Integration of Layered Redox Proteins and Conductive Supports for Bioelectronic Applications

Integration of redox enzymes with an electrode support and formation of an electrical contact between the biocatalysts and the electrode is the fundamental subject of bioelectronics and optobioelectronics. This review addresses the recent advances and the scientific progress in electrically contacted, layered enzyme electrodes, and discusses the future applications of the systems in various bioelectronic devices, for example, amperometric biosensors, sensoric arrays, logic gates, and optical memories. This review presents the methods for the immobilization of redox enzymes on electrodes and discusses the covalent linkage of proteins, the use of supramolecular affinity complexes, and the reconstitution of apo-redox enzymes for the nanoengineering of electrodes with protein monolayers of electrodes with protein monolayers and multilayers. Electrical contact in the layered enzyme electrode is achieved by the application of diffusional electron mediators, such as ferrocene derivatives, ferricyanide, quinones, and bipyridinium salts. Covalent tethering of electron relay units to layered enzyme electrodes, the cross-linking of affinity complexes formed between redox proteins and electrodes functionalized with relay-cofactor units, or surface reconstitution of apo-enzymes on relay-cofactor-functionalized electrodes yield bioelectrocatalytic electrodes. The application of the functionalized electrodes as biosensor devices is addressed and further application of electrically "wired" enzymes as catalytic interfaces in biofuel cells is discussed. The organization of sensor arrays, self-calibrated biosensors, or gated bioelectronic devices requires the microstructuring of biomaterials on solid supports in the form of ordered micro-patterns. For example, light-sensitive layers composed of azides, benzophenone, or diazine derivatives associated with solid supports can be irradiated through masks to enable the patterned covalent linkage of biomaterials to surfaces. Alternatively, patterning of biomaterials can be accomplished by noncovalent interactions (such as in affinity complexes between avidin and a photolabeled biotin, or between an antibody and a photoisomerizable antigen layer) to provide a means of organizing protein microstructures on surfaces. The organization of patterned hydrophilic/hydrophobic domains on surfaces, by using photolithography, stamping, or micromachining methods, allows the selective patterning of surfaces by hydrophobic, noncovalent interactions. Photoactivated layered enzyme electrodes act as light-switchable optobioelectronic systems for the amperometric transduction of recorded photonic information. These systems can act as optical memories, biomolecular amplifiers, or logic gates. The photoswitchable enzyme electrodes are generated by the tethering of photoisomerizable groups to the protein, the reconstitution of apo-enzymes with semisynthetic photoisomerizable cofactor units, or the coupling of photoisomerizable electron relay units.     

Immobilization of peroxidase glycoprotein on gold electrodes modified with mixed epoxy-boronic Acid monolayers

The development of bioelectronic enzyme applications requires the immobilization of active proteins onto solid or colloidal substrates such as gold. Coverage of the gold surface with alkanethiol self-assembled monolayers (SAMs) reduces nonspecific adsorption of proteins and also allows the incorporation onto the surface of ligands with affinity for complementary binding sites on native proteins. We present in this work a strategy for the covalent immobilization of glycosylated proteins previously adsorbed through weak, reversible interactions, on tailored SAMs. Boronic acids, which form cyclic esters with saccharides, are incorporated into SAMs to weakly adsorb the glycoprotein onto the electrode surface through their carbohydrate moiety. To prevent protein release from the electrode surface, we combine the affinity motif of boronates with the reactivity of epoxy groups to covalently link the protein to heterofunctional boronate-epoxy SAMs. The principle underlying our strategy is the increased immobilization rate achieved by the weak interaction-induced proximity effect between slow reacting oxyrane groups in the SAM and nucleophilic residues from adsorbed proteins, which allows the formation of very stable covalent bonds. This approach is exemplified by the use of phenylboronates-oxyrane mixed monolayers as a reactive support and redox-enzyme horseradish peroxidase as glycoprotein for the preparation of peroxidase electrodes. Quartz crystal microbalance, atomic force microscopy, and electrochemical measurements are used to characterize these enzymatic electrodes. These epoxy-boronate functional monolayers are versatile, stable interfaces, ready to incorporate glycoproteins by incubation under mild conditions.     

