Conformational studies on somep-dimethylaminostyryl dyes

PCILO computations have been carried out on the conformations of five p-dimethylaminostyryl dyes derived from quinoline-4 (I), quinoline-2 (II), pyridine-4 (III), pyridine-2 (IV) and benzothiazole (V). The stable conformations of I–IV are found to be nonplanar, while V is almost planar. The results have been explained in terms of various possible steric interactions.     

A new spot test for cerium(IV) using triphenylmethane dyes

Summary A new sensitive and selective spot test for cerium(IV) using the triphenylmethane dyes, Erioglaucine A, Eriogreen B, Xylenecyanol FF, Setoglaucine O, and Setocyanine Supra, respectively, is described. The method consists of adding one drop of the dye solution (0.1%) to a drop of cerium(IV) solution, and then treating the mixture with sufficient amount of sulfuric, perchloric, or phosphoric acid to maintain the acidity at 6 to 9M. The colors produced with these dyes are: Erioglaucine A: orange, Eriogreen B: bright red, Xylenecyanol FF: orange yellow, Setoglaucine O: bright orange, and Setocyanine Supra: pink. The identification limit is 1 g in 1.5 ml, and the dilution limit is 11.5 · 10⁶ in all these cases. Many cations and anions do not interfere in the test, whereas reducing agents like Fe(II), Mo(V), U(IV), and hydroquinone, fluoride and EDTA interfere.

---

Zusammenfassung Eine neue empfindliche und selektive Tüpfelnachweisreaktion für Cer(IV) mit den Triphenylmethanfarbstoffen Erioglaucin A (I), Eriogrün B (II), Xylolcyanol FF (III), Setoglaucin O (IV) bzw. Setocyanin Supra (V) wurde beschrieben. Man gibt einen Tropfen 0,1%ige Farbstofflösung zu einem Tropfen Cer(IV)-Lösung und behandelt die Mischung mit Schwefelsäure, Perchlorsäure oder Phosphorsäure, um 6 -bis 9-m Acidität zu erreichen. Die mit den genannten Farbstoffen erzielten Farbreaktionen sind: mit I orange, mit II leuchtend rot, mit IV leuchtend orange, mit III orange-gelb, mit V rosa. Die Erfassungsgrenze beträgt 1g/1,5 ml, die Grenzkonzentrationen in jedem Fall 11,5 · 10⁶. Viele Kationen und Anionen stören nicht, aber Reduktionsmittel wie Fe(II), Mo(V), U(IV), Hydrochinon sowie Fluorid und ÄDTA stören.

     

Some New Reagents in Inorganic Paper Chromatography

Abstract

Sensitive colour reactions given by 2-Hydroxy-4-methoxyacetophenone; 4-Benzyloxyresacetophenone; 2′, 4′, 4-Trihydroxychalkone; 2-Hyaroxy-4′, 6′-dimethoxychalkone and 2-Methyl-5,7-dihydroxychromone are reported as chromatographic spray reagents for the detection of a number of metal ions on paper chromatograms. Sensitivity limits for detection of Be(II), Al(III), V(IV), Fe(II), Fe(III) and Th(IV) in relation to 2-Hydroxy-4-methoxyacetophenone; 2′-Hydroxy-4′, 6′-dimethoxychalkone; 2′, 4′, 4-Trihydroxychalkone and 2-Methyl-5, 7-dihydroxychromone are also reported alongwith separation of groups of metal ions by using three new solvent systems.     

New processable polyaromatic esters curable by intramolecular cyclization. XVIII

New processable polyaromatic esters were prepared from 2,2′-diiododiphenyl-4,4′-dicarbonyl dichloride (I), isophthaloyl chloride (II), and/or terephthaloyl chloride (III) with 4,4′-isopropylidene diphenol (IV), 4,4′-sulfonyldiphenol (V), or resorcinol by interfacial condensation. In these polymers phenylacetylenyl groups were introduced by replacing the iodine. This process led to soluble and curable polymers. Polymer films can be prepared. After curing the polymers were insoluble and showed excellent thermal and chemical resistance. The curing process increased the polymers' softening temperature about 20°C.     

