The enzymatic degradation of commercial biodegradable polymers by some lipases and chemical degradation of them

Biodegradable polyesters, poly(butylene succinate adipate) (PBSA), poly(butylene succinate) (PBS), poly(ethylene succinate) (PES), poly(butylene succinate)/poly(caprolactone) blend (HB02B) and poly(butylene adipate terephthalate) (PBAT), were evaluated about degradability for enzymatic degradation by lipases and chemical degradation in sodium hydroxide solution. In enzymatic degradation, PBSA was the most degradable by lipase PS, on the other hand, PBAT containing aromatic ring was little degraded by eleven kinds of lipases. In 1N NaOH solution, degradation rate of PES with ethylene unit was extremely fast, in comparison with other polyesters. Interestingly the degradation rate of PBSA in enzymatic degradation by lipase PS was faster than in chemical degradation.     

Sequential analysis of polyesters by stepwise chemical degradation: Application to oligo and poly(alkylene terephthalate)s

A specifically tailored reagent was used to label the hydroxyl end groups of poly(ethylene/butylene terephthalate), which is synthesized by transesterification of the corresponding homopolymers. The terminal monomeric unit was then eliminated, together with the attached label, as a low molecular-weight cyclic compound. Specially synthesized reference compounds containing ethylene terephthalate and butylene terephthalate units enabled the terminal monomeric unit to be identified as butylene terephthalate, although the copolymer showed an otherwise random distribution. Despite the practical and theoretical reasons that restrict this sequential degradation to the last monomeric unit for polymers, the principle can be used in a wider range of applications if combined with selective degradation and separation by means of HPLC, which results in chemically uniform oligomers. The ultimate and penultimate monomeric units of ethylene/butylene terephthalate type oligomers can be identified using the cyclodegradation procedure described here. © 1993 John Wiley & Sons, Inc.     

Thermal and pyrolysis studies of copolyesters

Random copolyesters of dimethyl terephthalate (DMT), ethylene glycol (EG), and butane-1,4-diol (BD) and the homopolyesters poly(ethylene terephthalate) (PET) and poly(butylene terephthalate) (PBT) have been subjected to degradation and pyrolysis studies. Differential thermal analysis (DTA) showed that the decomposition temperature is dependent on the percentage of EG and BD present in the copolyesters. Thermal volatilization analysis (TVA) also showed that the decomposition temperature is dependent on the percentage of EG and BD present in the copolyesters. The trend for the decomposition temperatures obtained from TVA studies for these copolyesters is similar to such other thermal properties as melting temperature T_m, ΔH_f, ΔH_c, etc. The subambient thermal volatilization analysis (SATVA) curves obtained for these polymers are also presented. The SATVA curve is the fingerprint of the total volatile products formed during the degradation in high vacuum. The isothermal pyrolysis of these materials was carried out in high vacuum at 450°C. The products formed were separated in a gas chromatograph and were subsequently identified in a mass spectrometer. The major pyrolysis products from PBT were butadiene and tetrahydrofuran, whereas those from PET were ethylene and acetaldehyde. The ratio of acetaldehyde to ethylene increases with the EG content in the copolyester, suggesting a different decomposition mechanism compared to the decomposition mechanism of PBT and PET.     

Thermal degradation of polyesters by simultaneous TG-DTA/FT-IR analysis

A combination system of thermogravimetric/differential thermal analysis (TG-DTA) and Fourier-transform infrared absorption spectroscopy (FT-IR) was described. This simultaneous TG-DTA/FT-IR technique gave spectroscopic and weight loss information about the thermal degradation process of engineering polyesters; poly(ethylene terephthalate)(PET) and poly(butylene terephthalate)(PBT). The evolved gases from PET were benzoic acid, carbon dioxide and carbon monoxide, while those from PBT were terephthalic acid esters and benzoic acid esters.

---

Zusammenfassung Es wird ein kombiniertes System aus TG-DTA und FT-IR beschrieben. Mit dieser simultanen TG-DTA/FT-IR-Technik wurden spektroskopische und Massenverlustangaben über die thermische Zersetzung technisch wichtiger Polyester, namentlich von Poly(ethylenterephthalat) (PET) und Poly(Butylenterephthalat) (PBT) ermittelt. Die aus PET freigesetzten Gase waren Benzoesäure, Kohlendioxid und Kohlenmonoxid, die aus PBT freigesetzten Gase hingegen Terephthalsäureester und Benzoesäureester.

