Photochemical Reactions of N‐(2‐Halogenoalkanoyl) Derivatives of Anilines

The photochemical reactions of 2‐substituted N‐(2‐halogenoalkanoyl) derivatives 1 of anilines and 5 of cyclic amines are described. Under irradiation, 2‐bromo‐2‐methylpropananilides 1a – e undergo exclusively dehydrobromination to give N‐aryl‐2‐methylprop‐2‐enamides (=methacrylanilides) 3a – e (Scheme 1 and Table 1). On irradiation of N‐alkyl‐ and N‐phenyl‐substituted 2‐bromo‐2‐methylpropananilides 1f – m , cyclization products, i.e. 1,3‐dihydro‐2H‐indol‐2‐ones (=oxindoles) 2f – m and 3,4‐dihydroquinolin‐2(1H)‐ones (=dihydrocarbostyrils) 4f – m , are obtained, besides 3f – m . On the other hand, irradiation of N‐methyl‐substituted 2‐chloro‐2‐phenylacetanilides 1o – q and 2‐chloroacetanilide 1r gives oxindoles 2o – r as the sole product, but in low yields (Scheme 3 and Table 2). The photocyclization of the corresponding N‐phenyl derivatives 1s – v to oxindoles 2s – v proceeds smoothly. A plausible mechanism for the formation of the photoproducts is proposed (Scheme 4). Irradiation of N‐(2‐halogenoalkanoyl) derivatives of cyclic amines 5a – c yields the cyclization products, i.e. five‐membered lactams 6a , b , and/or dehydrohalogenation products 7a , c and their cyclization products 8a , c , depending on the ring size of the amines (Scheme 5 and Table 3).     

Versuche zur Synthese von Nonafulvenen und von Nonaheptafulvalen

Attempted Synthesis of Nonafulvenes and of Nonaheptafulvalene The reaction of cyclononatetraenide with α-bromobenzyl acetate ( 6 ) as well as with 1,1-dihalodimethylether gives at ?50°, instead of the expected cyclononatetraenes, bicyclo[6.1.0]nona-2,4,6-triene derivatives 10d and 16 (Scheme 3 and 5, respectively). It seems that in some cases the well known thermally disrotative valence isomerization of cyclononatetraenes 7 to 3a, 7a-dihydroindenes 8 is much slower than the formation of bicyclo[6.1.0]nona-2,4,6-trienes of the type 10 and 16 . This type of reaction hurts the Woodward-Hoffmann rules. Possible precursors of the attractive nonaheptafulvalene are prepared by reaction of acetoxy-tropylium fluoborate ( 19a ) as well as of bromo-tropylium bromide ( 19b ) with lithium-cyclononatetraenide (Scheme 8). So far, the attempted gas-phase pyrolysis of the precursors 21a and 21b failed to give nonaheptafulvalene (5).     

Technische Verfahren zur Synthese von Carotinoiden und verwandten Verbindungen aus 6-Oxo-isophoron. III. Ein neues Konzept für die Synthese der enantiomeren Astaxanthine

Technical Procedures for the Synthesis of Carotenoids and Related Compounds from 6-Oxo-isophorone. III. A New Concept for the Synthesis of the Enantiomeric Astaxanthins A new and efficient concept for the total synthesis of (3S, 3'S)- and (3R, 3'R)-astaxanthin ( 1a and 1c , resp.) in high overall yield and up to 99,2% enantiomeric purity is described. Key intermediates are the (S)- and (R)-acetals 10 and 17 , respectively (Scheme 2). These chiral building blocks were synthesized via three different routes: a) functionalization of the enantiomeric 3-hydroxy-6-oxo-isophorons⁴) 2 and 11 , respectively (Scheme 2); b) optical resolution of 3,4-dihydroxy-compound⁴) 19 (Scheme 3), and c) fermentative reductions of 6-oxo-isophorone derivatives (Schemes 4 and 5). - The absolute configurations of the two intermediates 12 and 13 (Scheme 2) have been confirmed by X-ray analysis. - The final steps leading to the enantiomeric astaxanthins are identical with those described for optically inactive astaxanthin [1].     