Amine-templated linear vanadium sulfates with different chain structures

Amine-templated vanadium sulfates of the formula [HN(CH(2))(6)NH][(V(IV)O)(2)(OH)(2)(SO(4))(2)].H(2)O, I, [H(3)N(CH(2))(2)NH(3)][V(III)(OH)(SO(4))(2)].H(2)O, II, and [H(2)N(CH(2))(4)NH(2)][(V(IV)O)(H(2)O)(SO(4))(2)], III, have been prepared under hydrothermal conditions. These vanadium sulfates add to the new emerging family of organically templated metal sulfates. Compound I has a linear chain structure consisting of V(2)O(8) square-pyramid dimers connected by corner-sharing SO(4) tetrahedra, creating four-membered rings along the chain. Both II and III possess simple linear chain topologies formed by VO(6) octahedra and SO(4) tetrahedra, with II having the tancoite chain structure. Compound I crystallizes in the triclinic space group P1 (No. 2) with a = 7.4852(4) A, b = 9.5373(5) A, c = 11.9177(6) A, alpha = 77.22 degrees, beta = 76.47(2) degrees, gamma = 80.86 degrees, Z = 2. Compound II: monoclinic, space group P2(1)/c (No. 14), a = 6.942(2) A, b = 10.317(3) A, c = 15.102(6) A, beta = 90.64(4) degrees, Z = 4. Compound III: triclinic, space group P1 (No. 2) with a = 6.2558(10) A, b = 7.0663(14) A, c = 15.592(4) A, alpha = 90.46(2) degrees, beta = 90.47(2) degrees, gamma = 115.68(2) degrees, Z = 2. Magnetic susceptibility measurements reveal weak antiferromagnetic interactions in I and III and ferromagnetic interactions in II.     

The mutual influence of the chromophores of two cyanine dyes connected through a benzene nucleus

Three isomeric biscyanine dyes have been synthesized, each of which forms a pair of indothiazolocarbocyanines attached to a p-phenylene group through the 4,4′ (I), 5, 5′ (II), and 3, 3′ (III) positions of the thiazole nuclei. It has been found that in the biscyanines II and III the polymethine chromophores are conjugated and influence one another, which is shown by the splitting of the absorption bands of these dyes. In the biscyanines I, no interaction of the chromophores is observed.     

Reaktionsprodukte aus Antimon(V)-chlorid und N,N′-Dimethyloxamid und deren Schwingungsspektren

Reaction Products of Antimony(V) Chloride and N, N′-Dimethyloxamide and their Vibrational Spectra N, N′-Dimethyloxamide reacts with antimony(V) chloride at lower temperatures to the 1:1 resp. 1:2 addition compounds I resp. II. Pyrolysis of these compounds leads to the cyclic tetrachloroantimony(V)-N, N′-dimethyloxamides (III) resp.(V). III yields with antimony(V) chloride the 1:1 adduct IV, which is transformed to V. The vibrational spectra were assigned and discussed.     

Über die Reaktion substituierter Thioxanthenoxide mit Säuren

9-[(N-Methyl-3′-piperidyl)-methyl]-thioxanthene-10-oxide (I) on treatment with boiling concentrated hydrochloric acid gives mainly 9-[(N-methyl-3′-piperidyl)-methylene]-thioxanthene (IV) together with small amounts of 9-[(N-methyl-3′-piperidyl)-chloro-methylene]-thioxanthene(II), 9-hydroxy-9-[(N-methyl-3′-piperidyl)-methyl]-thioxanthene (III) and 9-[(N-methyl-3′-piperidyl)-methyl]-thioxanthene (V). Treatment of I with acetic anhydride yields only IV.     

