Synthesis and characterization of new soluble aromatic polyamides from diaminotetraphenylimidazolin-2-one and various aromatic dicarboxylic acid chlorides

Novel aromatic polyamides, having inherent viscosities of 0.76-2.31 dL/g, were synthesized by the low temperature solution polycondensation of a new highly phenylated diamine monomer having an imidazolinone group, 1,3-bis(4-aminophenyl)-4,5-diphenylimidazoline-2-one (TPIDA), with various aromatic diacid chlorides. All the polymers were amorphous, and most of the polyamides were readily soluble in organic solvents such as N-methyl–2-pyrrolidone, N,N-dimethylacetamide (DMAc), and m-cresol. Flexible and tough films could be prepared from the DMAc solutions of these soluble aromatic polyamides. The glass transition temperatures and 10% weight loss temperatures under nitrogen of the polyamides were in the range of 275–315°C and 430–505°C, respectively. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of novel aromatic polyamides from 3,4-bis(4-aminophenyl)-2,5-diphenylfuran and aromatic diacid chlorides

A new highly phenylated heterocyclic diamine, 3,4-bis(4-aminophenyl)-2,5-diphenylfuran, was synthesized in three steps from 4–-nitrodeoxybenzoin. The low temperature solution polycondensation of the diamine with various aromatic diacid chlorides afforded tetraphenylfuran-containing aromatic polyamides with inherent viscosities of 0.2–0.8 dL/g. Copolyterephthalamides were obtained from the diamine and 4,4′-oxydianiline. The polyamides were generally soluble in a wide range of solvents that included N,N-dimethylacetamide, N-methyl-2-pyrrolidone, pyridine, and m-cresol. Glass transition temperatures of the polyamides and copolyamides ranged from 302–342°C, and 10% weight loss was observed above 480°C in nitrogen.     

Synthesis and characterization of aromatic polyamides from 1,1-bis(4-aminophenyl)-2,2-diphenylethylene and aromatic diacid chlorides

Novel, soluble aromatic polyamides and copolyamides containing tetraphenylethylene units were prepared by the low temperature solution polycondensation of 1,1-bis(4-aminophenyl)-2,2-diphenylethylene and aromatic diamines with various aromatic diacid chlorides. Highmolecular-weight polyamides having inherent viscosities of 0.6–1.5 dL/g and number-average molecular weight above 21000 were obtained quantitatively. These polymers were readily soluble in various solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide (DMAc), and dimethyl sulfoxide and gave pale yellow, transparent, flexible films by casting from DMAc solution. The polymers had glass transition temperatures between 290 and 340°C, and started to lose weight around 400°C, with 10% weight loss being recorded at about 470°C in air.     

Synthesis and characterization of novel aromatic polyamides from 3,4-bis(4-aminophenyl)-2,5-diphenylpyrrole and aromatic diacid chlorides

A new polymer-forming monomer, 3,4-bis(4-aminophenyl)-2,5-diphenylpyrrole, was synthesized in three steps starting from 4′-nitrodeoxybenzoin. Tetraphenylpyrrole-containing aromatic polyamides and copolyamides were prepared from the diamine with various aromatic diacid chlorides and from a mixture of the diamine and 4,4′-oxydianiline with terephthaloyl chloride, respectively. The resultant polymers had inherent viscosities in the 0.3–1.8 dL/g range and were generally soluble in various organic solvents including N,N-dimethylacetamide and m-cresol. They have glass transition temperatures in the range of 306–333°C and showed no weight loss below 380°C in both air and nitrogen atmospheres.     

Synthesis and characterization of aromatic polythiazole-amides from new aromatic diamines containing phenyl-pendant thiazole units

New aromatic diamines containing phenyl-pendant thiazole units were synthesized in three steps starting from p-nitrobenzyl phenyl ketone. Novel aromatic polyamides containing phenyl-pendant thiazole units were prepared by the low-temperature solution polyconden-sation of 1,4- (or 1.3-) bis[5-(p-aminophenyl)-4-phenyl-2-thiazolyl] benzene with various aromatic dicarboxylic acid chlorides in N,N-dimethylacetamide. High molecular weight polyamides having inherent viscosities of 0.5–3.0 dL/g were obtained quantitatively. The polythiazole-amides with m-phenylene, 4,4′-oxydiphenylene, and 4,4′-sulfonyldiphenylene units were soluble in N-methyl-2-pyrrolidone, N,N-dimethylacetamide, and pyridine, and gave transparent flexible films by casting from the solutions. These organic solvent-soluble polyamides displayed prominent glass transition temperatures (T_g) between 257 and 325°C. On the other hand, the polythiazole-amides with p-phenylene and 4,4′-biphenylene units were insoluble in most organic solvents, and had no observed T_g. All the polythiazole-amides started to decompose at about 400°C with 10% weight loss being recorded at 450–525°C in air. © 1995 John Wiley & Sons, Inc.     

