Non-destructive neutron activation analysis of the Naragh meteorite

The concentration of 18 elements in the Naragh meteorite that fell in Iran on August 18, 1974, has been measured by neutron activation analysis employing a high resolution Ge(Li) detector.     

Determination of iron isotopes by neutron activation analysis

Instrumental neutron activation analysis has been applied to the determination of Fe isotopic abundances in iron materials with the experimental accuracy of 5%. The proposed method can be considered as a quite simple and fast quality check system on the iron isotope enriched oxides used as standard in Mössbauer spectroscopy.     

Determination of silicon in iron by thermal neutron activation

A new chemical separation procedure for the determination of silicon in iron after neutron activation was developed. It uses two separation steps, one on a cation exchange resin in HCl−HF-acetone medium, and the other on alumina at pH 9. The detection limit for silicon was 0.02 μg. This analytical procedure was applied to the control of the zone-melting purification of iron.     

Chemical characterization of graphite by instrumental neutron activation analysis

Nuclear and commercial grade graphite samples were analysed by instrumental neutron activation analysis (INAA) using high flux reactor neutrons. Eleven elements (Na, K, As, Sc, Fe, Cr, Co, Zn, La, Ce, and Sm) were determined in eight samples of graphite (two nuclear grade and six commercial grade) by irradiating at a neutron flux of 3?×?10¹³ cm^?2 s^?1 in CIRUS reactor and assaying the activity by high-resolution gamma ray spectrometry using 40% relative efficiency HPGe detector coupled to an MCA. Concentrations of elements were determined by relative method of INAA. Results of both types of graphites as well as detection limits achieved by INAA method are discussed in the paper.     

Determination of trace siderophile elements in rock and meteorite samples by radiochemical neutron activation analysis

A simple and effective radiochemical procedure for radiochemical neutron activation analysis (RNAA) of ultra-trace siderophile elements (Ru, Re, Os and Ir) and rare earth elements (REEs) in rock and meteorite samples is presented. To design the procedure, several separation schemes of siderophile elements were examined by using radioactive tracers. By applying the procedure to rock and meteorite samples, we have determined Ru, Re, Os, Ir and REEs, and confirmed that our values were in agreement with the literature values. Our detection limits for Ru, Re, Os, La, Sm and Eu are significantly low compared with those for ICP-MS.     

Determination of silicon in cast iron by 14 MeV neutron activation

Silicon in cast iron was analyzed by 14 MeV neutron activation—high-resolution γ-ray spectrometry. Silicon was detected as²⁸Al, the product of the²⁸Si(n, p)²⁸Al reaction. Interference of⁵⁶Mn was separated using a Ge(Li) detector and a biased amplifying system. The 1. 81 MeV gamma-radiation of⁵⁶Mn, which is the product of the⁵⁶Fe(n, p)⁵⁶Mn reaction of the matrix of cast iron, was used as an internal standard and for correction of the self-absorption of the 1. 78 MeV gamma-radiation of²⁸Al by the sample. The interferences of aluminum, phosphorus and manganese could be neglected according to the results calculated from their nuclear properties and contents in the cast iron of this experiment. The results of this method agreed well with the results of the usual chemical method, with errors less than 5% of the results, and the precision of the method was satisfactory with a C. V. of less than almost 6% for rapid analysis of silicon in cast iron. The analytical line through the origin with a slope of the mean value of the repetition experiments could be used as the analytical line with almost the same precision and accuracy of the results as for the analytical line calculated by the least squares method.     

Multielement neutron activation analysis of an iron ore

Multielemental analysis of an iron ore from the Kingdom of Saudi Arabia was carried out using Instrumental Neutron Activation Analysis (INAA) with Ge(Li) detectors. The spectra were analysed with the help of an off-line computer programme. Twenty five elements are observed to be present in the ore. The elements of major interest are Fe, Al and Ca with 51.5%, 3.6% and 2.2% concentrations, respectively.     

