Intermediates in the intramolecular ligand transfer reactions of h5-C5H5Fe(CO)2R complexes

Dissolution of h⁵-C₅H₅Fe(CO)₂R (I) (R = cyclohexyl or cyclohexylmethyl) in DMSO leads to the formation of a solvent coordinated acyl complex, h⁵-C₅H₅Fe(CO)(COR)(DMSO) (II). Treatment of this complex with triphenylphosphine leads to its conversion to h⁵-C₅H₅Fe(COR)(PPh₃) (III). Rates for the reaction I ? and II → III have been determined. A comparison of the rates of the reaction I → III in eight solvents shows no specific rate acceleration in DMSO and no correlation with solvent donicity. The results are in accord with a two step mechanism in which the first intermediate is the coordiantively-unsaturated species h⁵-C₅H₅Fe(COR)(CO). The small spread in rates for solvents of widely different dielectric constants suggests little charge separation in the transition state for this step.     

Neutron scattering study of the reorientational motions in Cr(CO)3(η6C6H6) and Mn(CO)3(η5C5H5)

Incoherent quasi-eleastic neutron scattering experiments: using different resolutions and a wide Q range, have been performed on polycrystalline samples of Cr(CO)₃(η⁶C₆H₆) and Mn(CO)₃(η⁵C₅H₅) in the 280–320 K temperature range. It is shown that aromatic rings are involved into a reorientational process characterized by an activation energy of ≈ 16 kJ mol^?1 and by correlation times of the order of 2 × 10^?11 s and 5 × 10^?11 s at 300 K for C₆H₆ and C₅H₅ rings respectively. Experimental elastic incoherent structure factors are in agreement with the 2π/6 and 2π/5 jump models and the fitted spectra confirm these models. From a comparison with heat-capacity results we conclude that M(CO)₃ groups are fixed during the reorientational process. Finally a comparison with literature data is presented.     

Synthesis and properties of h5-cyclopentadienyl-(triphenylphosphine)silver(I)

The title compound has been prepared by treatment of a solution of cyclopentadienylsodium and triphenylphosphine in tetrahydrofuran with a solution of silver trifluoromethanesulfonate (AgSO₃CF₃) in tetrahydrofuran. It decomposes slowly at room temperature, but can be stored indefinitely at —80°C. IR spectra indicate that a C₅H₅-h⁵-group is present in the molecule and this conclusion is confirmed by ¹H and ¹³C NMR spectroscopy.     

Photochemistry of (η5)-C5H5)Mn(CO)2[C(C6H5)2]. Generation of the diphenylcarbene radical anion

The electronic absorption spectrum of (η⁵-C₅H₅)Mn(CO)₂[C(C₆H₅)₂]shows an intense maximum which is assigned to a MLCT transition in which the empty p_π orbital on the carbene carbon is populated. Upon irradiation of this band, the complex undergoes a decomposition with a disappearance quantum yield Φ = 0.10 ± 0.01 independent of solvent. In the CT excited state, the complex can be roughly described as containing d⁵ Mn^II and a diphenylcarbene radical anion ligand C(C₆H₅)₂^?. Due to the kinetic lability, the complex decomposes producing a Mn^II species and the free carbene radical anion, which then undergoes secondary reactions. In addition, small amounts of substitution product are observed. It is proposed that prior to total decomposition of the excited state, a radical pair (η⁵-C₅H₅)Mn(CO)₂S⁺/C(C₆H₅)₂^?forms (S = solvent). A back electron transfer from C(C₆H₅)₂^?to the labile cation competes with decomposition to produce the substituted complex and free carbene.     

Preparation and crystal structure of [Bi3I(C4H8O3H2)2(C4H8O3H)5]2Bi8I30 containing the novel polynuclear [Bi8I30] anion

Preparation and crystal structure of the novel compound [Bi₃I(C₄H₈O₃H₂)₂(C₄H₈O₃H)₅]₂Bi₈I₃₀ are reported. The title compound is prepared by heating of BiI₃ and diethylene glycol at 413 K in a sealed quartz glass tube filled with argon. Deep red single crystals are grown and applied to perform X-ray powder diffraction and X-ray single-crystal diffraction measurements. The compound crystallizes triclinic with space group P-1: Z=2, a=13.217(1) Å, b=15.277(1) Å, c=22.498(1) Å, α=84.33(1), β=73.18(1), γ=67.48(1). [Bi₃I(C₄H₈O₃H₂)₂(C₄H₈O₃H)₅]₂Bi₈I₃₀ comprises the novel polynuclear [Bi₈I₃₀]⁶⁻ anion and [Bi₃I(C₄H₈O₃H₂)₂(C₄H₈O₃H)₅]³⁺ as the cation. Cation as well as the anion can be assumed to represent intermediates between solid BiI₃ and BiI₃ completely dissolved in diethylene glycol.     

