A rapid and sensitive CE method with field-enhanced sample injection and in-capillary derivatization for selenomethionine metabolism catalyzed by flavin-containing monooxygenases

A rapid and sensitive electrophoretically mediated microanalysis method with field-enhanced sample injection (FESI) for in-capillary derivatization was developed to determine selenomethionine (SeMet) and selenomethionine selenoxide (SeOMet). Phthalic anhydride (PA) was selected as the derivatization reagent due to the fast reaction at room temperature and the stability of derivatives. The in-capillary derivatization was accomplished by electrophoretically mixing PA and sample plugs. PA reagent was introduced hydrodynamically into the capillary, whereas the sample solution was injected electrokinetically, thus allowing a selective preconcentration of the analytes by FESI. For FESI, the optimum sample solvent was 2 mM borate solution. The borate buffer was suitable for both in-capillary derivatization and separation of the derivatives. The combination of electrophoretically mediated microanalysis with FESI for in-capillary derivatization was successfully achieved with about 800-fold concentration sensitivity enhancement compared to direct CE-UV detection in the same setup. The present method is miniaturized and fully automated, which ensures the on-line derivatization, stacking, separation and detection in 10 min. Finally, the developed method was successfully applied to measure enzyme activities by analyzing the reaction mixtures of SeMet with human flavin-containing monooxygenases (FMO). The results showed that both FMO1 and FMO3, but not FMO5 could catalyze the Se-oxygenation of SeMet.     

In-capillary derivatization and laser-induced fluorescence detection for the analysis of organophosphorus pesticides by micellar electrokinetic chromatography

We developed a rapid and sensitive method using in-capillary derivatization and laser-induced fluorescence (LIF) detection for the fully automated analysis of organophosphorus pesticides (OPPs), including glufosinate, aminomethylphosphonic acid (AMPA) and glyphosate by micellar electrokinetic chromatography (MEKC). The potential of 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) as in-capillary derivatization reagent is described for the first time. The unique feature of this MEKC method is the capillary being used as a small reaction chamber. In in-capillary derivatization, the sample and reagent solutions were injected directly into the capillary by tandem mode, followed by an electrokinetic step to enhance the mixing efficiency of analytes and reagent plugs in accordance with their different electrophoretic mobilities. Standing a specified time for reaction, the derivatives were then immediately separated and determined. Careful optimization of the derivatization and separation conditions allowed the determination of glufosinate, AMPA and glyphosate with detection limits of 2.8, 3.6 and 32.2 ng/mL, respectively. These detection limits were comparable to those of 1.4, 1.9 and 23.8 ng/mL obtained from conventional pre-capillary derivatization. Furthermore, repeatability better than 0.40% for migration time and 3.4% for peak area, as well as shorter migration time, was obtained. The method was successfully applied to the analysis of spiked river water sample with satisfactory results.     

Strategies for in-capillary derivatization of amino acids in capillary electrophoresis using 1,2-naphthoquinone-4-sulfonate as a labeling reagent.

This paper examines the potentiality of in-capillary derivatization for improving the sensitivity of the spectrophotometric detection of amino acids in capillary zone electrophoresis. 1,2-Naphthoquinone-4-sulfonate was selected as the labeling agent of amino acids. The underivatized sample and the reagent solution segments are injected by pressure into the capillary prior to applying the running voltage. The corresponding derivatization reaction occurs inside the capillary once the potential is applied, as it induces mixing of the sample with the reagent. Several introduction modes consisting of tandem or sandwich configuration have been evaluated. These techniques result in a straightforward and automated way of carrying out a derivatization. Furthermore, in-capillary procedures may become much more attractive than conventional pre-capillary derivatization in terms of sensitivity and reproducibility. The optimum operation mode found consists of a sandwich system where the sample is injected in between two reagent segments. The method was applied to the determination of amino acids in feed samples. Results show a good concordance with those given by a standard amino acid analyzer.     