Coordination and Redox Chemistry of Substituted-Polypyridyl Complexes of Ruthenium

The complexes [Ru(tpy)(acac)(Cl)], [Ru(tpy)(acac)(H(2)O)](PF(6)) (tpy = 2,2',2"-terpyridine, acacH = 2,4 pentanedione) [Ru(tpy)(C(2)O(4))(H(2)O)] (C(2)O(4)(2)(-) = oxalato dianion), [Ru(tpy)(dppene)(Cl)](PF(6)) (dppene = cis-1,2-bis(diphenylphosphino)ethylene), [Ru(tpy)(dppene)(H(2)O)](PF(6))(2), [Ru(tpy)(C(2)O(4))(py)], [Ru(tpy)(acac)(py)](ClO(4)), [Ru(tpy)(acac)(NO(2))], [Ru(tpy)(acac)(NO)](PF(6))(2), and [Ru(tpy)(PSCS)Cl] (PSCS = 1-pyrrolidinedithiocarbamate anion) have been prepared and characterized by cyclic voltammetry and UV-visible and FTIR spectroscopy. [Ru(tpy)(acac)(NO(2))](+) is stable with respect to oxidation of coordinated NO(2)(-) on the cyclic voltammetric time scale. The nitrosyl [Ru(tpy)(acac)(NO)](2+) falls on an earlier correlation between nu(NO) (1914 cm(-)(1) in KBr) and E(1/2) for the first nitrosyl-based reduction 0.02 V vs SSCE. Oxalate ligand is lost from [Ru(II)(tpy)(C(2)O(4))(H(2)O)] to give [Ru(tpy)(H(2)O)(3)](2+). The Ru(III/II) and Ru(IV/III) couples of the aqua complexes are pH dependent. At pH 7.0, E(1/2) values are 0.43 V vs NHE for [Ru(III)(tpy)(acac)(OH)](+)/[Ru(II)(tpy)(acac)(H(2)O)](+), 0.80 V for [Ru(IV)(tpy)(acac)(O)](+)/[Ru(III)(tpy)(acac)(OH)](+), 0.16 V for [Ru(III)(tpy)(C(2)O(4))(OH)]/[Ru(II)(tpy)(C(2)O(4))(H(2)O)], and 0.45 V for [Ru(IV)(tpy)(C(2)O(4))(O)]/[Ru(III)(tpy)(C(2)O(4))(OH)]. Plots of E(1/2) vs pH define regions of stability for the various oxidation states and the pK(a) values of aqua and hydroxo forms. These measurements reveal that C(2)O(4)(2)(-) and acac(-) are electron donating to Ru(III) relative to bpy. Comparisons with redox potentials for 21 related polypyridyl couples reveal the influence of ligand changes on the potentials of the Ru(IV/III) and Ru(III/II) couples and the difference between them, DeltaE(1/2). The majority of the effect appears in the Ru(III/II) couple. ()A linear correlation exists between DeltaE(1/2) and the sum of a set of ligand parameters defined by Lever et al., SigmaE(i)(L(i)), for the series of complexes, but there is a dramatic change in slope at DeltaE(1/2) approximately -0.11 V and SigmaE(i)(L(i)) = 1.06 V. Extrapolation of the plot of DeltaE(1/2) vs SigmaE(i)(L(i)) suggests that there may be ligand environments in which Ru(III) is unstable with respect to disproportionation into Ru(IV) and Ru(II). This would make the two-electron Ru(IV)O/Ru(II)OH(2) couple more strongly oxidizing than the one-electron Ru(IV)O/Ru(III)OH couple.     

Photolysis of Isoniazid

The UV light irradiation of isoniazid (I) in methanol four products, isonicotinic acid (II), isonicotinamide (III), N, N′-bis(isonicotinic acid)hydrazide (IV) and isonicotinaldehyde isonicotinyl hydrazone (V), in ethanol three products, (III), (IV) and acetaldehyde isonicotinyl hydrazone (VI) were isolated and identified. Also, the photoreaction mechanism of isoniazid in methanol and ethanol were discussed.     