Photochemistry of methyl- and n1-benzyl-n5-cyclopentadienyltricarbonyltungstein(II)

Irradiation of solutions of n⁵-C₅H₅W(CO)₃R (R  CH₃n1-CH₂C₆H₅) in cyclohexane at ca. 310490 nm leads to the formation of [n⁵-C₅H₅W(CO)₃]₂ and methane and of n⁵-C₅H₅W₅(CO)₂(n³-CH₂C₆H₅) and some [n⁵-C₅H₅W(CO)₃]₂, respectively. When the irradiation is carried out in the presence of excess P(C₆H₅)₃, the photoproducts are n⁵-C₅H₅W(CO)₂[P(C₆H₅)₃]CH₃ (R  CH₃) and n⁵-C₅H₅W(CO)₂(n₃-CH₂C₆H₅) and trace [n⁵-C₅H₅W(CO)₃]₂ (R  n¹-CH₂C₆H₅). Photolysis of the n⁵-C₅H₅W(CO)₃R in the presence of benzyl chloride affords n⁵-C₅H₅W(CO)₃Cl (R  CH₃) and both n⁵-C₅H₅W(CO)₂(n³-CH₂C₂H₅) and n⁵-C₅H₅W(CO)₃Cl (R  n¹-CH₂C₆H₅), the relative amounts of the latter products depending on the quantity of added C₆H₅CH₂Cl. Irradiation of n⁵-C₅H₅W(CO)₃-CH₃ in the presence of both P(C₆h₅)₃ and C₆H₅CH₂Cl affords n⁵-C₅H₅W(CO)₂-[P(C₆H₅)₃]CH₃, but no n⁵-C₅H₅W(CO)₃Cl. It is proposed that the primary photo-reaction in these transformations is dissociation of a CO group from n⁵-C₅H₅W-(CO)₃R to generate n⁵-C₅H₅W(CO)₂R, which can either combine with L to form a stable 18 electron complex, n⁵-C₅H₅W(CO)₂(L)R (L  CO, P(C₅H₅)₃; LR  n³-CH₂C₆H₅), or lose the group R in a competing, apparently slower step. This proposal receives support from the observation that, light intensifies being equal, n⁵-C₅H₅W(CO)₃CH₃ undergoes a considerably faster photoconversion to [n⁵-C₅H₅W(CO)₃]₂ under argon than under carbon monoxide.     

Die thermische reaktion von C5H5(CO)2FeNa mit benzimidchloriden C6H5(Cl)CNR

η⁵-C₅H₅(CO)₂FeNa reacts with the benzimide chlorides C₆H₅(Cl)CNR (R  CH(CH₃)₂, C₆H₅) in boiling THF to give the η¹-iminoacyl complexes η⁵-C₅H₅ (CO)₂Fe[η¹-C(C₆H₅)NR]. Alternatively, the new Fe complexes [η⁵-C₅H₅(CO)Fe$\text{C(C}{}_6\text{H}{}_5\text{)N(CH}{}_3\text{)C(C}{}_6\text{H}{}_5\text{)N}$CH₃PF₆ (IV) and [η⁵-C₅H₅(CO)₂FeC(C₆H₅)N(CH₃)C(C₆H₅)NCH₃]PF₆ (V) are formed under the same conditions, if R  CH₃. Hudrolysis of the CN single bond of the ligand in V, not stabilized by a chelate effects as in IV, results in the formation of [η⁵-C₅H₅(CO)₂FeC(C₆H₅)NHCH₃]PF₆ (VII). Reaction of η⁵-C₅H₅(CO)₂ with N-benyzylbenzimido chloride yields η⁵-C₅H₅(CO)₂FeCH₂C₆H₅ as the only isolated product.     

