Mass spectral analysis of schiff bases derived from 1,1,1-trifluoro-2,4-pentanedione and 1,2-diaminoethane, 1,3-diaminopropane, 1,4-diaminobutane and 1,2-diaminobenzene and their copper(II) and nickel(II) complexes

The mass spectra of the title compounds have been determined and special attention has been given to metastable transitions and ion composition assignments. The interpretation of the mass spectra of N,N'-ethylenebis(5,5,5-trifluoro-4-oxopentan-2-imine) and its metal complexes is relatively straightforward. Bond breaking α and β (with H transfers) to nitrogen in the ethylenediamine portion of the molecule overwhemingly dominates the spectra. Changing the diamine bridge adds new features to the spectra in both expected and unexpected ways. Ligand fragmentation changes little when complexed to nickel as compared to hydrogen. Chelation of Cu(II) on the other hand leads to new fragmentation channels which increase in importance as electron availability in the diamine bridge increases. These new reactions are attributed to a reduction of the copper centre in the molecule.     

Structures of Ni(II), Pd(II) and Cu(II) complexes with 1,2-<Emphasis Type="Italic">bis</Emphasis>(5,5,5-trifluoro-4-oxopent-2-en-2-amino)benzene

A new fluorine-containing tetradentate ligand 1,2-bis(5,5,5-trifluoro-4-oxopent-2-en-2-amino)benzene and its complexes with Ni(II), Pd(II) and Cu(II) are characterized by single crystal X-ray diffraction. It is found that the enaminoketone fragments of the ligand are identical in bond lengths and angles; they are almost planar, and make the angles of 51.3° to the plane of the benzene ring. The structures of Ni(II), Pd(II), and Cu(II) complexes are similar and have a saddle-shape configuration. The metal ions have square planar coordination and are located almost in the center of the N₂O₂ square. The average M-N bond lengths are longer than M-O ones by 0.014 Å and 0.034 Å for the Ni(II) and Cu(II) complexes respectively, while in the Pd(II) complex, M-O is longer than M-N by 0.029 Å. The average chelate angles N-M-O in the complexes are: N-Ni-O 95.12°; N-Pd-O 95.68°; N-Cu-O 93.88°.     

Cobalt(II) and cobalt(III) complexes with 4′‐(4‐cyanophenyl)‐2,2′:6′,2′′‐terpyridine

4′‐Cyanophenyl‐2,2′:6′,2′′‐terpyridine (cptpy) was employed as an N,N′,N′′‐tridentate ligand to synthesize the compounds bis[4′‐(4‐cyanophenyl)‐2,2′:6′,2′′‐terpyridine]cobalt(II) bis(tetrafluoridoborate) nitromethane solvate, [Co^II(C₂₂H₁₄N₄)₂](BF₄)₂·CH₃NO₂, (I), and bis[4′‐(4‐cyanophenyl)‐2,2′:6′,2′′‐terpyridine]cobalt(III) tris(tetrafluoridoborate) nitromethane sesquisolvate, [Co^III(C₂₂H₁₄N₄)₂](BF₄)₃·1.5CH₃NO₂, (II). In both complexes, the cobalt ions occupy a distorted octahedral geometry with two cptpy ligands in a meridional configuration. A greater distortion from octahedral geometry is observed in (I), which indicates a different steric consequence of the constrained ligand bite on the Co^II and Co^III ions. The crystal structure of (I) features an interlocked sheet motif, which differs from the one‐dimensional chain packing style present in (II). The lower dimensionality in (II) can be explained by the disturbance caused by the larger number of anions and solvent molecules involved in the crystal structure of (II). All atoms in (I) are on general positions, and the F atoms of one BF₄⁻ anion are disordered. In (II), one B atom is on an inversion center, necessitating disorder of the four attached F atoms, another B atom is on a twofold axis with ordered F atoms, and the C and N atoms of one nitromethane solvent molecule are on a twofold axis, causing disorder of the methyl H atoms. This relatively uncommon study of analogous Co^II and Co^III complexes provides a better understanding of the effects of different oxidation states on coordination geometry and crystal packing.     

