YAG:Ce,Tb磷光体中的能量传递现象

引言 Ce3+和Tb3+等稀土离子激活的YAG发光材料已引起人们的兴趣.我们对YAG:Ce,Tb磷光体的阴极射线发光性质已进行了研究.在进一步研究时,我们发现在紫外线激发下,能量从Tb3+离子传递到Ce3+离子的现象.在过去的一些报导中,能量多是从Ce3+离子传递给Tb3+离子的.这种反过来传递的过程还是不多见的.     

高掺杂Ce3+,Tb3+在正硼酸盐中的发光特性及能量传递

本文利用纳秒技术和一般光谱学技术系统地研究了Ce3+,Tb3+离子在LnBO3(Ln=La,Gd和Y)中的发光特性和能量传递机制.发现在La1-xCexBO3中Ce3+离子的浓度在0.1mol以上才出现明显的浓度猝灭.故对敏化剂Ce3+可以高浓度掺杂.本文对高掺杂下材料的发光特性,Ce3+到Tb3+能量传递的规律和机制进行了系统研究.给出了在正硼酸盐中绿色发光材料的最佳配比.     

一种新型可协调绿色荧光材料BaAl2Si2O8∶Tb3+,Ce3+的发光性质与能量传递

采用高温固相法制备了BaAl2Si2O8∶Tb3+,Ce3+系列的荧光材料,讨论了Tb3+,Ce3+单掺及Tb3+,Ce3+共掺样品的光谱性质及发光机理,分析了Ce3+与Tb3+之间的能量传递过程.通过对样品进行XRD,荧光光谱,色坐标等测试.结果表明,Tb3+,Ce3+的掺杂没有改变BaAl2Si2O8晶体的结构.BaAl2Si2O8∶Tb3+发出明亮的绿光,发光峰分别位于487,545,583和621 nm对应于Tb3+的5D4→7FJ(J=6,5,4,3)特征发射.Ce3+的掺入没有改变BaAl2Si2O8∶Tb3+发射光谱的位置,但使其激发谱由窄带激发变成了宽带激发增加了谱带多样性,发光强度有了明显的增强,而且颜色也具有一定的协调性,使其在实际运用方面具有更大的灵活性.发光强度增强的原因不仅仅是因为Ce3+的敏化作用,还与Ce3+和Tb3+之间存在能量传递有密切关系.通过猝灭法计算了,Ce3+与Tb3+之间的能量传递的临界距离为15.345 nm,并且证明了能量传递是由偶极-偶极相互作用产生的.通过计算得到能量传递效率最高达到了76.04%.     

LaF_3∶Tb~(3+),Ce~(3+)纳米晶的水热合成和荧光特性

采用十六烷基三甲基溴化铵(CTAB)辅助水热法制备了LaF3∶Tb3+,Ce3+纳米晶,研究了pH,Ce3+/Tb3+和反应时间对样品荧光性能的影响。XRD分析表明,样品的主衍射峰与标准卡片(JCPDS 32-0483)的衍射峰相似,属于六方相晶系,其主衍射峰随掺杂稀土离子浓度增大略有偏移,说明掺杂稀土离子与基质晶格中的La3+发生部分的同晶取代。电镜结果显示,样品颗粒是平均晶粒尺寸在20~50nm内且结晶度高的纳米晶体。在样品的激发光谱中,较强的激发峰位于250nm,归属于铈离子能级的4f→5d跃迁。在250nm光激发下,样品均在490nm有较弱的蓝光发射(电偶极跃迁5 D4→7 F6)和543nm有较强的绿光发射(磁偶极跃迁5 D4→7 F5)。随着Ce3+/Tb3+的摩尔比值增大,其荧光强度先增强后减弱,在nCe3+/nTb3+=4时样品的绿光发射最强。溶液pH能影响LaF3∶Tb3+,Ce3+纳米晶的色纯度和发光强度,其中pH为9时样品的绿色纯度最好,而pH为7时其绿光发射最强。增加水热反应时间有助于提高样品的色纯度和增强绿光发射。     