Constant pressure-assisted head-column field-amplified sample injection in combination with in-capillary derivatization for enhancing the sensitivity of capillary electrophoresis

In this work, a novel method combining constant pressure-assisted head-column field-amplified sample injection (PA-HC-FASI) with in-capillary derivatization was developed for enhancing the sensitivity of capillary electrophoresis. PA-HC-FASI uses an appropriate positive pressure to counterbalance the electroosmotic flow in the capillary column during electrokinetic injection, while taking advantage of the field amplification in the sample matrix and the water of the “head column”. Accordingly, the analytes were stacked at the stationary boundary between water and background electrolyte. After 600 s PA-HC-FASI, 4-fluoro-7-nitro-2,1,3-benzoxadiazole as derivatization reagent was injected, followed by an electrokinetic step (5 kV, 45 s) to enhance the mixing efficiency of analytes and reagent plugs. Standing a specified time of 10 min for derivatization reaction under 35 °C, then the capillary temperature was cooled to 25 °C and the derivatives were immediately separated and determined under 25 °C. By investigating the variables of the presented approach in detail, on-line preconcentration, derivatization and separation could be automatically operated in one run and required no modification of current CE commercial instrument. Moreover, the sensitivity enhancement factor of 520 and 800 together with the detection limits of 16.32 and 6.34 pg/mL was achieved for model compounds: glufosinate and aminomethylphosphonic acid, demonstrating the high detection sensitivity of the presented method.     

On-line sample preconcentration with chemical derivatization of bacterial biomarkers by capillary electrophoresis: a dual strategy for integrating sample pretreatment with chemical analysis

Simple, selective yet sensitive methods to quantify low-abundance bacterial biomarkers derived from complex samples are required in clinical, biological, and environmental applications. In this report, a new strategy to integrate sample pretreatment with chemical analysis is investigated using on-line preconcentration with chemical derivatization by CE and UV detection. Single-step enantioselective analysis of muramic acid (MA) and diaminopimelic acid (DAP) was achieved by CE via sample enrichment by dynamic pH junction with ortho-phthalaldehyde/N-acetyl-L-cysteine labeling directly in-capillary. The optimized method resulted in up to a 100-fold enhancement in concentration sensitivity compared to conventional off-line derivatization procedures. The method was also applied toward the detection of micromolar levels of MA and DAP excreted in the extracellular medium of Escherichia coli bacterial cell cultures. On-line preconcentration with chemical derivatization by CE represents a unique approach for conducting rapid, sensitive, and high-throughput analyses of other classes of amino acid and amino sugar metabolites with reduced sample handling, where the capillary functions simultaneously as a concentrator, microreactor, and chiral selector.     

In-capillary derivatization and analysis of ephedrine and pseudoephedrine by micellar electrokinetic chromatography with laser-induced fluorescence detection

This paper describes an automatic rapid approach for in-capillary derivatization of ephedrine (E) and pseudoephedrine (PE) and subsequent sensitive determination of the derivatives by micellar electrokinetic chromatography (MEKC) with laser-induced fluorescence (LIF) detection using 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) as fluorescent reagent. The unique feature of this method is the capillary being used as a small reaction chamber, in which the sample, derivatization buffer and reagent solutions were injected directly into the capillary by tandem mode, followed by an electrokinetic step (5 kV, 15s) to enhance the mixing efficiency of analytes and reagent plugs. Standing a specified time of 1 min for reaction, the derivatives were then immediately separated and determined. Several parameters for in-capillary derivatization and subsequent MEKC separation were systematically investigated. Under these optimized conditions, a baseline separation of the two analytes was achieved within 10 min and the derivatization concentration limits of detection were found to be 4.8 ng mL(-1) for E and 1.6 ng mL(-1) for PE, respectively. The method was validated in terms of precision, linearity, accuracy and successfully applied for the determination of the two alkaloids in ephedra herb and its preparations.     