Monodentate and bridging behaviour of the sulfur‐containing ligand 4′‐[4‐(methylsulfanyl)phenyl]‐4,2′:6′,4′′‐terpyridine in two discrete zinc(II) complexes with acetylacetonate

The Zn complexes bis(acetylacetonato‐κ²O,O′)bis{4′‐[4‐(methylsulfanyl)phenyl]‐4,2′:6′,4′′‐terpyridine‐κN¹}zinc(II), [Zn(C₅H₇O₂)₂(C₂₂H₁₇N₃S)₂], (I), and {μ‐4′‐[4‐(methylsulfanyl)phenyl]‐4,2′:6′,4′′‐terpyridine‐κ²N¹:N^1′′}bis[bis(acetylacetonato‐κ²O,O′)zinc(II)], [Zn₂(C₅H₇O₂)₄(C₂₂H₁₇N₃S)], (II), are discrete entities with different nuclearities. Compound (I) consists of two centrosymmetrically related monodentate 4′‐[4‐(methylsulfanyl)phenyl]‐4,2′:6′,4′′‐terpyridine (L1) ligands binding to one Zn^II atom sitting on an inversion centre and two centrosymmetrically related chelating acetylacetonate (acac) groups which bind via carbonyl O‐atom donors, giving an N₂O₄ octahedral environment for Zn^II. Compound (II), however, consists of a bis‐monodentate L1 ligand bridging two Zn^II atoms from two different Zn(acac)₂ fragments. Intra‐ and intermolecular interactions are weak, mainly of the C—H...π and π–π types, mediating similar layered structures. In contrast to related structures in the literature, sulfur‐mediated nonbonding interactions in (II) do not seem to have any significant influence on the supramolecular structure.     

Adducts of bis(acetylacetonato)zinc(II) with 1,10‐phenanthroline and 2,2′‐bipyridine

In each of the zinc(II) complexes bis(acetylacetonato‐κ²O,O′)(1,10‐phenanthroline‐κ²N,N′)zinc(II), [Zn(C₅H₇O₂)₂(C₁₂H₈N₂)], (I), and bis(acetylacetonato‐κ²O,O′)(2,2′‐bipyridine‐κ²N,N′)zinc(II), [Zn(C₅H₇O₂)₂(C₁₀H₈N₂)], (II), the metal center has a distorted octahedral coordination geometry. Compound (I) has crystallographically imposed twofold symmetry, with Z′ = 0.5. The presence of a rigid phenanthroline group precludes intramolecular hydrogen bonding, whereas the rather flexible bipyridyl ligand is twisted to form an intramolecular C—H...O interaction [the chelated bipyridyl ligand is nonplanar, with the pyridyl rings inclined at an angle of 13.4 (1)°]. The two metal complexes are linked by dissimilar C—H...O interactions into one‐dimensional chains. The present study demonstrates the distinct effects of two commonly used ligands, viz. 1,10‐phenanthroline and 2,2′‐bipyridine, on the structures of metal complexes and their assembly.     

Two new zinc(II) and mercury(II) complexes based on N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide): synthesis,crystal structures and antibacterial activities

Reaction of N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide), C₂₀H₁₈F₂N₄O₂, ( L^F ), with zinc chloride and mercury(II) chloride produced different types and shapes of neutral coordination complexes, namely, dichlorido[N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide)‐κ²N,O]zinc(II), [ZnCl₂(C₂₀H₁₈F₂N₄O₂)], ( 1 ), and dichlorido[N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide)‐κ⁴O,N,N′,O′]mercury(II), [HgCl₂(C₂₀H₁₈F₂N₄O₂)], ( 2 ). The organic ligand and its metal complexes are characterized using various techniques: IR, UV–Vis and nuclear magnetic resonance (NMR) spectroscopies, in addition to powder X‐ray diffraction (PXRD), single‐crystal X‐ray crystallography and microelemental analysis. Depending upon the data from these analyses and measurements, a typical tetrahedral geometry was confirmed for zinc complex ( 1 ), in which the Zn^II atom is located outside the bis(benzhydrazone) core. The Hg^II atom in ( 2 ) is found within the core and has a common octahedral structure. The in vitro antibacterial activities of the prepared compounds were evaluated against two different bacterial strains, i.e. gram positive Bacillus subtilis and gram negative Pseudomonas aeruginosa bacteria. The prepared compounds exhibited differentiated growth‐inhibitory activities against these two bacterial strains based on the difference in their lipophilic nature and structural features.     