稀土离子(Eu3+,Tb3+,Ce3+)掺杂ZnAl2O4/SiO2微晶玻璃的制备与发光性能

采用凝胶法分别制备出4.5ZnO-5.5Al2 O3-90SiO2 (ZAS)以及ZAS∶ RE3+(RE=Eu,Tb,Ce)透明微晶玻璃.利用X射线衍射仪(XRD)、透射电子显微镜(TEM)和荧光光谱仪(PL)等测试手段,研究了稀土离子掺杂浓度对ZAS微晶玻璃的结构和发光性能的影响.XRD结果表明,ZAS∶ RE3+(RE=Eu,Tb,Ce)微晶玻璃包含ZnAl2 O4晶相和SiO2非晶相,ZnAl2 O4平均晶粒尺寸约为30 nm,稀土离子的掺杂没有显著改变原来的ZnAl2O4晶体结构.TEM结果表明,900℃时ZnAl2O4从ZAS体系中析出.PL光谱显示,Eu3+存在5 D0→7F2跃迁,ZAS∶Eu3+在611 nm处发出强烈的红色光;由于Tb3+的5D4→7E跃迁,ZAS∶ Tb3+在541 nm处发出明亮的绿色光;ZAS∶ Ce3+在381 nm处显示了蓝光发射,对应于Ce3的5d→4f轨道跃迁.ZAS∶RE3+(RE =Eu,Tb,Ce)的PL发射光谱存在着浓度猝灭现象,Eu3+、Tb3+和Ce3+的最佳单掺杂摩尔分数分别为20％、20％和3％.CIE色度图表明,ZAS∶ RE3+(RE=Eu,Tb,Ce)的色坐标分别位于红光、绿光和蓝光区域.实验结果表明,ZAS∶RE3+(RE=Eu,Tb,Ce)微晶玻璃是一种良好的可用于全色显示的白光LED材料.     

新型Sr_3Y(PO_4)_3∶Ce~(3+),Tb~(3+)绿光荧光粉的制备与发光机理的研究

采用传统的高温固相法合成了一种新型的绿色荧光粉Sr3Y(PO4)3∶Ce3+,Tb3+,利用X射线衍射(XRD)和荧光光谱(PL)对该材料的晶体结构和光学性能进行表征。结果分析表明,制得样品的XRD图谱不含Sr3Y(PO4)3以外的杂峰,稀土掺杂并未改变基质的晶体结构,得到的样品为纯相的磷酸钇锶。从本文实验中明显观察到Sr3Y(PO4)3∶Tb3+的激发光谱和Ce3+的发射光谱在320~390nm有重叠,表明在Sr3Y(PO4)3基质中可存在从Ce3+到Tb3+的能量传递。在紫外光(315nm)激发下该荧光粉发射出了Ce3+的蓝光(320~420nm)和Tb3+的黄绿光(480~500nm)和(530~560nm),当Ce3+的浓度为7%,Tb3+的浓度由1%增大到50%时,通过Ce3+的4f→5d电子跃迁将能量传递到Tb3+,然后发生5 D4→7 Fj电子跃迁,该荧光粉发射光谱可由蓝光逐渐调节为黄绿光。本文绘制了Ce3+,Tb3+的能级和Sr3Y(PO4)3∶Ce3+,Tb3+荧光粉中的能量转移过程示意图,并详细阐述了由Ce3+到Tb3+的能量传递过程。通过对比Ce3+和Tb3+的发光强度以及由Ce3+到Tb3+能量转移效率的相对变化,可以得出,随着掺入的Tb3+浓度不断增加,Tb3+的发射强度(5 D4→7 Fj)和能量转移效率(Ce3+到Tb3+)也在增大,而Ce3+的发射强度却有了明显的下降。当Tb3+的浓度为50%时能量转移效率可高达80%。通过CIE色度图也可以看出,当Tb3+浓度不断增大,样品的色坐标从图中的蓝色区域移动到绿色区域。所以在紫外光激发下,Ce3+和Tb3+共掺Sr3Y(PO4)3可作为一种绿光荧光粉应用在白光LED或LCD背光源上。     

不同激发波长下Ce~(3+)-Tb~(3+)-Sm~(3+)共掺白光玻璃的发光性能

本文采用高温熔融技术制备了Ce3+-Tb3+-Sm3+三种离子共掺杂的硼硅酸盐透明玻璃.测试了紫外LED激发下Ce3+离子、Tb3+离子及Sm3+离子单掺与共掺样品的激发光谱及荧光光谱,通过对单掺及共掺样品荧光寿命的测试研究了Ce3+离子、Tb3+离子及Sm3+离子在玻璃基质中的能量传递机理.通过调整紫外LED灯的激发波长调整发光样品所发射光谱的色度坐标、显色指数及色温,得到适合人类生活、学习、工作的白光发光.     

磷酸盐、锗酸盐和碲酸盐玻璃中Ce3+、Tb3+、Er3+和Tm3+离子的发光和敏化作用的研究——Ⅱ.辐射跃迁、无辐射跃迁和能量转移

对不同玻璃基质中的Tb3+、Er3+和Tm3+离子的辐射跃迁和无辐射跃迁速率进行了计算和测量,并讨论了基质玻璃对跃迁特性的影响。研究了Ce3+对Er3+、Tm3+,Tb3+的敏化作用,得出Ce3+对Er3+离子的敏化作用是弱的,而Ce3+对Tm3+和Tb3+是较强的,并对敏化机理进行了讨论。     

