电化学工作站和旋转圆盘电极测试了催化剂对氧还原反应的电催化活性和稳定性. 结果表明, 铂和镍前驱体的不同摩尔比对催化剂的多孔结构、 粒子形貌和分散状态影响较大, 当摩尔比为1∶1时, 所得三维石墨烯中纳米粒子尺寸均一、 分散均匀. 该PtNi/GCM催化剂对氧还原具有优异的催化活性, 在半波电势(0.494 V)处, 质量比活性和面积比活性分别为1.09 A/mgPt和1.02 mA/cm², 是商业Pt/C的5.4倍和3.5倍(0.20 A/mg_Pt, 0.29 mA/cm²). 同时, 该催化剂还具有很好的稳定性, 循环30000周后, 半波电势降低值是商业铂炭的43.6%.     

铂/石墨烯氧还原电催化剂的共还原法制备及表征

使用硼氢化钠共还原法制备40% (w)铂/石墨烯电催化剂用于氧还原反应. 通过循环伏安测试发现, 这种方法制备所得铂/石墨烯催化剂对氧还原反应活性较铂/碳催化剂差, 但稳定性有所提高. 在稳定性测试中,铂/石墨烯电催化性能衰减为50%, 较铂/碳(79%)好. X射线衍射(XRD)和透射电子显微镜(TEM)表征发现在铂/石墨烯催化剂中两者存在明显交互作用, 这可能是阻止石墨烯再堆垛和防止铂颗粒团聚的主要原因. 通过对单电池性能测试也发现铂/石墨烯催化剂更有利于电池长期稳定.     

水热合成二硫化钨/石墨烯复合材料及其氧还原性能

以六氯化钨、硫代乙酰胺、氧化石墨烯为原料,采用一步水热法合成了二维的二硫化钨/石墨烯(WS₂/RGO)复合材料。水热合成的WS₂/RGO具有薄层的二维结构,且由于石墨烯的存在,WS₂以较少的层数形成薄片状生长在石墨烯的表面。尝试将这种非Pt类材料用于电催化氧化原反应,测试结果表明,WS₂在碱性条件下氧还原活性非常低,但是复合RGO形成WS₂/RGO复合材料后,电催化氧化原性能有了极大的提高,其起始电位为-0.17 V(vs SCE),转移电子数为3.7,极限电流密度为2.5 mA·cm^-2,同时其具有较好的抗甲醇性能和循环稳定性。这是因为WS₂/RGO复合材料的二维结构具有更高的电子传输速率,同时硫化钨和石墨烯可以发挥协同催化作用。这种新型的二硫化钨/石墨烯(WS₂/RGO)复合材料作为非贵金属催化剂表现出良好的氧还原性能,在燃料电池上具有较好的应用前景。     

Uniform Functionalization of High-Quality Graphene with Platinum Nanoparticles for Electrocatalytic Water Reduction

Graphene–metal composites have potential as novel catalysts due to their unique electrical properties. Here, we report the synthesis of a composite material comprised of monodispersed platinum nanoparticles on high-quality graphene obtained by using two different exfoliation techniques. The material, prepared via an easy, low-cost and reproducible procedure, was evaluated as an electrocatalyst for the hydrogen evolution reaction. The turnover frequency at zero overpotential (TOF₀ in 0.1 m phosphate buffer, pH 6.8) was determined to be approximately 4600 h⁻¹. This remarkably high value is likely due to the optimal dispersion of the platinum nanoparticles on the graphene substrate, which enables the material to be loaded with only very small amounts of the noble metal (i.e., Pt) despite the very highly active surface. This study provides a new outlook on the design of novel materials for the development of robust and scalable water-splitting devices.     