Dense monolayers of metal-chelating ligands covalently attached to carbon electrodes electrochemically and their useful application in affinity binding of histidine-tagged proteins

In this work, monolayers of metal complexes were covalently attached to the surface of carbon electrodes with the goal of binding monolayers of histidine-tagged proteins with a controlled molecular orientation and a maintained biological activity. In this novel method, which is simple, versatile, and efficient, the covalent attachment was accomplished in a single step by the electrochemical reduction of aryl diazonium ions that were substituted with a nitrilotriacetic (NTA) or an imminodiacetic (IDA) ligand at the para position. The transient aryl radicals that were generated in the reduction were grafted to the surfaces of glassy carbon, highly oriented pyrolitic graphite, and graphite-based screen-printed electrodes, producing dense monolayers of the ligands. The NTA- and IDA-modified electrodes were shown to efficiently chelate Cu(II) and Ni(II) ions. The presence of the metal was established using X-ray photoelectron spectroscopy and electrochemistry. Surface coverages of the ligands were indirectly determined from the electroactivity of the copper(II) complex formed on the electrode surface. Studies on the effect of electrodeposition time and potential showed that, at sufficiently negative potentials, the surface coverage reached a saturating value in less than 2 min of electrodeposition time, which corresponds to the formation of a close-packed monolayer of ligand on the electrode surface. Once loaded with a metal ion, the modified electrode was able to bind specifically to histidine-tagged proteins such as the horseradish peroxidase (His-HRP) or to an enhanced, recombinant green-fluorescent protein via its N-terminal hexahistidine tail. In the case of His-HRP, the amount of active enzyme specifically immobilized by metal-chelating binding was determined from the analysis of electrocatalytic currents using cyclic voltammetry. The electrochemical grafting makes it possible to accurately controlled and electronically address the amount of deposited ligand on the conductive surfaces of carbon electrodes with any size and shape.     

Electrochemical approach to the development of a photoelectrode on the basis of photosynthetic reaction centers

Experimental approaches to the coupling of photoinduced charge separation in reaction centers (RCs) of the photosynthetic bacterium Rhodobacter sphaeroides R-26 with electron transfer to an electrode are discussed. Exogenous quinones are used as an electron transfer mediator. With the use of photopolarography it is shown that water-soluble ubiquinone can serve as a diffusionally mobile mediator of electron transfer. Some methods of quinone immobilization at an electrode have been developed to obtain a non-diffusional mediator of electron transfer. Quasi-reversible electrochemical kinetics were observed for aminonaphthoquinone immobilized as a monolayer at a Pt electrode. The ubiquinone-depleted RCs were subjected to affinity immobilization at these chemically modified electrodes probably due to the insertion of the immobilized quinone into the primary quinone Q_A binding site. The quantum efficiency of photocurrent formation was ca. 5% for the photoelectrode obtained. The electrochemical process of the immobilized quinone is shown to be the stage that limits electron transfer from RCs to the electrode.     

Determination of active diaphorase immobilized at electrode surfaces

The activity of diaphorase (from Bacillus stearothermophilus) immobilized on glassy carbon (GC) electrodes was determined by analyzing the catalytic currents for oxidation of the immobilized enzyme using digital simulation techniques, which gives the concentration of the active enzyme at the electrode surface. Results show that the immobilization by the cross-linking reaction with glutaraldehyde deactivates the enzyme and only about 10% of the total enzyme remains active at the electrode surface.     