4,4-Disubstituierte Imidazol-Derivate aus der Umsetzung von 3-Amino-2H-azirinen mit Salicylamid

4,4-Disubstituted Imidazole Derivatives from the Reaction of 3-Amino-2H-azirines with Salicylamide Reaction of 3-amino-2H-azirines 1a–c with salicylamide ( 7 ) in MeCN leads to imidazoles 10 and 11 in different rates, depending on the conditions. In the case of 1a and 1b, 11a and 11b , respectively, have been obtained as the main product at 50°; in reactions at 80°, 10a and 10b are the favored products (Tables 1 and 2). 2,2-Dimethyl-3-(N-methyl-N-phenylamino)-2H-azirine ( 1c ) reacts with 7 in MeCN mainly to 2-(2-hydroxyphenyl)-5,5-dimethyl-3,5-dihydroimidazol-4-one ( 10a ); in boiling toluene, 11c is formed with low preference (Table 3). The structure of the products has been established by spectroscopic means, and in the case of 10b and 11c , by X-ray crystallography. Two different reaction mechanisms for the formation of the products are discussed (Scheme 2).     

Intramolekulare Inversionssubstitution am Dreiring von 77exo-Brombicyclo[4.1.0]heptan-3endo-ol unter Bildung eines Tetrahydrofuranringes

Intramolecular Substitution under Inversion at the Threemembered Ring of 7exo-Bromobicyclo[4.1.0]heptan-3endo-ol yielding a Tetrahydrofuran Ring The reaction 1a → 2a involving substitution at a cyclopropane carbon atom can be observed only with the bromophilic alkyllithium reagents but not with the bases lithium diisopropyl amide (LDA) (Table 1) or potassium t-butoxide (KTB). The mechanism must be an insertion as outlined in Scheme 1. - The monobromides 1b , 1c and 1d are prepared stereoselectively from the acetal 3a . Again, cyclization of 1b takes only place with LDA in the presence of alkyllithium (Table 2, entries 1--4) suggesting an insertion mechanism (route (a) or (b) in Scheme 2). In contrast, KTB effects the substitution in high yield with no loss (from 1c ) or incorporation of deuterium at the cyclopropane substitution center (Table 2, entries 5--7); the possibility is discussed that this process is an S_N2-type reaction.     

Mono- and Dialkylation of Derivatives of (1R, 2S)-2-Hydroxycyclopentanecarboxylic Acid and -cyclohexanecarboxylic acid via bicyclic dioxanones: Selective generation of three contiguous stereogenic centers on a cyclohexane ring

Ethyl (1R, 2S)-2-hydroxycyclopentanecarboxylate and -cyclohexanecarboxylate ( 1a and 2a , respectively) obtained in 40 and 70% yield by reduction of 3-oxocyclopentanecarboxylate and cyclohexanecarboxylate, respectively (Scheme 2), with non-fermenting yeast, are converted to bicyclic dioxanone derivatives 3 and 4 with formaldehyde, isobutyraldehyde, and pivalaldehyde (Scheme 3). The Li-enolates of these dioxanones are alkylated (→ 5a – 5i , 5j , 6a – 6g ), hydroxyalkylated (→ 51, m, 6d, e ), acylated (→ 5k, 6c ) and phenylselenenylated (→ 7 – 9 ) with usually high yields and excellent diastereoselectivities (Scheme 3, Tables and 2). All the major isomers formed under kinetic control are shown to have cis-fused bicyclic structures. Oxidation of the seleno compounds 7–9 leads to α, β-unsaturated carbonyl derivatives 10 – 13 (Scheme 3) of which the products 12a – c with the C?C bond in the carbocyclic ring (exocyclic on the dioxanone ring) are most readily isolated (70–80% from the saturated precursors). Michael addition of Cu(I)-containing reagents to 12a – c and subsequent alkylations afford dioxanones 14a – i and 16a – d with trans-fused cyclohoxane ring (Scheme 4). All enolate alkylations are carried out in the presence of the cyclic urea DMPU as a cosolvent. The configuration of the products is established by NMR measurements and chemical correlation. Some of the products are converted to single isomers of monocyclic hydroxycyclopentane ( 17 – 19 ) and cyclohexane derivatives ( 20 – 23 ; Scheme 5). Possible uses of the described reactions for EPC synthesis are outlined. The observed steric course of the reactions is discussed and compared with that of analogous transformations of monocyclic and acyclic derivatives.     

