Esterification of carboxylate-based ionic liquids with alkyl halides

A facile reaction of 1-ethyl-3-methylimidazolium acetate ([EMIm]Ac) with dichloromethane at room temperature was observed with esters among the products. This esterification can be exploited for mild solvent-free esterification with a range of other carboxylate-based ionic liquids and alkyl halides.     

Palladium-nanoparticles catalyzed hydrodehalogenation of aryl chlorides in ionic liquids

Pd-nanoparticles, in molten tetrabutylammonium bromide as the solvent and tetrabutylammonium acetate as the base, catalyze the hydrodehalogenation of various aryl chlorides under hydrogen at atmospheric pressure. Recycling experiments show a decreasing activity of this catalyst due to a small leaching of palladium from the ionic liquid phase during the extraction of the reaction products with cyclohexane. On the contrary, leaching is avoided when vacuum distillation is used to separate the dehalogenated products form the reaction mixture, thus allowing an extensive recycling of the Pd-catalyst.     

Cationic polymerization of vinyl ethers with alkyl or ionic side groups in ionic liquids

Controlled cationic polymerization of isobutyl vinyl ether was demonstrated to proceed in an ionic liquid (IL), 1‐butyl‐3‐octylimidazolium bis(trifluoromethanesulfonyl)imide, using a 1‐(isobutoxy)ethyl acetate/TiCl₄ initiating system, ethyl acetate as an added base, and 2,6‐di‐tert‐butylpyridine as a proton trap reagent. Judicious choices of metal halide catalysts, counteranions of ILs, and additives were essential for controlling the polymerization. The polymerization proceeded much faster in the IL than in CH₂Cl₂, indicating an increased population of ionic active species in the IL due to the high polarity. Polymers with a relatively narrow molecular weight distribution were obtained in the IL with a bis(trifluoromethanesulfonyl)imide ( ) anion even in the absence of an added base, which suggested possible interactions of the counteranion of the IL with the growing carbocations. Moreover, the direct cationic polymerization of a vinyl ether with pendant imidazolium salts, 1‐(2‐vinyloxyethyl)‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide, proceeded in a homogeneous state in 1‐methyl‐3‐octylimidazolium bis(trifluoromethanesulfonyl)imide. The solubilities of the obtained polymers were readily tuned by counteranion exchange. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1774–1784     

Structurally tunable characteristics of ionic liquids for optimizing lithium plating/stripping via electrolyte engineering

Electrolyte chemistry offers the opportunity to regulate the solid electrolyte interphase (SEI) and Li+ sol-vation,which is considered to be crucial to the grow...     

Protic ionic liquids: solvents with tunable phase behavior and physicochemical properties

The phase behavior, including glass, devitrification, solid crystal melting, and liquid boiling transitions, and physicochemical properties, including density, refractive index, viscosity, conductivity, and air-liquid surface tension, of a series of 25 protic ionic liquids and protic fused salts are presented along with structure-property comparisons. The protic fused salts were mostly liquid at room temperature, and many exhibited a glass transition occurring at low temperatures between -114 and -44 degrees C, and high fragility, with many having low viscosities, down to as low as 17 mPa.s at 25 degrees C, and ionic conductivities up to 43.8 S/cm at 25 degrees C. These protic solvents are easily prepared through the stoichiometric combination of a primary amine and Br?nsted acid. They have poor ionic behavior when compared to the far more studied aprotic ionic liquids. However, some of the other physicochemical properties possessed by these solvents are highly promising and it is anticipated that these, or analogous protic solvents, will find applications beyond those already identified for aprotic ionic liquids. This series of protic fused salts was employed to determine the effect of structural changes on the physicochemical properties, including the effect of hydroxyl groups, increasing alkyl chain lengths, branching, and the differences between inorganic and organic anions. It was found that simple structural modifications provide a mechanism to manipulate, over a wide range, the temperature at which phase transitions occur and to specifically tailor physicochemical properties for potential end-use applications.     