Oriented immobilization of a membrane-bound hydrogenase onto an electrode for direct electron transfer

The interaction of redox enzymes with electrodes is of great interest for studying the catalytic mechanisms of redox enzymes and for bioelectronic applications. Efficient electron transport between the biocatalysts and the electrodes has achieved more success with soluble enzymes than with membrane enzymes because of the higher structural complexity and instability of the latter proteins. In this work, we report a strategy for immobilizing a membrane-bound enzyme onto gold electrodes with a controlled orientation in its fully active conformation. The immobilized redox enzyme is the Ni-Fe-Se hydrogenase from Desulfovibrio vulgaris Hildenborough, which catalyzes H(2)-oxidation reversibly and is associated with the cytoplasmic membrane by a lipidic tail. Gold surfaces modified with this enzyme and phospholipids have been studied by atomic force microscopy (AFM) and electrochemical methods. The combined study indicates that by a two-step immobilization procedure the hydrogenase can be inserted via its lipidic tail onto a phospholipidic bilayer formed over the gold surface, allowing only mediated electron transfer between the enzyme and electrode. However, a one-step immobilization procedure favors the formation of a hydrogenase monolayer over the gold surface with its lipidic tail inserted into a phospholipid bilayer formed on top of the hydrogenase molecules. This latter method has allowed for the first time efficient electron transfer between a membrane-bound enzyme in its native conformation and an electrode.     

Aluminum Sol-Gel Immobilized Amperometric Biosensor for H2O2

The determination of hydrogen peroxide is of practical importance in chemical, biological, clinical and many other fields. Enzyme electrodes have been studied widely for the past two decades and many research papers have been devoted to them. A very important factor in enzyme electrode development is the enzyme immobilization. Since Braun et al reported the first attempts to encapsulate proteins inside silica glasses in 1990, the low temperature sol-gel process has become an attractive avenue for the immobilization of biomolecules in connection with the development of new biosensors. A sufficient amount of trapped interstitial water contained in gels played an important role in the retention of the tertiary structure and reactivity of the immobilized enzymes.     

Direct electrochemical sensing of glucose using glucose oxidase immobilized on functionalized carbon nanotubes via a novel metal chelate-based affinity method

We report on a novel amperometric glassy carbon biosensing electrode for glucose. It is based on the immobilization of a highly sensitive glucose oxidase (GOx) by affinity interaction on carbon nanotubes (CNTs) functionalized with iminodiacetic acid and metal chelates. The new technique for immobilization is exploiting the affinity of Co(II) ions to the histidine and cysteine moieties on the surface of GOx. The direct electrochemistry of immobilized GOx revealed that the functionalized CNTs greatly improve the direct electron transfer between GOx and the surface of the electrode to give a pair of well-defined and almost reversible redox peaks and undergoes fast heterogeneous electron transfer with a rate constant (k _s) of 0.59?s^?1. The GOx immobilized in this way fully retained its activity for the oxidation of glucose. The resulting biosensor is capable of detecting glucose at levels as low as 0.01?mM, and has excellent operational stability (with no decrease in the activity of enzyme over a 10?days period). The method of immobilizing GOx is easy and also provides a model technique for potential use with other redox enzymes and proteins.

Immobilization of liposomes onto quartz crystal microbalance to detect interaction between liposomes and proteins

To study the interaction between liposomes and proteins, intact liposomes were immobilized on a metal planar support by chemical binding and/or bioaffinity using a quartz crystal microbalance (QCM). A large decrease in the resonance frequency of quartz crystal was observed when the QCM, modified by a self-assembled monolayer (SAM) of carboxythiol, was added to liposome solutions. The stable chemical immobilization of intact liposomes onto SAM was judged according to the degree with which adsorbed mass depended on the prepared size of liposomes, as well as on the activation time of SAMs when amino-coupling was introduced, where the liposome coverage of electrodes was 69+/-8% in optimal conditions. When avidin-biotin binding was used on amino-coupling liposome layers, liposome immobilization finally reached 168% coverage of the electrode surface. Denatured protein was also successfully detected according to the change in the frequency of the liposome-immobilized QCM. The adsorbed mass of denatured carbonic anhydrase from bovine onto immobilized liposomes showed a characteristic peak at a concentration of guanidine hydrochloride that corresponded to a molten globule-like state of the protein, although the mass adsorbed onto deactivated SAM increased monotonously.     