Synthese von Trifluoromethyl-substituierten Schwefel-Heterocyclen unter Verwendung von 3,3,3-Trifluorobrenztraubensäure-Derivaten

Synthesis of Trifluoromethyl-Substituted Sulfur Heterocycles Using 3,3,3-Trifluoropyruvic-Acid Derivatives The reaction of methyl 3,3,3-trifluoropyruvate ( 1 ) with 2,5-dihydro-1,3,4-thiadiazoles 4a, b in benzene at 45° yielded the corresponding methyl 5-(trifluoromethyl)-1,3-oxathiolane-5-carboxylates 5a, b (Scheme 1) via a regioselective 1,3-dipolar cycloaddition of an intermediate ‘thiocarbonyl ylide’ of type 3 . With methyl pyruvate, 4a reacted similarly to give 6 in good yield. Methyl 2-diazo-3,3,3-trifluoropropanoate ( 2 ) and thiobenzophenone ( 7a ) in toluene underwent a reaction at 50°; the only product detected in the reaction mixture was thiirane 8a (Scheme 2). With the less reactive thiocarbonyl compounds 9H-xanthene-9-thione ( 7b ) and 9H-thioxanthene-9-thione ( 7c ) as well as with 1,3-thiazole-5(4H)-thione 12 , diazo compound 2 reacted only in the presence of catalytic amounts of Rh₂(OAc)₄. In the cases of 7a and 7b , thiiranes 8b and 8c , respectively, were the sole products (Scheme 3). The crystal struture of 8c has been established by X-ray crystallography (Fig.). In the reaction with 12 , desulfurization of the primarily formed thiirane 14 gave the methyl 3,3,3-trifluoro-2-(4,5-dihydro-1,3-thiazol-5-ylidene)propanoates (E)-and (Z)- 15 (Scheme 4). A mechanism of the Rh-catalyzed reaction via a carbene addition to the thiocarbonyl S-atom is proposed in Scheme 5.     

13C-NMR.-Spektroskopie von Organolithiumverbindungen bei tiefen Temperaturen. Strukturinformation aus der 13C, 6Li-Kopplung

Low-Temperature ¹³C-NMR. Spectroscopy of Organolithium Derivatives. - ¹³C, ⁶Li-Coupling, a Powerful Structural Information The ¹³C-NMR. spectra of thirteen lithiated hydrocarbons ( 1c–13c . Table 2) and of eighteen a-halo-lithium carbenoids ( 14c–31c , Table 3) have been recorded in donor solvent (R₂O, R₃N) mixtures at temperatures down to ?150°. The organolithium species were generated from singly or doubly ¹³C-labelled precursors by H/⁶Li- or Br/⁶-exchange. - ¹³C, ⁶Li-Coupling was observed of all species but those which supposedly contain contact ion pair C,Li-bonds (benzylic and acetylenic derivatives). The multiplicities of the signals are correlated with the degree of aggregation in solution: the triplets of the halocarbenoids must arise from monomers or heteroatom-bridged oligomers, the quintuplets of butyl-, cyclopropyl-, bycyclo[1.1.0]butyl-, vinyl-, and phenyllithium from dimers with planar arrangement of two Li- and two C-atoms, as known from crystal structures (Scheme 3). All ¹³C, ⁶Li-couplings are temperature-dependent, dynamic processes cause them to disappear above ca. ?70° (Fig. 1–4). - Types of organolithium compounds are categorized according to the change of chemical shift δΔ (H, Li) upon H/Li-substitution, according to the ¹³C, ⁶Li-coupling constants ranging from 0 to 17 Hz, and according to the multiplicities which indicate the aggregation: type A are Li-derivatives of alkanes and cycloalkanes, type B are s?-bonded vinyl, aryl, and alinyl derivatives, type C are a-heterosubstituted (RS, hetero=halogen) organolithium compounds, and type D are π-bonded allylic and benzylic systems (Table 5). The C,Li-distances in the crystal structures of representatives of all four classes are within the small range of 2.18–2.28 Å (cf. Scheme 3). - Some surprising observations and their interpretations and consequences are: (a) butyllithium solutions in THF, THF/TMEDA, and dimethyl ether contain increasing amounts of dimer upon cooling, the equilibrium (tetramer · 4 THF)+4 THF ? 2 (dimer · 4 THF) being shifted to the right (Fig. 1 and Scheme 4); thus, more of a different species is present at low temperatures, with the accompanying changes in reactivity; (b) mixed higher aggregates are formed upon addition of butyllithium to bicyclobutyllithium; these are broken up to dimers upon addition of TMEDA (Tetramethylethylene-diamine) (Fig. 2 and Scheme 5); (c) the solid state, the calculated gas-phase and the solution species of phenyllithium all have dimeric structures, and so do vinyl and cyclopropyl lithium derivatives; the ¹³C-deshielding observed upon replacement of H by Li on sp²- and sp-C-atoms is related to a polarization of the π-electrons (Table 3, Fig. 3 and Scheme 6); (d) the spectra of halo-lithium carbenoids show three striking features as compared to the C,H-compound: deshielding of up to 280 ppm (Table 3), strong decrease of the coupling constant with ¹H- and ¹³C-nuclei attached to the carbenoid C-atom (Table 4), and a structure-independant, almost constant, large ¹³C, ⁶Li-coupling constant of 17 Hz (Table 3); as shown in Scheme 7, these effects might be the consequence of a reduced degree of hybridization of the carbenoid C-atom. - The preparation of the labelled compounds and the generation of solutions of the organolithium compounds for NMR. measurements are described in full detail.     

