Oral malodor,assessed by closed-loop,gas chromatography,and ion-trap technology

A method is described for the analysis of volatile organic compounds in saliva and tongue coating samples. The techniue is based on an off-line preconcentration step by means of a closed-loop trapping system followed by gas chromatography-ion trap detection. With the closed-loop technique, the volatile organic compounds(VOCs) are released from the matrix and trapped on an adsorbent without interference of water. The VOCs are released from the adsorbent into the gas chromatograph by thermdesorption. After separation, identification of the compounds is performed by ion trap technology. By this technique 82 compounds could be demonstrated in saliva and tongue coating samples. The technique is also used to demonstrate the formation of volatile bacterial fermentation compounds when a protein substrate is added to tongue coating samples. It is considered a very promising tool in further research on oral malodor.     

The automated sample preparation system MixMaster for investigation of volatile organic compounds with mid-infrared evanescent wave spectroscopy

For efficient development assessment, and calibration of new chemical analyzers a large number of independently prepared samples of target analytes is necessary. Whereas mixing units for gas analysis are readily available, there is a lack of instrumentation for accurate preparation of liquid samples containing volatile organic compounds (VOCs). Manual preparation of liquid samples containing VOCs at trace concentration levels is a particularly challenging and time consuming task. Furthermore, regularly scheduled calibration of sensors and analyzer systems demands for computer controlled automated sample preparation systems. In this paper we present a novel liquid mixing device enabling extensive measurement series with focus on volatile organic compounds, facilitating analysis of water polluted by traces of volatile hydrocarbons. After discussing the mixing system and control software, first results obtained by coupling with an FT-IR spectrometer are reported. Properties of the mixing system are assessed by mid-infrared attenuated total reflection (ATR) spectroscopy of methanol-acetone mixtures and by investigation of multicomponent samples containing volatile hydrocarbons such as 1,2,4-trichlorobenzene and tetrachloroethylene. Obtained ATR spectra are evaluated by principal component regression (PCR) algorithms. It is demonstrated that the presented sample mixing device provides reliable multicomponent mixtures with sufficient accuracy and reproducibility at trace concentration levels.     

Isolation and preconcentration of volatile organic compounds from water

Methods for the isolation and/or concentration of volatile organic compounds from water samples for trace organic analysis by gas chromatography are reviewed. The following basic groups of methods are discussed: liquid-liquid extraction, adsorption on solid sorbents, extraction with gas (gas stripping and static and dynamic headspace techniques) and membrane processes. The theoretical bases of these methods are discussed. Experimental arrangements for the isolation and/or concentration of volatile compounds from water are presented and discussed with respect to their efficiency. The applicability of the described methods to the isolation and/or concentration of various organic compounds from waters of various origins is discussed.     

Fast analysis of volatile organic compounds and disinfection by-products in drinking water using solid-phase microextraction-gas chromatography/time-of-flight mass spectrometry

A fast method was developed for the extraction and analysis of volatile organic compounds, including disinfection by-products (DBPs), with headspace solid-phase microextraction (HS-SPME) and gas chromatography/mass spectrometry (GC/MS) techniques. A GC/time-of-flight (TOF)-MS instrument, which had fast acquisition rates and powerful deconvolution software, was used. Under optimum conditions total runtime was 45s. Volatile organic compounds (VOCs), including purgeable A and B compounds (listed in US Environmental Protection Agency method 624), were identified in standard water samples. Extraction times were 1min for more volatile compounds and 2min for less volatile compounds. The method was applied to the analysis of water samples treated under different disinfection processes and the results were compared with those from a liquid-liquid extraction method.     

Analysis of organic compounds in environmental samples by headspace solid phase microextraction

The analysis of samples contaminated by organic compounds is an important aspect of environmental monitoring. Because of the complex nature of these samples, isolating target organic compounds from their matrices is a major challenge. A new isolation technique, solid phase microextraction, or SPME, has recently been developed in our laboratory. This technique combines the extraction and concentration processes into one step; a fused silica fiber coated with a polymer is used to extract analytes and transfer them into a GC injector for thermal desorption and analysis. It is simple, rapid, inexpensive, completely solvent-free, and easily automated. To minimize matrix interferences in environmental samples, SPME can be used to extract analytes from the headspace above the sample. The combination of headspace sampling with SPME separates volatile and semi-volatile analytes from non-volatile compounds, thus greatly reducing the interferences from non-target compounds. This paper reports the use of headspace SPME to isolate volatile organic compounds from various matrices such as water, sand, clay, and sludge. By use of the technique, benzene, toluene, ethyl-benzene, and xylene isomers (commonly known as BTEX), and volatile chlorinated compounds can be efficiently isolated from various matrices with good precision and low limits of detection. This study has found that the sensitivity of the method can be greatly improved by the addition of salt to water samples, water to soil samples, or by heating. Headspace SPME can also be used to sample semi-volatile compounds, such as PAHs, from complex matrices.     

