Ultraviolet grafting of methacrylic acid and acrylic acid on high‐density polyethylene in different solvents and the wettability of grafted high‐density polyethylene. I. Grafting

Methacrylic acid (MAA) and acrylic acid (AA) were grafted onto high‐density polyethylene (PE) with UV initiation and a range of solvents. With acetone as the solvent, MAA was more easily grafted onto PE when the photoinitiator benzophenone was precoated on PE than when it was dissolved in the monomer solution. The grafting was faster in aliphatic solvents than in polar solvents or a UV‐adsorbing aromatic solvent (toluene). Acetone itself could initiate the photografting of both MAA and AA onto PE when it was mixed with water. The extent of grafting of MAA onto PE showed a maximum when there was about 40% acetone in the mixture. For AA, when the acetone/water concentration was 10%, the extent of grafting increased rapidly with the irradiation time. At higher acetone concentrations, the extent of grafting was low. Atomic force microscopy images showed that the surface topography of PE grafted with MAA in acetone/water was quite different from that obtained when the grafting was performed in other organic solvents. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 253–262, 2004     

Mechanism of preparing monodisperse poly(acrylamide/methacrylic acid) microspheres in ethanol. I

The precipitation polymerization of acrylamide/methacrylic acid (AAm/MAA) in ethanol (EtOH) was thoroughly investigated from detecting the homogeneity of the initial solution prior to polymerizations to the final products of the polymerizations. Dynamic light scattering and scanning electron microscopy were employed for the investigations. The solutions of AAm and AAm/acrylic acid (AAm/AA) were homogeneous. However, the solutions of AAm/MAA, AAm/poly(MAA) (PMAA), and AAm/poly(AA) (PAA) were not homogeneous as they are usually considered to be: entities with size distributions of around 150, 40, and 17 nm, respectively, were detected at the polymerization temperature of 60 °C. Accordingly, analogous to the entities that are similar to the structure of micelles formed in the solutions of AAm/PMAA and AAm/PAA because of polymer–AAm interactions, it was suggested that the complexes of AAm/MAA stemming from the molecular interactions, particularly the (lypo‐) hydrophobic interaction, aggregated to form minimonomer droplets at 60 °C. The monodisperse microspheres were prepared only in the AAm/MAA‐EtOH systems, whereas the microspheres were not prepared in the homogeneous AAm‐EtOH systems despite the precipitation of PAAm. The results obtained from various polymerizations showed that the microspheres originated from the polymerization within the minimonomer droplets. A new mechanism was established that describes the processes for the formation of all products possibly generated in the AAm‐MAA‐EtOH polymerization system. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2823–2832, 2004     

Study on soap‐free P(MMA‐EA‐AA or MAA) latex particles with narrow size distribution

Soap‐free poly(methyl methacrylate‐ethyl acrylate‐acrylic acid or methacrylic acid) [P(MMA‐EA‐AA or MAA)] particles with narrow size distribution were synthesized by seeded emulsion polymerization of methyl methacrylate (MMA), ethyl acrylate (EA) and acrylic acid (AA) or methacrylic acid (MAA), and the influences of the mass ratio of core/shell monomers used in the two stages of polymerization ([C/S]_w) and initiator amount on polymerization, particle size and its distribution were investigated by using different monomer addition modes. Results showed that when the batch swelling method was used, the monomer conversion was more than 96.0% and particle size distribution was narrow, and the particle size increased first and then remained almost unchanged at around 600 nm with the [C/S]_w decreased. When the drop‐wise addition method was used, the monomer conversion decreased slightly with [C/S]_w decreased, and large particles more than 750 nm in diameter can be obtained; with the initiator amount increased, the particle size decreased and the monomer conversion had a trend to increase; the particle size distribution was broader and the number of new particles was more in the AA system than in the MAA system; but the AA system was more stable than the MAA system at both low and high initiator amount. Copyright © 2006 John Wiley & Sons, Ltd.     

Frontal polymerizations carried out in Deep-Eutectic mixtures providing both the monomers and the polymerization medium

Deep Eutectic Solvents (DESs) based upon mixtures of Acrylic Acid (AA) or Methacrylic Acid (MAA) and Choline Chloride (CCl) demonstrated superior performance than regular organic solvents and even ionic liquids for frontal polymerizations (FPs). Full recovering of CCl after FP provided an interesting green character to the process.     