Synthese von Alkylphenolen und -pyrocatecholen aus Plectranthus albidus (Labiatae)

Synthesis of Alkylphenols and -catechols from Plectranthus albidus (Labiatae) In the preceding paper, we described the isolation and structure elucidation of a series of even-numbered phenol- or pyrocatechol-derived 1-arylalkane-5-ones. To establish the assigned structures unambiguously and to have larger quantities available for physiological testing, the following compounds were prepared: in the alkylphenol series, 1-(4′-hydroxyphenyl)tetradecan-5-one ( 2a ), 1-(4′-hydroxyphenyl)hexadecan-5-one ( 2b ), and 1-(4′-hydroxyphenyl)octadecan-5-one ( 2c ); in the alkylcatechol series, 1-(3′,4′-dihydroxyphenyl)decan-5-one ( 3a ; not isolated as a natural compound), 1-(3′,4′-dihydroxyphenyl)dodecan-5-one ( 3b ), 1-(3′,4′-dihydroxyphenyl)tetradecan-5-one ( 3c ), 1-(3′,4′-dihydroxyphenyl)hexadecan-5-one ( 3d ), 1-(3′,4′-dihydroxyphenyl)octadecan-5-one ( 3e ), and 1-(3′,4′-dihydroxyphenyl)icosan-5-one ( 3f ); in the alkenylphenol series, (Z)-1-(4′-hydroxyphenyl)octadec-13-en-5-one ( 4a ) and (E)-1-(4′-hydroxyphenyl)octadec-13-en-5-one ( 4b ); in the alkenylcatechol series, (E,E)-1-(3′,4′-dihydroxyphenyl)deca-1,3-dien-5-one ( 1 ) and (Z)-1-(3′,4′-dihydroxyphenyl)octadec-13-en-5-one ( 5 ). All compounds proved to be identical with the previously assigned structures. Compound 1 was synthesized by regioselective aldol condensation of heptan-2-one with (E)-1-(3′,4′-dimethoxyphenyl)prop-2-enal ( 6d ; Scheme 1), the phenols 2a–c and the catechols 3a–f by addition of the corresponding alkyl Grignard reagent to 5-(4′-methoxyphenyl)- or 5-(3′,4′-dimethoxyphenyl)pentanal ( 17c and 18c , resp.; Scheme 4), and the olefins 4a, 4b and 5 from 17c or 18c via the 9-O-silyl-protected 13-(4′-methoxyphenyl)- or 13-(3′,4′-dimethoxyphenyl)tridecanals ( 26 and 27 , resp.) and Wittig olefination as the key steps (Scheme 5).     

