P-N COMPOUNDS 28. PHOSPHAMINIMIDES 3. 4-NITROBENZYLATION OF PHOSPHINYL-1, 1-DIMETHYL HYDRAZIDES AND FORMATION OF A UNIQUE HYDRAZINIUM INNER SALT1

Abstract

The treatment of diethoxyphosphinyl-1,1-dimethylhydrazide with 4-nitrobenzylbromide at 82–90°C resulted in the loss of EtBr and the formation of EtO(^?O)P(O) NHN⁺(CH₃)₂CH₂-4-NO₂Ph, a novel type of phosphaminimide. At lower temperatures the diethoxyhydrazide gave the hydrazinium bromide which slowly underwent loss of EtBr to yield the same product. The diphenoxy compound similarly lost HBr at high, but not lower, temperature with production of the normal phosphaminimide. The diphenyl derivative yielded the expected hydrazinium bromide which was dehydrobrominated to the usual phosphaminide with NaOH. The reaction between all three hydrazides and iodomethane, followed by dehydroiodination, gave the usual phosphaminimides.     

Combined study of thermochemical properties of nitroform and its salts

A combined method for determination of the standard enthalpies of formation of nitroform and its salts was proposed. The enthalpies of dissolution of nitroform and its ammonium, hydrazinium, guanidinium, and potassium salts in water were measured. The enthalpy of combustion of hydrazinium salt of nitroform was determined by a combustion calorimetry, and its standard enthalpy of formation was calculated. The enthalpy of formation of trinitromethyl anion in indefinitely diluted aqueous solution −24.94±0.79 kJ mol⁻¹, was calculated on the basic of the data obtained for enthalpies of formation and dissolution of ammonium and hydrazinium salts of nitroform. Standard enthalpies of formation of nitroform and its salts were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2451–2454, December, 1998.     

Amidrazones V. thermolysis of N1-benzyl-substituted amidrazone ylides

Thermolysis of 1,1-dimethyl-1-benzyl-2-(iminophenylmethyl)hydrazinium hydroxide inner salt gave dimethylamine, 2,4,6-triphenyl-s-triazine and 2,4,6-triphenyl-1,2-dihydro-s-triazine.     

Methylglyoxal bis-(<Emphasis Type="Italic">N,N</Emphasis>-dimethylhydrazone): Synthesis and some reactions

Methods were proposed for the synthesis of the methylglyoxal 1,2-bis-(N,N-dimethylhydrazone). A possibility was shown for the first time of its participation in the Diels-Alder reaction with maleic anhydride as an electron-rich diene. The second reaction of these reagents, which is observed in a wet media, is the formation of the hydrazinium salt of the initial diene with maleic acid. The most probable structure of the protonated diene among the four possible forms was revealed by the quantum-chemical calculations of the energy of the molecules and by the analysis of the ¹³C NMR chemical shifts.     

A new process using a redox type of ion exchanger for cesium separation

A sorption-desorption-regeneration cycle composed of sorption of cesium on the sorbent in reduced state from strong nitric acid medium in the presence of an inhibitor such as hydrazinium salt, desorption of cesium by converting the spent sorbent into an oxidized state with a strong nitric acid eluent containing nitrous acid, and regeneration of the sorbent with a reducing agent such as hydrazinium salt was found to be possible with practically no loss of the sorbents when insoluble hexacyanoferrates of copper were used as redox type of ion exchangers.     

New synthetic approaches to bridgehead nitrogen heterocycles. Derived from 3‐amino‐2,3‐dihydro‐5,6‐dimethyl‐2‐thioxothieno[2,3‐d]pyrimidin‐4(1H)‐one and its salts

Bridgehead nitrogen heterocycles 3a , b and 6a , b containing the thieno‐pyrimidine system have been prepared from the versatile intermediates 3‐amino‐2,3‐dihydro‐5,6‐dimethyl‐2‐thioxo‐thieno[2,3‐d]pyrimidin‐4‐(1H)‐one 1 and its hydrazinium or potassium salts 4 ; their structural elucidation is also reported.     

Reactions of 1-[Benzoyl(2-hetaroyl)]-2,2-dimethyhydrazines with 1,3-Dibromopropyne, 2-Propynyl Bromide,and Allyl Bromide

Reactions of 1-[benzoyl(2-hetaroyl)]-2,2-dimethyhydrazines with 1,3-dibromopropyne in MeOH at 50°C afforded 2-phenyl(heteryl)-6-bromomethylidene-4,4-dimethyl-5H-1,3,4-oxadiazinium bromides. Reactions of 1-[benzoyl(2-hetaroyl)]-2,2-dimethyhydrazines with propargyl bromide and allyl bromide gave rise to 1,1-dimethyl-1-(2-propyn-1-yl)- and 1,1-dimethyl-1-(2-propen-1-yl)-2-benzoyl(hetaroyl)hydrazinium bromides. On treating these compounds with NaOH solution the corresponding imides were obtained.     

