On-line multidimensional open tubular column supercritical fluid chromatography using a valve-switching interface

Summary An on-line two-dimensional open tubular column supercritical fluid chromatograph was constructed and evaluated. A rotary valve interface allowed independent flow control of two 50-m i.d. open tubular columns, providing maximum versatility for heartcutting. A solvent-venting injection technique was incorporated in the system that enabled single or multiple 2.0-L volumes to be injected into an uncoated, yet deactivated, length of capillary precolumn without flooding of the analytical column. A cold trap was employed to refocussolutes from single or multiple fractional cuts after being transferred to the second dimension. The performance of the system was demonstrated with the analysis of mixtures of polycyclic aromatic compounds and steroids. Efficiencies of 4,500 plates m^–1 were preserved in the second column after heartcutting.     

On-line multidimensional supercritical fluid chromatography/capillary gas chromatography

A new analytical technique combining on-line supercritical fluid chromatography with capillary gas chromatography has been developed. The supercritical fluid sample effluent is decompressed through a restrictor directly into a conventional capillary gas chromatographic injection port. This technique allows for not only direct (100%) sample transfer from the supercritical fluid chromatograph to the gas chromatograph but also for selective or multi-step heartcutting of various sample peaks as they elute from the supercritical fluid chromatograph. Heartcut times are determined by monitoring the responses from the flame ionization or ultraviolet absorbance detectors on the supercritical fluid chromatograph. This report describes the operational setup and provides the results of heartcut reproducibility experiments using normal hydrocarbon and aromatic test mixtures. Results from studies where operational parameters were varied, such as GC injector temperature, will also be provided. The potential usefulness of this new technique for selective heartcutting will also be demonstrated using complex hydrocarbon streams.     

Retention in capillary supercritical fluid chromatography

Supercritical fluid chromatography (SFC) sometimes exhibits GC-like behavior and sometimes LC-like behavior, depending on conditions. However, it is not always clear whether one of these types of behavior, or a combination, operates for a particular set of conditions for every solute in a mixture. For example, some components may be partitioned mostly by their vapor pressures, while others, in the same mixture, are partitioned predominantly by solvent-like properties of the mobile phase. Plots of retetion (as log of the capacity factor) vs. reciprocal temperature at constant pressure reveal a clear change in the character of the separation of well-behaved solutes. A thermodynamic explanation of the observed behavior is given, based on the assumption that partitioning is controlled by the heats of solution of solute in the mobile and stationary phases. A model of SFC retention as it deviates from pure-GC behavior on the same column is presented.     

The effects of modifiers in supercritical fluid chromatography

Investigations have been initiated to examine the basic elements of resolution and how they vary individually and collectively in terms of modifiers used in supercritical fluid chromatography (SFC). Capacity factors (k′) have been determined for a mixture of polynuclear aromatic hydrocarbons from SFC experiments as function of modifier identity and concentration using different stationary phases. Using carbon dioxide as the primary mobile phase, the modifiers investigated included methanol, 2-methoxy ethanol, 1-propanol, tetrahydrofuran, dimethyl sulfoxide, acetonitrile, sulfur hexafluoride, and freon 11.     

Direct coupling of capillary supercritical fluid chromatography with supercritical fluid extraction using modified carbon dioxide

Capillary supercritical fluid chromatography has been directly coupled with supercritical fluid extraction using modified carbon dioxide. The mixed fluids were prepared with a single pump on-line mixing system. The most important step in the SFE-SFC interface was the elimination of the modifier solvent. This was achieved by use of a coupled trap, 0.1 mm i.d. and 0.53 mm i.d. capillary tubing connected in series, with the collected solutes refocused on the second (0.53 mm i.d.) trap before transfer into the separation column. This enabled complete elimination of various modifier solvents and high efficiency collection of the solutes. The effect of the modifier on trapping efficiency was investigated using methanol, ethanol, dichloromethane, hexane, and toluene at a variety of concentrations. n-Eicosane was, for example, trapped quantitatively by modified carbon dioxide containing up to 13 % (w/w) methanol. The use of the technique has been demonstrated by selective extraction of n-paraffins, fatty acid methyl esters, and alcohols from a silica matrix; the effect of different modifiers on the extraction of a mixture of pesticides from soil has also been investigated.     

Analysis of propellant stabilizer components via packed and capillary supercritical fluid chromatography/Fourier transform infrared spectrometry

The separation of model mixtures of nitrated diphenylamine and nitrated aniline via supercritical fluid chromatography employing both capillary and packed columns is described. With highly deactivated stationary phases each mixture could be separated with 100% CO₂ pressure programmed. Peak identification and peak purity were afforded by on-line Fourier transform infrared spectrometric detection. Nitrosoaniline derivatives were observed via FTIR to have been converted to nitro derivatives on storage.     

Polyacrylate liquid crystalline stationary phases in supercritical fluid chromatography with carbon dioxide mobile phase

Summary New polyacrylate liquid crystalline compounds were coated onto glass or fused-silica capillary columns as stationary phases and applied to supercritical fluid chromatography. These stationary phases, were very stable: no bleeding was observed at 200°C and up to 200kg/cm² pressures of carbon dioxide mobile phase. The wide working range of the capillary column was extended below the g-n transition temperature. Isomeric compounds such as - and -methoxynaphthalene, anthracene and phenanthrene and several phenolic compounds were separated.     