Supramolecular organogels formed by monochain derivatives of succinic acid

The monoalkyl chain derivatives of succinic acid self-assemble into ordered bilayer aggregates by forming dimers of hydrogen bonded carboxylic acid in a number of organic solvents and finally gelatinize the solvents. The gelation ability of each derivative was inspected. The morphologies of xerogels were investigated by scanning electron microscope (SEM). The microstructure of aggregates was studied by small angle X-ray diffraction (SA-XRD) and Fourier transform infrared spectroscopy (FT-IR). The results reveal that the intermolecular hydrogen bonds between neighboring molecules are critical factor in the process of organogelation.     

Synthesis and evaluation of new lipomonosaccharide-imprinted polymers as MISPE supports

Molecular imprinted polymers (MIP) were prepared by the copolymerization of styrene (S) or methyl methacrylate (MMA) and methacrylic acid (MAA) using ethylene glycol dimethacrylate (EGDMA) as the crosslinker with molar ratios of [monomer]/[crosslinker] and [MAA]/[template] of 3:7 (to obtain a rigid structure) and 1:6 (to optimise hydrogen interactions), respectively. The polymerizations occurred in presence of the template molecule (MIP) - GlcNcouma - an amphiphilic monosaccharide. The same materials, non-imprinted polymers (NIP), were also prepared in absence of the template. These MIPs were characterized and used as SPE supports for selective enrichment. The results showed the correlation between retention efficiency and the porogen character of the polymerization solvent.     

对苯二胺分子印迹聚合物的分子识别特性

以对苯二胺(p-PD)为模板分子,分别以甲基丙烯酸(MAA)和丙烯酰胺(AA)为功能单体,制备了p-PD的印迹聚合物P(MAA)和P(AA),采用色谱法考察了其分子识别特性。结果表明,P(AA)对p-PD无明显的印迹效应;而甲醇为流动相时,P(MAA)能够选择性结合p-PD分子(k′=3.57),对p-PD有显著的印迹效应(印迹因子IF=2.95),P(MAA)柱可以实现p-PD与邻苯二胺(o-PD)和对氨基苯甲酸(p-ABA)的色谱分离。通过光谱实验及HF/6-31G*量化理论计算方法,对比研究了p-PD与MAA和AA之间的相互作用。MAA与p-PD能够形成更稳定的复合物,P(MAA)对p-PD具有更好的分子识别能力。研究表明紫外吸收光谱法和荧光光谱法以及量子化学理论计算法可作为功能单体筛选的有效手段;对于荧光模板分子,荧光光谱法具有简便、灵敏等特点。     

On the origin of ionic liquid‐induced variations in hydroxypropyl methacrylate propagation rate coefficients

Pulsed laser polymerizations were used to study the propagation kinetics of hydroxypropyl methacrylate (HPMA) in ionic liquids (ILs) and common organic solvents. The functional monomer was chosen to investigate the complex interplay of all interactions between monomer molecules and between monomer and solvent molecules and to obtain a deeper understanding of the impact of these interactions. The solvent effect on the HPMA propagation rate coefficient (k_p) was examined using a linear solvation energy relationship (LSER) based on Kamlet‐Taft solvatochromic parameters π*, α, and β. The results suggest that dipolarity/polarizability, associated with π*, and hydrogen bond–donating ability of the solvents, accounted for by α, majorly contribute to variations in k_p. Hydrogen bond–accepting (electron pair donating) ability of the solvents (β parameter) is of much lesser importance. In addition, LSER enables the prediction of HPMA k_p based on solvatochromic parameters of the solvents. The results suggest that interactions between the hydroxyl group of the monomer and the anion are dominant compared with classical hydrogen bonding between carbonyl and hydroxyl groups of the monomer units. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3188–3199, 2010     