Two new dimeric cadmium(II) and zinc(II) sulfate complexes with 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine and 2,2:6′,2′′‐ter­pyridine

The structures of two new sulfate complexes are reported, namely di‐μ‐sulfato‐κ³O,O′:O′′‐bis{aqua­[2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine‐κ³N¹,N²,N⁶]­cadmium(II)} tetra­hydrate, [Cd₂(SO₄)₂(C₁₆H₁₂N₆)₂(H₂O)₂]·4H₂O, and di‐μ‐sulfato‐κ²O:O′‐bis­[(2,2′:6′,2′′‐ter­pyridine‐κ³N¹,N^1′,N^1′′)­zinc(II)] dihydrate, [Cd₂(SO₄)₂(C₁₅H₁₁N₃)₂]·2H₂O, the former being the first report of a Cd(tpt) complex [tpt is 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine]. Both compounds crystallize in the space group P and form centrosymmetric dimeric structures. In the cadmium complex, the metal center is heptacoordinated in the form of a pentagonal bipyramid, while in the zinc complex, the metal ion is in a fivefold environment, the coordination geometry being intermediate between square pyramidal and trigonal bipyramidal. Packing of the dimers leads to the formation of planar structures strongly linked by hydrogen bonding.     

{3,3′‐[2,2′‐(Ethylenedioxy)dibenzyl­idene]bis(S‐methyl dithiocarbazate)}­nickel(II)

The tetradentate N₂S₂ Schiff base ligand 3,3′‐[2,2′‐(ethyl­ene­di­oxy)di­benzyl­idene]­bis­(S‐methyl di­thio­car­ba­zate) (H₂L), prepared by the condensation of S‐methyl di­thio­carb­aza­te with 1,4‐bis(2‐formyl­phenyl)‐1,4‐dioxa­butane in a 1:2 molar ratio, reacts with nickel acetate to form the title neutral metal complex, [Ni(C₂₀H₂₀N₄O₂S₄)]. The X‐ray structure of the complex shows a distorted square‐planar geometry around the Ni atom. The monomeric units are weakly associated into dimers via a long Ni?S interaction [3.569 (1) Å]. These dimeric units are then linked by C—H?S intermolecular contacts to form a polymeric chain along the a axis.     

Two bicyclic dinuclear complexes generated from 3,3′‐[1,3,4‐thiadiazole‐2,5‐diyldi(thiomethylene)]dibenzoic acid (L) and dimethylformamide (DMF): [Cu(L)(DMF)]2 and [Zn(L)(DMF)]2

A new 1,3,4‐thiadiazole bridging ligand, namely 3,3′‐[1,3,4‐thiadiazole‐2,5‐diyldi(thiomethylene)]dibenzoic acid (L), has been used to create the novel isomorphous complexes bis{μ‐3,3′‐[1,3,4‐thiadiazole‐2,5‐diyldi(thiomethylene)]dibenzoato}bis[(N,N‐dimethylformamide)copper(II)], [Cu₂(C₁₈H₁₂N₂O₄S₃)₂(C₃H₇NO)₂], (I), and bis{μ‐3,3′‐[1,3,4‐thiadiazole‐2,5‐diyldi(thiomethylene)]dibenzoato}bis[(N,N‐dimethylformamide)zinc(II)], [Zn₂(C₁₈H₁₂N₂O₄S₃)₂(C₃H₇NO)₂], (II). Both exist as centrosymmetric bicyclic dimers constructed through the syn–syn bidentate bridging mode of the carboxylate groups. The two rings share a metal–metal bond and each of the metal atoms possesses a square‐pyramidal geometry capped by the dimethylformamide molecule. The 1,3,4‐thiadiazole rings play a critical role in the formation of a π–π stacking system that expands the dimensionality of the structure from zero to one. The thermogravimetric analysis of (I) indicates decomposition of the coordinated ligands on heating. Compared with the fluorescence of L in the solid state, the fluorescence intensity of (II) is relatively enhanced with a slight redshift, while that of (I) is quenched.     