On-line multi-bed sorption trap for VOC analysis of large-volume vapor samples: injection plug width, effects of water vapor and sample decomposition

A multibed on-line sorption trap is used to preconcentrate organic vapors from air samples and inject the analytes into a GC separation column. Injection plug widths depend on the boiling point for the lipophilic compounds and on the polarity and boiling point for the polar compounds. Injection plug widths are sufficiently small (0.7-0.8 s) as to allow the direct injection of the most volatile compounds into the GC column without the need for a second focusing device. The presence of water in the samples has an effect on the retention of polar compounds by the trap. However, this effect is reproducible for a fixed water content and so can be overcome by using calibration standards under the same conditions of humidity as the samples. The thermal decomposition of many volatile organic compounds in an on-line sorption trap during the GC analysis of air samples is examined. The results show that degradation of unstable compounds is governed by the amount of heat transferred to the compounds during desorption (i.e., applied temperature and pulse duration). The use of an on-line trap results in the immediate transfer of desorbed compounds to the analytical column, which can reduce the formation of artifacts.     

Direct aqueous injection with backflush thermal desorption for wastewater monitoring by online GC-MS

A gas chromatography—mass spectrometry system with a novel injector type, which is designed for direct aqueous injection of wastewater, is presented. The system is used for online monitoring of the influent of the wastewater treatment plant at BASF’s main chemical production site in Ludwigshafen, Germany. The purpose of monitoring is to protect the biological treatment process and the receiving water body, the Rhine. The modular system is primarily based on commercial equipment, but utilizes a special injection system, which is connected to a Deans switch. The two-stage injector consists of a programmable temperature vaporizer (PTV) injector with a small volume insert for vaporization and a dual sorbent packed second PTV for analyte adsorption/desorption. The Deans switch allows a backflush/thermal desorption operation which enables the direct injection of filtered, crude wastewater. About 170 volatile and semivolatile compounds are calibrated with approximate detection limits of 1 mg/L, which are sufficient for the analysis of untreated wastewater. The quantitative results are transferred to a database which is connected to a process control system. If the wastewater does not meet the required specification, an alarm is generated and the wastewater is diverted into a storage basin. Special software programs and routines allow for reliable, unattended operation and remote instrument control. Data quality is automatically controlled in each run and through the daily analysis of quality control samples. The current design allows for analysis of volatile compounds, such as methanol, whereas an earlier injector setup restricted the range of analytes to less volatile compounds (of size C₄ or greater).     

Selective removal of water in purge and cold-trap capmary gas chromatographic analysis of volatile organic traces in aqueous samples

The design and features of an on-line purge and cold-trap pre-concentration device for rapid analysis of volatile organic compounds in aqueous samples are discussed. Excessive water is removed from the purge gas by a condenser or a water permeable membrane in order to avoid blocking of the capillary cold-trap. Synthetic mixtures covering concentrations ranging from tenths to tens of ppb's and different chemical classes are used to study the effect of various process factors on the efficiency and selectivity of water removal as well as on the purging recovery. The importance of the concentration of the solutes, the flow rate in conjunction with the volume of the purge gas, and the temperature of the condenser, the cold-trap and the sample is emphasized. Theoretical models describing the purge process and the blocking of the cold-trap agree fairly well with the highly reproducible experimental results (σ = 2–4%). Both the condenser and the Nafion membrane successfully remove water, although some compounds, dependent on volatility and polarity, are partly or completely lost. It is shown that non-polar volatile organic compounds are efficiently enriched so that recoveries between 80–100% and a detection limit of 1 ppt can be obtained. The applicability of the system is illustrated on some examples.     

Membrane inlet mass spectrometry of volatile organohalogen compounds in drinking water.

The analysis of organic pollutants in drinking water is a topic of wide interest, reflecting on public health and life quality. Many different methodologies have been developed and are currently employed in this context, but they often require a time-consuming sample pre-treatment. This step affects the recovery of the highly volatile compounds. Trace analysis of volatile organic pollutants in water can be performed 'on-line' by membrane inlet mass spectrometry (MIMS). In MIMS, the sample is separated from the vacuum of the mass spectrometer by a thin polymeric hollow-fibre membrane. Gases and organic volatile compounds diffuse and concentrate from the sample into the hollow-fibre membrane, and from there into the mass spectrometer. The main advantages of the technique are that no pre-treatment of samples before analysis is needed and that it has fast response times and on-line monitoring capabilities. This paper reports the set-up of the analytical conditions for the analysis of volatile organohalogen compounds (chloroform, bromoform, bromodichloromethane, chlorodibromomethane, tetrachloroethylene, trichloroethylene, 1,1,1-trichloroethane, and carbon tetrachloride). Linearity of response, repeatability, detection limits, and spectra quality are evaluated.     