Synthesis of fluorine-containing alkyl 2-cyano-3-oxocarboxylates. Reactions with nucleophiles

Fluorine-containing alkyl 2-cyano-3-oxocarboxylates were synthesized for the first time by the reaction of ethyl cyanoacetate with fluorine-substituted carboxylic acid halides or alkyl carboxylates. The reactions with hydrazine hydrate, phenylhydrazine, ando-phenylenediamine give hydrazinium (ammonium) enolates or products of acid decomposition. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1961–1965, October, 1999.     

1,1-Dimethyl-1-(trialkoxysilylmethyl)hydrazinium and 1,1-Dimethyl-1-(silatranylmethyl)hydrazinium Halides

Formerly unknown 1,1-dimethyl-1-(trialkoxysilylmethyl)- and 1,1-dimethyl-1-(silatranylmethyl)hydrazinium halides were prepared by reaction of 1,1-dimethylhydrazine with (halomethyl)trialkoxysilanes XCH₂Si(OR)₃ (X = Cl, I; R=Me, Et) and 1-(halomethyl)silatranes XCH₂Si(OCH₂CH₂)₃N (X = Cl, Br). 1,1-Dimethyl-1-(silatranylmethyl)hydrazinium chloride and iodide were also obtained by transetherification of corresponding 1,1-dimethyl-1-(trimethoxysilylmethyl)hydrazinium halides with tris(2-hydroxyethyl)amine.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 6, 2005, pp. 915–919.Original Russian Text Copyright © 2005 by Sorokin, Voronkov.     

Acetate and malonate complexes of cobalt(II), nickel(II) and zinc(II) with hydrazinium cation

The hydrazinium(1+) metal acetates and malonate dihydrates of the molecular formula [(N₂H₅)₂M(CH₃COO)₄] and (N₂H₅)₂[M(OOCCH₂COO)₂(H₂O)₂] respectively, whereM=Co, Ni or Zn, have been prepared and characterized by chemical analyses, conductance, magnetic, spectral, thermal and X-ray powder diffraction studies. The magnetic moments and electronic spectra indicate that these complexes are of high-spin octahedral variety. The infrared spectra show that the hydrazinium ions are coordinated in the case of acetate complexes, whereas in the malonate complexes the hydrazinium ions are out side the coordination sphere. These complexes undergo exothermic decomposition in the temperature range 150–450°C to give the respective metal oxide as the final residue. The X-ray powder diffraction patterns of the malonate complexes indicate isomorphism among them.     

IR-Spektren einiger wasserfreien fluoro-aluminate,-gallate und -indate

IR spectra of several hexa-, penta-and tetra-fluoro-metal-lates of aluminium, gallium and indium with several univalent cations together with hydrazinium(⁺1 and⁺2) were recorded from 4000 to 59 cm^?1. Site group and factor group vibrational analysis was performed for the compounds with known structures. Complete agreement between theory and experiment was found only in the case of tetragonal tetrafluorometallates. No splittings of the valence and deformation modes were observed with hexafluorometallates even in the caseof low symmetry. Splitting is characteristic for penta-and tetrafluoro compounds. In the case of hydrazinium fluorometallates octa-hedral coordination was additionaly proved on the basis of position of absorption bands. Weak hydrogen bonds were used for the explanation of the spectra of ammonium ion in the corresponding compounds.     

Preparation, characterisation and thermal properties of hydrazinium derivatives. Part III

Hydrazinium acetate, metavanadate, sulfite, sulphamate and thiocyanate have been prepared by the reaction of corresponding ammonium salts with hydrazine hydrate. The compounds were characterised by chemical analysis and infrared spectra. Thermal behaviour of these hydrazinium derivatives have been investigated using thermogravimetry and differential thermal analysis.     

The reactions of some pyranylideneiminium salts with amines. Part 1

The iminium salt, N,N-dimethyl-N-[2-(2,6-diphenyl-4H-pyran-4-ylidene)ethylidene]iminium perolilorate ( 1 ), reacts with secondary amines, such as piperidine, by exchanging the dimethyl-amino function for a piperidine. Primary amines react with 1 to give 1-alkyl-2-phenyl-4-phenacylidene-1,4-dihydropyridines. The bisiminium salt, N,N,N',N' -tetramethyI-N,N'-[2-(2,6-diphenyl-4H-pyran-4-ylidene)-1,3-propanediylidene]bis(iminium perchlorate) ( 2 ), reacts with ammonia to give 3,6-diphenylcopyrine and with primary amines to give the corresponding N,N' -dialkyl quaternary copyrines. The salt 2 reacts with secondary amines with exchange of the dimethylamino groups of 2 by the secondary arnine and addition of the amine at the 2-position of the pyran ring.     