The dependence of reduced plate height on reduced velocity in carbon dioxide supercritical fluid chromatography with packed columns

Summary The relation is proposed for the dependence of reduced plate height, h, on reduced velocity in carbon dioxide, supercritical fluid chromatography with packed columns. The classical Knox model does not take into account the density drop in the column which produces a peak-broadening. A supplementary coefficient with a parabolic dependence on velocity must be added and then a good fit between experimental results and theory is observed. Finally, the influence of other parameters such as pressure, capacity factor and solute molecular area is discussed.     

Planarity selectivity in supercritical fluid and liquid chromatography using octadecylsilane-modified silicas with carbon dioxide

Summary The influence of column temperature and pressure on the planarity selectivity of encapsulated and polymeric octadecylsilane-modified silicas was examined using carbon dioxide mobile phase in supercritical fluid and liquid chromatography. The use of liquid carbon dioxide was found to enhance remarkably the molecular planarity recognition capability of the polymeric stationary phase compared with supercritical conditions. The influence of pressure and temperature on selectivity was seen to be significant with the polymeric phase but less with the encapsulated. It seems that pressure and temperature change the morphology of the polymeric phase to a greater extent than the encapsulated one.     

Synthesis of siloxane stationary phases for capillary gas chromatography and supercritical fluid chromatography

A comparison is made between dichlorosilanes and cyclic siloxanes as starting materials in the synthesis of stationary phases for capillary gas chromatography (CGC) and supercritical fluid chromatography (SFC). Siloxanes containing one or more of the side groups methyl, vinyl, phenyl, and cyanoethyl in various ratios were synthesized and compared. These phases were characterized by chromatographic (gel permeation, GPC), spectroscopic (IR, ¹H NMR, ²⁹Si NMR), and thermal (DSC) methods. Coated fused silica columns were evaluated with respect to polarity, crosslinkability with several free-radical initiators, and thermal stability. A new liquid phase, 7% cyanoethyl, 7% phenyl, 1% vinyl methyl polysiloxane is shown to be more polar than OV-1701, more temperature stable, easily crosslinked and suitable for use in supercritical fluid chromatography.     

Sulfur hexafluoride as a mobile phase for supercritical fluid chromatography

Summary The capabilities of sulfur hexafluoride as a mobile phase for supercritical-fluid chromatography are investigated. An evaluation of its overall utility on the basis of separations of standard aromatic hydrocarbon odel mixtures performed on a variety of bonded-phase, packed columns with UV detection is presented. The dependence of separation performance upon operational parameters is also examined. A comparative evaluation of the chroamtographic properties of supercitrical sulfur hexafluoride and those of supercritical carbon dioxide is developed from these separations under corresponding supercritical state conditions.     

Metal selective flame ionization detection after supercritical fluid chromatography

This work describes the construction and operation of a flame ionization detector for the selective detection of metal-containing compounds after capillary supercritical fluid chromatography. Using optimal conditions for achieving metal sensitive flame ionization responses which have been established for the detector after capillary gas chromatography, initial evaluation of the detector after SFC proved promising. Like the carbon sensitive FID, it appears that the metal sensitive FID is compatible with SFC when pure carbon dioxide is used as the mobile phase. Response characteristics were found to be similar to those observed when the detector is used in gas chromatography.     

Recent advances in supercritical fluid chromatography/mass spectrometry

A summary of the recent advances in SFC/MS is included in this review. Interface designs are described as well as the key control variables. Finally, future developments in SFC/MS are predicted.     

Capillary supercritical fluid chromatography with ultraviolet multichannel detection of some pesticides and herbicides

The useful combination of capillary supercritical fluid chromatography with ultraviolet multichannel detection is demonstrated by the analysis of selected pesticides and herbicides. In this application the advantages of compound identification by ultraviolet spectrometry are appended to the separating capability of capillary supercritical fluid chromatography. A pseudo oncolumn detection approach is used. Compromises from the theoretically ideal conditions for both capillary SFC and the multichannel UV detector are made to achieve a practical interfacing of the chromatographic and spectrophotometric techniques. Detection limits are at the low nanogram levels.     

Liquid crystal stationary phases for gas chromatography and supercritical fluid chromatography

Novel monomeric and polymeric liquid crystalline compounds were synthesized as stationary phases for gas chromatography (GC) and supercritical fluid chromatography (SFC). Monomeric liquid crystalline compounds were used in packed column gas chromatography for the separation of isomeric aromatic compounds and insect sex pheromones. Liquid crystalline polymers possess long nematic ranges and a uniform coating was easily achieved in glass and fused silica capillaries, which could stand temperatures up to 250°C in GC and pressures of 200 MPa at 160°C in SFC. The columns provide excellent selectivity and resolution for fused ring aromatic compounds such as the isomers anthracene and phenanthrene or triphenylene and chrysene.