Preparation and properties of new aromatic polyamides from bis(4-aminophenyl) phenylphosphine and aromatic dicarboxylic acids

A new triphenylphosphine-type monomer, bis(4-aminophenyl) phenylphosphine, was synthesized starting from p-bromoaniline and dichlorophenylphosphine. The aromatic polyamides (aramids) containing triphenyphosphine unit in the polymer backbone was prepared by the polycondensation of this diamine with various aromatic diacid chlorides using a low-temperature solution method in N,N-dimethylacetamide (DMAc). The aramids having inherent viscosities of 0.4–0.7 dL/g were obtained in quantitative yields. The polymers were amorphous and soluble in various organic solvents such as DMAc, N-methylpyrrolidone, dimethyl sulfoxide, pyridine, and m-cresol. Transparent, tough, and flexible films were obtained by casting from the DMAc solutions. The glass transition temperatures of the aramids were in the range of 265–310°C, and the 10% weight loss temperatures were above 400°C in air. © 1993 John Wiley & Sons, Inc.     

Preparation and properties of fluorine-containing aromatic polyamides from tetrafluorophthaloyl chlorides and aromatic diamines

New fluorine-containing aromatic polyamides with inherent viscosities of 0.4–1.8 dL/g were prepared by the low temperature solution polycondensation of tetrafluoroisophthaloyl and tetrafluoroterephthaloyl chlorides with N,N′-bis(trimethylsilyl)-substituted aromatic diamines. The aromatic polyperfluoroisophthalamides were amorphous polymers with glass transition temperatures around 280°C, whereas the polyperfluoroterephthalamides were crystalline. Most of these aromatic polyamides were soluble in organic solvents, and began to decompose around 330°C in air or nitrogen atmosphere.     

Synthesis and characterization of N-phenylated aromatic polyamides from N-silylated dianilino compounds and aromatic diacid chlorides

N-Phenylated aromatic polyamides of high molecular weights were synthesized by the hightemperature solution polycondensation of N,N′ -di(trimethylsilyl)-substituted dianilino compounds derived from p-dianilinobenzene, bis(4-anllinophenyl) ether, and α,α′-dianilino-p-xylene, with isophthaloyl and terephthaloyl chloride. Almost all of the N-phenylated polyamides were amorphous, and soluble in a variety of organic solvents including dimethylformamide, m-cresol, and chloroform. Transparent and flexible films of these polymers could be cast from the dimethylformamide solutions. Four wholly aromatic polyamides had glass transition temperatures in the range of 195–255°C, and began to lose weight around 400°C in air.     

Preparation and Properties of Novel Aromatic Polyamides from Diamines Containing 4,5-Imidazolediyl Structure

Novel aromatic polyamides were prepared from aromatic diamine containing 4,5-imidazolediyl unit, either by low temperature solution polycondensation or by direct polycondensation. Used diamines were 4,5-bis(4-aminophenyl)-2-phenylimidazole 1, 4,5-bis[4-(4-aminophenyl)]-2-(4-methylphenyl)imidazole 2 and 4,5-bis[4-(4-aminophenoxy)phenyl]-2-phenylimidazole 3. The obtained aromatic polyamides were produced with moderate to high inherent viscosity and soluble in polar aprotic solvents such as N,N-dimethylacetamide (DMAc), 1-methyl-2-pyrrolidone (NMP), N,N-dimethylformamide (DMF) and dimethyl sulfoxide (DMSO). Thermogravimetric analysis showed those polymers were stable up to 422°C in nitrogen atmosphere. The glass transition temperature (T _g)s of the polymers derived from diamine 3 were in the range between 243 and 275°C, and these values were approximately 120–160°C lower than those analogue polyamide I series containing no phenoxy units. The properties of polyamide I series are also compared with those of analogue polymers that order of aromatic nuclei and amide linkage is reversible.     