Doppelt und dreifach funktionalisierte,enantiomerenreine C4-Synthesebausteine aus β-Hydroxybuttersäure, Äpfelsäure und Weinsäure

Enantiomerically Pure Synthetic Building Blocks with Four C-Atoms and Two or Three Functional Groups from β-Hydroxy-butanoic, Malic, and Tartaric Acid The pool of chiral, non-racemic electrophilic building blocks, which are available from simple natural products in both enantiomeric forms is enlarged by the epoxides 3, 5 , and 10 , by the tosylate 12a , and by the aldehydes 18 (cf. symbols A-D , 14 , and Scheme 1). Key steps of the conversions leading from hydroxyacids to the building blocks are: epoxide-opening by triethylborohydride ( 1 → 2a ) and tosylate reduction ( 12a → 12b ); the Mitsunobu inversion ( 2a → 4a ); the reduction of (R, R)-tartaric ester to (R)-malic ester by NBS (N-bromosuccinimide) opening of the benzaldehyde acetal 8 and tin hydride reduction ( 6c → 7c ); the enantiomer enrichment of optically active ethyl β-hydroxy-butanoate through the crystalline dinitrobenzoate 21b . Detailed procedures are given for large scale preparations of the key intermediates. The enantiomeric purities of the building blocks are secured by correlations.     

α,α-Disubstituted Allyl Sulfones: An approach to the synthesis of vinyl-branched pheromone analogues

The two-step alkylation of phenyl prop-2-enyl sulfone ( 1 ) with protected ω-bromoalkanols and 1-iodoalkanes (→ 3 ; see Scheme 1) followed by a Pd-catalyzed desulfonylation with LiBH₄ affords a 96:4 mixture of vinylbranched, protected alcohols and corresponding ethylidene-branched isomers (see Scheme 2; 4 and 5 , respectively). By utilizing the large difference in reactivity of mono- and trisubstituted C?C bonds towards singlet oxygen, the ethylidene derivatives are easily removed from the mixture by photo-oxygenation. The vinyl-branched compounds are inert to this reaction and can be conveniently isolated in highly pure form (99.5%) and ca. 45% overall yield.     

First Examples of Reactions of Azole N-Oxides with Thioketones: A Novel Type of Sulfur-Transfer Reaction

The reactions of 1,4,5-trisubstituted imidazole 3-oxides 1a – k with cyclobutanethiones 5a , b in CHCl₃ at room temperature give imidazole-2(3H)-thiones 9a – k in high yield. The second product formed in this reaction is 2,2,4,4-tetramethylcyclobutane-1,3-dione ( 6a ; Scheme 2). Similar reactions occur with 1 and adamantanethione ( 5c ) as thiocarbonyl compound, as well as with 1,2,4-triazole-4-oxide derivative 10 and 5a (Scheme 3). A reaction mechanism by a two-step formation of the formal cycloadduct of type 7 via zwitterion 16 is proposed in Scheme 5. Spontaneous decomposition of 7 yields the products of this novel sulfur-transfer reaction. The starting imidazole 3-oxides are conveniently prepared by heating a mixture of 1,3,5-trisubstituted hexahydro-1,3,5-triazines 3 and α-(hydroxyimino) ketones 2 in EtOH (cf. Scheme 1). As demonstrated in the case of 9d , a `one-pot' procedure allows the preparation of 9 without isolation of the imidazole 3-oxides 1 . The reaction of 1c with thioketene 12 leads to a mixture of four products (Scheme 4). The minor products, 9c and the ketene 15 , result from an analogous sulfur-transfer reaction (Path a in Scheme 5), whereas the parent imidazole 14 and thiiranone 13 are the products of an oxygen-transfer reaction (Path b in Scheme 5).     

