Behavior of aqueous solutions of polymer star with block copolymer poly(2-ethyl-2-oxazoline) and poly(2-isopropyl-2-oxazoline) arms

Eight-arm star-shaped poly(2-alkyl-2-oxazoline) (M?≈?21,000?g?·?mol^?1) was studied by turbidimetry and light scattering in aqueous solutions within concentration ranging from 0.00038 to 0.0276?g?·?cm^?3. The arms were the block copolymers of poly(2-isopropyl-2-oxazoline) (PiPrOx) and poly(2-ethyl-2-oxazoline) (PEtOx). Calix[8]arene core was connected with poly(2-isopropyl-2-oxazoline). The behavior of investigated polymer differed from that of thermosensitive stars with poly(2-alkyl-2-oxazoline) homopolymer arms. At low temperatures, the aggregates were formed due to interaction of hydrophobic cores. The phase separation temperatures T₁ and T₂ of studied star were higher than those for star-shaped poly(2-isopropyl-2-oxazoline) and lower than for poly(2-ethyl-2-oxazoline). T₁ and T₂ increased with dilution.     

Novel amphiphilic linear polymer/dendrimer block copolymer: Synthesis of poly(2-methyl-2-oxazoline)-block-poly(amido amine) dendrimer

Novel linear polymer/dendrimer block copolymers, poly(2-methyl-2-oxazoline)-block-poly(amido amine) dendrimers (water-soluble full-generation type 4 (G = 4.0 and 5.0) and amphiphilic half-generation type 5 (G = 3.5, 4.5, and 5.5)), were synthesized by divergent-growth dendrimer construction with ω-ethylenediamine-terminated poly(2-methyl-2-oxazoline), which was prepared by living ring-opening polymerization of 2-methyl-2-oxazoline. Assembly of the amphiphilic dendrimer-based block copolymer (G = 5.5) was investigated by surface tension measurements (critical micelle concentration, 0.49 wt.-%) and by small-angle neutron scattering analysis (spherical particles; assembled number, ca. 10³).     

Ring-transformation of 1,2,4-oxadiazines. Raney nickel hydrogenation of Z-3-aryl-5,6-dihydro-5-(substituted)methylene-4H-1,2,4-oxadiazine derivatives

Raney nickel hydrogenation of Z-3-aryl-5-(ethoxycarbonyl)methylene-5,6-dihydro-4H-1,2,4-oxadiazine ( 1a-c ) affords 2-aryl-6-hydroxymethyl-4-pyrimidinone ( 2 ) and ethyl (2-aryl-4-oxazolyl)acetate ( 3 ). A similar hydrogenation of Z-5-arylcarbarnoyl)methylene-5,6-dihydro-3-phenyl-4H-1,2,4-oxadiazine ( 1d-f ) gives E-4-(arylcarbamoyl)methylene-2-phenyl-2-oxazoline ( 5 ), 4-(arylcarbamoyl)methyl-2-phenyloxazole ( 6 ), and Z-4-(aryl-carbamoyl)methylene-2-phenyl-2-oxazoline ( 7 ).     

Photoinduzierte 1, 3-dipolare Cycloaddition von 3-Phenyl-2H-azirinen an Azodicarbonsäure-diäthylester. 32. Mitteilung über Photoreaktionen

Irradiation of 2, 2-dimethyl-3-phenyl- ( 1a ), 2, 3-diphenyl-2H-azirine ( 1b ) or the azirine-precursors 1-azido-1-phenyl-propene ( 2a ) and 1-azido-1-phenyl-ethylene ( 2b ), respectively, in benzene in the presence of azodicarboxylic acid diethylester, yields the corresponding 1, 2-carbethoxy-3-phenyl-Δ³-1, 2, 4-triazolines 4a–d (Scheme 1). Refluxing 4 ( a, c or d ) in 0, 2–0, 4M aqueous ethanolic potassium hydroxide leads to the formation of the 1-carbethoxy-3-phenyl-Δ²-1, 2, 4-triazolines 6 ( a, c or d ). Under the same conditions 4b is converted to 3, 5-diphenyl-1, 2, 4-triazole ( 7b , Scheme 2). In 10M aqueous potassium hydroxide solution heating of either 4 ( c or d ) or 6 ( c or d ) yields the 3-phenyl-1, 2, 4-triazoles 7 ( c or d ). Photolysis of 1-carbethoxy-5, 5-dimethyl-3-phenyl-Δ²-1, 2, 4-triazoline ( 6a ) in benzene in the presence of oxygen and trifluoroacetic acid methylester gives the 5-methoxy-2, 2-dimethyl-4-phenyl-5-trifluoromethyl-3-oxazoline ( 13 , Scheme 5). 5, 5-Dimethyl-3-phenyl-1, 2, 4-triazole seems to be the intermediate, which on losing nitrogen gives the benzonitrile-isopropylide ( 3a ).     