Crystal and molecular structure of (η3-allyl)carbonylchlorobis(dimethylphenylphosphine)- iridium(III) hexafluorophosphate, [Ir(η3-C3H5)Cl(CO)(P(CH3)2(C6H5))2][PF6

The structure of (η³-allyl)carbonylchlorobis(dimethylphenylphosphine)-iridium(III) hexafluorophosphate, [Ir(η³-C₃H₅)Cl(CO)(P(CH₃)₂(C₆H₅))₂][PF₆], has been determined from three-dimensional X-ray data to add support for a proposed mechanism of the oxidative addition of allyl halides to IrX(CO)(PR₃)₂ (X = halide). The compound crystallizes in space group C⁵_2h-P2₁/c with four formula units in a cell of dimensions a = 11.027(1), b = 12.230(2), c = 19.447(5) Å, and β = 103.16(2)⁰. Least-squares refinement of the structure has led to a value of the conventional R index (on F) of 0.066 for the 3018 independent reflections having F²₀>3—(F²₀). The crystal structure consists of discrete, monomericions. The hexafluorophosphate anion is disordered. The coordination geometry around the iridium atom may be described as octahedral, with the chloro ligand trans to the carbonyl group and each phosphorus atom trans to a terminal carbon of the allyl group. Structural parameters: Ir—P = 2.366(4), 2.347(3);Ir—Cl = 2.389(3); Ir—C(allyl) = 2.28(1), 2.24(1),2.25(1); Ir—C (carbonyl) = 1.85(1) Å; P—Ir—P = 105.7(1); C(terminal)—Ir—C(terminal) = 66.2(8); C—C—C = 125(2)^o. The allyl group makes an angle of 126^o with the P—Ir—P plane. Correlations between geometric structure and number of d electrons are noted among several M—C₃H₅-complexes, and are interpreted in the light of theoretical models of the M—C₃H₅- bond.     

The synthesis and decarbonylation of (η5-C5H5)Mo(Co)2(COCH3)E(C6H5)3, where E is arsenic or antimony

The synthesis of the title compounds by reaction of (η⁵-C₅H₅)Mo(CO)₃CH₃ with excess As(C₆H₅)₃ or Sb(C₆H₅)₃ in CH₃CN is described. Thermal decarbonylation results in the preferential ejection of As(C₆H₅)₃ or Sb(C₆H₅)₃ from the new acetyl complexes, which accounts for the failure of previous attempts to synthesise the acetyl complexes. Photolytic decarbonylations lead to new-alkyl complexes (η⁵-C₅H₅)Mo(CO)₂(CH₃)E(C₆H₅)₃. IR and NMR data for the new complexes are tabulated.     

Synthesis and x-ray crystallographic structural determination of the acetylene complex (η5−C5H5)2W2(CO)4(C2H2)

Reaction of photogenerated (η⁵?C₅H₅)₂W₂(CO)₄ with acetylene at 25°C yields a complex of the formula (η⁵-C₅H₅)₂W₂(CO)₄(C₂H₂). The crystal structure of the complex shows it to have a tetrahedrane-like W₂C₂ core. The C—C bond distance of the C₂H₂ unit is 1.33 Å which is close to that of ethylene, considerably longer than the 1.20 Å for acetylenes. The W—W distance is 2.987 Å which is ～0.25 Å shorter than the W—W distance in (η⁵-C₅H₅)₂W₂(CO)₆ but longer than that expected for (η⁵-C₅H₅)₂W₂(CO)₄. By analogy to the parent (η⁵-C₅H₅)₂M₂(CO)₆ species, the near-UV absorption in (η⁵-C₅H₅)₂M₂(CO)₄(C₂H₂) is assigned to a σ_b → σ^* transition. Owing to the shorter M—M bond in the C₂H₂ adducts, the σ_b → σ^* absorption is at higher energy than in the (η⁵-C₅H₅)₂M₂(CO)₆ complexes.     

Metal-pentaborane(9) derivatives: 2-[Co(CO)4]B5H8 and 2[(η5-C5H5)Fe(CO)2]B5H8

Reaction of 2-XB₅H₈ (X  Cl, Br) with Naco(CO)₄ produces the transiently stable 2-[Co(CO)₄]B₅H₈. The similar 2-[(η⁵-C₅H₅)Fe(CO)₂]B₅H₈, which exhibits much greater thermal stability, is prepared by reaction of LiB₅H₈ with (η⁵-C₅H₅)Fe(CO)₂I. Reactions of CO₂(CO)₈ with B₅H₉ under a variety of conditions produce 2-[Co(CO)₄]B₅H₈ along with an inseparable impurity that appears to be 1-[Co(CO)₄]B₅H₈.     