A photophysical study of the α-carboline (1-azacarbazole) aggregation process

This paper reports a comprehensive photophysical study of the aggregation process of 1-azacarbazole, or α-carboline (9H-pyrido[2,3-b]indole), AC, in low polar aprotic solvents by using absorption, steady state and time-resolved fluorescence spectroscopic techniques. To ascertain the characteristics of the aggregation process we have studied the changes produced by the increase of the AC concentration and the decrease of the temperature on the absorption and fluorescence spectra of the AC monomer. Previously, to aid the interpretation of these results, the hydrogen bonding interactions of the AC monomer with pyridine, PY, and indole, IND, have been also analyzed. The results obtained from these studies reveal that, under our experimental conditions, AC does not form doubly hydrogen bonded cyclic dimers, (AC)(2), but singly hydrogen bonded open dimers, AC-AC, and open higher aggregates, (-AC-)(n). The formation of these species shifts to the red the absorption spectrum of the AC monomer and quenches its fluorescence.     

Anionic amphiphilic end‐linked conetworks by the combination of quasiliving carbocationic and group transfer polymerizations

A series of amphiphilic end‐linked conetworks was synthesized by the combination of two “quasiliving” polymerization techniques, quasiliving carbocationic (QLCCP) and group transfer polymerizations (GTP). The hydrophobic monomer was polyisobutylene methacrylate synthesized by the QLCCP of isobutylene and subsequent terminal modification reactions. The hydrophilic monomer was methacrylic acid (MAA) introduced via the polymerization of 2‐tetrahydropyranyl methacrylate followed by acid hydrolysis after (co)network formation. The conetwork syntheses were performed by sequential monomer/crosslinker additions under GTP conditions. All the precursors and the extractables from the conetworks were characterized by gel permeation chromatography and ¹H NMR. The resulting polymer conetworks were investigated in terms of their degree of swelling (DS) in aqueous media and in tetrahydrofuran (THF) over the whole range of ionization of the MAA units and in n‐hexane for uncharged conetworks. The DSs in water increased with the degree of ionization (DI) of the MAA units and the hydrophilic content in the conetwork, whereas the DSs in THF increased with the reduction of the DI of the MAA units. The effective pK of the MAA units in the conetworks increased from 8.4 to 10.5 with decreasing MAA content. These findings can facilitate the design of similar unique conetworks with adjustable swelling behavior and composition‐dependent pK values. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4289–4301, 2009     

Coupling of intramolecular hydrogen bonding to the cis-to-trans isomerization of a proline imide bond of small model peptides

A relationship between intramolecular hydrogen bonding and the cis-trans isomerization of a proline imide bond for proline-containing short peptides were studied by proton NMR and infrared spectroscopy using DMSO-d6/CDCl3 mixed solvents. The percentage of the trans form increases with increasing fraction of CDCl3 in the mixed solvents except for compounds without possibility of intramolecular hydrogen bonding. Chemical shift variations of amide protons with solvent mixing ratios were found to be useful for judging whether the amide protons take part in the intramolecular hydrogen bonding to a considerable degree or not. These results and infrared spectra were used to specify intramolecularly hydrogen bonded structures of the peptides. Formation of the 10-membered or 13-membered hydrogen bonded ring which includes the carbonyl group precedent to the prolyl residue facilitates the cis-to-trans isomerization and these hydrogen bonded rings are strong enough to restrict the proline imide bond to the trans form in CDCl3 solution. On the other hand, a 7-membered hydrogen bonded ring is not so effective in restricting the proline imide bond.     

Molecularly imprinted polymer membranes for substance-selective solid-phase extraction from water by surface photo-grafting polymerization