Field-amplified sample injection and in-capillary derivatization for capillary electrophoretic analysis of metal ions in local wines

In-capillary derivatization and field-amplified sample injection (FASI) coupled to capillary zone electrophoresis (CZE) was evaluated for the analysis of metals (Co(II), Cu(II), Ni(II), and Fe(II)) using 2-(5-Nitro-2-Pyridylazo)-5-(N-Propyl-N-Sulfopropylamino)Phenol (Nitro-PAPS) as the derivatizing agent. For FASI, the optimum conditions were water as sample solvent, 1 s hydrodynamic injection (0.1 psi) of a water plug, 5 s of electrokinetic introduction (10 kV) of the sample. The in-capillary derivatization was successfully achieved with zone-passing strategy in order tandem injection of Nitro-PAPS reagent (0.5 psi, 7 s), a small water plug (0.1 psi, 1 s), and metal ion introduction (10 kV, 5 s). The solution of 45 mmol L^− 1 borate pH 9.7 and 1.0 × 10^− 5 mol L^− 1 Nitro-PAPS containing 20% acetonitrile was used as the running buffer. The limit of detection obtained by the proposed method was lower than those from pre-capillary derivatization about 3–28 times. The recovery of the method was comparable to pre-capillary derivatization method. In-capillary derivatization-FASI-CZE was applied to analysis of metals in wine samples. The results were compared with those obtained by CZE with pre-capillary derivatization method and atomic absorption spectrometry (AAS).     

Capillary electrophoretic analysis of carbohydrates derivatized by in-capillary condensation with 1-phenyl-3-methyl-5-pyrazolone

Our previous papers on capillary electrophoresis (CE) have shown that samples can be derivatized in a capillary and the derivatives can be analyzed immediately after derivatization, provided that the derivatization reaction is so rapid as to complete in seconds. The present paper presents extended application of in-capillary derivatization to a much slower reaction such as the condensation of reducing carbohydrates with 1-phenyl-3-methyl-5-pyrazolone (PMP) which requires 30 min at 70 degrees C in pre-column derivatization by manual operation. It was necessary to first drive the introduced plugs of sample and reagent solutions to put them together at the entrance of the heated portion of a capillary, then to allow the superimposed plugs to react for a relevant period. We showed how to determine the introduction times of the sample and the reagent solutions as well as intermediate running buffer, the voltages to be applied for plug driving and product analysis, and the duration of voltage application, all of which are important for effective in-capillary derivatization. An example of the analysis of maltooligosaccharides by this technique is presented. It was shown that maltooligosaccharides were quantitatively derivatized with PMP in 35 min at 57 degrees C, and the derivatives could be analyzed in ca. 15 min by CE immediately after derivatization. Separation was satisfactory in 200 mM borate buffer, pH 8.2 containing sodium dodecyl sulfate to a concentration of 200 mM. Although the theoretical plate number, and accordingly the resolution, were significantly lower than the corresponding values in pre-capillary derivatization, reasonable reproducibility was ensured for both migration time (RSD 3.5% on average) and peak area (RSD less than 3%) under the optimized conditions. It is notable that sample amount could be lowered to the 10 fmol level, in contrast to the 10 pmol level in pre-capillary derivatization. In addition, since the technique employed here (the modified at-inlet technique of in-capillary derivatization) is easily automated, the established system will be highly beneficial for routine analysis of carbohydrates. Analysis by this technique was also shown to be useful for kinetic study of the derivatization reaction.     

Sensitivity enhancement by on-line preconcentration and in-capillary derivatization for the electrophoretic determination of amino acids

This study describes an application of on-line preconcentration by large-volume stacking in combination with in-capillary derivatization for enhancing spectrophotometric detection sensitivity in capillary electrophoresis. The method is illustrated by an example dealing with the determination of amino acids with 1,2-naphthoquinone-4-sulfonate as a labelling agent. Samples are dissolved in water in order to create a stacking process based on differences in the conductivity between this medium and a concentrated running buffer. The in-capillary derivatization is accomplished following a sandwich procedure in which the sample is inserted between two segments of reagent. Amino acid derivatives are obtained and separated in a fused-silica capillary with a sodium borate electrolyte buffer using 2-propanol as an organic modifier. The method is applied to the analysis of amino acids in pharmaceutical and feed samples. A good concordance between the predicted values and those obtained with the standard method is observed, with overall quantification error below 5%. The proposed procedure allows the detection limits sensitivity to be enhanced in 1000-fold with respect to conventional precapillary derivatization.     