Peptide Modified Electrodes as Electrochemical Metal Ion Sensors

Sensors for the detection of metal ions are of considerable importance for enabling the monitoring of environmental samples for metal ion contamination directly in the field. This review outlines the use of peptides and amino acids as the recognition element of electrochemical sensors for metal ion detection. Initially the complexation of metals by peptides is discussed followed by the immobilization of peptides on electrode surfaces. Subsequently, the application of peptide modified electrodes for detecting metals is reviewed and finally challenges and future prospects are outlined.     

生物功能电极I: GOD修饰电极的电化学活性

以二环己基碳化二亚胺为活化剂将葡萄糖氧化酶(GOD)共价键接在玻碳电极上, 伏安实验观察到酶与电极基体的直接电子传递, 有观电子传递速度常数约为1s^-^1, 过程归因于全酶中辅基FAD的氧化还原转变。Ag^+离子的存在强烈地阻碍酶辅基的还原, 这与该离子抑制酶活性的机理可能有联系。Ag^+的抑制作用可由EDTA处理或电化学处理而解除, GOD电极对氧和苯醌的电还原有催化作用。测定了苯醌同还原态GOD的化学反应速度常数, 并讨论用苯醌代替氧作为生物电催化中的电子传递体的优点。     

Immobilization of Horseradish Peroxidase on Nonwoven Polyester Fabric Coated with Chitosan

The immobilization of horseradish peroxidase (HRP) on composite membrane has been investigated. This membrane was prepared by coating nonwoven polyester fabric with chitosan glutamate in the presence of glutraldehyde as a crosslinking agent. The physico-chemical properties of soluble and immobilized HRP were evaluated. The soluble HRP lost 90% of its activity after 4 weeks of storage at 4°C, whereas the immobilized enzyme retained 85% of its original activity at the same time. A reusability study of immobilized HRP showed that the enzyme retained 54% of its activity after 10 cycles of reuse. Soluble and immobilized HRP showed the same pH optima at pH 5.5. The immobilized enzyme had significant stability at different pH values, where it had maximum stability at pH 3.0 and 6.0. The kinetic properties indicated that the immobilized enzyme had more affinity toward substrates than soluble enzyme. The soluble and immobilized enzymes had temperature optima at 30 and 40°C and were stable up to 40 and 50°C, respectively. The stability of HRP against metal ion inactivation was improved after immobilization. Immobilized HRP exhibited high resistance to proteolysis by trypsin. The immobilized HRP was more resistant to inactivation induced by urea, Triton X-100, and organic solvents compared to its soluble counterpart. The immobilized HRP showed very high yield of immobilization and markedly high stabilization against several forms of denaturants that offer potential for several applications.     

Activity of AC electrokinetically immobilized horseradish peroxidase

Dielectrophoresis (DEP) is an AC electrokinetic effect mainly used to manipulate cells. Smaller particles, like virions, antibodies, enzymes, and even dye molecules can be immobilized by DEP as well. In principle, it was shown that enzymes are active after immobilization by DEP, but no quantification of the retained activity was reported so far. In this study, the activity of the enzyme horseradish peroxidase (HRP) is quantified after immobilization by DEP. For this, HRP is immobilized on regular arrays of titanium nitride ring electrodes of 500 nm diameter and 20 nm widths. The activity of HRP on the electrode chip is measured with a limit of detection of 60 fg HRP by observing the enzymatic turnover of Amplex Red and H₂O₂ to fluorescent resorufin by fluorescence microscopy. The initial activity of the permanently immobilized HRP equals up to 45% of the activity that can be expected for an ideal monolayer of HRP molecules on all electrodes of the array. Localization of the immobilizate on the electrodes is accomplished by staining with the fluorescent product of the enzyme reaction. The high residual activity of enzymes after AC field induced immobilization shows the method's suitability for biosensing and research applications.     

Parameters important in fabricating enzyme electrodes using self-assembled monolayers of alkanethiols.