Ln(BO_3,PO_4)[Ln=La,Y]基质中Ce~(3+)、Tb~(3+)、Gd~(3+)的光谱

研究了硼磷酸镧和硼磷酸钇基质中Ce3 +、Tb3+、Gd3+的发射光谱和激发光谱。结果表明 :La(BO3,PO4 ) :Ce ,Tb体系中加入钆后 ,Ce3+的发射降低 ,Tb3+的发射增强 ;Y(BO3,PO4 ) :Ce ,Tb体系中加入钆后 ,Ce3+和Tb3 +的发射均增强 ,且前者增加的幅度高于后者。因此在La(BO3,PO4 ) :Ce ,Tb ,Gd体系中Gd3+离子起着能量传递中间体和敏化剂的作用 ;在Y(BO3,PO4 ) :Ce,Tb ,Gd体系中Gd3 +离子只起敏化剂作用 ,并且阻碍Ce3+→Tb3+的能量传递。与Y(BO3,PO4 ) :Ce,Tb ,Gd相比 ,La(BO3,PO4 ) :Ce,Tb ,Gd对紫外吸收强 ,2 5 4nm激发下发出的光绿色纯度高 ,强度大 ,更适合做荧光灯中的绿粉     

CaS:Ce,Tb中Tb3+到Ce3+的能量传递

本文通过发射光谱、激发光谱和发光的衰减特性,研究了三价稀土离子Ce3+和Tb3+在CaS基质中的相互作用。实验结果表明,在CaS中Tb3+敏化了Ce3+的发光,监测Ce3+的发光(505nm),在激发光谱中出现Tb3+中心特征辐射的激发带。而且在CaS:Ce、Tb中,Ce3+中心的发光衰减变慢,衰减后期的慢成份正是反映了能量施主Tb3+的衰减特性,证明在CaS:Ce、Tb中存在着Tb3+到Ce3+的能量传递。     

Fine structure and isotope shift of the 3s4d 3 D-3s3p 3 P, 3s5d 3 D-3s3p 3 P and 3p 2 3 P-3s3p 3 P Transitions of MgI

Summary We report the measurements of the³ D(3s4d)-³ P(3s3p)³ D(3s5d)-³ P(3s3p), and³ P(3p ²)-³ P(3s3p) transition frequency of MgI, the fine-structure separation and isotope shift between²⁴Mg and²⁶Mg. The measurements have been performed in a metastable atomic beam; a good agreement is found for data already existing in the literature. The accuracy of the measurements reported in this paper is mainly limited by the Doppler broadening of theI ₂ transitions used as a reference and by the precision in the knowledge of the related wavelengths.     

LaGaO3:RE3+(RE3+=Eu3+,Ho3+)的光谱

本文用固态反应合成了钙钛矿型的LaGaO3和LaGaO3:RE3+(RE3+=Eu3+,Ho3+)荧光体,并观察了物相随不同的激活离子浓度的变化。测量了化合物在室温下的反射光谱,激发光谱和荧光光谱。研究了Eu3+的D0→7F2和Ho3+的5S2→5I8的荧光强度与激活离子浓度的关系,发现了浓度猝灭,并得到了最大荧光强度的浓度值。     

The gas phase infrared band contours of s-triazine and s-triazine-d3: The fundamentals of C3N3H3 and C3N3D3 and some overtone and combination bands of C3N3H3

The systematic application of band contour techniques to account for most of the observed features of the ir spectra of s-triazine and s-triazine-d₃ have been made as well as a critique as to the limitations of such methods. The experimental and computer methods used to study the gas phase infrared band contours of s-triazine and s-triazine-d₃ are out-lined. Contours of the five E′ fundamentals of s-triazine have been recorded under moderate resolution and analyzed to give the Coriolis constants $\text{ζ}{}_{\mathrm{i}}{}^{\mathrm{z}}$, i = 6–10. The effects of l-resonance are very apparent for ν₈ and ν₉, in the form of holes in the Q branches of these bands. Under the highest resolution available, ν₆ and ν₁₀ also show l-resonance effects. Values of the l-doubling constants $\text{q}{}_{\mathrm{i}}{}^{\mathrm{(+)}}$ were obtained for these four fundamentals. One of the parallel A₂″ fundamentals of C₃H₃N₃ (ν₁₂) has also been studied. It lies close to ν₁₀(E′) and an A × E type of second-order Coriolis resonance may be the cause of the intensity enhancement observed in the inner wings of the ν₁₂ and ν₁₀ bands. Hot bands of the type (ν_i + nν₁₄ ? nν₁₄) have been observed in the contours of ν₈, ν₁₀, and ν₁₂. This is felt to be responsible for the large difference between our observed zeta sum (?1.30) and the theoretical sum (?1.00).The gas phase infrared band contours of the five E′ and 2A₂″ fundamentals of C₃N₃D₃ have also been recorded under moderate resolution. From P-R separations and by computer simulation of the contours, values of the Coriolis constants $\text{ζ}{}_{\mathrm{i}}{}^{\mathrm{z}}$ have been obtained for the E′ modes. The effects of l-resonance have been observed for ν₈(E′) and ν₁₀(E′) and values of the l-doubling constants $\text{q}{}_{\mathrm{i}}{}^{\mathrm{(+)}}$ have been estimated. An extensive series of hot bands of the type (ν₁₂ + nν₁₄ ? nν₁₄) has been observed in the contour of the ν₁₂ (A₂″) fundamental. The mass effect on the Coriolis constants has been discussed.Infrared band contours of the overtone 2ν₇ and seven degenerate E′ combination bands of C₃N₃H₃ have been recorded under moderate resolution. Analysis of these contours using the P-R separation method and computer simulation of the contours has given values of $\text{ζ}{}_{\mathrm{<mtext>eff</mtext>}}{}^{\mathrm{z}}$ for these bands. Fermi resonance between 2ν₇ and ν₆ has been analyzed. The importance of considering both the observed contour as well as the observed frequency when assigning higher tone bands is illustrated.     