Enhanced sensitivity and resolution for the analysis of paralytic shellfish poisoning toxins in water using capillary electrophoresis with amperometric detection and field‐amplified sample injection

The profiling of the most lethal paralytic shellfish poisoning toxins (PSTs) in freshwater has increased the need to establish an alternative analytical method with high sensitivity and resolution. In this paper, a coupling technique of field‐amplified sample injection (FASI) and CE with end‐column amperometric detection (CE‐AD) was developed to improve the detection sensitivity and separation of PSTs by electrokinetically injecting a water plug of analytes to the capillary filled with a high‐conductivity BGE. Parameters affecting FASI and CE process were carefully adjusted to achieve the highest response and resolution. Separation selectivity for PSTs, especially for the analogues and epimers, was greatly enhanced by using 40 mM Britton–Robinson buffer (pH 9.5) as BGE, which altered the EOF and mobility of the analytes that interacted with polyborate ions. Satisfactory linear relationship between peak current and concentration of toxins were gained over a wide range of 1.95–254 μg/L. The detection limits (S/N = 3) for five PSTs ranged from 0.63 to 3.11 μg/L, which are below the health alert level in drinking water. In comparison with the up‐to‐date reporting chromatographic methods, the FASI‐CE‐AD method was simple, low‐cost, selective, and sensitive enough for direct quantification of PSTs at very low levels, implying a potential for screening and monitoring of PSTs in surface waters.     

Capillary electrophoresis determination of biogenic amines by field-amplified sample stacking and in-capillary derivatization

A sensitive CE method for determining biogenic amines in wines based on in-capillary derivatization with 1,2-naphthoquinone-4-sulfonate is presented. In this method, reagent and buffer solutions are introduced hydrodynamically into the capillary whereas the sample is injected electrokinetically, thus, allowing a selective preconcentration of the analytes by field-amplified sample stacking. Amines are labeled inside the capillary using a zone-passing derivatization approach in mixed tandem mode. The most relevant variables influencing on the derivatization and separation as well as significant interactions have been evaluated using experimental design. Multi-criteria decision making is utilized for the simultaneous optimization of interacting variables through overall desirability response surfaces. The validation of the method has proven an excellent separation performance and accuracy for the determination of biogenic amines such as histamine, tryptamine, phenylethylamine, tyramine, agmatine, ethanolamine, serotonin, cadaverine, and putrescine in red wines. Detection limits range from 0.02 mg/L for ethanolamine to 0.91 mg/L for serotonin. The RSDs for migration time and peak area are around 1.2 and 6.2%, respectively. Red wines from different Spanish regions have been analyzed using the proposed method.     

Solid-phase microextraction coupled with capillary electrophoresis for the determination of propranolol enantiomers in urine using a sol-gel derived calix[4]arene fiber

A new type of diglycidyloxy-calix[4]arene coated fiber made by sol-gel method was initially prepared for capillary electrophoresis (CE) sample pretreatment. By using headspace solid-phase microextraction (SPME) combined with a novel back-extraction facility coupled off-line to capillary zone electrophoresis (CZE), the simultaneous determination of propranolol enantiomers in human urine was achieved. The clean up effect and preconcentration effect were realized for the first time without derivatization during the SPME process in terms of these strong polarity and thermal stable compounds. Ultrasonic back-extraction and field amplified sample injection (FASI) technologies were employed. Extraction and back-extraction parameters were optimized. Preconcentration of the sample by calix[4]arene fiber based SPME and FASI increased the sensitivity, yielding a limit of detection (LOD) of 0.01microg/ml by CZE-diode array detection (DAD). Method repeatability (RSD<6.5%) and fiber reusability (>150 extraction procedures) were observed over a linear range (0.05-10microg/ml) in urine samples. Based on the superior thermal stability, high alkali- and solvent-resistant ability, marvelous repeatability and long lifetime of the novel fiber, this SPME-FASI-CZE procedure could meet the demand of minimum required performance limit (MRPL) set by the World Anti-doping Agency (WADA) for the detection of propranolol in urine samples.     

Simultaneous analysis of lead, mercury and selenium species by capillary electrophoresis with combined ethylenediaminetetraacetic acid complexation and field-amplified stacking injection.

