Synthesis of polyamides from active N,N′-diacylbis-2-benzothiazolones and diamines under mild conditions

The aminolysis of N-benzoyl-2-benzothiazolone was studied in model systems and was found to give excellent yields of N-substituted benzamides at room temperature. Solution polycondensation of new bisamides, N,N′-adipoylbis-2-benzothiazolone and N,N′-isophthaloylbis-2-benzothiazolone, proceeded fairly slowly with both aromatic and aliphatic diamines at room temperature to yield polyamides having inherent viscosities up to 1.5. Hexamethylphosphoramide was the best polycondensation medium among some polar aprotic solvents for the formation of high molecular weight polyamides. The high reactivity of the N-acyl-2-benzothiazolones was discussed in relation to excellent leaving nature and intramolecular general base catalysis of the benzothiazolone moiety.     

Poly(4,4′-dipiperidyl)amides

Polyamides from 4,4′-dipiperidyl, 1,2-ethylene-, and 1,3-propylene- bridged dipiperidyls were prepared via solution and interfacial polycondensation techniques. In sharp contrast to the polyamides from N,N′-alkyl-substituted alkylene diamines and aromatic diacids, the polyamides from 4,4′-dipiperidyls are high-melting (up to 455°C) and alcohol-insoluble. Tough films were cast from formic acid solutions of the polymers; fiber of good physical properties was prepared from a formic acid solution of the polyterephthalamide of 1,2-di(4-piperidyl)ethane.     

N,N′-Linked 1,2-benzisothiazol-3(2H)-one 1,1-dioxides: synthesis, biological activity, and derived radicals

A number of N,N′-linked benzoannelated isothiazol-3(2H)-one 1,1-dioxides, not available via oxidation of isothiazolium salts, were obtained with good yields by reaction of N-amino heterocycles with 2-chlorosulfonylbenzoyl chloride and evaluated for their inhibitory activity toward human leukocyte elastase (HLE) and acetylcholinesterase (AChE). 2-(Phthalimid-1-yl)-1,2-benzisothiazol-3(2H)-one 1,1-dioxide and 2-(2-methyl-4-oxo-3(4H)-quinazolinyl)-1,2-benzisothiazol-3(2H)-one 1,1-dioxide were found to be inhibitors of HLE and tested as potential precursors of nitrogen-centered radicals using 266 nm laser flash photolysis.     

Polyamides from perchloro-4,4′-dichloroformylbiphenyl

New thermally stable polyamides were prepared by low-temperature polycondensation in N,N-dimethylacetamide from perchloro-4,4′-dichloroformylbiphenyl and various aromatic and aliphatic diamines. The polymers were characterized by infrared spectroscopy, elemental analysis, TGA, and DSC and found to show higher thermal stability than other nonchlorinated polyamides.     

Synthesis and characterization of novel soluble triphenylamine‐containing aromatic polyamides based on N,N′‐bis(4‐aminophenyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine, N, N′‐bis(4‐aminophenyl)‐N, N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 4‐fluoronitrobenzene, followed by catalytic reduction. A series of novel aromatic polyamides with triphenylamine units were prepared from the diamine and various aromatic dicarboxylic acids or their diacid chlorides via the direct phosphorylation polycondensation or low‐temperature solution polycondensation. All the polyamides were amorphous and readily soluble in many organic solvents such as N, N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with good mechanical properties. They had useful levels of thermal stability associated with relatively high glass‐transition temperatures (257–287 °C), 10% weight‐loss temperatures in excess of 550 °C, and char yields at 800 °C in nitrogen higher than 72%. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2810–2818, 2002     

Synthesis of spiro[2H-indole-2,1′-1H-isoindole]-3,3′-diones,spiro[1H-isobenzofuran-1,2′-2H-indole]-3,3′-diones and spiro[benzofuran-2,1′-isobenzofuran]-3,3′-diones via transannular reactions of eight membered ring intermediates