The chemistry of the transition metalcarbon σ-bond. Insertion reactions between stannous chloride and h1-allyl and h1-propargyl complexes of h5-cyclopentadienyldicarbonyliron

The reactions between h⁵-CpFe(CO)₂R (R = CH₂CHCH₂; CH₂CMe=CH₂; CH₂CHCHMe; CH₂CHCMe₂) and stannous chloride in tetrahydrofuran afford the insertion products h⁵-CpFe(CO)₂SnCl₂R. When treated with stannous chloride in methanol or with excess stannous chloride in tetrahydrofuran, h⁵-CpFe(CO)₂CH₂CMeCH₂ affords primarily h⁵-CpFe(CO)₂SnCl₃. The allenyl, 2-butynyl or cationic isobutylene complexes (R = CHCCH₂; CH₂ CCMe; CH₂CMe⁺₂) yield only h⁵-CpFe(CO)₂SnCl₃. Stannous iodide reacts with h⁵-CpFe(CO)₂CH₂CHCH₂ in benzene to form h⁵-CpFe(CO)₂I. Plumbous chloride in methanol fails to react with the above complexes.     

Polymerization of ethylene with the system (C5H5)2TiEtCl-AlEtCl2

The catalytic system (C₅H₅)₂TiEtCl-AlEtCl₂ in benzene and heptane was investigated. Only two species are formed at an equimolar ratio Al: Ti, viz. active (C₅H₅)₂TiEtCl.AlEtCl₂ (I) and inactive (C₅H₅)₂TiCl.AlEtCl₂ formed from (I). The rate constant of propagation is k_p^20° = 6.4 l/mole sec and is independent of the medium. The rate of polymerization decreases with time because of valence reduction. The bimolecular law is obeyed during a run but the apparent termination constant is inversely proportional to the initial catalyst concentration. The kinetic data with different ratios Al:Ti and the dependence of the number of polymer molecules/Ti atom show that AlEtCl₂ is a termination agent and a chain transfer agent.     

Mechanism of the thermal decomposition of (η5-C5H5)Fe(CO)2(η1-acenaphthenyl)

The complexes (η⁵-C₅H₅)Fe(CO)₂(η¹-acenaphthenyl) (I), (η⁵-C₅H₅)Fe(CO)₂ (η¹-trans-β-deuterioacenaphthenyl) (II), and (η-C₅D₅)Fe(CO)₂, (η¹-acenaphthenyl) (XIII) have been prepared and their thermal decomposition studied in vacuo and in refluxing toluene. All three complexes decompose to produce mixtures of acenaphthene (VII), acenaphthylene (VIII), and [C₅H₅Fe(CO)₂]₂ (VI). Biacenaphthenyl (IX) is also obtained from the thermolysis of I in toluene. The formation of alkene VIII, and, to a lesser extent, alkane VII is suppressed by external CO. Thermolysis of I in toluene-d₈ and of II in vacuo and in toluene produces deuterium-enriched VII. The acenaphthene generated from the decomposition of XIII also contains deuterium. The above observations are accomodated by a mechanistic scheme involving competing β-elimination, ironcarbon bond homolysis to produce the acenaphthenyl radical, and CpH abstraction by an undetermined pathway.     

Metal carbonyl complexes of 3,5-dimethylaceheptylene. Synthesis and molecular structures of (C14H8Me2)Mn2(CO)6 and (C14H8Me2)Fe3(CO)8

The reactions of the non-alternant polycyclic aromatic hydrocarbon 3,5-dimethylaceheptylene, C₁₄H₈Me₂, with various transition metal carbonyls and the molecular geometry of the compounds (C₁₄H₈Me₂)Mn₂(CO)₆ and (C₁₄H₈Me₂)Fe₃(CO)₈ is shown.     

Dynamic Jahn–Teller effect and average structure of dicyclopentadienylcobalt, (C5H5)2Co,studied by gas phase electron diffraction

The molecular structure of (C₅H₅)₂Co has been determined by gas phase electron diffraction. The best agreement between calculated and experimental intensity curves is obtained with a model with eclipsed C₅H₅ rings (symmetry D_5h), but a model with staggered rings (symmetry D_5d) cannot be ruled out. The mean CoC and CC bond distances are 2.119(3) Å and 1.429(2) Å respectively. The average angle between the CH bonds and the C₅ ring is 2.1(0.8)°. The value obtained for the CC vibrational amplitude, l(CC) = 0.055(1) Å, is significantly larger than the amplitude calculated from a molecular force field and the corresponding amplitudes in (C₅H₅)₂Fe and (C₅H₅)₂Ni determined by electron diffraction, and confirms the presence of a dynamic Jahn—Teller effect of the magnitude calculated from ESR data. The average structure is compared with those of the metallocenes of the other first row transition elements.     