Mercury extraction by ionic liquids: temperature and alkyl chain length effect

The preliminary results described here show the complete transfer of Hg(II) ions, in the absence of a chelating agent in 1-alkyl-3-methylimidazolium hexafluorophosphate ionic liquids; the lag time required to gain the quantitative metal ion partition turned out to be strongly dependent both on alkyl chain length on the imidazolium ring and on the working temperature.     

Synthesis of aryl/alkyl(2,2′-bis-3-methylindolyl)methanes and aryl(3,3′-bis indolyl)methanes promoted by secondary amine based ionic liquids and microwave irradiation

Aryl/alkyl(2,2′-bis-3-methylindolyl)methanes and aryl(bis-3,3′-indolyl)methanes are synthesized in high yield using ionic liquids mediated by microwave. Reaction conditions and product recovery are simple and ionic liquids could be recycled.     

Vaporization enthalpies of imidazolium based ionic liquids: dependence on alkyl chain length

Vaporization enthalpies of a series of ten 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ionic liquids (ILs) [C(n) mim][NTf(2) ] with alkyl chain lengths of n=2, 3, 4, 6, 8, 10, 12, 14, 16, and 18 are determined by using a recently developed quartz crystal microbalance method. Due to the high sensitivity of the microbalance vapor studies can be extended to temperatures 60-100 K lower than those available with other methods. The results reveal a remarkably linear dependence of the vaporization enthalpies on the chain length at the reference temperature of 298 K.     

烷基咪唑型离子液体与牛血清白蛋白的相互作用研究

应用荧光光谱、紫外吸收光谱、傅立叶变换红外光谱和核磁共振波谱研究了烷基咪唑型离子液体[bmim][PF6]及其前体物质[bmim]Cl与牛血清白蛋白(BSA)分子间的相互作用.研究表明:在生理pH值条件下,[ bmim][ PF5]和[bmim] Cl均对BSA的内源性荧光产生猝灭,其猝灭程度[bmim][ PF6]＞...     

Aggregation behavior of alkyl triphenyl phosphonium bromides in aprotic and protic ionic liquids

The aggregation behavior of alkyltriphenylphonium bromides, C _n TPB (n?=?12 and 14), has been investigated in two different room-temperature ionic liquids (ILs), the aprotic 1-butyl-3-metyllimidazolium tetrafluoroborate ([bmim][BF₄]), and the protic ethylammonium nitrate (EAN). The critical micelle concentration was determined by the surface tension measurements. The calculated thermodynamic parameters based on surface tension measurements at various temperatures indicate that the micellization for C _n TPB in both aprotic [bmim][BF₄] and protic EAN is enthalpy-driven. But stronger solvophobic interactions presented between C _n TPB and protic EAN than aprotic [bmim][BF₄]. ¹H NMR spectra were further conducted to reveal that ethylammonium cation can insert into the micelle while imidazole cation only locates among the head groups of C _n TPB.     

Synthèse de N-2 alkyl (aryl) dioxo-3,5 oxadiazolidine-1,2,4

The synthesis of new 3,5 dioxo-1,2,4 oxadiazolidines whixh are N-2 substituted bioisosters of biologically active carboxylic compounds was studies. Nitro compounds were used as starting materials, and triton B as the cyclizing base. The expected N-2 allyl and aryl substituted derivatives were obtained in satisfactory yields.     

Reusable copper-catalyzed cross-coupling reactions of aryl halides with organotins in inexpensive ionic liquids

A combination of Cu2O nanoparticles with P(o-tol)3 shows highly catalytic activity for the Stille cross-coupling reaction. A series of copper catalysts and ligands were evaluated, and Cu2O nanoparticles combined with P(o-tol)3 provided the best results. In the presence of Cu2O nanoparticles and P(o-tol)3, a variety of aryl halides including aryl chlorides underwent the Stille reaction with organotins smoothly in moderate to excellent yields using inexpensive TBAB (n-Bu4NBr) as the medium. It is noteworthy that the Cu2O/P(o-tol)3/TBAB system can be recovered and reused at least three times without any loss of catalytic activity among the reactions of aryl iodides and activated aryl bromides.     