In this study, speciation analysis was carried out for multispecies of lead, mercury and selenium by capillary electrophoresis (CE) with combined complexation and field-amplified stacking injection (FASI). Ethylenediaminetetraacetic acid (EDTA) was added to the sample mixture to form UV-absorbing complexes with the analytes, thus enabling direct UV detection. It was also used in the running electrolyte to improve resolution. Under optimal conditions, ten analytes were baseline-separated within 20 min. The influence of operational conditions (pH, EDTA concentration, sodium dodecyl sulfate concentration) on the electrophoretic behavior of the species was studied. The analyte-related parameters were calculated based on the migration equation. Enhancement of detection, up to 1700-fold, was achieved for the charged complexes with FASI, and sub-ng/mL detection limits were obtained. The performance of this method was compared with high-performance liquid chromatography, gas chromatography and other CE procedures.     

Capillary electrophoresis‐laser‐induced fluorescence detection of rat brain catecholamines with microwave‐assisted derivatization

In this study, a rapid and sensitive method is described for the catecholamines detection in rat brain. CE with LIF detection for the determination of FITC derivatized catecholamines (dopamine, epinephrine, and norepinephrine) was demonstrated. Conventional water bath and microwave‐assisted derivatization methods were employed and a significant reduction in the derivatization time from 2 h for the conventional water bath at room temperature (ca. 25°C) to 2 min for the microwave‐assisted derivatization was achieved. Online sample concentration of field‐amplified sample stacking (FASS) method was employed to achieve higher sensitivities (the detection limits obtained in the normal injection mode ranged from 2.6 to 4.5 ng L^?1 and in the FASS mode ranged from 22 to 34 pg L^?1). Furthermore, this microwave‐assisted derivatization CE–LIF method successfully determined catecholamines in rat brain with as low as 100 ng L^?1 (FASS mode) to 10 μg L^?1 (normal injection mode). This CE–LIF method provided better detection ability when compared to the best reports on catecholamines analyses.     

Recent developments and applications of EMMA in enzymatic and derivatization reactions

This review provides systematic coverage of examples in the field of in-capillary electrophorecially mediated microanalysis (EMMA). The recent developments and applications in the time period up to mid 2011 have been described, as well as relevant older papers. The basic principles and modes of in-capillary assays have been demonstrated. An overview is also given of the various injection, separation and detection modes implemented in combination with EMMA. The review is presented in two parts mainly dealing with (i) enzymatic and (ii) derivatization or chemical reactions. Finally, the future trends of CE in performing and monitoring reactions have been drawn.     

Application of capillary electrophoresis with field-amplified sample injection for the detection of new adrenoreceptor antagonist enantiomers in plasma in the low ng/mL concentration range

Throughout the separation of chiral basic drugs by capillary electrophoresis (CE) with neutral hydroxypropyl-beta-cyclodextrin (HP-beta-CD) as chiral selector, the sensitivity of detection has been improved by using field-amplified sample injection (FASI). In the present work, this on-line stacking method has been used to detect low ng/mL levels of cationic enantiomers of a new adrenoreceptor antagonist in plasma. A systematic study of the parameters affecting on-line concentration of these enantiomers (nature of the preinjection plug, composition of sample solvent, injection times of water and sample plugs) has been performed enabling the detection sensitivity of antagonist enantiomers to be improved by 180 times compared with usual hydrodynamic injection. The quantification of each adrenoreceptor antagonist enantiomer in plasma samples was then performed in the 2-100 ng/mL (or 8-400 nM) concentration range after a solid-phase extraction step. Using this FASI-CE-UV procedure, the limit of quantification (LOQ) for each enantiomer was in the low ng/mL concentration range (3 ng/mL or 10 nM).     