Copper(II) and cadmium(II) isothiocyanate coordination polymers with 4,4′‐bi‐1,2,4‐triazole

The coordination polymers catena‐poly[[[(4,4′‐bi‐1,2,4‐triazole‐κN¹)bis(thiocyanato‐κN)copper(II)]‐μ‐4,4′‐bi‐1,2,4‐triazole‐κ²N¹:N^1′] dihydrate], {[Cu(NCS)₂(C₄H₄N₆)₂]·2H₂O}_n, (I), and poly[tetrakis(μ‐4,4′‐bi‐1,2,4‐triazole‐κ²N¹:N^1′)bis(μ‐thiocyanato‐κ²N:S)tetrakis(thiocyanato‐κN)tricadmium(II)], [Cd₃(NCS)₆(C₄H₄N₆)₄]_n, (II), exhibit chain and two‐dimensional layer structures, respectively. The differentiation of the Lewis acidic nature of Cu^II and Cd^II has an influence on the coordination modes of the triazole and thiocyanate ligands, leading to topologically different polymeric motifs. In (I), copper ions are linked by bitriazole N:N′‐bridges into zigzag chains and the tetragonal–pyramidal CuN₅ environment is composed of two thiocyanate N atoms and three triazole N atoms [basal Cu—N = 1.9530 (18)–2.0390 (14) Å and apical Cu—N = 2.2637 (15) Å]. The structure of (II) contains two types of crystallographically unique Cd^II atoms. One type lies on an inversion center in a distorted CdN₆ octahedral environment, with bitriazole ligands in the equatorial plane and terminal isothiocyanate N atoms in the axial positions. The other type lies on a general position and forms centrosymmetric binuclear [Cd₂(μ‐NCS‐κ²N:S)₂(NCS)₂] units (tetragonal–pyramidal CdN₄S coordination). N:N′‐Bridging bitriazole ligands link the Cd centers into a flat (4,4)‐network.     

[N,N′‐Bis(3‐aminopropyl)ethylenediamine‐κ4N,N′,N′′,N′′′](trithiocyanurato‐κ2N,S)zinc(II) ethanol solvate

In the crystal structure of the title compound, [N,N′‐bis(3‐­amino­propyl)­ethyl­enedi­amine‐κ⁴N,N′,N′′,N′′′][1,3,5‐triazine‐2,4,6(1H,3H,5H)‐tri­thionato(2−)‐κ²N,S]­zinc(II) ethanol sol­vate, [Zn(C₈H₂₂N₄)₂(C₃HN₃S₃)]·C₂H₆O, the Zn^II atom is octa­hedrally coordinated by four N atoms [Zn—N = 2.104 (2)–2.203 (2) Å] of a tetradentate N‐donor N,N′‐bis(3‐­amino­propyl)­ethyl­enedi­amine (bapen) ligand and by two S and N atoms [Zn—S = 2.5700 (7) Å and Zn—N = 2.313 (2) Å] of a tri­thio­cyanurate(2−) (ttcH²⁻) dianion bonded as a bidentate ligand in a cis configuration. The crystal structure of the compound is stabilized by a network of hydrogen bonds.     

A one‐dimensional zinc(II) coordination polymer incorporating [1,1′‐biphenyl]‐4,4′‐dicarboxylate and N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands

In the title compound, catena‐poly[[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[1,1′‐biphenyl]‐4,4′‐dicarboxylato‐[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]], [Zn₂(C₁₄H₈O₄)Cl₂(C₂₆H₂₂N₄O₂)₃]_n, the Zn^II centre is four‐coordinate and approximately tetrahedral, bonding to one carboxylate O atom from a bidentate bridging dianionic [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand, to two pyridine N atoms from two N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands and to one chloride ligand. The pyridyl ligands exhibit bidentate bridging and monodentate terminal coordination modes. The bidentate bridging pyridyl ligand and the bridging [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand both lie on special positions, with inversion centres at the mid‐points of their central C—C bonds. These bridging groups link the Zn^II centres into a one‐dimensional tape structure that propagates along the crystallographic b direction. The tapes are interlinked into a two‐dimensional layer in the ab plane through N—H...O hydrogen bonds between the monodentate ligands. In addition, the thermal stability and solid‐state photoluminescence properties of the title compound are reported.     