A study of the tautomerism of the N-butyl-4(2)-methoxycarbonyl-pyrrolid-3-ones and their hydrochlorides

The tautomerism of N-butyl-2-methoxycarbonyl-4-methylpyrrolid-3-one (I), N-butyl-4-methoxycarbonylpyrrolid-3-one (II), N-butyl-4-methoxycarbonyl-2-methylpyrrolid-3-one (III), N-butyl-4-methoxycarbonylpyrrolid-3-one hydrochloride (IV), and N-butyl-4-methoxy-carbonyl-2-methylpyrrolid-3-one hydrochloride (V) has been studied by UV and IR spectroscopy. It has been found that the esters I–V are highly ionized in aqueous and ethanolic solutions at concentrations of 10^?2–10^?3 M. On passing from methyl cyclopentran-1-one-2-carboxylate to the esters II and III the position of the equilibrium in heptane and CCl₄ shifts in the direction of the keto form. On passing from the esters II and III to the esters IV and V, the position of the equilibrium shifts in the direction of the enol. Meyer's relationship is not satisfied for the esters II and III, while it is satisfied for the esters IV and V. Hypotheses have been put forward on the causes of the phenomena mentioned.     

Extraktionsmethode zur Trennung kleiner Tellurmengen von Begleitelementen

Zusammenfassung Zur Trennung von Tellur aus Lösungen mit komplizierter Zusammensetzung wurde eine kombinierte Extraktionsmethode entwickelt. Die Extraktion von Eisen(III), Arsen(V), Antimon(V), Gold(III), Thallium(III), Wismut(III), Zinn(IV) und Selen(IV) erfolgt mit Diisopropyläther aus 8 M Salzsäure, wobei das gesamte Te(IV) in der wäßrigen Phase verbleibt. Diese wird dann mit Methylisobutylketon aus 4 M Salzsäure extrahiert, während in der wäßrigen Phase Kupfer(II), Aluminium(III), Silber(I), Nickel (II), Kobalt(II), Zink(II), Cadmium(II) und Blei(II) verbleiben. Die vollständige Abtrennung der Begleitelemente des Tellurs erfolgt durch zusätzliche Extraktion ihrer Kupferronate mit Methylisobutylketon bei pH 3–5. Das vorgeschlagene Extraktionsverfahren kann mit jeder bekannten Methode zur Bestimmung geringer Tellurmengen kombiniert werden.

---

Extraction method for the separation of small quantities of tellurium from accompanying elements

A new combined solvent extraction method is proposed for the separation of tellurium from solutions of complex composition. Iron(III), arsenic(V), antimony(V), gold(III), thallium(III)J bismuth(III), tin(IV) and selenium(IV) are extracted with diisopropyl ether from 8 M hydrochloric acid. Under these conditions tellurium(IV) is quantitatively retained in the aqueous phase. Subsequently tellurium(IV) is extracted from 4 M hydrochloric acid with methylisobutyl ketone, so that copper(II), aluminium(III), silver(I), nickel(II), cobalt(II), zink(II), cadmium(II) and lead(II) remain in. the aqueous phase. The complete separation of the accompanying elements is realized by an additional extraction of their cupferronates with methylisobutyl ketone at pH 3–5. The separation described can be combined with any known method for the determination of small amounts of tellurium(IV).

     

Open-framework cadmium succinates of different dimensionalities

Open-framework cadmium succinates, [CN(3)H(6)](2)[Cd(2)(C(4)H(4)O(4))(Cl)(2)], I; [CN(3)H(6)](2)[Cd(C(4)H(4)O(4))(2)], II; Cd(2)(C(4)H(4)O(4))(2)(C(4)N(2)H(8))(H(2)O)(3), III; [C(4)N(2)H(12)][Cd(2)(C(4)H(4)O(4))(3)].4H(2)O, IV; Cd(C(4)H(4)O(4))(H(2)O)(2), V; and Cd(3)(C(4)H(4)O(4))(2)(OH)(2)], VI, of different dimensionalities have been synthesized by hydrothermal procedure by employing two different strategies, one involving the reaction of Cd salts with organic-amine succinates and the other involving the hydrothermal reaction of Cd salts with a mixture of succinic acid and the organic amine. While the latter procedure yields structures without any amine in them, the former gives rise to amine templated cadmium succinates with open architectures. By employing guanidinium succinate we have obtained I and II, and with piperazinium succinate we obtained III and IV. Of these I has a one-dimensional chain structure, IV has a layered structure, and II and III have three-dimensional architectures. The two cadmium succinates without incorporation of amine, V and VI, possess layered and three-dimensional structures, respectively. The three-dimensional structures II and III exhibit interpenetration similar to that in diamondoid and alpha-polonium type structures, respectively.     