Syntheses of platinum(II) complexes of cyclo-octenyl group and isolation of a self-assembled oxo-bridged macrocyclic complex [Pt4(Spy)4(C8H12-O-C8H12)2]

Reactions of [Pt₂(μ-Cl)₂(C₈H₁₂OMe)₂] (1) (C₈H₁₂OMe = 8-methoxy-cyclooct-4-ene-1-yl) with various anionic chalcogenolate ligands have been investigated. The reaction of 1 with Pb(Spy)₂ (HSpy = pyridine-2-thiol) yielded a binuclear complex [Pt₂(Spy)₂(C₈H₁₂OMe)₂] (2). A trinuclear complex [Pt₃(Spy)₄(C₈H₁₂OMe)₂] (3) was isolated by a reaction between 2 and [Pt(Spy)₂]_n. The reaction of 1 with HSpy in the presence of NaOMe generated 2 and its demethylated oxo-bridged tetranuclear complex [Pt₄(Spy)₄(C₈H₁₂-O-C₈H₁₂)₂] (4). Treatment of 1 with ammonium diisopropyldithiophosphate completely replaced C₈H₁₂OMe resulting in [Pt(S₂P{OPrⁱ}₂)₂] (5), whereas non-rigid 5-membered chelating ligand, Me₂NCH₂CH₂E⁻, produced mononuclear complexes [Pt(ECH₂CH₂NMe₂)(C₈H₁₂OMe)] (E = S (6), Se (7)). These complexes have been characterized by elemental analyses, NMR (¹H, ¹³C{¹H}, ¹⁹⁵Pt{¹H}) and absorption spectroscopy. Molecular structures of 2, 3, 4, 5 and 7 were established by single crystal X-ray diffraction analyses. Thermolysis of 2, 6 and 7 in HDA gave platinum nanoparticles.     

The structure of C2H5InBr2 · tmen,C2H5InI2 · tmen (tmen = N,N,N,′,N′-tetramethylethanediamine) and [(C6H5)4P][C2H5InI3] in solution and in the solid state

The ¹H NMR spectra of C₂H₅InBr₂ · tmen (1) C₂H₅InI₂ · tmen (2) (tmen = N,N,N′,N′-tetramethylethanediamme) and [(C₆H₅)₄P][C₂H₅InI₃] (3) show only a broad singlet for the ethyl protons at 60 MHz. Spectra run at 400 MHz resolve these into a triplet + quartet for 1 and 3. The structure of each compound has been determined by X-ray crystallography; 1 and 2 are five-coordinate species, with InC₂N₂X (X = Br, I) nuclei, while 3 consists of [(C₆H₅)₄P]⁺ cations and anions whose InCI₃ nucleus has C_3v, symmetry.     

Synthesis, Characterization And Biphasic Catalysiswith RuCl(η5-C5H5)(TPPMS)2

A synthetic route is reported for the water soluble complex RuCl(h⁵- C₅H₅)(TPPMS)₂(1), (TPPMS = (C₆H₅)₂P(C₆H₄-m-SO₃Na) and characterized by UV-Vis, FTIR, ¹H, ¹³C NMR and GC-MS. Complex 1 is a good catalytic precursor in biphasic media (toluene/ water) for 1-hexene hydrogenation under moderate reaction conditions (e.g. 500 psi H₂, 100°C) giving good yields of n-hexane, and smaller amounts of cis-2-hexene and trans-2-hexene. Other organic substrates (cinnamaldehyde, crotonaldehyde, cyclohexene, acetone and butylaldehyde) are hydrogenated.     

Darstellung und eigenschaften von und reaktionen mit metallhaltigen heterocyclen XXII. Synthese, eigenschaften und kristallstruktur des sechsgliedrigen heterocyclus [(h-C5H5)NiSP(CH3)2]2 und dessen verhalten gegenüber alkinen

The heterocycle [(h⁵-C₅H₅)NiSP(CH₃)₂]₂ is obtained by treatment of (h⁵-C₅H₅)₂Ni with (CH₃)₂HPS in toluene and crystallizes monoclinic in the space group P2₁/c with Z = 2. The highly reactive three-membered ring (h⁵-C₅H₅)$\text{NiSP}$(CH₃)₂ which is a dissociation product of [(h⁵-C₅H₅)NiSP(CH₃)₂]₂, can be trapped with bis(methoxycarbonyl)acetylene to give the PS containing nickelacyclopentadiene (h⁵-C₅H₅)$\text{NiSP(CH}{}_3\text{)}{}_2\text{CRC}$R (R  CO₂CH₃).