Copper(II) [(4-methylphenyl)sulfonyl]-1H-imino-(2-phenyl-2-oxazoline) complexes

Neutral copper complexes of the deprotonated [(4-methylphenyl)sulfonyl]-1H-imino-(2-phenyl-2-oxazoline) proligands, [HTs-ROz], R = H, 5-Me, 4-Me, 4-Et, 4-ⁱPr, have been prepared by electrochemical oxidation of anodic copper in an MeCN solution of the corresponding proligand. The [Cu(Ts-ROz)₂] complexes were characterised by microanalysis, i.r. and electronic spectroscopies, and by e.p.r. and magnetic measurements. The crystal structures of HTs-5MeOz, [Cu(Ts-Oz)₂], [Cu(Ts-5MeOz)₂] and [Cu(Ts-4MeOz)₂] were determined by X-ray diffraction.     

Photochemische Cycloadditionen von 3-Phenyl-2H-azirinen an Carbonsäurechloride. 35. Mitteilung über Photoreaktionen

Irradiation of 2, 3-diphenyl-2H-azirine ( 1a ) and 1-azido-1-phenyl-propene, the precursor of 2-methyl-3-phenyl-2H-azirine ( 1b ), in benzene, with a high pressure mercury lamp (pyrex filter) in the presence of acid chlorides yields the oxazoles 5a–d (Scheme 2). Photolysis of 2, 2-dimethyl-3-phenyl-2H-azirine ( 1c ) under the same conditions gives after methanolysis the 5-methoxy-2, 2-dimethyl-4-phenyl-3-oxazolines 7a, b, d , while hydrolysis of the reaction mixture leads to the formation of the 1, 2-diketones 8a, c, d (Scheme 4). The suggested reaction path for all these reactions is a 1, 3-dipolar cycloaddition of the photochemically generated benzonitrilemethylides 2 to the carbonyl double bond of the acid chlorides to give the intermediates 4 , followed by either elimination of hydrogen chloride or solvolysis (Schemes 2 and 4). Irradiation of 1c in the presence of acetic acid anhydride leads via the intermediate 9 to the 5-hydroxy-3-oxazoline 10 and the 5-methylidene-3-oxazoline 11 (Scheme 5).     

New synthesis of secondary carboxamide by using 2-methyl-2-oxazoline as a building block

New method for the synthesis of secondary carboxamides of type, R²NHCOR¹, which utilizes 2-methyl-2-oxazoline as a carboxamide building block and various halides, R²X, has been developed.     

Synthesis of thermo- and pH-sensitive star-shaped poly(2-alkyl-2-oxazoline) and its properties in aqueous its properties in aqueous solutions with varying medium acidity

Abstract

pH-sensitive eight-arm star-shaped polymer with calix[8]arene core and block copolymer of poly(2-methoxycarbonylethyl-2-oxazoline) and poly(2-isopropyl-2-oxazoline) arms was synthesized for the first time. The block composition was 1:1 and molar mass was 24000?g?mol^?1. The behavior of synthesized star in aqueous solutions was analyzed by turbidity and light scattering at the pH values from 2 to 12.2. It is shown that in an organic solvent, the polymer molecule has a low shaped asymmetry. In aqueous solutions, the synthesized star exhibits thermosensitivity with a lower critical solution temperature. It was found that at low temperature in solutions, there were macromolecules and aggregates which were formed due to interaction of hydrophobic cores. The phase separation temperatures did not depend on pH in basic media and decreased strongly at pH <5.     