The fabrication of enzyme electrodes using self-assembled monolayers (SAMs) has attracted considerable interest because of the spatial control over the enzyme immobilization. A model system of glucose oxidase covalently bound to a gold electrode modified with a SAM of 3-mercaptopropionic acid was investigated with regard to the effect of fabrication variables such as the surface topography of the underlying gold electrode, the conditions during covalent attachment of the enzyme and the buffer used. The resultant monolayer enzyme electrodes have excellent sensitivity and dynamic range which can easily be adjusted by controlling the amount of enzyme immobilized. The major drawback of such electrodes is the response which is limited by the kinetics of the enzyme rather than mass transport of substrates. Approaches to bringing such enzyme electrodes into the mass transport limiting regime by exploiting direct electron transfer between the enzyme and the electrode are outlined.     

Hydrogen fuel electrode based on bioelectrocatalysis by the enzyme hydrogenase

Our aim is to show, that the enzymes as electrocatalysts are able to improve the performance characteristics of the fuel cells. The hydrogen fuel electrode based on hydrogenase from Thiocapsa roseopersicina immobilized directly on carbon filament material has been made. The enzyme electrode has operated according to electron tunneling between the enzyme active site and the electrode support; this mechanism is called direct bioelectrocatalysis. Under pure hydrogen the efficiencies in energy conversion of the enzyme electrode and the noble metal based commercial fuel electrode are similar concerning both the hydrogen equilibrium potential achieved and the current densities in H₂ oxidation. However, the use of the enzyme electrodes completely avoids the problem of poisoning the anode by the impurities of carbon monoxide present in reforming gas, which limits the use of cheap hydrogen containing fuel. The stability of the biological catalysts can be drastically improved by their immobilization on electrode supports, which provide the development of commercially competitive biofuel cells.     

Plasma-Polymerized Thin Films for Enzyme Immobilization in Biosensors

Abstract

Polymer films deposited on thin film noble metal electrodes on silicon chips, utilizing plasma polymerization are shown to be suited for immobilization of enzymes. Glucose oxidase is covalently coupled via amino- or carboxyl-groups of polymer films made by plasma polymerization of 2-amino-benzotrifluoride, acrylic or methacrylic acid. The concentration of these active surface groups increases by after-treatment in an ammonia- or oxygen-plasma. A biosensor consisting of a thin film metal electrode, plasma polymer film and immobilized glucose oxidase shows an amperometric response to glucose with a fast response time.     

Probing Biomolecular Interactions at Conductive and Semiconductive Surfaces by Impedance Spectroscopy: Routes to Impedimetric Immunosensors,DNA‐Sensors,and Enzyme Biosensors

Impedance spectroscopy is a rapidly developing electrochemical technique for the characterization of biomaterial‐functionalized electrodes and biocatalytic transformations at electrode surfaces, and specifically for the transduction of biosensing events at electrodes or field‐effect transistor devices. The immobilization of biomaterials, e.g., enzymes, antigens/antibodies or DNA on electrodes or semiconductor surfaces alters the capacitance and interfacial electron transfer resistance of the conductive or semiconductive electrodes. Impedance spectroscopy allows analysis of interfacial changes originating from biorecognition events at electrode surfaces. Kinetics and mechanisms of electron transfer processes corresponding to biocatalytic reactions occurring at modified electrodes can be also derived from Faradaic impedance spectroscopy. Different immunosensors that use impedance measurements for the transduction of antigen‐antibody complex formation on electronic transducers were developed. Similarly, DNA biosensors using impedance measurements as readout signals were developed. Amplified detection of the analyte DNA using Faradaic impedance spectroscopy was accomplished by the coupling of functionalized liposomes or by the association of biocatalytic conjugates to the sensing interface providing biocatalyzed precipitation of an insoluble product on the electrodes. The amplified detections of viral DNA and single‐base mismatches in DNA were accomplished by similar methods. The changes of interfacial features of gate surfaces of field‐effect transistors (FET) upon the formation of antigen‐antibody complexes or assembly of protein arrays were probed by impedance measurements and specifically by transconductance measurements. Impedance spectroscopy was also applied to characterize enzyme‐based biosensors. The reconstitution of apo‐enzymes on cofactor‐functionalized electrodes and the formation of cofactor‐enzyme affinity complexes on electrodes were probed by Faradaic impedance spectroscopy. Also biocatalyzed reactions occurring on electrode surfaces were analyzed by impedance spectroscopy. The theoretical background of the different methods and their practical applications in analytical procedures were outlined in this article.     