Non-destructive elemental analysis of large meteorite samples by prompt gamma-ray neutron activation analysis with the internal mono-standard method

Prompt gamma-ray neutron activation analysis (PGNAA) using the internal mono-standard method was tested for its applicability to analyzing large solid samples including irregularly shaped meteorite samples. For evaluating the accuracy and precision of the method, large quantities of the Geological Survey of Japan standardized rock powders (JB-1a, JG-1a, and JP-1) were analyzed and 12 elements (B, Na, Mg, Al, Cl, K, Ca, Ti, Mn, Fe, Sm, and Gd) were determined by using Si as an internal standard element. Analytical results were mostly in agreement with literature values within 10 %. The precision of the method was also shown to be within 10 % (1σ) for most of these elements. The analytical procedure was then applied to four stony meteorites (Allende, Kimble County, Leedey, Lake Labyrinth) and four iron meteorites (Canyon Diablo, Toluca (Mexico), Toluca (Xiquipilco), Squaw Creek) consisting of large chunks or single slabs. For stony meteorites, major elements (Mg, Al, Si, S, Ca, and Ni), minor elements (Na and Mn) and trace element (B, Cl, K, Ti, Co, and Sm) were determined with adequate accuracy. For iron meteorites, results for the Co and Ni mass fractions determined are all consistent with corresponding literature values. After the analysis, it was confirmed that the residual radioactivity remaining in the sample after PGNAA was very low and decreased down to the background level. This study shows that PGNAA with the internal mono-standard method is highly practical for determining the elemental composition of large, irregularly shaped solid samples including meteorites.     

Chemical characterisations of Anatolian obsidians by instrumental and epithermal neutron activation analysis

Obsidian is a volcanic glass which is generally black, sometimes grey, brown, red or green in colour and characterised by a glassy appearance and conchoidal fractures. It is formed by the sudden cooling of the molten, generally acid magma with high water content. Obsidian was widely used for tool-making during prehistoric times. This work concems the chemical characterisation of obsidian occurrences from Northem, Central and Eastem Anatolia by Instrumental and Epithemal Neutron Activation Analysis for obtaining an accurate fingerprint for discrimination of potential natural sources of raw material that would permit tracing the origin of archaeological obsidian artefacts.     

Chemical characterization of Yapese clays and ceramics by instrumental neutron activation analysis

Chemical-characterization data from INAA provided information for understanding procurement of clays and production of ceramics in the Yapese past. By integrating mineralogical and chemical composition studies, we suggest clay-source zone distinctions for the different Yapese ceramic wares. This revised version was published online in July 2006 with corrections to the Cover Date.     

Chemical characterization of gas- and oil-bearing shales by instrumental neutron activation analysis

The concentration of As, Ba, Ca, Co, Cr, Cs, Dy, Eu, Fe, Ga, Hf, K, La, Lu, Mn, Mo, Na, Ni, Rb, Sb, Sc, Se, Sm, Sr, Ta, Tb, Th, U, Yb, and Zn were determined by instrumental neutron activation analysis in block shale samples of the New Albany Group (Devonian-Mississippian) in the in the Illinois Basin. Uranium content of the samples was as high as 75 ppm and interfered in the determination of samarium, molybdenum, barium and cerium. In the determination of selenium a correction was made for interference from tantalum. U, As, Co, Mo, Ni and Sb as well as Cu, V and pyritic sulphur which were determined by other methods, were found to correlate positively with the organic carbon content of the samples.     

Measuremets of presolar grain in meteorite using neutron activation analysis with multi-parameter coincidence method

Neutron activation analysis with multi-parameter coincidence method was developed at the Japan Atomic Energy Agency (JAEA) and a non-destructive, ultra-high sensitive multi-elemental determination has been realized. The multi-parameter coincidence method is carried out with an array of 19 germanium detectors, GEMINI-II. Using this system, very weak γ-rays emitted from trace amounts of elements can be detected. The presolar grains were extracted from the Allende meteorite. Trace elements in the presolar diamonds were measured by neutron activation analysis with multi-parameter coincidence method.     