Hydrophilized polyvinylidene fluoride microfiltration membranes were surface-modified in the presence of a template (terbumeton) in methanol with a graft copolymer of a functional monomer (2-acrylamido-2-methyl-1-propane sulfonic acid, AMPS, methacrylic acid, MAA, or acrylic acid, AA) and a cross-linker (N,N'-methylene-bis-acrylamide) using UV irradiation and benzophenone as photoinitiator. As result, membranes covered with a thin layer of imprinted polymer selective to terbumeton were obtained. Blank membranes were prepared with the same monomer composition, but in the absence of the template. The membranes' capacity to adsorb terbumetone from aqueous solution was evaluated yielding information regarding the effect of polymer synthesis (type and concentration of functional monomer, concentration of cross-linker) on the resulting membranes' recognition properties. UV spectroscopic studies of the interactions with terbumetone revealed that AMPS forms a stronger complex than MAA and AA. In agreement with that finding, imprinting with AMPS gave higher affinities than with MAA and AA. The terbumeton-imprinted membranes showed significantly higher sorption capability to this herbicide than to similar compounds (atrazine, desmetryn, metribuzine). With the novel surface modification technology, the low non-specific binding properties of the hydrophilized microfiltration membrane could successfully be combined with the receptor properties of molecular imprints, yielding substance-specific molecularly imprinted polymer composite membranes. The high affinity of these synthetic affinity membranes to triazine herbicides together with their straightforward and inexpensive preparation provides a good basis for the development of applications of imprinted polymers in separation processes such as solid-phase extraction.     

Origins of the solvent effect on the propagation kinetics of acrylic acid and methacrylic acid

In this study, the relative rate of polymerization of acrylic acid (AA) versus methacrylic acid (MAA) and the effect of water on the polymerization kinetics are investigated within a combined static and molecular dynamics set of computational tools. Experimentally the relative rate of propagation of AA versus MAA is around 35 in bulk and 31 in water. Classical Molecular Dynamics calculations have been carried out to determine the location of the solvent molecules in the proximity of the dimeric poly(AA) and poly(MAA) units. A combined implicit/explicit solvent model was used for the evaluation of the kinetics of the dimeric polymer chains. We show that the rate acceleration of both polymers in water is mainly due to entropic rather than electrostatic effects and is in agreement with experimental findings. Moreover the slower propagation rate of MAA versus AA is ascribed to additional steric effects present in MAA due to the methyl group at the α position of the monomer. Among the functionals used, the M06‐2X/6‐311+G(3df,2p)//B3LYP/6‐31+G(d) methodology reproduces the experimental rate constants quantitatively the best. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Graft copolymers obtained by radiation grafting of methacrylic acid onto polypropylene films

Direct radiation grafting of methacrylic acid (MAA) onto polypropylene films (PP) was studied. The effect of different solvents such as benzene, distilled water, dimethyl formamide, isopropanol, isopropanol/water-mixture, on the swelling and the grafting process of MAA onto (PP) films was investigated. It was found that the grafting process was enhanced under vacuum irradiation in benzene as a diluent for MAA as compared with other solvents examined. The dependence of the grafting rate on such monomer concentrations was found to be 1.2 order. The relationship between the grafting rate and film thickness gave a negative first order dependence. This grafting system proceeded by a diffusion controlled process. Some selected properties of the grafted films such as mechanical and electrical properties, swelling behaviour, and gel determination, were also investigated.     

L-卡尼丁分子压印聚合物作为手性分离色谱固定相的研究

以L－卡尼丁为模板分子，分别以α－甲基丙烯酸和丙烯酰胺为功能单体，乙二醇二甲基丙烯酸酯为 剂，采用分子压印技术合成了对L－卡尼丁具有高选择性的分子压印聚合物。将所得聚合物用作高效液相色谱固定相，研究了它们对外消旋卡尼丁盐酸盐的拆分能力，分析结果表明，α－甲基丙烯酸作为功能单体所得聚合物对外消旋卡尼丁盐酸盐具有良好的拆分作用，其分离因子α为1．89。     

三唑酮分子印迹预组装体系的分子模拟与吸附性能

以三唑酮为模板分子, 以丙烯酰胺(AM)、 丙烯酸(AA)、 甲基丙烯酸(MAA)和三氟甲基丙烯酸(TFMAA)为功能单体预组装了分子印迹聚合物体系, 采用半经验法和从头算法, 利用Hyperchem软件模拟了三唑酮与4种功能单体所组成的分子印迹预组装体系的构型、 能量、 反应配比及复合反应的结合能, 选择复合物结合能最高的功能单体用于分子印迹聚合物的合成. 采用密度泛函方法计算了模板与单体在不同致孔剂中的溶剂化能. 结果表明, 三唑酮与三氟甲基丙烯酸所形成复合物的作用力最强, 在非极性溶剂中溶剂化能最弱. 由预组装体系的差示紫外光谱法研究发现, 一分子三唑酮可与两分子三氟甲基丙烯酸在氯仿中形成氢键复合物, 与分子模拟的结果一致. 在最佳模拟条件下, 合成了三唑酮的印迹聚合物, 利用吸附等温线Langmuir和Freundlich模型研究了印迹聚合物的吸附行为及识别机理. 上述方法对于分子印迹体系的筛选及分子印迹聚合物性能的预测有重要的意义.     