An auto oxidation-rearrangement product 4 was isolated from a high dilution reaction of ninhydrin with 3,4,5-trimethoxyaniline in water. A general synthesis of this compound and its derivatives 4–6 was devised by oxidation of tetrahydroindeno[1,2-b]indol-10-ones 1–3 with sodium periodate to give isoindolo[2,1-a]-indole-6,11-diones 4–6 in good yield. Compounds 4–6 can be easily transformed into spiro[1H-isobenzofuran-1,2′-2H-indole]-3,3′-diones 8–10 , spiro[2H-indole-2,1′-1H-isoindole]-3,3′-diones 11–13 and isoindole[1,2-a:2′,1′-b]pyrimidine-5,15-diones 15, 16 in high yields. Analogous reactions were performed on 3-amino-5a, 10a-dihydroxybenzo[b]indeno[2,1-d]furan-10-one ( 17 ) to give a dibenzoxocintrione 18 , spiro-[benzofuran-2,1′-isobenzofuran]-3,3′-dione 19 and an isoindol-1-one 20 .     

Synthesis and properties of new soluble aromatic polyamides and polyimides on the basis of N,N′‐bis(3‐aminobenzoyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new N‐phenylated amide (N‐phenylamide) unit containing aromatic diamine, N,N′‐bis(3‐aminobenzoyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 3‐nitrobenzoyl chloride, followed by catalytic reduction. Two series of organosoluble aromatic poly(N‐phenylamide‐imide)s and poly(N‐phenylamide‐amide)s with inherent viscosities of 0.58–0.82 and 0.56–1.21 dL/g were prepared by a conventional two‐stage method and the direct phosphorylation polycondensation, respectively, from the diamine with various aromatic dianhydrides and aromatic dicarboxylic acids. All polyimides and polyamides are amorphous and readily soluble in many organic solvents such as N,N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with high tensile strengths. These polyimides and polyamides had glass‐transition temperatures in the ranges of 230–258 and 196–229 °C, respectively. Decomposition temperatures of the polyimides for 10% weight loss all occurred above 500 °C in both nitrogen and air atmospheres. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2564–2574, 2002     

Synthesis of polyamides from active O,O′-diacyl derivatives of N-hydroxy compounds and diamines under mild conditions

Two new routes to polyamides were established, based on the polycondensation of two new typical active diesters: the active diester of N-hydroxy-5-norbornene-2,3-dicarboximide, such as N,N′-(terephthaloyldioxy)bis(5-norbornene-2,3-dicarboximide), and the active diester of 3-hydroxy-4-oxo-3,4-dihydro-1,2,3-benzotriazine, such as 3,3′-(isophthaloyldioxy)bis(4-oxo-3,4-dihydro-1,2,3-benzotriazine) with diamines. The polycondensation occurred at room temperature in solution without added catalyst. Dipolar aprotic solvents which included dimethyl sulfoxide and N-methyl-2-pyrrolidone were used as solvents for polymerization. Before polymer synthesis the aminolysis of two active monoesters was carried out as a model compound study.     

Regiocontrolled syntheses of some new spiro[polycyclic-1′-isothiochroman]-4′-one derivatives

Indan-1-one (1a), 1-tetralone (1b), fluorenone (1c), and anthrone (1d) reacted with mercaptoacetic acid in toluene in the presence of p-toluenesulfonic acid to give spiro[indan-1,2′-[1′,3′]oxathialan]-5′-one (2a), spiro[tetrahydro-naphthalene-1,2′-[1,3′]oxathialan]-5′-one (2b), spiro[fluorene9,2′-[1′,3′]-oxathialan]-5′-one (2c), and spiro[anthracene-9(10H)-2′-[1′,3′]-oxathialan]-5′-one (2d), respectively. Compounds 2a–d reacted with arenes in the presence of aluminum chloride to yield spiro[polycyclic-1′-isothiochroman]-4′-one derivatives 3a–t. The mechanisms of these reactions are discussed. All the synthesized spiroheterocycle derivatives were identified by conventional methods (IR, ¹H-NMR spectroscopy) and elemental analyses. © 1996 John Wiley & Sons, Inc.     