     

Poly(ethylene terephthalate) copolymers containing nitroterephthalic units. III. Methanolytic degradation

The methanolytic degradation of poly(ethylene terephthalate) (PET) copolymers containing nitroterephthalic units was investigated. Random poly(ethylene terephthalate‐co‐nitroterephthalate) copolyesters (PETNT) containing 15 and 30 mol % nitrated units were prepared from ethylene glycol and a mixture of dimethyl terephthalate and dimethyl nitroterephthalate. A detailed study of the influence of the nitro group on the methanolytic degradation rate of the nitrated bis(2‐hydroxyethyl) nitroterephthalate (BHENT) model compound in comparison with the nonnitrated bis(2‐hydroxyethyl) terephthalate (BHET) model compound was carried out. The kinetics of the methanolysis of BHENT and BHET were evaluated with high‐performance liquid chromatography and ¹H NMR spectroscopy. BHENT appeared to be much more reactive than BHET. The methanolytic degradation of PET and PETNT copolyesters at 80 °C was followed by changes in the weight and viscosity, gel permeation chromatography, differential scanning calorimetry, scanning electron microscopy, and ¹H and ¹³C NMR spectroscopy. The copolyesters degraded faster than PET, and the degradation increased with the content of nitrated units and occurred preferentially by cleavage of the ester groups placed at the meta position of the nitro group in the nitrated units. For both PET and PETNT copolyesters, an increase in crystallinity accompanied methanolysis. A surface degradation mechanism entailing solubilization of the fragmented polymer and consequent loss of mass was found to operate in the methanolysis of the copolyesters. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2276–2285, 2002     

Branching and cross-linking of poly(ethylene terephthalate) and its foaming properties

The branching and cross-linking of poly(ethylene terephthalate) were investigated using two chain extenders: glycidyl methacrylate-styrene copolymer (GS) and poly(butylene terephthalate)-GS (PBT-GS) in order to improve the melt viscosity and melt strength of poly(ethylene terephthalate). An obvious increase in torque evolution associated with chain extending, branching and cross-linking was observed during the process. The properties of modified poly(ethylene terephthalate) were characterized by intrinsic viscosity and insoluble content measurements, rheological and thermal analysis. The intrinsic viscosity and rheological properties of modified PET were improved significantly when using PBT-GS, indicating that PBT-GS should be a better chain extender. Good foaming of poly(ethylene terephthalate) materials were obtained using supercritical CO₂ as blowing agent. The average cell diameter and cell density were 61 μm and 1.8 × 10⁸ cells/cm³, respectively.     

Miscibility in a ternary system of poly(ether imide) with semicrystalline poly(ethylene terephthalate) and poly(butylene terephthalate)

A rare case of thermodynamic miscibility has been demonstrated in the amorphous state (quenched glass as well as molten state) of a ternary blend system formed by poly(ether imide) and semicrystalline poly(ethylene terephthalate) and poly-(butylene terephthalate). A single glass transition temperature (T_g) in the ternary blends was observed using differential scanning calorimetry and dynamic mechanical analysis.     

Tight binding of poly(carboxylate) ligand to calcium carbonate with intramolecular NH…O hydrogen bond

Novel poly(carboxylates), partially amidated poly(acry late), poly{[1-carboxylate-2-(N-t-butyl)carbamoyl)]ethylene-alt-ethylene}, poly[1-(N-oxysuccinyl-aminomethenyl)ethylene], poly[1-(N-oxymalenyl-aminomethnyl)ethylene] and poly[1-(N-oxyphthalyl-aminomethnyl)ethylene] with intramolecular NH…O hydrogen bond between amide NH and coordinating oxygen were synthesized as model ligands for CaCO₃ biominerallization. The FE/SEM and its backscatter of the CaCO₃ composite of gold colloid-conjugated poly{[1-carboxylate-2-(N-p-methylthiophenyl)carbamoyl]ethylene-alt-ethylene} indicate that the polymer ligand is located at the surface of vaterite crystals and the oriented carboxylate ligands control the CaCO₃ polymorph.     