Metallacycloalkanes : II. Reactions of α,α′-bipyridyl-5-nickela-3,3,7,7-tetramethyl-trans-tricyclo[4.1.0.02,4]heptane

The title compound (II) underwent reductive elimination on treatment with maleic anhydride, tetracyanoethylene or triphenylphosphite to give 3,3,6,6,-tetramethyl-trans-tricyclo[3.1.0.0^2,4]hexane (III). With triphenylphosphite bi(2,2-dimethylcyclopropyl) (V) and 1-(2,2-dimethylcyclopropyl)-3-methyl-1,3-butadiene (VI) were also formed. Acidolysis of II with either HCl, malonic acid or methanol gave V. An intermediate complex α,α′-bipyridyl(phenoxy)-3-nickel-1,1′-bi-(2,2′-dimethylcyclopropyl) (VIII) was isolated by reaction of II with phenol. Methylene dibromide reacts with II to give III and 3,3,7,7-tetramethyl-trans-tricyclo[4.1.0.0^2,4]heptane (IV). With triethylaluminum and II complete exchange of the alkyl groups occurred and V was released on hydrolysis. Trifluoroborane diethyl ether and II gave 3,3,6,6-tetramethylcyclohexa-1,4-diene in a rearrangement-displacement reaction. The cyclodimerisation of 3,3-dimethylcyclopropene (I) to III catalysed by II and the fact that II can be recovered from the reaction mixture provides strong evidence for the intermediacy of metallacyclopentanes in these transition-metal-catalysed [2π + 2π] cyclo-additions.     

Reactions of tetrafluoroethylene oligomers. Part 1. Some pyrolytic reactions of the pentamer and hexaher and of the fluorine adducts of the tetramer and pentamer

Pyrolyses of these highly branched fluorocarbons over glass beads caused the preferential thermolyses of CC bonds where there is maximum carbon substitution. Fluorinations of perfluoro-3,4-dimethylhex-3-ene (tetramer) (I) and perfluoro-4-ethyl-3,4-dimethylhex- 2-ehe (pentamer) (II) over cobalt (III) fluoride at 230° and 145° respectively afforded the corresponding saturated fluorocarbons (III) and (IV), though II gave principally the saturated tetramer (III) at 250°. Pyrolysis of III alone at 500—520° gave perfluoro-2-methylbutane (V), whilst pyrolysis of III in the presence of bromine or toluene afforded 2-bromononafluorobutane (VI) and 2H-nonafluorobutane (VII) respectively. Pyrolysis of perfluoro-3-ethyl-3, 4-dimethylhexane (IV) alone gave a mixture of perfluoro-2-methylbutane (V), perfluoro-2-methylbut-1-ene (VIII), perfluoro-3-methylpentane (IX), perfluoro-3,3-dimethylpentane (X), and perfluoro-3,4- dimethylhexane (III). Pyrolysis of IV in the presence of bromine gave (VI) and 3-bromo-3-trifluoromethyl-decafluoropentane (XI): with toluene, pyrolysis gare VlI and 3H-3-trifluoromethyldecafluoropentane (XII). Pyrolysis of II at 500° over glass gave perfluoro-1,2,3-trimethylcyclobutene (XIII) and perfluoro-2,3-dimethylpenta-1,3(E)- and (Z)-diene (XIV) and (XV) respectively. The diene mixture (XIV and XV) was fluorinated with CoF₃ to give perfluoro-2,3-dimethylpentane (XVI) and was cyclised thermally to give the cyclobutene (XIII). Pyrolysis of perfluoro-2- (1′-ethyl-1′-methylpropyl)-3-methylpent-1-ene (XVII) (TFE hexamer major isomer) at 500° gave perfluoro-1-methyl-2-(1′-methylpropyl)cyclobut-1-ene (XVIII) and perfluoro-2-methyl-2-(1′-methylpropyl)buta-1,3-diene (XIX). Fluorination of XVIII over CoF₃ gave perfluoro-1-methyl-2- (1′-methylpropyl)cyclobutane (XX), which on co-pyrolysis with bromine gave VI. XIX on heating gave XVIII. Reaction of XVIII with ammonia in ether gave a mixture of E and Z 1′-trifluoromethyl-2-(1′-trifluoromethyl- pentafluoropropyliden-1′-yl)tetrafluorocyclobutylamine (XXI) which on diazotisation and hydrolysis afforded 2-(2′trifluoromethyl- tetrafluorocyclobut-1-en-1′-yl)-octafluorobutan-2-ol (XXII).     