Investigation of methods of enzyme immobilization on a coated-wire electrode for the development of micro-biosensors

Tridodecylamine- and carboxyl-substituted poly(vinyl chloride)-based hydrogen ion-selective coated-wire electrodes are investigated as transducers for micro-biosensors. Various methods for immobilization of enzyme on the electrode were evaluated by using penicillinase as a model enzyme. The best method was immobilization with glutaraldehyde on the electrode previously modified with bovine serum albumin in the presence of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide to increase the amount of immobilized enzyme. A stable, large potential change is obtainable even in salt-containing samples with this sensor. The possibility of the practical use of such a micro-biosensor is suggested.     

Immobilization of proteins on boron nitride nanotubes

We report for the first time that proteins are immobilized on boron nitride nanotubes. It is found that there is a natural affinity of a protein to BNNT; this means that it can be immobilized on BNNT directly, without usage of an additional coupling reagent. For the most effective immobilization, noncovalently functionalized BNNTs should be used. The effect of immobilization was studied using high-resolution transmission electron microscopy and energy dispersion spectroscopy.     

Calmodulin-mediated reversible immobilization of enzymes

This work demonstrates the use of the protein calmodulin, CaM, as an affinity tag for the reversible immobilization of enzymes on surfaces. Our strategy takes advantage of the of the reversible, calcium-mediated binding of CaM to its ligand phenothiazine and of the ability to produce fusion proteins between CaM and a variety of enzymes to reversibly immobilize enzymes in an oriented fashion to different surfaces. Specifically, we employed two different enzymes, organophosphorus hydrolase (OPH) and beta-lactamase and two different solid supports, a silica surface and cellulose membrane modified by covalently attaching a phenothiazine ligand, to demonstrate the versatility of our immobilization method. Fusion proteins between CaM-OPH and CaM-beta-lactamase were prepared by using genetic engineering strategies to introduce the calmodulin tail at the N-terminus of each of the two enzymes. In the presence of Ca(2+), CaM adopts a conformation that favors interaction between hydrophobic pockets in CaM and phenothiazine, while in the presence of a Ca(2+)-chelating agent such as EGTA, the interaction between CaM and phenothiazine is disrupted, thus allowing for removal of the CaM-fusion protein from the surface under mild conditions. CaM also acts as a spacer molecule, orienting the enzyme away from the surface and toward the solution, which minimizes enzyme interactions with the immobilization surface. Since the method is based on the highly selective binding of CaM to its phenothiazine ligand, and this is covalently immobilized on the surface, the method does not suffer from ligand leaching nor from interference from other proteins present in the cell extract. An additional advantage lies in that the support can be regenerated by passing through EGTA, and then reused for the immobilization of the same or, if desired, a different enzyme. Using a fusion protein approach for immobilization purposes avoids the use of harsh conditions in the immobilization and/or regeneration steps, which could cause inactivation of the immobilized enzyme. Moreover, we have demonstrated that the CaM affinity tag allows immobilization of enzymes on a variety of surfaces without compromising their enzymatic activity substantially; for example, the immobilized OPH retained more than 80% of the activity of the free enzyme. Our results with beta-lactamase showed the feasibility of using a phenothiazine surface in several consecutive loading and regeneration cycles. This can be advantageous when expensive and/or difficult to obtain immobilization surfaces have to be employed; the immobilization surface could be reused to immobilize the same or a different enzyme using the CaM affinity tail. We also determined that the phenothiazine-modified silica particles are stable for long periods of time, i.e., up to 2 years when stored at 4 degrees C. It is envisioned that this type of reversible immobilization may find applications in the development of reversible, reusable biosensors and bioreactors endowed with the additional advantage that the biological element at the surface of the sensor or bioreactor could be replaced under mild conditions when needed to sense or process a different target molecule.