[(1,3-Dioxolan-2-yliden)methyl]phosphonate und -phosphinate als (einfache) Synthone in der Heterocyclensynthese

[(1,3-Dioxolan-2-ylidene)methyl]phosphonates and -phosphinates as [simple] Synthons in Heterocyclic Synthesis The readily available [(1,3-dioxolane-2-ylidene)methyl]phosphonates and -phosphinates 2a–f (Scheme 1) can be transformed with amines to aliphatic ketene N,O-and N,N-acetales (see Scheme 2, 2a → 3–7 ). Alkanediamines yield with 2a–f the imidazolidines 8a–f and the hexahydropyrimidines 9a–d (Scheme 3). the oxazolidine derivatives 10a–e and the thiazolidine 11 are accessible under special reaction conditions starting from 2a, b (Scheme 4). Hydrazines react with the CN-group-containing ketene O,O-acetals 2a–c to the pyrazoles 12a–g , whereof 12a, d, e can be cyclized to pyrazolo[1,5-a]pyrimidines 13a–d (Scheme 5). Amidines as starting materials transform 2a–c in an analogous way to the pyrimidine derivatives 14a–c (Scheme 6).     

Photochemische Cycloadditionen von 3-Phenyl-2H-azirinen mit Benzoyl-, Äthoxycarbonyl- und Vinylphosphonaten 34. Mitteilung über Photoreaktionen

The irradiation of the 3-phenyl-2H-azirines 1a–c in the presence of diethyl benzoylphosphonate ( 8 ) in cyclonexane solution, using a mercury high pressure lamp (pyrex filter), yields the diethyl (4, 5-diphenyl-3-oxazolin-5-yl)-phosphonates 9a–c (Scheme 3). In the case of 1b a mixture of two diastereomeric 3-oxazolines, resulting from a regiospecific but non-stereospecific cycloaddition of the benzonitrile-benzylide dipole 2b to the carbonyl group of the phosphonate 8 , was isolated. Benzonitrile-isopropylide ( 2a ), generated from 2,2-dimethyl-3-phenyl-2H-azirine ( 1a ), undergoes a cycloaddition reaction to the ester-carbonyl group of diethyl ethoxycarbonylphosphonate ( 15 ) with the same regiospecificity to give the 3-oxazoline derivative 16 (Scheme 5). The azirines 1a–c , on irradiation in benzene in the presence of diethyl vinylphosphonate ( 17 ) give non-regiospecifically the Δ¹-pyrrolines 13a–c and 14a–c (Scheme 6).     

Synthesis and isolation of chloro‐β‐carbolines obtained by chlorination of β‐carboline alkaloids in solution and in solid state

β‐Carbolines (1‐5) undergo electrophilic aromatic substitution with N‐chlorosuccinimide and N‐chlorobenzotriazole under different experimental conditions. Although 6‐chloro and 8‐chloro‐nor‐har‐mane ( 1a and 1b ) and 6‐chloro and 8‐chloro‐harmane ( 2a and 2b ) obtained by chlorination with sodium hypochlorite of nor‐harmane (1) and harmane (2) were isolated and fully characterized recently, other chloroderivatives of nor‐harmane and harmane have never been described. The preparation and subsequent isolation, purification and full characterization of the dichloroderivatives 1c and 2c are reported (mp, R_f, ¹H nmr, ¹³C nmr and ms) together with the preparation, isolation and charaterization, for the first time, of the chloroderivatives obtained from harmine (3a‐3c) , harmol (4a‐4b) and 7‐acetylharmol (5a‐5c) . As chlorinating reagent N‐chlorosuccinimide and N‐chlorobenzotriazole in solution as well as the β‐carboline ‐N‐chlorosuccinimide solid mixture have been used and their uses have been compared. Gc (t_R) and gc‐ms (m/z) data for other monochloro derivative of nor‐harmane (1d) and monochloro‐ and dichloroderivatives of harmane ( 2d and 2e‐2f ), obtained in trace amounts, are also included (Scheme 1 and Table I). Semiempirical AM1 and PM3 calculations have been performed in order to predict reactivity in terms of the energies of HOMO‐LUMO difference and in terms of the charge density of β‐carbolines (1‐5) and chloro‐β‐carbolines ( 1a‐1c, 2a‐2c, 3a‐3c, 4a‐4b , and 5a‐5c ) (Scheme 1). Theoretical and experimental results are discussed briefly.     

Polymer- and Dendrimer-Bound Ti-TADDOLates in Catalytic (and Stoichiometric) Enantioselective Reactions: Are pentacoordinate cationic Ti complexes the catalytically active species?