Efficiency and application of poly(acryldinitrophenylamidrazone-dinitroacrylphenylhydrazine) chelating fiber for pre-concentrating and separating trace Au(III), Ru(III), In(III), Bi(III), Zr(IV), V(V), Ga(III) and Ti(IV) from solution samples

Poly(acryldinitrophenylamidrazone-dinitroacrylphenylhydrazine) chelating fiber was synthesized from polyacrylonitrile fiber and used for enrichment and separation for traces of Au(III), Ru(III), In(III), Bi(III), Zr(IV), V(V), Ga(III) and Ti(IV) ions from solution samples. The acidity, rate, re-use, capacity and interference on the adsorption of ions on the chelating fiber as well as the conditions of desorption of these ions from the chelating fiber were investigated by means of inductively coupled plasma optical emission spectrometry. The results show that 10-100 ngml(-1) of Au(III), Ru(III), In(III), Bi(III), Zr(IV), V(V), Ga(III) and Ti(IV) ions can be quantitatively enriched by the chelating fiber at a 2 mlmin(-1) of flow rate in the range pH 4-5, and desorbed quantitatively with 20 ml of 5 M HCl for In(III), Bi(III), Zr(IV), V(V), Ga(III), Ti(IV) and 20 ml of 4 M HCl+2% CS(NH(2))(2) solution for Au(III), Ru(III) (with recovery>95%). 50- to 500- fold excesses of Fe(III), Al(III), Mg(II), Mn(II), Ca(II), Cu(II), Ni(II) ions cause little interference in the concentration and determination of analyzed ions. When the fiber was reused for 8 times, the recoveries of the above ions enriched by the fiber were still over 87%. The relative standard deviations (RSDs) for the enrichment and determination of 10 ngml(-1) Au, Ru, In, Bi, Ga and 1 ngml(-1) Zr, V, Ti were lower than 3.0%. The results obtained for these ions in real solution samples by this method were basically in agreement with the given values with average errors of less than 6.3%. FT-IR spectra show that existence of NNCNHNH, OCNHNH and NO(2) functional groups are verified in chelating fiber, and Au(III) or Ru(III) is mainly combined with nitrogen (or oxygen) of the groups to form a chelate complex.     

Tunable DNA photocleavage by an acridine-imidazole conjugate

We report the synthesis and characterization of photonucleases N,N'-bis[2-[bis(1H-imidazol-4-ylmethyl)amino]ethyl]-3,6-acridinediamine (7) and N-[2-[bis(1H-imidazol-4-ylmethyl)amino]ethyl]-3,6-acridinediamine (10), consisting of a central 3,6-acridinediamine chromophore attached to 4 and 2 metal-coordinating imidazole rings, respectively. In DNA reactions employing 16 metal salts, photocleavage of pUC19 plasmid is markedly enhanced when compound 7 is irradiated in the presence of either Hg(II), Fe(III), Cd(II), Zn(II), V(V), or Pb(II) (low-intensity visible light, pH 7.0, 22 degrees C, 8-50 microM 7). We also show that DNA photocleavage by 7 can be modulated by modifying buffer type and pH. Evidence of metal complex formation is provided by EDTA experiments and by NMR and electrospray ionization mass spectral data. Sodium azide, sodium benzoate, superoxide dismutase, and catalase indicate the involvement of type I and II photochemical processes in the metal-assisted DNA photocleavage reactions. Thermal melting studies show that compound 7 increases the Tm of calf thymus DNA by 10 +/- 1 degrees C at pH 7.0 and that the Tm is further increased upon the addition of either Hg(II), Cd(II), Zn(II), or Pb(II). In the case of Fe(III) and V(V), a colorimetric assay demonstrates that compound 7 sensitizes one electron photoreduction of these metals to Fe(II) and V(IV), likely accelerating the production of type I reactive oxygen species. Our data collectively indicate that buffer, pH, Hg(II), Fe(III), Cd(II), Zn(II), V(V), Pb(II), and light can be used to "tune" DNA cleavage by compound 7 under physiologically relevant conditions. The 3,6-acridinediamine acridine orange has demonstrated great promise for use as a photosensitizer in photodynamic therapy. In view of the distribution of iron in living cells, compound 7 and other metal-binding acridine-based photonucleases should be expected to demonstrate excellent photodynamic action in vivo.     