FORMATION OF 2-PYRIDINYL-2-OXAZOLINES AND PYRIDINE-2-CARBOXAMIDINE IN THE COORDINATION SPHERE OF COPPER(II)

Abstract

The reaction of pyridine-2-carbonitrile (2-CNpy) with 2-amino-2-hydroxymethyl-1,3-propanediol (L¹) and 2-amino-2-methyl-1-propanol (L²) in methanolic solutions of anhydrous copper(II) chloride at room temperature led to the formation of solid complexes containing 2-(2-pyridinyl)-4,4-bis(hydroxynmethyl)-2-oxazoline (pyoxaL¹) and 2-(2-pyridinyl)-4,4-dimethyl-2-oxazoline (pyoxaL²), respectively. With copper(II) bromide instead of copper(II) chloride, along with the oxazoline complexes, the complex dibromo-bis(pyridine-2-carbox-amidine)copper(II) was isolated. Under several hour reflux, the complexes dihalogenobis(pyridine-2-carboxamidine)copper(II) are the only isolable products both for chloride and bromide starting salts. The stereochemistry of the complexes and the mode of ligand coordination have been determined by spectroscopic and conductometric measurements. The crystal structure of bromobis[(2-(2-pyridinyl)-4,4-dimethyl)-2-oxazoline]copper(II) bromide hydrate was solved by X-ray diffraction techniques. The mechanism of 2-CNpy transformation to the final products is proposed.     

Synthesis of novel glycopeptide-polyoxazoline block copolymers by direct coupling between living anionic and cationic polymerization systems

A novel glycopeptide-containing block copolymer, poly[O-(tetra-O-acetyl-β-D -glucopyranosyl)-L -serine]-block-poly(2-methyl-2-oxazoline) ( 5 ), was synthesized by mutual termination of living polymerizations of a sugar-substituted α-amino acid N-carboxyanhydride (NCA) ( 1 ) and 2-methyl-2-oxazoline ( 3 ). 5 was deacetylated to provide the glycopeptide-polyoxazoline block copolymer, poly[O-(β-D -glucopyranosyl)-L -serine]-block-poly(2-methyl-2-oxazoline) ( 6 ).     

Mononuclear ruthenium complexes containing chiral aminooxazolines: Syntheses, X-ray studies and catalytic activity

The synthesis and characterisation of three novel mononuclear ruthenium(II) complexes containing one of the following chiral auxiliary ligands: 2-amino-(4R)-phenyl-2-oxazoline (amphox), indanyl-2-amino-(4R,5S)-2-oxazoline (aminox) or indanyl-(2′-anilinyl)-(4R,5S)-2-oxazoline (aninox) is described using [Ru₂Cl₄(η⁶-p-cym)₂] (p-cym = 1-isopropyl-4-methylbenzene) as the Ru starting material. The new complexes have been identified as the neutral derivatives [RuCl₂(η⁶-p-cym)(amphox-κ¹N_ox)] (1), [RuCl₂(η⁶-p-cym)(aminox-κ¹N_ox)] (2) and the salt [RuCl(η⁶-p-cym)(aninox-κ²N,N′)]Cl (3). These materials have been fully characterised (elemental analysis, NMR, IR, conductance, MS, etc.) and, in the case of 2 and 3, structurally elucidated in the solid-state using single crystal X-ray diffraction methods. All three complexes show good catalytic activity (max. conversion >99%, TOF = 424 h⁻¹) but only modest enantio-selectivity (max. ee = 40%) for the transfer hydrogenation reaction of acetophenone with isopropyl alcohol. The complexes were also tested in an asymmetric Diels-Alder reaction involving cyclopentadiene and acrolein (max. conversion >99%, TOF = 42 h⁻¹). In this case, the diastereo-selectivity was good to moderate (max. de = 84%), but the ee values were poor (max. ee = 12%).     