Self‐Assembled Platinum Nanoflowers on Polydopamine‐Coated Reduced Graphene Oxide for Methanol Oxidation and Oxygen Reduction Reactions

The morphology‐ and size‐controlled synthesis of branched Pt nanostructures on graphene is highly favorable for enhancing the electrocatalytic activity and stability of Pt. Herein, a facile approach is developed for the efficient synthesis of well‐dispersed Pt nanoflowers (PtNFs) on the surface of polydopamine (PDA)‐modified reduced graphene oxide (PDRGO), denoted as PtNFs/PDRGO, in high yield. The synthesis was performed by a simple heating treatment of an aqueous solution that contained K₂PtCl₄ and PDA‐modified graphene oxide (GO) without the need for any additional reducing agent, seed, surfactant, or organic solvent. The coated PDA serves not only as a reducing agent, but also as cross‐linker to anchor and stabilize PtNFs on the PDRGO support. The as‐prepared PtNFs/PDRGO hybrid, with spatially and locally separated PtNFs on PDRGO, exhibits superior electrocatalytic activity and stability toward both methanol oxidation reaction (MOR) and oxygen reduction reaction (ORR) in alkaline solutions.     

A Vanadium(V) Oxide Nanorod Promoted Platinum/Reduced Graphene Oxide Electrocatalyst for Alcohol Oxidation under Acidic Conditions

A Pt‐V₂O₅/rGO ternary hybrid electrocatalyst was designed by using active vanadium(V) oxide (V₂O₅) nanorods and reduced graphene oxide (rGO) components. The V₂O₅ nanorods were synthesized by a simple polyol‐assisted solvothermal method and were incorporated uniformly onto rGO sheets by intermittent microwave heating. Subsequently, Pt nanoparticles (2–3 nm in size) were deposited over the V₂O₅/rGO composite by the conventional polyol reflux method. The electrocatalytic performance of the Pt‐V₂O₅/rGO ternary hybrid and bare Pt/rGO catalysts towards the oxidation of simple alcohols was evaluated in acidic media. The ternary hybrid catalyst exhibited higher electrocatalytic activity than bare Pt/rGO and also showed good stability. The higher electrocatalytic activity of the Pt‐V₂O₅/rGO ternary hybrid was attributed to a synergistic effect among the Pt, V₂O₅, and rGO components. In addition, oxygen‐containing species, such as OH groups, were generated on V₂O₅ at lower potentials. These groups were able to scavenge intermediate species such as CO_ads on the Pt surfaces and helped to regenerate the active sites on the Pt surface more effectively for the routine alcohol oxidation reaction.     

石墨烯的制备

以球形石墨为原料, HClO₄为插层剂,KClO₃为氧化剂,采用高温(1 050 ℃)氧化还原法制备了石墨烯（GN）,其结构和性能经FT-IR, XRD, SEM, TEM, BET和RS等表征。研究了KClO₃的加入量对GN结构和性能的影响,结果表明:当KClO₃的加入量为0.08 g·mL^-1时,所制备的GN的比表面积为558 m²·g^-1,平均孔径为3.012 nm,电阻率为0.02 Ω·cm。     

铜/石墨烯复合材料的制备及催化性能

采用水热法制备铜/石墨烯(Cu/RGO)复合材料,通过XRD、FTIR、SEM和TEM对材料的结构和形貌进行表征,并考察了复合材料在H₂O₂辅助作用下对次甲基蓝(MB)的催化作用。结果表明,该复合材料中石墨烯所负载的铜颗粒尺寸较小且分布均一,对MB的催化效果良好,0.18 g·L^-1复合催化剂在300 min内对MB的脱色效果可达90.7%,经过5次循环仍有88.0%以上。     

铜/石墨烯复合材料的制备及催化性能

采用水热法制备铜/石墨烯(Cu/RGO)复合材料,通过XRD、FTIR、SEM和TEM对材料的结构和形貌进行表征,并考察了复合材料在H_2O_2辅助作用下对次甲基蓝(MB)的催化作用。结果表明,该复合材料中石墨烯所负载的铜颗粒尺寸较小且分布均一,对MB的催化效果良好,0.18 g·L~(-1)复合催化剂在300 min内对MB的脱色效果可达90.7%,经过5次循环仍有88.0%以上。