Bridgehead nitrogen heterocycles. VI. The reaction of 1-amino- and 1,2-diaminopyridinium salts with β-dicarbonyl compounds

1,2-Diaminopyridinium iodide underwent reaction with ethyl acetoacetate to form 1,4-dihydro-2-methyl-4-oxopyrido[1,2-a]pyrimidin-1-ium iodide, and with acetyl acetone it gave 2,4-dimethylpyrido[1,2-a]pyrimidin-5-ium iodide. Though 2-acetylcyclohexanone gave the corresponding 5-methyl-1,2,3,4-tetrahydropyrido[1,2-a]quinazolin-11-ium iodide, no reaction was observed with 2,6-dimethyl-3,5-heptanedione, 1-benzoylacetone, 1,3-diphenyl-1,3-propanedione and its p-methoxyphenyl derivative. However, 1-aminopyridinium iodide and acetyl acetone in the presence of base gave 3-acetyl-2-methylpyrazolo[1,5-a]pyridine and 1-amino-2-methylpyridinium iodide yielded the corresponding 3-acetyl-2,7-dimethylpyrazolo[1,5-a]pyridine. With ethyl acetoacetate, the latter salt formed 3-ethoxycarbonyl-2,7-dimethylpyrazolo[1,5-a]pyridine but with 2,6-dimethyl substituents in the pyridine ring no condensation occurred. Reaction of 1-amino-2-methylpyridinium iodide with benzaldehyde gave N-benzalimino-2-methylpyridinium iodide which, on treatment with base, resulted in the formation of 2-picoline and benzonitrile, providing a convenient method of deamination.     

A Facile Synthesis of an Advanced Glycosylation Endproduct 2-(2′-furoyl)-4(5)-(2′-furanyl)-1H-imidazole

Abstract: A three step synthesis of the advanced glycosylation endproduct 2-(2′-furoyl)-4(5)-(2′-furanyl)-1H-imidazole (4, FFI) has been achieved from 2-acetylfuran. The key step in the synthesis was the rearrangement of the hydrazinium bromide 3 in refluxing methanol.     

Some reactions of ammonium or hydrazinium fluorides with xenon difluoride or xenon hexafluoride

The reactions between ammonium fluoride, hydrazinium(1+) fluoride, hydrazinium(2+) fluoride and XeF₂ or XeF₆ were studied. It was found that Xe, HF, N₂ were formed in these reactions. Interestingly enough, beside of these gases nitrogen fluorides in different quantities were formed also. The courses and the products of the above reactions are compared with analogous reactions with KrF₂.     

Polymers containing fluorinated ketone groups. IV. Syntheses and characterization of new fluorinated ketone-containing polymer-substituted polystyrenes

A series of new fluorinated ketone-containing polymers, poly(p-vinyltrifluoroacetophenone) (PVTFA), poly(p-vinyldifluoroacetophenone) (PVDFA), poly(p-vinylphenylheptafluoropropyl ketone) (PVHFK), and poly(o-and p-vinylbenzyltrifluoromethyl ketone) (PVTFK), were prepared by the free radical polymerization of the corresponding monomers. The monomers, p-vinyltrifluoroacetophenone (VTFA), p-vinyldifluoroacetophenone (VDFA), p-vinylphenylheptafluoropropyl ketone (VHFK), and o-and p-vinylbenzyltrifluoromethyl ketone (VTFK), were prepared by the reaction of Grignard reagent with the corresponding perfluoroacid or its lithium salt. Polymerization was a competitive side reaction during monomer preparation. Reduced side reaction and higher yields of monomer (based on the Grignard reagent) were obtained from the lithium salt of the perfluoroacid, compared with the perfluoroacid itself. These new substituted polystyrenes which contain fluorinated ketone functionality were characterized by their ability to (1) react with active hydrogen compounds such as alcohols or water; (2) have high glass transition temperatures and decreased solubility in nonpolar solvents (e. g., benzene) compared with polystyrene; and (3) be converted into other functional groups such as alcohols or acids by treatment with the appropriate chemical reagents. Beads of a styrene (ST) terpolymer with 2% divinylbenzene (DVB), which contained the CF₃COCH₂ function, were prepared by suspension polymerization of ST, VTFK, and DVB. The terpolymer, which contains 15-17% mole (or 0.70–0.71 meg/g) of CF₃COCH₂ swollen with a solvent, were shown to chemisorb alcohols.     