Coupling pervaporation to AAS for inorganic and organic mercury determination. A new approach to speciation of Hg in environmental samples

The design and development of a new approach for Hg speciation in environmental samples is described in detail. This method, consisting of the coupling of pervaporation and atomic absorption spectrometry, is based on a membrane phenomenon that combines the evaporation of volatile analytes and their diffusion through a polymeric membrane. It is proposed here as an alternative to gas chromatography for speciation of inorganic and organic Hg compounds, as the latter compounds are volatile and can be separated by applying the principles mentioned above. The interest of this method lies in its easy handling, low cost, and rapidity for the analysis of liquid and solid samples. This method has been applied to Hg speciation in a compost sample provided by a waste water treatment plant.     

Microanalysis of Volatile Organic Compounds (VOCs) in Water Samples – Methods and Instruments

Volatile organic compounds (VOCs), due to their toxicity and persistence in the environment, are particularly important pollutants. Some of these compounds are mutagens, teratogens or carcinogens, while others are responsible for the degradation of organoleptic parameters such as taste and odour of water. This review focuses on a number of key procedural steps in the analysis of volatile organic compounds (VOCs) in water samples. A wide spectrum of techniques for the isolation and preconcentration of the aforementioned pollutants for trace organic analysis by gas chromatography are presented and discussed. The advantages and disadvantages of these techniques are discussed and novel developments are also taken into consideration.     

Use of a temperature programmed injector with a packed liner for direct water analysis and on-line reversed phase LC–GC

A system is described that allows the introduction of large volumes of water samples in capillary GC. Water elimination is carried out in the solvent split mode in a PTV injector with a packed liner. Two ways of separating water and analytes, i.e. evaporative and non-evaporative (solid-phase extraction), are compared. Sampling in the solid-phase extraction mode is favorable both in terms of recovery as well as with regard to sampling time. Quantitative recovery is obtained for priority pollutants ranging in volatility from dimethyl-phenol to phenanthrene. Losses occur for more volatile compounds, but even for these compounds the repeatability of the recoveries remains acceptable. With the system described here, water samples up to at least 1 ml of water can be directly analyzed. The detection limits are in the sub-ppb range.     

Dual column capillary gas chromatographic system for the in situ analysis of volatile organic compounds on a cometary nucleus

Two Wall Coated Open Tubular capillary columns, coated with poly(cyanopropylphenyl-dimethyl)siloxane and poly(diphenyl-dimethyl)siloxane stationary phases, have been selected for use in the COmetary SAmpling and Composition space experiment for the separation and identification of the wide range of volatile organic compounds which could be present in cometary nuclei. This article presents the main characteristics of the tandem column system for the analysis of solutes of cometary interest within the constraints of space instrumental operating conditions. The high efficiency of the columns is demonstrated and the influence of the operating conditions on their separation properties are investigated. The studied columns exhibit complementary retention pattern: their use in a dual column system makes it possible to achieve the separation and the identification of the compounds of interest. Finally, the good analytical behavior of the columns when analyzing samples which include large amounts of water, the main presumed volatile in comets, is demonstrated. The presented results thus show the suitability of the selected tandem columns system for the desired analyses, and their performance on adaptation to in-situ cometary chemical investigation.     

顶空气相色谱-质谱联用技术的应用进展

顶空分析作为一种无有机溶剂萃取的样品处理技术,通常与气相色谱-质谱（GC-MS）技术结合用来分析复杂基质中的挥发性有机物。顶空气相色谱-质谱（HS-GC-MS）技术具有快速、高效、环保、灵敏度高等特点,在常规分析中发挥着重要作用。该文简要概述了静态顶空、动态顶空、顶空固相微萃取分析以及GC-MS联用技术,并介绍了整个顶空分析系统的影响因素和优化过程。根据基质类型的分类,综述了HS-GC-MS在食品和饮料、环境、生物等样品中的应用实例。HS-GC-MS的研究非常活跃,不断出现新应用,在分析挥发性有机物方面具有广阔前景。     

Performance and characteristics of a trace gas analyzer for the determination of volatile organic compounds in air

An instrument has been developed and tested for the continuous measurement of volatile organic compounds (VOC) in air. The system consists of a gas chromatograph equipped with a dedicated sampling device that allows the sample to be transferred to a cooled microtrap via sampling loops (10, 100, 250 ml) or via a direct pump transfer to the trap. The microtrap is placed in the chromatographic oven just below a modified split-splitless injector, allowing direct liquid injection for calibration of the system; the injector is in communication with the sampling valve equipped with the loop and the sampling pump. The system allows 24-hour sampling and analysis of a large number of VOC (up to 25 individual hydrocarbons ranging from C2 C9) and also polar volatile organic compounds PVOC. Thanks to the particular trap geometry, a minimum consumption of liquid nitrogen (between 150 300 ml) is needed for each analytical run and no water managing system is normally required for humid air samples.     