Infrared spectra of matrix isolated BH3NH3, BD3ND3, and BH3ND3

The infrared spectra of ammonia-borane, BH₃NH₃, and two of its deuterated isotropic species, BD₃ND₃ and BH₃ND₃, isolated in argon matrix at liquid hydrogen temperature have been measured. Well resolved bands for these three isotopic species have been observed for all the fundamentals. A complete frequency assignment based on C₃v molecular symmetry has been made. A set of force constants have been calculated from the data for the two isotopes BH₃NH₃ and BD₃ND₃ using a valence force field. The agreement between experiment and frequencies calculated from these force constants for the mixed isotopic species, BH₃ND₃, substantiates the present assignment.     

Dielectric investigations of solid solutions SrTiO3-KTaO3 and SrTiO3-KNbO3

The temperature dependences of the dielectric constant and dielectric hysteresis loops in ceramic samples of (1 ? x)SrTiO_3?x KNbO₃ and (1 ? x)SrTiO_3?x KTaO₃ (0 ≤ x ≤ 0.3) solid solutions prepared using different heat treatments have been investigated. Phase diagrams of the studied solid solutions have been constructed in the T-x coordinates. It has been shown that, after quenching of samples (spontaneous cooling at room temperature after long-term heating at the sintering temperature of the ceramic samples), the temperature of the induced phase transition increases because of the weakening of random electric fields associated with nonisovalent impurities due to their “frozen” nonequilibrium redistribution. For small concentrations x, strong dielectric relaxation is observed in the temperature range of 150–250 K. A model of relaxing centers, which is based on the local charge compensation of heterovalent impurities, has been proposed.     

Ba3La(BO3)3基质中Tb3+的光致发光

以高温固相法合成了Ba3La(BO3)3∶Tb3 发光材料。在254nm紫外光激发下,研究了Ba3La(BO3)3∶Tb3 的激发光谱、发射光谱、发光强度与Tb3 浓度的关系。确定了Ba3La(BO3)3基质中Tb3 的自身浓度猝灭机理;探讨了助熔剂LiCO、敏化剂Ce3 、Bi3 的加入对荧光粉的发光强度的影响。     

Terahertz Vibrational Modes in CH3NH3PbI3 and CsPbI3 Perovskite Films

JETP Letters - Films of CH3NH3PbI3 organometallic perovskite, which is currently considered as a promising basic material for new-generation solar cells, as well as films containing CsPbI3...     

Modulated magnetic structures of ErPb3, HoPb3, ErTl3 and HoTl3

Neutron diffraction experiments have been carried out on the magnetically ordered phases of ErPb₃, HoPb₃, ErTl₃ and HoTl₃. The magnetic moments were found to be sinusoidally modulated with a propagation vector of (0, 0.2, 0.5) for the Pb-compounds and (0.38, 0.38, 0.16) for the Tl-compounds.Work supported by the Bundesministerium für Forschung und Technologie     

CH_3NH_3 Formed by Electron Injection at Heterojunction Inducing Peculiar Properties of CH_3NH_3PbI_3 Material

The effect of formed CH_3NH_3 at the heterojunction on properties of CH_3NH_3PbI_3 material is investigated based on experiment and theoretical calculation. Our calculation results show that the giant dielectric constant, anomalous hysteresis and long-lasting polarization for CH_3NH_3PbI_3 originate from the formed CH_3NH_3 at the heterojunction. It is found that the induced weak EPS by the reorientation of CH_3NH_3 sub-group along the built-in electric field enables us to effectively increase the ordering of entire lead-halide framework. In addition, the heterojunction has an advantage of channel separation between carrier transport and electron diffusion. These properties of the heterojunction are the main origin of the high efficiency of CH_3NH_3PbI_3 solar cells.