The effect of filler surface modification and processing conditions on distribution behaviour of silica nanofillers in polyesters

Dispersion and distribution of nanosized precipitated amorphous silica particles in poly(ethylene terephthalate) PET and poly(butylene terephthalate) PBT matrices have been studied. The effect of silane coupling agent as well as processing conditions has been analysed on the basis of microscopic analysis of sample morphology. N-2-(aminoethyl)-3-aminopropyltrimethoxysilane (A-1120) has been used as a silica surface modifier. The effect of the extrusion process performance with a single and a twin screw extruder has been tested. It has been found that the processing conditions are more important factors determining fine dispersion and homogenous distributions of filler particles in the matrix than the filler surface modification. The results obtained have revealed that single screw extrusion is preferred only for processing the composites comprising the silica modified with aminosilane, while the application of twin screw extrusion leads to homogenous dispersion and fully deagglomeration of filler particles without silane treatment. It has been established that when the concentration of silica filler increased from 3 up to 7% by weight, the secondary process of particle aggregation occurs.     

Synthesis of poly(ester amide)s by the melt polycondensation of semiaromatic polyesters with ethanolamine and their characterization

Semiaromatic poly(ester amide)s (PEAs) were synthesized by the melt polycondensation of ethanolamine (EA) derivatives with dimethyl terephthalate and ethylene glycol in the presence of tetrabutyl titanate as a catalyst, and their crystallization and thermal properties were investigated. The introduction of an amide group into a semiaromatic polyester such as poly(ethylene terephthalate) (PET) produced PEAs (EA-modified PET polymers) with an increase in the melting point. However, these PEAs were found to decompose at a lower temperature than PET on the basis of TGA. Moreover, direct pyrolysis/mass spectrometry measurements suggested that an initial step of the thermal decomposition was a β-CH hydrogen-transfer reaction via asix-member ring transition state at the ester–ethylene–amide unit, at which carbon–oxygen bond scission took place to yield carboxyl and N-vinylamide end groups. Furthermore, molecular orbital calculations using trimer models bis[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl]terephthalate, N-[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl]-4-[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyloxycarbonyl]benzamide, and N,N′-bis[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl]terephthalamide strongly supported the idea that the β-CH hydrogen-transfer reaction in the thermal decomposition of PEAs might occur more easily at the methylene group next to the amide group in an ester–ethylene–amide unit rather than at the methylene group next to the ester group in an ester–ethylene–ester unit. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2184–2193, 2007     

Polyesters analogous to PET and PBT based on O‐benzyl ethers of xylitol and L‐arabinitol

The synthesis, characterization, and some properties of new copolyesters of poly(butylene terephthalate) (PBT) and poly(ethylene terephthalate) (PET) based on L ‐arabinitol and xylitol are described. These copolyesters were obtained by polycondensation reaction in the melt of mixtures of 1,4‐butanediol or ethylene glycol and 2,3,4‐tri‐O‐benzyl‐L ‐arabinitol or 2,3,4‐tri‐O‐benzyl‐xylitol with dimethyl terephthalate. Their weight‐average molecular weights ranged between 7000 and 55,000, with polydispersities ranging from 1.4 to 4.7. Copolymers containing 1,4‐butanediol could be analyzed by NMR, and were found to have a statistical microstructure. All these copolyesters were thermally stable, with degradation temperatures well above 300 °C. With increasing amounts of alditol in the copolyester, the melting temperature and crystallinity decreased in both series, and the glass transition temperature increased for the PBT series and decreased for the PET series. Only PBT‐derived copolyesters containing a maximum of 10% alditol units showed discrete scattering characteristic of crystalline material. No substantial differences in either structure or properties were observed between the L ‐arabinitol and xylitol copolyester series. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5167–5179, 2008     

Morphology of poly(butylene terephthalate)–poly(ethylene terephthalate‐co‐isophthalate‐co‐sebacate) segmented copolyesters

Segmented copolyesters, namely, poly(butylene terephthalate)–poly(ethylene terephthalate‐co‐isophthalate‐co‐sebacate) (PBT‐PETIS), were synthesized with the melting transesterification processing in vacuo condition involving bulk polyester produced on a large scale (PBT) and ternary amorphous random copolyester (PETIS). Investigations on the morphology of segmented copolyesters were undertaken. The two‐phase morphology model was confirmed by transmission electron microscopy and dynamic mechanical thermal analysis. One of the phases was composed of crystallizable PBT, and the other was a homogeneous mixture of PETIS and noncrystallizable PBT. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2257–2263, 2003     