Crystal structure of cobalt(II) complexes with imidazoline nitroxide

The crystal structures of Co(II) coordination compounds CoL ₂-α modification (I), CoL₂(CH₃OH)₂ (II), and CoL₂Py₂(III) — where L is a stable nitroxide 4-(3′,3′,3′-trifluoro-2′-oxypropylene)-2,2,5,5-tetramethyl-3-imidazoline-l-oxyl (L), were determined. It was found that the tetrahedral surroundings of cobalt in I consist of the O and N donor atoms of the deprotonated enaminoketone groups of L. In II and III, the same atoms form the equatorial plane of the centrosymmetric octahedral environment of the central atom in which the axial positions are occupied by the methanol O atoms or the pyridine N donor atoms. In the octahedral coordination centers of II and III, the Co-O and Co-N distances exceed analogous distances in the tetrahedral coordination center of I, substantially increasing the chelate angle in I compared to II and III. In I, the Co-O and Co-N bond lengths and the OCoN chelate angles are, respectively, 1.921(4), 2.006(4) Å, 93.6(2)° in II, 2.014(4), 2.177(4), Co-O_OH 2.146(4) Å, 86.9(2)° in the two crystallographically independent molecules of III, 2.031(2) and 2.022(2), 2.170(2) and 2.193(2), Co-N_Py 2.213(2) and 2.219(2)Å, 87.04(7) and 87.20(7)°. Compounds I and III are molecular. Compound II in the solid state has a layered polymer structure due to hydrogen bonding between the O atoms of the nitroxyl groups of L and the O atoms of the coordinated alcohol molecules.     

Heterogeneous reactions of solid nickel(II) complexes XXIV

The Stoichiometry of thermal decomposition was studied for the following compounds: Ni(NCS)₂(pip)₄ (I), (pip=piperidine), Ni(NCS)₂(pip)₂py·H₂O (II), (py=piridine), Ni(NCS)₂(4-Mepip)₃ (III), Ni(NCS)₂(3-Mepip)₃ (IV) and Ni(NCS)₂(3.5-Me₂pip)₃ (V). In complexes I, II, III and IV the loss of the volatile ligands (on the TG curve to 300 °C) occurs in three steps and in complex V in two steps. The loss of the last molecules of volatile ligands is accompanied by the decomposition of NCS groups. Spectral data and magnetic moment values for the initial complexes I and II (together with the defined intermediates) indicated pseudooctahedral configuration while pentacoordination for complexes III, IV and V. Structural changes of the complexes studied in thermal decomposition reactions are discussed.     

Redox reactions of V(III) and Cr(III)picolinate complexes in aqueous solutions

Reactions of e_aq⁻, H-atoms, OH, (CH₃)₂COH, and CO₂⁻ radicals with V(III)picolinate and Cr(III)picolinate have been studied by the pulse radiolysis technique. The spectra of V(II)picolinate, V(IV)picolinate, Cr(II)picolinate, OH adduct of Cr(III)picolinate and Cr(IV)picolinate have been obtained and the rate constants of the reactions of various radicals with V(III) and Cr(III)picolinate have been determined. The implications of these results to the chemical decontamination of nuclear reactor systems are discussed.