Preparation and properties of disilane-containing photodegradable aromatic polyamides from bis(p-aminophenyl)tetramethyldisilane and aromatic diacid chlorides

1,2-Bis(p-aminophenyl)tetramethyldisilane was synthesized from 1,2-dichlorotetramethyldisilane and 4-[N,N-bis(trimethylsilyl)amino]phenyllithium. The diamine was reacted with various aromatic diacid chlorides giving disilane-containing aromatic polyamides (aramids), whose inherent viscosities were between 0.27 and 0.70 dL/g, depending on the diacid chlorides used. The aramids had glass transition temperatures between 194 and 255°C. No weight loss was observed below 350°C. Some of the polymers were found to be semicrystalline based on their x-ray diffractograms. The aramid films showed a strong ultraviolet (UV) absorption at 287 nm, which decreased during irradiation with UV light, suggesting that cleavage of the silicon-silicon bond in the aramid backbone occurs. A decrease in the inherent viscosity and molecular weight of the soluble aramid derived from phenylindanedicarbonyl chloride was also observed by irradiation with UV light.     

Synthesis and characterization of soluble aromatic polyazomethines from 2,5-bis(4-aminophenyl)-3,4-diphenylthiophene and aromatic dialdehydes

New soluble aromatic polyazomethines with inherent viscosities of 0.4–0.8 dL/g were prepared by the solution polycondensation of 2,5-bis(4-aminophenyl)-3,4-diphenylthiophene, bis(4-aminophenyl) ether, and aromatic dialdehydes in o-chlorophenol at 20°C. The copolyazomethines are generally soluble in chlorinated hydrocarbons, amide-type or phenolic solvents. The thermal stability of the polymers, which showed no weight loss up to 400°C in both air and nitrogen atmospheres.     

Synthesis and properties of aromatic polyamides containing the cyclohexane structure

1,1-Bis[4-(4-carboxyphenoxy)phenyl]cyclohexane (III) and 1,1-bis[4-(4-aminophenoxy)phenyl]cyclohexane (V) were prepared in two main steps starting from the aromatic nucleophilic substitution of p-fluorobenzonitrile and p-chloronitrobenzene, respectively, with 1,1-bis(4-hydroxyphenyl)cyclohexane in the presence of potassium carbonate in N,N-dimethylformamide (DMF). Using triphenyl phosphite and pyridine as condensing agents, two series of polyamides with cyclohexylidene cardo groups were directly polycondensated from dicarboxylic acid III with various aromatic diamines or from diamine V with various aromatic dicarboxylic acids in an N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride. The polyamides exhibited inherent viscosities in the range of 0.45 to 1.78 dL/g. Almost all of the polymers were readily soluble in polar aprotic solvents such as NMP and N,N-dimethylacetamide (DMAc) and could afford transparent, flexible, and tough films by solution casting. The glass transition temperatures (T_g) of these aromatic polyamides were in the range of 180–243°C by DSC, and the 10% weight loss temperatures in nitrogen and air were all above 450°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3575–3583, 1999     

Synthesis and characterization of novel aromatic polyamides containing 3-trifluoromethyl-substituted triphenylamine

A new 3-trifluoromethyl-substituted triphenylamine-containing aromatic diacid monomer, N,N-bis(4-carboxyphenyl)-3-trifluoromethylaniline, was prepared by the substitution reaction of 3-trifluoromethylaniline with 4-fluorobenzonitrile, followed by alkaline hydrolysis of the dinitrile intermediate. Novel aromatic polyamides with 3-trifluoromethyl-substituted triphenylamine moieties were prepared from the diacid and various aromatic diamines via the direct phosphorylation polycondensation. All the polyamides were amorphous and readily soluble in many polar organic solvents such as N,N-dimethylacetamide and N-methyl-2-pyrrolidone, and could be solution-cast into transparent, tough, and flexible films with good mechanical properties. They exhibited good thermal stability with relatively high glass-transition temperatures (258–327°C), 10% weight-loss temperatures above 500°C, and char yields higher than 60% at 800°C in nitrogen. These polymers had low dielectric constants of 3.22–3.70 (100 Hz), low moisture absorption in the range of 1.75–2.58%, and high transparency with an ultraviolet–visible absorption cut-off wavelength in the 375–395 nm range. Cyclic voltammograms of the polyamide films cast onto an indium tin oxide coated glass substrate exhibited a reversible oxidation redox couple with oxidation half-wave potentials (E_1/2) of 0.95–1.00 V vs. Ag/AgCl in an acetonitrile solution.     