Preparation, characterization and hydrolytic degradation of poly[p-dioxanone-(butylene succinate)] multiblockcopolymer

A series of poly[p-dioxanone-(butylene succinate)] (PPDOBS) copolymers were prepared from p-dioxanone (PDO), 1,4-butanediol and succinate acids through a two-step process including the initial prepolymer preparation of poly(p-dioxanone)diol (PPDO-OH) and poly(butylene succinate)diol (PBS-OH) and the following copolymerization of the two kinds of prepolymers by coupling with hexamethylene diisocyanate (HDI). The molecular structures of the prepared PPDO-OH, PBS-OH and PPDOBS were characterized by hydrogen nuclear magnetic resonance spectroscopy (¹H NMR). The crystallization of the copolymers was investigated by using differential scanning calorimetry (DSC), polarized optical microscopy (POM) and wide angle X-ray diffraction (WAXD). It has been shown that the crystallization rate and the degree of crystallization increases with the increase of the weight fraction of poly(butylene succinate) (PBS) blocks in the copolymers. In phosphate buffer solution with pH 7.4 at 37 °C for 18 weeks, the hydrolytic degradation behaviors of the copolymers were studied. The changes of retention weight, water absorption, pH value, and surface morphologies with the degradation time showed that the hydrolytic degradation rate of PPDOBS could be controlled by adjusting the weight fraction of poly(p-dioxanone) (PPDO) and PBS blocks in the copolymers. The changes of the thermal properties of PPDOBS during the degradation were also investigated by DSC.     

Oxygen permeability of biodegradable copolycaprolactones

Polycaprolactone is one of the biodegradable polymers with good drug permeability. In the present paper, polycaprolactone and three kinds of copolycaprolactone–polycaprolactone–poly(ethylene oxide)– polycaprolactone triblock copolymer (PCE), polycaprolactone/polycaprolactone‐poly(ethylene oxide)/polylactide tricomponents random block copolymer (PCEL) and polycaprolactone/poly(ethylene terephthalate) random block copolymer (PETCL)– were synthesized. The biodegradation behavior of these polymers were shown by degradation tests in vitro, ex vivo and in vivo. The oxygen permeabilities of these polymers were in the range of 10⁻¹⁰ ∼ 10⁻⁹ cm³ (STP) cm/cm² sec cm Hg. Copolymers PCE and PCEL displayed O₂ and N₂ permeability coefficients (PO₂/PN₂) ratios of about 9. The effects of composition and crystallinity of the copolymers on biodegradability and the oxygen permeability of the polymer were discussed. Copyright © 1999 John Wiley & Sons, Ltd.     

Chain extension of polyesters PET and PBT with N,N′-bis (glycidyl ester) pyromellitimides. I

Three N,N′-bis (glycidyl ester imide) of pyromellitic acid (diepoxides) were prepared and were used as chain extenders for poly (ethylene terephthalate) (PET) and poly (butylene terephthalate) (PBT). The typical reaction conditions for the coupling of the polyester macromolecules were heating with the chain extender under argon atmosphere above the melting temperature (280°C for PET and 250°C for PBT) for several minutes. The Characterization of the samples, obtained at variable residence times in the reactor, was based on solution viscosity measurements and carboxyl and hydroxyl end-group determinations. Two of the diepoxides used gave satisfactory results. Starting from a PET having intrinsic viscosity [η] = 0.60 dL/g, and carboxyl content CC = 42 eq/10⁶ g, one could obtain PET with [η] = 1.15 dL/g and CC = 16 eq/10⁶ g within 30 min at 280°C. Analogous results were observed for PBT. The hydroxyl content of polyester in all cases was increased. When the quantity of the chain extender used was higher than that theoretically required for its reaction with all carboxyl end groups of the polyester, this resulted in some gel formation indicative of crosslinking. © 1995 John Wiley & Sons, Inc.     