α,α,α′,α′-Tetraaryl-1,3-dioxolane-4,5-dimethanols (TADDOLs), containing styryl groups either at C(2) of the heterocyclic ring or in the α-position, were prepared in the usual way ( 18–22, 24, 25 ). These compounds were copolymerized with styrene and divinylbenzene in a suspension, yielding polymers ( 33–40 , Scheme 3) as beads with a rather uniform particle-size distribution (150–45 μm), swellable in common organic solvents. HOCH₂- and BrCH₂-substituted TADDOLs were also prepared and used for attachement to Merrifield resin or to dendritic molecules ( 23, 26–32 ). The TADDOL moieties in these materials are accessible to form Ti (and Al) complexes (Scheme 4) which can be used as polymer- or dendrimer-bound reagents (stoichiometric) or Lewis acids (catalytic). The reactions studied with these new chiral auxiliaries are: enantioselective nucleophilic additions to aldehydes (of R₂Zn and RTi(OCHMe₂)₃; Scheme 5, Table 1) and to ketones (of LiAlH₄, Table 2); enantioselective ring opening of meso-anhydrides (Scheme 6); [4+2] and [3+2] cycloadditions of 3-crotonyl-1,3-oxazolidin-2-one to cyclopentadiene and to (Z)-N-benzylidenephenylamine N-oxide ( → 48, 49 , Scheme 7, Tables 3, 4, and Fig. 5). The enantioselectivities reached with most of the polymer-bound or dendritic TADDOL ligands were comparable or identical to those observed with the soluble analogs. The activity of the polymer-bound Lewis acids was only slightly reduced as compared with that encountered under homogeneous conditions. Multiple use of the beads (up to 10 times), without decreased performance, has been demonstrated (Figs. 3 and 4). The poorer selectivity in the Diels-Alder reaction (Scheme 7a), induced by the polymer-bound Cl₂Ti-TADDOLate as compared to the soluble one, is taken as an opportunity to discuss the mechanism of this Lewis-acid catalysis, and to propose a cationic, trigonal-bipyramidal complex as the catalytically active species (Fig. 6). It is suggested that similar cations may be involved in other Ti-TADDOLate-mediated reactions as well.     

Generation and Trapping of Triafulvene

Substituted methylidenecyclopropanes 12a – d , being easily available from 1,1-dibromo-2-(phenylthio)-cyclopropane ( 9a ), are attractive precursors of triafulvene (2-methylidene-1-cyclopropene; 1 ). Both the sulfoxide 12b and the sulfone 12c react with an excess of alkoxides (t-BuOK and NaOMe) to give 12e and 12f , respectively, while the sulfinyl group of 12b may be replaced by the PhCH₂S substituent in the presence of PhCH₂SH/t-BuOK. These reactions (Scheme 4) may be explained by assuming 1 as a reactive intermediate, although an alternative sequence including carbene 20 (Scheme 6) is not completely ruled out. D -labelling experiments (Scheme 5) do not give conclusive evidence due to D scrambling, but deprotonation/methylation sequences show that H? C(2) of 12a – c is the most acidic proton. Final evidence for 1 results from the reaction of 12d with cyclopentadienide (Scheme 7): the reaction of 1 with cyclopentadiene produces the expected [4 + 2]-cycloaddition product 23 , while some mechanistic insight results from the sequence 12d → 24 → 25 .     

Oxidative Coupling Of 2-Alkyl-6,6-dimethylpentafulvenyl Anions

Cucl₂-Induced oxidative coupling of 2-(tert-butyl)-6,6-dimethylpentafulvenyl anion 9 predominantly takes place at C(7) and C(5) to give [7–7] and [7–5] coupling products 15 and 16 in 35 and 47% yields, respectively (Scheme 3) whose structures are elucidated from 1D- and 2D-NMR analysis. Compared with the product distribution observed for 6,6-dimethylpentafulvenyl anion 2 (Scheme 1), no coupling at C(2)/C(3) of 9 is observed. This means that, besides electronic effects, steric effect are also important in oxidative couplings of fulvenyl anions. The same couplings occur in the case of 2,3-bis(6,6-dimethylfulven-2-yl)-2,3-dimethylbutane dianion 10 as well but, due to electronic as well as conformational effects (Scheme 5), intermolecular coupling (to give polymers 17 , Scheme 4) is strongly favored over intermolecular coupling. Mechanisms explaining base-catalyzed isomerization 15a ? 15b ? 15c (Scheme 6) as well as isomerization 16a ? 16b (Scheme 7) are proposed.     