Three zinc(II) and cadmium(II) complexes containing 4‐amino‐3,5‐bis(pyridin‐2‐yl)‐1,2,4‐triazole and polynitrile ligands: synthesis,molecular and supramolecular structures,and photoluminescence properties

Three photoluminescent complexes containing either Zn^II or Cd^II have been synthesized and their structures determined. Bis[4‐amino‐3,5‐bis(pyridin‐2‐yl)‐1,2,4‐triazole‐κ²N ¹,N ⁵]bis(dicyanamido‐κN ¹)zinc(II), [Zn(C₁₂H₁₀N₆)₂(C₂N₃)₂], (I), bis[4‐amino‐3,5‐bis(pyridin‐2‐yl)‐1,2,4‐triazole‐κ²N ¹,N ⁵]bis(dicyanamido‐κN ¹)cadmium(II), [Cd(C₁₂H₁₀N₆)₂(C₂N₃)₂], (II), and bis[4‐amino‐3,5‐bis(pyridin‐2‐yl)‐1,2,4‐triazole‐κ²N ¹,N ⁵]bis(tricyanomethanido‐κN ¹)cadmium(II), [Cd(C₁₂H₁₀N₆)₂(C₄N₃)₂], (III), all crystallize in the space group P , with the metal centres lying on centres of inversion, but neither analogues (I) and (II) nor Cd^II complexes (II) and (III) are isomorphous. A combination of N—H…N and C—H…N hydrogen bonds and π–π stacking interactions generates three‐dimensional framework structures in (I) and (II), and a sheet structure in (III). The photoluminescence spectra of (I)–(III) indicate that the energies of the π–π* transitions in the coordinated triazole ligand are modified by minor changes of the ligand geometry associated with coordination to the metal centres.     

Cadmium(II) thio‐ and selenocyanate complexes of 3,3′‐bis(1,2,4‐triazol‐4‐yl)‐1,1′‐biadamantane,a ligand designed with an `extended nanodiamond' aliphatic platform

In the structures of the Cd^II pseudohalide coordination polymer poly[[diaquabis[μ₂‐3,3′‐bis(1,2,4‐triazol‐4‐yl)‐1,1′‐biadamantane‐κ²N¹:N^1′]cadmium(II)] dithiocyanate dihydrate], {[Cd(C₂₄H₃₂N₆)₂(H₂O)₂](NCS)₂·2H₂O}_n, (I), and the isomorphous selenocyanate analogue, {[Cd(C₂₄H₃₂N₆)₂(H₂O)₂](NCSe)₂·2H₂O}_n, (II), the Cd^II cations occupy inversion centres and have octahedral CdN₄O₂ environments, completed by four N atoms of the organic ligands [Cd—N = 2.316 (2) and 2.361 (2) Å for (I), and 2.313 (3) and 2.372 (3) Å for (II)] and two trans‐coordinated aqua ligands [Cd—O = 2.3189 (15) Å for (I) and 2.323 (2) Å for (II)]. In each compound, the ligand displays a bidentate N¹:N^1′‐bridging mode, connecting the metal centres at a distance of 14.66 Å into two‐dimensional nets of (4,4)‐topology, while the uncoordinated thio(seleno)cyanate anions reside inside the net cavities. Hydrogen bonding between the water molecules, anions and 1,2,4‐triazole N atoms supports the tight packing, with an interlayer distance of 6.09 Å.     