Thermal degradation and their kinetics of biodegradable poly(butylene succinate-co-butylene terephthate)s under nitrogen and air atmospheres

In this study, thermal degradation and their related kinetics have been investigated mainly by means of thermal gravimetrical analyzer (TGA) under the dynamic nitrogen and air atmospheres for the chemically prepared biodegradable aliphatic-aromatic copolyesters of poly(butylene succinate-co-butylene terephthalate) (PBST). To further shed new lights on the comonomer molar composition and experimental condition dependences of thermal degradation kinetics, the as-known Friedman model was at first applied to quantitatively evaluate the kinetic parameters in terms of activation energy (E), degradation reaction order (n) and the frequency factor (Z). The results clearly demonstrated that thermal stabilities of these PBST copolyesters were substantially enhanced with the incorporation of more rigid butylene terephthalate comonomer, and tended to be much better in nitrogen than in air. Furthermore, the Friedman, Freeman-Carroll and Chang models were concurrently employed to quantitatively evaluate the thermal degradation kinetic parameters of the PBST copolyesters in nitrogen at different heating rates of 1, 2 and 5 K/min. It was found that the thermal degradation kinetic parameters for the PBST copolyesters were strongly dependent on the heating rate and calculating models. In addition, life-time parameters of the biodegradable PBST copolyesters were first calculated to predict the maximum usable temperatures, and this would be useful for practical application of these new bio-based green plastics.     

Preparation and characterization of aliphatic/aromatic copolyesters based on 1,4-cyclohexanedicarboxylic acid

A series of biodegradable aliphatic/aromatic copolyesters, poly(butylene terephthalate)-co-poly(butylene cyclohexanedicarboxylate)-b-poly(ethylene glycol) (PTCG), were prepared by a two-step melt polycondensation method and characterized by means of GPC, FTIR, NMR, DSC, TGA, etc. The effects of aliphatic ester content on the physical, mechanical and thermal properties, as well as in vitro and in vivo degradation behaviors were investigated. The decrease in mechanical strength was observed with an increase in poly(butylene cyclohexanedicarboxylate) (PBC) molar fraction. DSC results showed one melting point and two glass transition temperatures in all samples, and the melting temperature was found to go down gradually as more cyclohexanedicarboxylic acid (CHDA) was added. During the in vitro and in vivo degradation processes, erosion of the surface was dominant as evidenced by scanning electron microscopic observations. The copolyesters containing many CHDA units were featured by the higher water uptake and faster degradation due to much richer amorphous phase within them.     

Configurational properties of aromatic polyesters: Dipole moments of poly(diethylene terephthalate) chains

Dielectric constants have been determined for a fraction of poly(diethylene terephthalate) in benzene at several temperatures. The data indicate that the dipole moment ratio 〈μ²〉/Nm² is somewhat higher than that of poly(ethylene oxide), and its temperature coefficient is in the vicinity of zero. Both the dipole ratio and its temperature coefficient are in very good agreement with those predicted by the rotational isomeric state theory. Using this theory, the unperturbed dimensions of poly(diethylene terephthalate) were calculated and it was found that (〈r²〉/M)_∞ = 0.80 Ų (g mol wt)^?1, a value intermediate between those of poly(ethylene oxide) (0.57) and poly(ethylene terephthalate) (1.05).     

Liquid chromatographic-mass spectrometric studies on the in vitro degradation of a poly(ether ester) block copolymer

A detailed study on the in vitro degradation of a poly(ethylene glycol) and poly(butylene terephthalate) (PEOT/PBT) segmented block copolymer was carried out using liquid chromatography/electrospray-mass spectrometry. Accelerated hydrolysis of PEOT/PBT was achieved by placing the material for 14 days in a refluxing phosphate buffered saline (pH 7.4) solution. All major degradation products and several side-products were identified using both the positive and the negative ion mode. The data indicate that degradation does not only occur in the "soft", but also in the "hard" segments of the polymer. Liquid chromatographic separation is required to distinguish between degradation products with different sequences but identical molecular mass. The addition of ammonium and sodium ions provided important complementary information on the number of monomer units present in the degradation products.     

A new model for the kinetic analysis of thermal degradation of polymers driven by random scission

In this paper, a series of f(α) kinetic equations able to describe the random scission degradation of polymers is formulated in such a way that the reaction rate of the thermal degradation of polymers that go through a random scission mechanism can be directly related to the reacted fraction. The proposed equations are validated by a study of the thermal degradation of poly(butylene terephthalate) (PBT). The combined kinetic analysis of thermal degradation curves of this polymer obtained under different thermal pathways have shown that the proposed equation fits all these curves while other conventional models used in literature do not.