Nitrogen bridgehead compounds. Part 86. Synthesis and reactivity of 7,12-dihydropyrimido[1′,2′;1,2]pyrido[3,4-b]indol-4(6H)-ones. Debenzologues of rutaecarpine alkaloids

A series of 7,12-dihydropyrimido[1′2′:1,2]pyrido[3,4-b]mdole-4(6H)-ones was prepared by Fischer indolization of 9-arylhydrazono-6,7,8,9-tetrahydro-4H-pyrido[1,2-a]pyrirmdin-4-ones. Quantum chemical calculations (ab initio and AM1) indicate that position 3 of 7,12-dihydropyrimido[1′,2′:1,2]pyrido-[3,4-b]indole-4(6H)-one can be involved in electrophilic substitutions, while position 2 is sensitive towards nucleophilic attack. Bromination of 6-methyl-7,12-tetrahydropyrimido[1′,2′:1,2]pyrido-[3,4-b]indol-4(6H)-one 16 with bromine afforded 3-bromo derivative 25 , which was reacted with cyclic amines to give 2-ammo-7,12-dihydropyrirmdo[1′2′:1,2]pyrido[3,4-b]indol-4(6H)-ones 26–30 in an addition-elimination reaction. Vielsmeier-Haack formylation of compound 16 gave 12-formyl 31 and 3,12-diformyl 32 derivatives (an N-formyl-1-deaza derivative of nauclefidine alkaloid 34 ) at 60° and 100°, respectively. 3,12-Diformyl compound 32 was oxidized to 3-carboxyl derivative 33 with potassium permanganate. The quaternary salt 35 , obtained from compound 16 with dimethyl sulfate, suffered a ring opening on the action of aqueous sodium hydroxide. The new compounds have been characterized by elemental analyses uv, ¹H nmr and in some cases by ¹³C ruler, CD spectra and X-ray investigations.     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-aminophenoxy) biphenyl or 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl and aromatic dicarboxylic acids

New aromatic diamines having kink and crank structures, 2,2′-bis(p-aminophenoxy)biphenyl and 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluoronitrobenzene with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by catalytic reduction. Biphenyl-2,2′-diyl- and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.44–1.18 and 0.26–0.88 dL/g, respectively, were obtained either by the direct polycondensation or low-temperature solution polycondensation of the diamines with aromatic dicarboxylic acids (or diacid chlorides). These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 215–255 and 266–303°C, respectively. They began to lose weight at ca. 380°C, with 10% weight loss being recorded at about 470°C in air. © 1993 John Wiley & Sons, Inc.     

Synthesis of 2-(2′,3′-dihydroxypropyl)-5-amino-2H-1,2,4-thiadiazol-3-one and 3-(2′,3′-dihydroxypropyl)-5-amino-3H-1,3,4-thiadiazol-2-one

The synthesis of two new acyclic nucleoside analogs, 2-(2′,3′-dihydroxypropyl)-5-amino-2H-1,2,4-thiadiazol-3-one (1) and 3-(2′,3′-dihydroxypropyl)-5-amino-3H-1,3,4-thiadiazol-2-one (2), is reported. The first compound, 1, was obtained by reaction of 3-chloro-1,2-propanediol with the sodium salt of 5-amino-2H-1,2,4-thiadiazol-3-one (3) in anhydrous dimethylformamide. Similarly, 5-amino-3H-1,3,4-thiadiazol-2-one (4) reacted with 3-chloro-1,2-propanediol to give 2. The thiadiazole 4 was prepared by condensation-cyclization of hydrazothiodicarbonamide (9).     