Photochemische Synthesen potentiell hypoglykämisch wirkender 3-Oxazoline

Photochemical Syntheses of 3-Oxazolines which Possibly Exhibit Hypoglycemic Activity Reactions of photochemically generated benzonitrile methylides 2 with carbonyl compounds 3 yielded 3-oxazolines of the types 5 and 6 (Scheme 1). Photooxidation of 5-[p-(dimethylamino)phenyl]-2,2-dimethyl-4-phenyl-3-oxazoline ( 5a ) gave 4′-(2,2-dimethyl-4-phenyl-3-oxazolin-5-yl)-N-methylformanilide ( 6r ) which could be transformed to 2,2-dimethyl-5-[p-(methylamino)phenyl]-4-phenyl-3-oxazoline ( 6s ) by photodecarbonylation. Thirty 3-oxazolines of types 5 and 6 have been synthesized and tested by oral and/or intraperitoneal administration to starved rats and obese-hyperglycemic mice.     

Synthesis and characterization of PISOZ-PDMS-PISOZ triblock polymer vesicles

In this project, we synthesized poly(2-isopropyl-2-oxazoline)-block- poly(dimethyl-siloxane)-block-poly(2-isopropyl-2-oxazoline) (PISOZ-PDMS-PISOZ) triblock polymer, which has been prepared as vesicles. The triblock polymer was characterized by ¹H-NMR, F-NMR, LS and TEM. The size of the empty vesicle is about 60 nm. When curcumin was encapsulated into PISOZ-PDMS-PISOZ triblock polymer, formed well defined vesicles in a size about 70 nm.     

Facile Fabrication of Bio- and Dual-Functional Poly(2-oxazoline) Bottle-Brush Brush Surfaces

Poly(2-oxazoline)s (POx) bottle-brush brushes have excellent biocompatible and lubricious properties, which are promising for the functionalization of surfaces for biomedical devices. Herein, a facile synthesis of POx is reported which is based bottle-brush brushes (BBBs) on solid substrates. Initially, backbone brushes of poly(2-isopropenyl-2-oxazoline) (PIPOx) were fabricated via surface initiated Cu⁰ plate-mediated controlled radical polymerization (SI-Cu⁰CRP). Poly(2-methyl-2-oxazoline) (PMeOx) side chains were subsequently grafted from the PIPOx backbone via living cationic ring opening polymerization (LCROP), which result in ≈100 % increase in brush thickness (from 58 to 110 nm). The resultant BBBs shows tunable thickness up to 300 nm and high grafting density (σ) with 0.42 chains nm⁻². The synthetic procedure of POx BBBs can be further simplified by using SI-Cu⁰CRP with POx molecular brush as macromonomer (M_n=536 g mol⁻¹, PDI=1.10), which results in BBBs surface up to 60 nm with well-defined molecular structure. Both procedures are significantly superior to the state-of-art approaches for the synthesis of POx BBBs, which are promising to design bio-functional surfaces.     

Photochemistry of 3-aryl-2-isoxazoline1

3-Phenyl-2-isoxazoline (1) was irradiated to give 4-phenyl-2-oxazoline (3), β-aminoaldehyde (14) and benzonitrile from its π-π^* singlet excited state. Several related derivatives afforded similar photoproducts on irradiation. The quantum yields of the photoreactions were dependent on the magnitudes of the singlet energies of the 2-isoxazolines. p-Cyanophenyl-2-isoxazoline (1c) formed a one-to-one photoadduct (22) with benzene.     

Enantioselective synthesis of the phosphate esters of the immunosuppressive lipid FTY720

The enantiomers of FTY720-phosphate (3) were synthesized via 2-methylene-4-(4-octylphenyl)butan-1-ol (7), 2,3-epoxy alcohol 8, and Δ²-oxazoline 10. These compounds have potential use in the treatment of autoimmune diseases and prevention of kidney transplant rejection.     