Comparative study on polyimides from isomeric 3,3′‐, 3,4′‐, and 4,4′‐linked bis(thioether anhydride)s

Three isomeric bis(thioether anhydride) monomers, 4,4′‐bis(2,3‐dicarboxyphenylthio) diphenyl ketone dianhydride (3,3′‐PTPKDA), 4,4′‐bis(3,4‐dicarboxyphenylthio) diphenyl ketone dianhydride (4,4′‐PTPKDA), and 4‐(2,3‐dicarboxyphenylthio)‐4′‐(3,4‐dicarboxyphenylthio) diphenyl ketone dianhydride (3,4′‐PTPKDA), were prepared through multistep reactions. Their structures were determined via Fourier transform infrared, NMR, and elemental analysis. Three series of polyimides (PIs) were prepared from the obtained isomeric dianhydrides and aromatic diamines in N‐methyl‐2‐pyrrolidone (NMP) via the conventional two‐step method. The PIs showed excellent solubility in common organic solvents such as chloroform, N,N‐dimethylacetamide, and NMP. Their glass‐transition temperatures decreased according to the order of PIs on the basis of 3,3′‐PTPKDA, 3,4′‐PTPKDA, and 4,4′‐PTPKDA. The 5% weight loss temperatures (T_5%) of all PIs in nitrogen were observed at 504–519 °C. The rheological properties of isomeric PI resins based on 3,3′‐PTPKDA/4,4′‐oxydianiline/phthalic anhydride showed lower complex viscosity and better melt stability compared with the corresponding isomers from 4,4′‐ and 3,4′‐PTPKDA. In addition, the PI films based on three isomeric dianhydrides and 2,2′‐bis(trifluoromethyl)benzidine had a low moisture absorption of 0.27–0.35%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

(2,2′‐Biquinoline‐κ2N,N′)dichloropalladium(II), ‐copper(II) and ‐zinc(II)

In the three title complexes, namely (2,2′‐biquinoline‐κ²N,N′)dichloro­palladium(II), [PdCl₂(C₁₈H₁₂N₂)], (I), and the corresponding copper(II), [CuCl₂(C₁₈H₁₂N₂)], (II), and zinc(II) complexes, [ZnCl₂(C₁₈H₁₂N₂)], (III), each metal atom is four‐coordinate and bonded by two N atoms of a 2,2′‐biquinoline molecule and two Cl atoms. The Pd^II atom has a distorted cis‐square‐planar coordination geometry, whereas the Cu^II and Zn^II atoms both have a distorted tetra­hedral geometry. The dihedral angles between the N—M—N and Cl—M—Cl planes are 14.53 (13), 65.42 (15) and 85.19 (9)° for (I), (II) and (III), respectively. The structure of (II) has twofold imposed symmetry.     

The bis(acetonitrile‐κN)bis[N,N‐bis(diphenylphosphanyl)ethanamine‐κ2P,P′]iron(II) tetrabromidoferrate(II) and μ‐oxido‐bis[tribromidoferrate(III)] complex salts

Orange crystals of bis(acetonitrile‐κN)bis[N,N‐bis(diphenylphosphanyl)ethanamine‐κ²P,P′]iron(II) tetrabromidoferrate(II), [Fe(CH₃CN)₂(C₂₆H₂₅NP₂)₂][FeBr₄], (I), and red crystals of bis(acetonitrile‐κN)bis[N,N‐bis(diphenylphosphanyl)ethanamine‐κ²P,P′]iron(II) μ‐oxido‐bis[tribromidoferrate(III)], [Fe(CH₃CN)₂(C₂₆H₂₅NP₂)₂][Fe₂Br₆O], (II), were obtained from the same solution after prolonged exposure to atmospheric oxygen, resulting in partial oxidation of the [FeBr₄]²⁻ anion to the [Br₃FeOFeBr₃]²⁻ anion. The asymmetric unit of (I) consists of three independent cations, one on a general position and two on inversion centres, with two anions, required to balance the charge, located on general positions. The asymmetric unit of (II) consists of two independent cations and two anions, all on special positions. The geometric parameters within the coordination environments of the cations do not differ significantly, with the major differences being in the orientation of the phenyl rings on the bidentate phosphane ligand. The ethyl substituent in the cation of (II) and the Br atoms in the anions of (II) are disordered. The P—Fe—P bite angles represent the smallest angles reported to date for octahedral Fe^II complexes containing bidentate phosphine ligands with MeCN in the axial positions, ranging from 70.82 (3) to 70.98 (4)°. The average Fe—Br bond distances of 2.46 (2) and 2.36 (2) Å in the [FeBr₄]²⁻ and [Br₃FeOFeBr₃]²⁻ anions, respectively, illustrate the differences in the Fe oxidation states.     