β-Ribo- and α-arabinonucleosides containing the 1,2-benzisoxazole and 1,2-benzisothiazole rings

The reaction of the silylated base of 1,2-benzisoxazol-3(2H)-one ( 1 ) and its 7-methyl derivative 5 and 5-methyl-1,2-benzisothiazol-3(2H)-one ( 9 ), respectively, with 1-O-acetyl-2,3,5-tri-O-benzoyl-β-D-ribofuranose followed by basic deprotection gave the corresponding β-D-ribonucleosides, and the silylated base of 1 , when treated with 1-O-acetyl-2,3,5-tri-O-benzoyl-α-D-arabinofuranose in the presence of stannic chloride, afforded the corresponding α-arabinonucleoside. Structural proofs of these nucleosides are provided from elemental analyses and ¹H and ¹³C nmr spectra.     

Synthesis and characterization of N‐benzoylated wholly aromatic polyamides from 4,4′‐oxydianilinobis(benzimidoyl) chloride and aromatic dicarboxylic acids

A novel type of polyamides, N‐benzoylated wholly aromatic polyamides, were synthesized by low‐temperature solution polycondensation of a new aromatic bis(imidoyl) chloride, 4,4′‐oxydianilinobis(benzimidoyl) chloride, with aromatic dicarboxylic acids, 4,4′‐oxydibenzoic acid and isophthalic acid. Compared with the conventional all aromatic polyamides and also N‐phenylated wholly aromatic polyamides, these N‐benzoylated aramides exhibit better solubility in organic solvents, lower glass transition temperatures and thermal stability.     

6,6′‐Di­methoxy‐2,2′‐[(1R,2R)‐cyclo­hexane‐1,2‐diyl­bis­(nitrilo­methyl­idyne)]­diphenol: three C—H⃛O hydrogen bonds generate a three‐dimensional framework

Molecules of the title compound, alternatively called (R,R)‐N,N′‐bis(3‐methoxysalicylidene)‐trans‐cyclohexane‐1,2‐diamine, C₂₂H₂₆N₂O₄, contain two intramolecular O—H⃛N hydrogen bonds and adopt a conformation with approximate twofold rotational symmetry. The mol­ecules are linked by three C—H⃛O hydrogen bonds [H⃛O = 2.45–2.55 Å, C⃛O = 3.329 (2)–3.398 (2) Å and C—H⃛O = 142–172°] into a continuous framework.     

Polycyclic nitrogen compounds. Part II. Tricyclic quinoxalinones and their 4- or 6-aza analogues

1,2,3,3a-Tetrahydro-9-nitropyrrolo[1,2-α]quinoxalin-4-one and 7,8,9,10-tetrahydro-3-nitropyrido[1,2-α]quin-oxalin-6-one (V-VI) were reduced and deaminated to give new parent tricyclic quinoxalinone skeletons I-II. The latter compounds were identical with the tricycles obtained by an unambiguous independent synthesis. New 6-aza-1,2,3,3a-tetrahydropyrrolo[1,2-α]quinoxalin-4-one (III) and 4-aza-7,8,9,10-tetrahydropyrido[1,2-α]-quinoxalin-6-one (IV) were prepared by selective hydrogen transfer reductive cyclisation of esters of N-(2-nitro-3-pyridyl)pyrrolidine-2-carboxylic acid and N-(2-nitro-3-pyridyl)piperidine-2-carboxylic acid (Xb and XIb) respectively.     

Investigations in the field of benzoxa- zines. 15*. Tandem heterocyclizations with the participion of 2-formylbenzoic acid. The synthesis of isoindolo[1,2-<Emphasis Type="Italic">b</Emphasis>][1, 3]- and -[2,1-<Emphasis Type="Italic">a</Emphasis>][1, 3]benzoxazinones

Single stage reactions of 2-formylbenzoic acids with substituted 2-(1-aminoalkyl)phenols and 2-amino-phenylcarbinols give a novel series of isomeric isoindolobenzoxazinones. X-ray analysis was used to study the molecular structure of 9-bromo-5,5-diphenyl-5H-isoindolo[2,1-a][1, 3]benzoxazin-11(6aH)-one and 2-bromo-8,10-dimethyl-10H-isoindolo[1,2-b][1, 3]-benzoxazin-12(4bH)-one.     