Synthesis and characterization of novel aromatic polyamides with polyalicyclic cardo groups

5,5-Bis[4-(4-carboxyphenoxy)phenyl]hexahydro-4,7-methanoindan ( 3a ) and 5,5-bis[4-(4-aminophenoxy)phenyl]hexahydro-4,7-methanoindan ( 3b ) were prepared in two main steps starting from the aromatic nucleophilic halogen-displacement of p-fluorobenzonitrile and p-chloronitrobenzene, respectively, with 5,5-bis(4-hydroxyphenyl)hexahydro-4,7-methanoindan in the presence of potassium carbonate in N,N-dimethylformamide (DMF). Using triphenyl phosphite and pyridine as condensing agents, two series of polyamides having polyalicyclic cardo units were directly polycondensated from dicarboxylic acid 3a with various aromatic diamines, or from diamine 3b with various aromatic dicarboxylic acids in the N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride. High molecular weight polyamides with inherent viscosities between 0.73 and 1.44 dL/g were obtained. All polymers were readily soluble in polar aprotic solvents such as NMP and N,N-dimethylacetamide (DMAc) and afforded transparent, flexible, and tough films by solution casting. The glass-transition temperatures (T_g) of these aromatic polyamides were in the range of 219–253°C by DSC, and the 10% weight loss temperatures in nitrogen and air were above 467 and 465°C, respectively. A comparative study of some polyamides with an isomeric repeat unit is also presented. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4510–4520, 1999     

Synthesis and characterization of new soluble aromatic polyimides from 3,4-bis(4-aminophenyl)-2,5-diphenylpyrrole and aromatic tetracarboxylic dianhydrides

Novel aromatic polyimides containing tetraphenylpyrrole unit were synthesized from 3,4-bis(4-aminophenyl)-2,5-diphenylpyrrole and various aromatic tetracarboxylic dianhydrides by the usual two-step procedure that included ring-opening polyaddition and subsequent thermal cyclodehydration. These polymers had inherent viscosities in the 0.20–0.65 dL/g range and were practically amorphous as shown by the X-ray diffraction studies. All the polyimides except for polypyromellitimide were easily soluble in a wide range of organic solvents such as o-chlorophenol, pyridine, 1,3-dimethyl-2-imidazolidone, N,N-dimethylacetamide, and N-methyl-2-pyrrolidone at room temperature. These polyimides had high glass transition temperatures of 302–359°C and exhibited 10% weight loss at temperatures above 510°C in nitrogen.     

Syntheses and properties of aromatic polyamides and polyimides based on N-phenyl-3,3-bis[4-(p-aminophenoxy) phenyl] phthalimidine

N-Phenyl-3,3-Bis[4-(p-aminophenoxy)phenyl] phthalimidine ( II ) was used as a monomer with various aromatic dicarboxylic acids and tetracarboxylic dianhydrides to synthesize polyamides and polyimides, respectively. The diamine II was derived by a nucleophilic substitution of N-phenyl-3,3-bis(4-hydroxyphenyl) phthalimidine with p-chloronitrobenzene in the presence of K₂CO₃ and then hydro-reduced. Polyamides IV _a-g having inherent viscosities of 0.55–1.64 dL/g were prepared by the direct polycondensation of the diamine II with various aromatic diacids using triphenyl phosphite and pyridine as condensing agents. All the aromatic polyamides were amorphous and readily soluble in various polar solvents such as N,N-dimethylacetamide (DMAc), N,N-dimethylformamide, dimethylsulfoxide, and N-methyl-2-pyrrolidone (NMP). Transparent and flexible films of these polymers could be cast from the DMAc solutions. These aromatic polyamides had glass transition temperatures in the range of 293–319°C and 10% weight loss occurred up to 480°C. The polyimides were synthesized from diamine II and various aromatic dianhydrides via the two-stage procedure that included ring-opening polyaddition in DMAc to give poly(amic acid)s, followed by thermal or chemical conversion to polyimides. Most of the aromatic polyimides obtained by chemical cyclization were found to be soluble in NMP, m-cresol, and o-chlorophenol. These polyimides showed almost no weight loss up to 500°C in air or nitrogen atmosphere. © 1994 John Wiley & Sons, Inc.     

Syntheses and properties of aromatic polyamides and polyimides derived from 9,9-bis[4-(p-aminophenoxy)phenyl]fluorene