Self‐Initiated Photopolymerization and Photografting of Acrylic Monomers

Summary: This work demonstrates that acrylic acid (AA), glycidyl acrylate (GA) and several other acrylic monomers can be photopolymerized and photografted onto high‐density polyethylene (HDPE) by self‐initiation. The self‐initiation mechanism of these acrylic monomers is possibly by an excitation of the monomer to a triplet state (T₃) with enough energy to abstract hydrogen from the polymer substrate and initiate the grafting.

Grafting conversion of acrylic acid (AA), methacrylic acid (MAA), 2‐hydroxyethyl acrylate (HEA), glycidyl acrylate (GA), 2‐hydroxyethyl methacrylate (HEMA) and poly(ethylene glycol) methacrylate (PEGMA) as a function of irradiation time.     

Influence of the solvents on the γ-ray polymerization of acrylic acid. II.

The presence of plurimolecular H-bonded aggregates in the acrylic acid allows the polymer to involve some stereoregular sequences. This effect is made easier when some polymer is already formed in the reacting medium: the aggregates are stabilized by hydrogen bonds with the polymer which gives rise to a matrix effect. Two groups of solvents have been characterized by examination of the monomer's association forms in solution. In a first group of solvents (methanol–dioxan–water), the aggregates are maintained and reinforced; in the second one, acrylic acid exists only as cyclic dimers (hydrocarbons–chlorinated solvents). The difference between the association forms of the monomer involves some important modifications on the kinetics of polymerization and the structure of the obtained polymers. In the solvents of the first group, the obtained polymers are crystallizable and may involve syndiotactic sequences, while in the presence of the solvents of the second group no crystallization or stereoregularity of the polymer can occur. A very close correlation is thus found between the aggregated structure of the monomer, the polymerization kinetics, and the structure of the polymers.     

Nuclear Magnetic Resonance Study on Hydrogen Bonding of Butyl Alcohols

Nuclear magnetic resonance of hydroxyl proton of four butyl alcohols have been measured as a function of alcohol concentration in carbon tetrachloride solvent. Assuming equilibria among monomer, open-dimer and cyclic dimer for alcohol association, the chemical shifts of the hydroxyl proton both at the bonded state and at the non-bonded state and also the equilibrium constants were determined from the observation at a moderate dilution. The results were tabulated in Table 1 and shown in Fig. 1.     

Preparation and characterization of narrow compositional distribution polyampholytes as potential biomaterials: Copolymers of N-(3-aminopropyl)methacrylamide hydrochloride (APM) and methacrylic acid (MAA)

This article describes the preparation and solution properties of a series of polyampholytes composed of N-(3-aminopropyl)methacrylamide hydrochloride (APM) and methacrylic acid (MAA). In particular, conditions were found where the copolymers could be formed with little or no drift in composition over the course of polymerization to quite high conversions. The compositional drift, common to many copolymerizations, was limited by adjusting the reactivity of MAA through control of its degree of ionization (i.e., pH). As revealed by potentiometric measurements and changes in ¹H NMR spectra, the solution pH drifted over the course of some polymerizations. This was ascribed to changes in the pK_a values of the ammonium and carboxylate groups upon incorporation in the copolymer. The pH drift led to a change in degree of MAA ionization, and hence the relative reactivities of APM and MAA, but this effect could be minimized by using a buffer. Precipitation, which occurred during some polymerizations, could be prevented, in some cases, by the addition of salt or an organic cosolvent. Even in cases where precipitation could not be prevented, it was found that the copolymer was still formed with minimal compositional drift. The solubility of the resulting polyampholytes in aqueous solution was found to depend on their composition, as well as pH, ionic strength and temperature. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 353–365