Room-temperature polycondensation of β-amino acid derivatives VI. Synthesis of various N-(hydroxyethyl) nylons

Various N-(hydroxyethyl)amino acid esters having a methyl substituent or phenyl group between amine and ester groups have been synthesized and their polycondensation behavior was investigated. These substituted amino acid esters gave amorphous polyamides which were soluble in alcohol. A model reaction between N-(hydroxyethyl)-amine and carboxylic acid ester was carried out in order to elucidate the role of hydroxyethyl group on the polycondensation. It was found that the amidation reaction took place rapidly at room temperature when the alkyl group of the carboxylic acid was small. N-(Hydroxyethyl) polyamides were obtained from N,N′-(bishydroxyethyl)-dicamines and dicarboxylic acid esters. The reaction mechanism of the room-temperature polycondensation reaction is discussed.     

1,2-Fused pyrimidines. III. Derivatives of 12H-pyrido[1′,2′:1,2]pyrimido[4,5-b]quinoline,a novel heterocyclic system

Reactivities of 2-amino-4H-pyrido[1,2-a]pyrimidin-4-ones and 4-amino-2H-pyrido[1,2-a]pyrimidin-2-ones, both N,N-dialkyl and (N-alkyl, N-phenyl)substituted, when treated with the N,N-dimethylformamide/phosphorus oxychloride Vilsmeier-Haack reagent XII were compared. Starting from 2-[(N-alkyl, N-phenyl)amino] compounds IXa,b , the expected XVIa,b and XVIIa,b were obtained, which are derivatives of 12H-pyrido[1′,2′:1,2]pyrimido[4,5-b]quinoline, a novel heterocyclic system. When 2-(phenylamino) compound IXc was used a mixture of 3-formylderivative XVIII and 12H-pyrido-[1′,2′:1,2]pyrimido[4,5-b]quinolin-12-one ( XIX ) resulted from the reaction. On the other hand, 2-(dialkylamino)-4H-pyrido[1,2-a]pyrimidin-4-ones IIIa-c plainly afforded high yields of 3-formylderivatives XIVa-c. In contrast, no significant reaction occurred when 4-(dialkylamino) and 4-[(N-alkyl,N-phenyl)amino] compounds IIa-c and VIIIa,b were treated with the reagent XII , under the same as well as more severe conditions. A clear difference in the nucleophilic reactivity of C-3 position between these two classes of isomers is pointed out by the above summarized results.     

Synthesis and properties of aromatic polyamides based on 4,4′-(2,7-naphthalenedioxy)dibenzoic acid

4,4′-(2,7-Naphthalenedioxy)dibenzoic acid, a new aromatic dicarboxylic acid monomer, was prepared starting from 2,7-dihydroxynaphthalene and p-fluorobenzonitrile in three steps. Using triphenyl phosphite (TPP) and pyridine as condensing agents, a series of novel aromatic polyamides were synthesized by the direct polycondensation of the diacid monomer and aromatic diamines in N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride. The resulting polyamides had inherent viscosities ranging from 0.48 to 0.67 dL/g. Most of these polyamides were readily soluble in polar solvents, such as NMP and N,N-dimethylacetamide (DMAc). Transparent, flexible, and tough films were cast from their DMAc solutions. They had tensile strengths of 65–70 MPa, elongations to break of 5–7%, and initial moduli of 1.4–1.6 GPa. Most of these polymers proved to be amorphous, with glass transition temperatures in the range between 143–227°C. Thermogravimetric analysis (TG) showed that all the polyamides were stable up to 450°C in both air and nitrogen atmospheres. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1469–1478, 1997