9,9-Bis[4-(p-aminophenoxy)phenyl]fluorene ( II ) was used as a monomer with various aromatic dicarboxylic acids and tetracarboxylic dianhydrides to synthesize polyamides and polyimides, respectively. The diamine II was derived by a nucleophilic substitution of 9,9-bis(4-hydroxyphenyl)fluorene with p-chloronitrobenzene in the presence of K₂CO₃ and then hydro-reduced. Polyamides IV _a-g having inherent viscosities of 0.73–1.39 dL/g were prepared by the direct polycondensation of the diamine II with various aromatic diacids using triphenyl phosphite and pyridine as condensing agents. All the aromatic polyamides were amorphous and readily soluble in various polar solvents such as N,N-dimethylacetamide, N,N-dimethylformamide, dimethylsulfoxide, and N-methyl-2-pyrrolidone. Transparent and flexible films of these polymers could be cast from the DMAc solutions. These aromatic polyamides had glass transition temperatures in the range of 283–309°C and 10% weight loss occurred up to 460°C. The polyimides were synthesized from diamine II and various aromatic dianhydrides via the two-stage procedure that included ring-opening poly-addition in DMAc to give poly(amic acid)s, followed by thermal or chemical conversion to polyimides. The poly(amic acid)s had inherent viscosities of 0.62–1.78 dL/g, depending on the dianhydrides. Most of the aromatic polyimides obtained by chemical cyclization were found to be soluble in NMP. These polyimides showed almost no weight loss up to 500°C in air or nitrogen atmosphere. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of new soluble aromatic polyimides from 3,4-bis (4-aminophenyl)-2,5-diphenylfuran and aromatic tetracarboxylic dianhydrides

New soluble polyimides with inherent viscosities of 0.2–0.6 dL/g were synthesized from 3,4-bis (4-aminophenyl)-2,5-diphenylfuran and various aromatic tetracarboxylic dianhydrides by the conventional two-step method which involved ring-opening polyaddition and subsequent cyclodehydration. Almost all of the polymides were generally soluble in a wide range of organic solvents such as N,N-dimethylacetamide, 1,3-dimethyl-2-imidazolidone, m-cresol, o-chlorophenol, and pyridine. The polyimide prepared from pyromellitic dianhydride was crystalline, whereas the other polyimides were amorphous. All the polyimides have glass transition temperatures in the range of 281–344°C and showed no appreciable weight loss up to 410°C in both air and nitrogen atmospheres.     

Synthesis and properties of Ortho-linked aromatic polyamides based on 4,4′-(2,3-naphthalenedioxy) dibenzoic acid

A novel aromatic dicarboxylic acid monomer, 4,4′-(2,3-naphthalenedioxy)-dibenzoic acid ( 3 ), was prepared by the fluorodisplacement reaction of p-fluorobenzonitrile with 2,3-dihydroxynaphthalene in N,N-dimethylformamide (DMF) in the presence of potassium carbonate followed by alkaline hydrolysis of the intermediate dinitrile. A series of novel aromatic polyamides containing ortho-linked aromatic units in the main chain were synthesized by the direct polycondensation of diacid 3 and a variety of aromatic diamines using triphenyl phosphite and pyridine as condensing agents in the N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride. The resulting polyamides had inherent viscosities higher than 0.74 and up to 2.10 dL/g. All of these polyamides were soluble in polar solvents, such as NMP, DMF, N,N-dimethylacetamide (DMAc), and dimethyl sulfoxide. Transparent, flexible, and tough films could be cast from their DMAc or NMP solutions. The solvent-cast films had high tensile strengths and moduli. Extensions to break were relatively low, except for the polymers derived from 2,2-bis[4-(4-aminophenoxy)phenyl]hexafluoropropane and 3,4′-oxydianiline, which had elongations of 82 and 62%, respectively. Except for the polyamide based on p-phenylenediamine, all the other polyamides were amorphous in nature. All the polymers are thermally stable to temperatures in excess of 450°C in either air or nitrogen atmosphere. The polymers exhibited glass transition temperatures ranging from 183 to 260°C and decomposition temperatures (10% weight loss) ranging from 462–523°C in air and 468–530°C in nitrogen. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3385–3391, 1997     

Synthesis and properties of new soluble N-phenyl–substituted aromatic-aliphatic and all aromatic polyamides derived from 4,4′-dianilinobiphenyl

New N-phenylated aromatic-aliphatic and all aromatic polyamides were prepared by the high-temperature solution polycondensation of 4,4′-dianilinobiphenyl with both aliphatic (methylene chain lengths of 6–11) and aromatic dicarboxylic acid chlorides. All of the aromatic-aliphatic polyamides and the wholly aromatic polyamides exhibited an amorphous nature and good solubility in amide-type and chlorinated hydrocarbon solvents, except for those aromatic polyamides containing p-oriented phenylene or biphenylylene linkages in the backbone; the latter were crystalline and insoluble in organic solvents except m-cresol. The N-phenylated aromatic-aliphatic polyamides and aromatic polyamides had glass transition temperatures in the range of 79–116°C and 207–255°C, respectively, and all the polymers were thermally stable with decomposition temperatures above 400°C in air. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2193–2200, 1998