3,3′‐Dinitro‐2,2′‐dithiodipyridine

In the title compound, C₁₀H₆N₄O₄S₂, (I), the molecule has a centre of inversion. The structure is a positional isomer of 5,5′‐dinitro‐2,2′‐dithiodipyridine [Brito, Mundaca, Cárdenas, López‐Rodríguez & Vargas (2007). Acta Cryst. E 63 , o3351–o3352], (II). The 3‐nitropyridine fragment of (I) shows excellent agreement with the bonding geometries of (II). The most obvious differences between them are in the S—S bond length [2.1167 (12) Å in (I) and 2.0719 (11) Å in (II)], and in the C—C_ipso—N_ring [119.8 (2)° in (I) and 123.9 (3)° in (II)] and S—C—C [122.62 (18)° in (I) and 116.0 (2)° in (II)] angles. The crystal structure of (I) has an intramolecular C—H...O interaction, with an H...O distance of 2.40 (3) Å, whereas this kind of interaction is not evident in (II). The molecules of (I) are linked into centrosymmetric R⁴₄(30) motifs by a C—H...O interaction. There are no aromatic π–π stacking and no C—H...π(arene) interactions. Compound (I) can be used as a nucleophilic tecton in self‐assembly reactions with metal centres of varying lability.     

Polyimidines. XI. Polyimidines from 3,3′,4,4′-benzophenonetetracarboxylic dianhydride and 4,4′-(hexafluoroisopropylidene) diphthalic anhydride

Two new bis(benzylidenephthalide)monomers were synthesized by melt condensation of phenylacetic acid with 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA) and with 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA). A mixture of three isomers for each monomer was obtained and polymerized with diamines to produce new polyimidines. Polymerizations were conducted with m-xylylenediamine (MXDA) or 4,4′-oxydianiline (ODA) in quantitative yields for the undehydrated intermediate. Inherent viscosities ranged from 0.17 to 0.35 dL/g in N,N-dimethylformamide (DMF) or N-methyl-2-pyrrolidone (NMP). These intermediate poly(hydroxylactams) were thermally dehydrated to polyimidines which exhibited a 10% weight loss, as high as 546°C in nitrogen. Inherent viscosities of the dehydrated (cured) polyimidines ranged from 0.14 to 0.20 dL/g in NMP. Brittle films could be cast from NMP solutions.     

Bis[μ3‐cis‐N‐(2‐aminopropyl)‐N′‐(2‐carboxylatophenyl)oxamidato(3–)]bis(2,2′‐bipyridine)dichloridotetracopper(II) dihydrate

The title complex, bis[μ₃‐cis‐N‐(2‐aminopropyl)‐N′‐(2‐carboxylatophenyl)oxamidato(3−)]‐1:2:4κ⁷N,N′,N′′,O:O′,O′′:O′′′;2:3:4κ⁷O′′′:N,N′,N′′,O:O′,O′′‐bis(2,2′‐bipyridine)‐2κ²N,N′;4κ²N,N′‐dichlorido‐1κCl,3κCl‐tetracopper(II) dihydrate, [Cu₄(C₁₂H₁₂N₃O₄)₂Cl₂(C₁₀H₈N₂)₂]·2H₂O, consists of a neutral cyclic tetracopper(II) system having an embedded centre of inversion and two solvent water molecules. The coordination of each Cu^II atom is square‐pyramidal. The separations of Cu^II atoms bridged by cis‐N‐(2‐aminopropyl)‐N′‐(2‐carboxylatophenyl)oxamidate(3−) and carboxyl groups are 5.2096 (4) and 5.1961 (5) Å, respectively. A three‐dimensional supramolecular structure involving hydrogen bonding and aromatic stacking is observed.