New studies in forensic neutron activation analysis

Earlier studies in forensic neutron activation analysis are being extended in this Laboratory. Three of these new studies are reported here: (1) a study of 0.22-caliber rimfire cartridge primers, (2) a large-scale study of shotgun pellets, and (3) a new 5-element procedure for the analysis of bullet-lead and shotgun-pellet samples.     

Chemical characterisations of Carpathian obsidian sources by instrumental and epithermal neutron activation analysis

Obsidian samples from the Tokaj Mountains (Hungary) and from the neighbouring Zemplin Hills (Slovakia) were analysed by instrumental and epithermal neutron activation analysis for obtaining a “fingerprint” for discrimination of potential natural sources of raw material that would permit tracing the origin of archaeological obsidian artefacts. These techniques fully discriminate the Zemplin Hills sources (Carpathian I, eastern Slovakia) and the Tokaj Mountain sources (Carpathian II, north-eastern Hungary) as well as these Central European sources from those already studied of the Mediterranean basin and adjacent regions.     

Marine gradients of halogens in moss studies by epithermal neutron activation analysis

INAA is known to be a powerful technique for the simultaneous determination of chlorine, bromine and iodine. In this paper INAA using epithermal neutrons is shown to be particularly useful to elucidate marine gradients of these elements. Examples are from a transect study in northern Norway where samples of the feather moss Hylocomium splendens were collected at distances of 0-300 km from the coastline. All three elements decrease exponentially as a function of distance from the ocean in the moss samples, strongly indicating that the atmospheric supply from the marine environment is the predominant source of these elements to the terrestrial ecosystem. It is suggested that environmental studies of halogens in general and iodine in particular is a promising future area of application for INAA, when employing epithermal neutrons. This revised version was published online in July 2006 with corrections to the Cover Date.     

In-beam neutron activation analysis of stainless steel and iron ore

Pulse radiolysis of MIT and DIT irradiated to doses from 2.8·10⁴ to 85·10⁴ rads is studied by ascending chromatography. The 3-iodo-4,5-dihydroxyphenylalanine (DOPA-I) and 3-iodo-4-hydroxyphenylalanine have been identified as first stages of degradations of MIT and DIT, respectively. G values are 0.015 for MIT (10⁻⁵M) and 0.004 for DIT (0.5·10⁻⁵M). By self decomposition MIT is degraded less rapidly than DIT and there is no formation of DOPA-I.      

Chemical separation techniques for neutron activation analysis as used at the Dow Chemical Co

The chemical separation techniques used at the Dow Chemical Co. are discussed.     

Determination of the iron content of aluminate liquors from the Bayer alumina process by neutron activation analysis

The behaviour of iron in the Bayer process has been investigated by neutron activation analysis and Ge(Li) spectrometry, using bauxite samples of various origin. The amount of iron impurities in alumina was found to be independent of the origin of the bauxites. Alumina is contaminated by iron in the process of decomposition of aluminate liquors; regardless whether iron is present in ‘dissolved’ form or as a floating impurity, it will pass into the alumina almost completely.     

Feasibility studies of neutron activation analysis with kilogram-size samples

Instrumental neutron activation analysis (INAA) can now directly be applied to samples with masses in the kilogram range. It enables the analysis of material which is considered to be not representative at the scale of the traditional analytical portion, but representative at much larger scale. Large sample INAA (LS-INAA) circumpasses various problems associated with sample-size reduction and homogenization. Examples of feasibility studies are given as on construction waste, contaminated soil, harbour sediment and recyclable material. Also the economics of this method of analysis is discussed.     

Application of neutron activation analysis in acid precipitation studies

Instrumental neutron activation analysis has been successfully employed in three distrinct acid precipitation studies. These include the determination of ten (Al, Br, Ca, Cl, Cu, I, Mg, Mn, Na and V) elements in urban rainfall, elevated aluminum concentrations in acidified lakes and major ions (Ca, Cl, K, Mg and Na) in small-mouth bass kept in controlled pH environments. Quality control was assured by analyzing two certified standard reference materials prepared by the National Bureau of Standards (NBS 1643a) and National Research Council of Canada (hepatopancreas TORT-1 marine biological tissue).