A new method for the synthesis of novel 6-quinoxalinylpyrazolo[5,1-c][1,2,4]triazines

The reaction of the quinoxaline 1 with 4-ethoxycarbonyl-1H-pyrazole-5-diazonium chloride 7 at room temperature gave 3-[α-(4-ethoxycarbonyl-1H-pyrazol-5-ylhydrazono)methoxycarbonylmethyl]-2-oxo-1,2-dihydroquinoxaline 8. The pmr spectrum of 8 in deuteriodimethylsulfoxide supported the presence of two tautomers 8-I and 8-II. Refluxing of 8 in N,N-dimethylformamide or acetic acid resulted in cyclization to afford 8-ethoxycarbonyl-4-oxo-3-(3-oxo-3,4-dihydroquinoxalin-2-yl)-1,4-dihydropyrazolo[5,1-c][1,2,4]triazine 9. Compound 9 was also obtained directly by the reaction of 1 with 7 under reflux in better yield. The reaction of 9 with hydrazine hydrate provided the hydrazinium salt 10 , while the reactions of 9 with triethyl and trimethyl orthoformates in the presence of 1,8-diazabicyclo[5,4,0]-7-undecene produced 8-ethoxycarbonyl-4-ethoxyl-3-(3-oxo-3,4-dihydroquinoxalin-2-yl)pyrazolo[5,1-c][1,2,4]triazine 11a and 8-ethoxycarbonyl-4-methoxyl-3-(3-oxo-3,4-dihydroquinoxalin-2-yl)pyrazolo[5,1-c][1,2,4]triazine 11b , respectively. The chlorination of 11a with phosphoryl chloride gave 3-(3-chloroquinoxalin-2-yl)-8-ethoxycarbonyl-4-ethoxylpyrazolo[5,1-c]-[1,2,4]triazine 12 , whose reaction with morpholine afforded 8-ethoxycarbonyl-4-ethoxyl-3-[3-(morpholin-4-yl)-quinoxalin-2-yl]pyrazolo[5,1-c][1,2,4]triazine 13.     

N4H9Cu7S4: a hydrazinium-based salt with a layered Cu7S4- framework

Crystals of a hydrazinium-based copper(I) sulfide salt, N4H9Cu7S4 (1), have been isolated by an ambient temperature solution-based process. In contrast to previously reported hydrazinium salts of main-group metal chalcogenides, which consist of isolated metal chalcogenide anions, and ACu7S4 (A = NH4+, Rb+, Tl+, K+), which contains a more three-dimensional Cu7S4- framework with partial Cu-site occupancy, the structure of 1 [P21, a = 6.8621(4) A, b = 7.9851(4) A, c = 10.0983(5) A, beta = 99.360(1) degrees , Z = 2] is composed of extended two-dimensional Cu7S4- slabs with full Cu-site occupancy. The Cu7S4- slabs are separated by a mixture of hydrazinium and hydrazine moieties. Thermal decomposition of 1 into copper(I) sulfide proceeds at a significantly lower temperature than that observed for analogous hydrazinium salts of previously considered metal chalcogenides, completing the transition at temperatures as low as 120 degrees C. Solutions of 1 may be used in the solution deposition of a range of Cu-containing chalcogenide films.     

On the reactions of alkylsulfonyl and perfluoroalkylsulfonyl fluorides with hydroxylamines and hydrazines

Sulfonic acid chlorides react with hydroxylamine to form predominantly N-substituted products [1].Sulfonic acid fluorides react with hydroxylamine by formation of N-mesylhydroxylamine, hydrazinium(1+) and hydroxylammonium mesylate [2]. R_fSO₂F (R_f = C₄F₉, C₈F₁₇) reacting in the same way as CH₃SO₂F [3], the latter is considered to be a model compound for this kind of reactions.

The formation of the hydrazinium salt is explained by the occurrence of O-mesylhydroxylamine as intermediate. We conclude from the yields that sulfonic acid fluorides react with hydroxylamine to form predominantly O-substituted products.In order to prepare this O-derivative the reaction between O-(trimethylsilyl)hydroxylamine and mesylfluoride was carried out. Hydrazinium mesylate could be isolated also, which indicates the formation of the instable O-derivative.The reactions of methylhydrazines and silylated hydrazines with mesylfluoride lead to mesylated products as expected.