Conformational analysis of alkyl aryl ethers and alkyl aryl sulphides by photoelectron spectroscopy

Photoelectron spectroscopy shows that in t-butoxybenzenes, but not in methoxy-, ethoxy- or isopropoxybenzenes, there is a loss of p-π orbital overlap. A similar effect is observed in 2,6-dimethylalkoxybenzenes. In alkyl aryl sulphides two conformers predominate, the one with maximum p-π overlap and the other with reduced overlap. The importance of the less conjugated conformer increases monotonously through the series hydrogen, methyl, ethyl, isopropyl and t-butyl in alkyl phenyl sulphides.     

An iron-containing ionic liquid as recyclable catalyst for aryl grignard cross-coupling of alkyl halides

[reaction: see text] The ionic liquid butylmethylimidazolium tetrachloroferrate (bmim-FeCl(4)) was found to be a very effective and completely air stable catalyst for the biphasic Grignard cross-coupling with primary and secondary alkyl halides bearing beta-hydrogens. After simply decanting the product in the ethereal layer, the ionic liquid catalyst was successfully recycled four times.     

Heterogeneous oxidation of pyrimidine and alkyl thioethers in ionic liquids over mesoporous Ti or Ti/Ge catalysts

Heterogeneous catalytic oxidation of a series of thioethers (2-thiomethylpyrimidine, 2-thiomethyl-4,6-dimethyl-pyrimidine, 2-thiobenzylpyrimidine, 2-thiobenzyl-4,6-dimethylpyrimidine, thioanisole, and n-heptyl methyl sulfide) was performed in ionic liquids by using MCM-41 and UVM-type mesoporous catalysts containing Ti, or Ti and Ge. A range of triflate, tetrafluoroborate, trifluoroacetate, lactate and bis(trifluoromethanesulfonyl)imide-based ionic liquids were used. The oxidations were carried out by using anhydrous hydrogen peroxide or the urea-hydrogen peroxide adduct and showed that ionic liquids are very effective solvents, achieving greater reactivity and selectivity than reactions performed in dioxane. The effects of halide and acid impurities on the reactions were also investigated. Recycling experiments on catalysts were carried out in order to evaluate Ti leaching and its effect on activity and selectivity.     

Highly efficient CO2 capture by tunable alkanolamine-based ionic liquids with multidentate cation coordination

A series of novel alkanolamine-based ionic liquids show a highly efficient and excellent reversible capture of CO(2) through multidentate cation coordination between alkanolamine and Li(+) ion in a quasi-aza-crown ether fashion.     

Block copolymer micelle shuttles with tunable transfer temperatures between ionic liquids and aqueous solutions

Four poly((1,2-butadiene)- block-ethylene oxide) (PB-PEO) diblock copolymers were shown to self-assemble into micelles with PB cores and PEO coronas (including spheres, cylinders, and vesicles) in the ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][TFSI]). All four systems exhibited the "micelle shuttle" (He, Y.; Lodge, T. P. J. Am. Chem. Soc. 2006, 128, 12666-12667), whereby PB-PEO micelles transferred, reversibly and with preservation of micelle structure, from an aqueous phase at room temperature to a hydrophobic ionic liquid at high temperature. The micelle size (both mean and distribution) depends on whether it was initially dissolved in water or in the ionic liquid, but the initial micelle structures in the ionic liquid were shown by dynamic light scattering to be preserved during the transfer and persist essentially unchanged for months in both the ionic liquid and water. The transfer was shown to be driven by the deteriorating solvent quality of water for PEO at high temperature, while the ionic liquid remains a good solvent. The transfer temperature could be tuned by adding ionic or nonionic additives to the aqueous phase to change the solvent quality of water for PEO, and by using ionic liquids with different polarity.