Photochemische Cycloadditionen von 3-Phenyl-2H-azirinen mit Benzoyl-, Äthoxycarbonyl- und Vinylphosphonaten 34. Mitteilung über Photoreaktionen

The irradiation of the 3-phenyl-2H-azirines 1a–c in the presence of diethyl benzoylphosphonate ( 8 ) in cyclonexane solution, using a mercury high pressure lamp (pyrex filter), yields the diethyl (4, 5-diphenyl-3-oxazolin-5-yl)-phosphonates 9a–c (Scheme 3). In the case of 1b a mixture of two diastereomeric 3-oxazolines, resulting from a regiospecific but non-stereospecific cycloaddition of the benzonitrile-benzylide dipole 2b to the carbonyl group of the phosphonate 8 , was isolated. Benzonitrile-isopropylide ( 2a ), generated from 2,2-dimethyl-3-phenyl-2H-azirine ( 1a ), undergoes a cycloaddition reaction to the ester-carbonyl group of diethyl ethoxycarbonylphosphonate ( 15 ) with the same regiospecificity to give the 3-oxazoline derivative 16 (Scheme 5). The azirines 1a–c , on irradiation in benzene in the presence of diethyl vinylphosphonate ( 17 ) give non-regiospecifically the Δ¹-pyrrolines 13a–c and 14a–c (Scheme 6).     

Synthesis and characterization of diblock copolymer of butadiene and 2-ethyl-2-oxazoline

Ｂｌｏｃｋｃｏｐｏｌｙｍｅｒｓａｓｉｄｅａｌｃｏｍｐａｔｉｂｉｌｉｚｅｒｓｈａｖｅｆｏｕｎｄｗｉｄｅａｐｐｌｉｃａｔｉｏｎｓｉｎｐｏｌｙｍｅｒｂｌｅｎｄｓ.Ｆｏｒｂｌｏｃｋｃｏｐｏｌｙｍｅｒｓｃｏｎｔａｉｎｉｎｇｐｏｌａｒｂｌｏｃｋｓ,ｉｔｓａｄｄｉｔｉｏｎｔｏａｂｌｅｎｄｃｏｎｔａｉｎｉｎｇｐｏｌａｒｃｏｍｐｏｎｅｎｔｓｌｅａｄｓｔｏｔｈｅｄｅｃｒｅａｓｅｉｎｉｎｔｅｒｆａｃｉａｌｔｅｎｓｉｏｎｂｅｔｗｅｅｎｔｈｅｉｍｍｉｓｃｉｂｌｅｐｈａｓｅｓｏｆｔｈｅｂｌｅｎｄ,ｔｈｅｉｎｃｒｅａｓｅｉｎｃ…     

Preparation and addition polymerization of substituted 2-oxazolines

The new oxazoline-containing monomers, 4-acrylyloxymethyl-2,4-dimethyl-2-oxazoline (AOMO), 4-methacrylyloxymethyl-2,4-dimethyl-2-oxazoline (MAOMO), 4-methacrylyloxymethyl-2-phenyl-4-methyl-2-oxazoline (PMAOMO), and the previously known monomer, 2-isopropenyl-4,4-dimethyl-2-oxazoline (IPRO), were synthesized for addition polymerization studies. The monomers were homopolymerized in benzene using a free radical initiator and in aqueous media using emulsion techniques. Molecular weights of 8,000–15,000 (M?_w) were obtained for the homopolymers. Copolymerization studies were carried out with AOMO, MAOMO, and IPRO as M₁, and methyl methacrylate (MMA), methyl acrylate (MA), styrene (STY), acrylonitrile (AN), and vinyl acetate (VA) as M₂ for each case of M₁. Relative reactivity ratios for the fifteen copolymers and Q and e values for the three oxazoline monomers were determined. The r₁ values for AOMO and MAOMO copolymerizations indicated a lower value of k₁₁ than expected, presumably because of steric effects. The r₁ values in the IPRO copolymerizations were somewhat larger than expected. It was proposed that significant electron donation to the radical center of IPRO·by resonance effects occured.     

Synthesis of a dibenzylchitin-type polysaccharide by acid-catalyzed polymerization

This paper describes the polymerization of 2-methyl-(3,6-di-O-benzyl- 1,2-dideoxy-α-D -glucopyrano)-[2,1-d]-2-oxazoline ( 1 ) with an acid catalyst. The polymerization proceeds involving stereoregular glycosylation to give polysaccharide 2 . The polymer structure, 2-acetamido-3,6-di-O-benzyl-2-deoxy-(l→4)-β-D -glucopyranan was determined by means of ¹H NMR, ¹³C NMR, and IR spectra as well as elemental analysis. The molecular weight was at most 4900 (degree of polymerization ≈ 13).