Field-amplified online sample stacking capillary electrophoresis UV detection for plasma malondialdehyde measurement

Malondialdehyde (MDA) determination is the most widely used method for monitoring lipid peroxidation. Here, we describe an easy field-amplified sample injection (FASI) CE method with UV detection for the detection of free plasma MDA. MDA was detected within 8 min by using 200 mmol/L Tris phosphate pH 5.0 as running buffer. Plasma samples treated with ACN for protein elimination were directly injected on capillary without complex cleanup and/or sample derivatization procedures. Using electrokinetic injection, the detection limit in real sample was 3 nmol/L, thus improving of about 100-fold the LOD of the previous described methods based on CE. Precision tests indicate a good repeatability of our method both for migration times (CV = 1.11%) and for areas (CV = 2.05%). Moreover, a good reproducibility of intra- and inter-assay tests was obtained (CV = 2.55% and CV = 5.14%, respectively). Suitability of the method was tested by measuring MDA levels in 44 healthy volunteers.     

Speciation of chromium by in-capillary derivatization and electrophoretically mediated microanalysis

An electrophoretic method for chromium speciation analysis--as Cr(III) and Cr(VI)--based on in-capillary derivatization with 1,5-diphenylcarbazide (DPC) is here proposed. As Cr(III) does not react with DPC, it was oxidized also in-capillary to Cr(VI) by Ce(IV). For this purpose, a capillary electrophoresis (CE) mode called electrophoretically mediated microanalysis (EMMA) based on sequential injection of sample and reagents--namely, DPC, sample and Ce(IV)--was employed. The conditions of both reactions--Cr(III) oxidation and Cr(VI)-DPC derivatization--were optimized in order to quantify separately the Cr(VI)-DPC complex from the original Cr(VI) in the sample and that from oxidation of Cr(III) to Cr(VI). The electrophoretic conditions were independently optimized for variables influencing the resolution and those affecting sensitivity. The method thus developed was applied to the determination of Cr(III) and Cr(VI) in glass material, for which different sample preparation methods--namely, EPA method 3060A, ultrasound-assisted leaching and microwave-assisted digestion--were tested. Microwave-assisted digestion was found to be the best sample preparation alternative in terms of efficiency of the step--99.6 and 98.3% for Cr(VI) and Cr(III), respectively--and procedure time--20 min. The complete method was validated with the certified reference material BAM-S004.     

In-capillary derivatization and capillary electrophoresis separation of amino acid neurotransmitters from brain microdialysis samples

A new in-capillary derivatization method with naphtalene-2,3-dicarboxyaldehyde (NDA)/CN(-) has been developed for capillary electrophoresis with laser-induced fluorescence detection of brain microdialysate amino acids. Samples are sandwiched between two plugs of reagent mixture at the capillary inlet and subsequently separated. Highest derivatization yields are obtained by using a reagent to sample plug length ratio equal to 4, performing a first electrophoretic mixing followed by a zero potential amplification step before applying the separation voltage and using a NaCN to NDA concentration ratio equal to 1. This new single-step methodology allows the analysis of amino acid neurotransmitters in rat brain microdialysis samples.     

Combination of large‐volume sample stacking with an electroosmotic flow pump with field‐amplified sample injection on cross‐channel chips

A combination of two online sample concentration techniques, large‐volume sample stacking with an electroosmotic flow (EOF) pump (LVSEP) and field‐amplified sample injection (FASI), was investigated in microchip electrophoresis (MCE) to achieve highly sensitive analysis. By applying reversed‐polarity voltages on a cross‐channel microchip, anionic analytes injected throughout a microchannel were first concentrated on the basis of LVSEP, followed by the electrokinetic stacking injection of the analytes from a sample reservoir by the FASI mechanism. As well as the voltage application, a pressure was also applied to the sample reservoir in LVSEP‐FASI. The applied pressure generated a counter‐flow against the EOF to reduce the migration velocity of the stacked analytes, especially around the cross section of the microchannel, which facilitated the FASI concentration. At the hydrodynamic pressure of 15 Pa, 4520‐fold sensitivity increase was obtained in the LVSEP‐FASI analysis of a standard dye, which was 33‐times higher than that obtained with a normal LVSEP. Furthermore, the use of the sharper channel was effective for enhancing the sensitivity, e.g., 29 100‐fold sensitivity increase was achieved with the 75‐μm wide channel. The developed method was applied to the chiral analysis of amino acids in MCE, resulting in the sensitivity enhancement factor of 2920 for the separated d ‐leucine.