Heteroleptische Diorganylzink-Verbindungen mit einem Bis(trimethylsilyl)phosphanido-Substituenten

Heteroleptic Diorganylzinc Compounds with a Bis(trimethylsilyl)phosphido Substituent Dialkylzinc ZnR₂ (Me, Et, iso-Pr, nBu, tBu, CH₂SiMe₃) reacts with one equivalent of bis(trimethylsilyl)-phosphine in carbohydrates to the heteroleptic compounds RZnP(SiMe₃)₂; dependent from the steric demand of the alkyl group R the derivatives are dimeric or trimeric in solution as well as in the solid state. Monomeric bis(trimethylsilyl)phosphido-tris(trimethylsilyl)methylzinc yields from the reaction of lithium tris(trimethylsilyl)methanide and lithium bis(trimethylsilyl)phosphide with zinc(II) chloride. Bis(trimethylsilyl)phosphido-methylzinc crystallizes in the orthorhombic space group P2₁2₁2₁ with {a = 1 007.6(1); b = 1 872.3(3); c = 2 231.0(4) pm; Z = 4} as a trimeric molecule with a central cyclic Zn₃P₃ moiety in the twist-boat conformation. Bis(trimethylsilyl)phosphido-n-butylzinc, that crystallizes in the orthorombic space group Pben with {a = 1 261.7(2); b = 2 253.0(4); c = 1 798.9(2) pm; Z = 4}, shows a simular central Zn₃P₃ fragment. The sterically more demanding trimethylsilylmethyl substituent leads to the formation of a dimeric molecule of bis(trimethylsilyl)phosphido-trimethylsilylmethylzinc {monoklin, P2₁/c; a = 907.2(4); b = 2 079.8(8), c = 1 070,2(3) pm; β = 103,48(1)°; Z = 2}. Bis(trimethylsilyl)phosphido-iso-propylzinc shows in solution a temperature-dependent equilibrium of the dimeric and trimeric species; the crystalline state contains a 1:1 mixture of these two oligomers {orthorhombisch; Pbca; a = 1 859.0(3); b = 2 470.9(2); c = 3 450.7(3) pm; Z = 8}. The Zn? P bond lengths vary in a narrow range around 239 pm, the Zn? C distances were found between 196 and 203 pm.     

Diasteroselektive Hydroxyalkylierungen in 1-Stellung von Tetrahydroisochinolinen und Synthese von Aporphin-, Protoberberin- und Phthalid-Alkaloider

Diastereoselective Hydroxyalkylations in Position 1 of Tetrahydroisoquinolines and Synthesis of Aporphine, Protoberberine, and Pathalide Alkaloids Unsubstituted and 6,7-dialkoxy-N-pivaloyl-tetrahydroisoquinolines 1 – 3 are converted to 1-bromomagnesium derivatives by sequential treatment with t-BuLi (?75°/THF) and MBr₂.OEt₂. Addition of the metalated tetrahydroisoquinolines to aliphatic or aromatic aldehydes occurs with relative topicity ul (Scheme 2). The 1-hydroxyalkylated 2-pivaloyl-tetrahydroisoquinolines a of u-configuration thus obtained (14 examples) can be converted to free aminoalcohols c of either l-or u-configuration (9 examples; Scheme 3). The depivaloylation with retention (→ u-c) is best achieved by heating in EtOH/KOH, the conversion to 1-aminoalcohols l-c by treatment with CF₃COOH/(CF₃CO)₂O (→ l,-pivalates l-b), followed by alkaline saponification or by LiAlH₄ reduction of the esters. The configuration of the products is assigned by ¹H-NMR spectroscopy, by X-ray crystal structure analysis, by chemical correlation, and by comparison of the chemical properties of the l- and the u-isomers. The diastereoselective hydroxybenzylation of the tetrahydroisoquinoline is used for short syntheses of ushinsunine/oliveroline (Scheme 4), β-hydrastine, and ophiocarpine/epiopliocarpine (Scheme 6; aporphine, phthalide, and protoberberine alkaloids, respectively).