三种丁香花精油的挥发性成分比较分析

为了解紫丁香、白丁香和红丁香花蕾精油样品挥发性成分的差异,采用气相色谱-质谱联用技术（GC-MS）分析了三种丁香花精油样品的挥发性成分,并对三者的挥发性成分进行了主成分分析和聚类分析。结果从紫丁香、白丁香和红丁香精油中分别解析出46、64和56种挥发性物质,包括烷烃类、酯类、醇类、酮类、烯烃类、酚类、有机酸等,其中共有的挥发性成分为9种。三种丁香花精油样品的挥发性成分比较分析显示,酯类是含量最高的挥发性成分,其次是烷烃类,并且这两类物质在不同品种的丁香花精油中含量不同。统计分析结果表明三种样品的挥发性成分之间没有明显差别。本研究为增加丁香花精油的应用范围提供了理论依据。     

水蒸气蒸馏提取与顶空进样GC-MS分析高良姜挥发性成分

比较了水蒸气蒸馏法和顶空加热法提取高良姜挥发性成分的方法,并进行GC-MS分析。结果表明,两种提取方法无论在成分还是其相对含量均存在一定的差异。采用顶空进样技术可鉴定出31个挥发性化学成分,采用水蒸气蒸馏法可鉴定出31个挥发性化学成分,两种方法共有成分为16种。两种样品采集方法分别提供了高良姜不同沸点挥发物的化学信息,运用这两种方法可以建立更全面的高良姜挥发性成分GC-MS表征体系。     

Microwave induced plasma atomic emission spectrometry: a suitable detection system for the determination of volatile halocarbons

Microwave induced plasma atomic emission spectrometry (MIP-AES), a highly sensitive detection system for organometal compounds, was coupled to an automated purge and trap gas chromatographic system for the determination of volatile halogenated hydrocarbons in environmental water samples. Optimisation of the parameters affecting the injection and detection system led to relative detection limits from 1 to 14 ng · L^–1 for chlorine- and bromine-compounds and from 10 to 75 ng · L^–1 for iodine-compounds, on basis of a 10 mL sample volume. A comparison of the analytical characteristics between atomic emission detection (AED) and electron capture detection (ECD) showed a lower sensitivity of the atomic emission detector for halocarbons, but the detection thresholds are low enough to use the method for the determination of volatile halocarbons in trace level concentrations. The ability of the atomic emission detector provides increased selectivity for monitoring individual halogenated compounds under simplified and rapid chromatographic conditions, within a total analysis time of only 30 min. The method was applied with gas chromatographic separation for the analysis of sea water samples. Concentrations for the different elements between 0.05 and 15.28 μg · L^–1 were determined.     

Automated analysis of volatile halogenated hydrocarbons in rainwater and ambient air by purge and trap capillary gas chromatography

An automated system employing a purge and trap technique with capillary gas chromatography and electron-capture detection (ECD) has been developed for the analysis of trace levels of volatile halogenated hydrocarbons and applied to the determination of the compounds in environmental samples such as rainwater and ambient air. The operation of the method, its application to environmental samples, and the results obtained are described. Use of the system ensured good chromatographic resolution and high accuracy, even with trace levels of the compounds.     

A membrane introduction flame ionization/electron capture detection (MIFID/ECD) system for the rapid, real-time screening of volatile disinfection byproducts and hydrocarbon contaminants in water

Described is a system that employs an online membrane introduction (MI) interface coupled with parallel flame ionization and electron capture detectors (FID/ECD). We report the use of a MIFID/ECD system as an online method to detect total volatile organic halides (ΣVOXs) and volatile organic compounds (ΣVOCs) as aggregate parameters in environmental water samples at sub parts-per-billion levels without the need for sample handling or analyte pre-concentration. The instrument provides rapid screening and real-time monitoring capabilities of important classes of water contaminants in a simple system without the vacuum requirements of MS detectors. Furthermore, the MIFID/ECD instrument was successfully employed as a real-time reaction monitor for the photodegradation of toluene by an advanced oxidation process and the formation of volatile disinfection byproducts in the chlorination of natural waters. The results of these experiments compare favorably to those obtained using membrane introduction mass spectrometry (MIMS).