Chemical–physical behavior of hydrogels of poly(vinyl alcohol) and poly(ethylene glycol)

New hydrogels based on polyethylene glycol (PEG) and poly(vinyl alcohol) (PVA) of different degrees of hydrolysis were synthesized. To form the network the PEG was modified at their ends with acyl chloride groups to be used as the crosslinking agent. The compositions of the hydrogels were between 50% and 90% by weight of PEG and PVA of various degrees of hydrolysis were used. It was found that the degree of hydrolysis of the PVA and the PEG content influence the equilibrium water content of the hydrogel. The process of swelling of all the hydrogels prepared followed a second-order kinetics.     

Solubility of naphthalene in aqueous solutions of poly(ethylene glycol)–poly(propylene glycol)–poly(ethylene glycol) triblock copolymers and (2-hydroxypropyl)cyclodextrins

The solubility of naphthalene was investigated in aqueous solutions of triblock copolymers poly(ethylene glycol)–poly(propylene glycol)–poly(ethylene glycol) (PEG–PPG–PEG) and (2-hydroxypropyl)cyclodextrins. The results with solutions of the individual solubilizers were as expected: the solubility enhancement was much higher with a micelle-forming copolymer than with the non-micellizing one and with (2-hydroxypropyl)--cyclodextrin (HPBCD) than with (2-hydroxypropyl)--cyclodextrin (HPACD). Although the formation of inclusion complexes between HPACD and PEG and between HPBCD and PPG is well established, the naphthalene solubility in mixed solutions does not significantly deviate from that predicted for a mixture of independent solubilizers. Thus the interactions between HPCD and PEG–PPG–PEG copolymers are not strong enough to disrupt micelles and aggregates formed by those copolymers. In fact, slight synergetic deviations were observed with the micellizing copolymer, indicating the existence of ternary naphthalene/HPCD/copolymer interactions. For pharmaceutical applications, it is important that the solubilization efficacy of PEG–PPG–PEG copolymers and that of cyclodextrins modified by the 2-hydroxypropyl group would not be compromised if these two types of solubilizers were co-administered.     

Radiolytically prepared poly(vinyl alcohol) hydrogel containing α-cyclodextrin

α-Cyclodextrin (α-CD) was immobilized by the radiation-induced gelation of poly(vinyl alcohol) (PVA). An aqueous solution of 4-nitrophenol (4-Np) was added upon the PVA hydrogel containing α-CD in a quartz cell. Absorption spectra of the hydrogel phase have demonstrated that 4-Np permeates into the hydrogel and is included by α-CD. When pure toluene was added upon the hydrogel, the rate of the permeation of toluene was affected by the inclusion complexation with α-CD.     

Composite poly(vinyl alcohol)–poly(sulfone) membranes crosslinked by trimesoyl chloride: Characterization and dehydration of ethylene glycol–water mixtures

Composite membranes prepared from poly(vinyl alcohol) and poly(sulfone) were crosslinked with trimesoyl chloride (TMC) solutions. The degree of crosslinking, crystallinity, surface roughness and hydrophobicity of the crosslinked PVA–PSf membranes were determined from attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffraction (XRD), atomic force microscopy (AFM) and contact angle measurements, respectively. Results showed a consistent trend of changes in the physicochemical properties: the degree of crosslinking, crystallinity, surface roughness, hydrophobicity and swelling degree all decrease with increasing crosslinking agent (TMC) concentration and reaction time. The crosslinked membrane performance was assessed with pervaporation dehydration of ethylene glycol solutions at a range of concentrations (30–90 wt% EG) in the feed mixtures. The total flux of permeation was found to decrease, while the selectivity to increase, with increasing TMC concentration and reaction time. The decrease in flux was most prominent at low EG concentrations in the feed mixtures. In addition, the temperature effect on the pervaporation dehydration was investigated in relation to solution–diffusion mechanisms.     

Liquid–liquid phase separation in aqueous solutions of poly(ethylene glycol) methacrylate homopolymers

Here, the liquid–liquid phase separation (LLPS) in aqueous solutions containing poly(ethylene glycol) (PEG) methacrylate homopolymers is reported for the first time. In this study, the thermoresponse of concentrated solutions of DEGMA₆₀ (two ethylene glycol, EG, groups) TEGMA₇₁ (three EG groups), OEGMA300_x (4.5 in average EG groups) of varying molar masses (MM), and OEGMA500₂₈ (nine in average EG groups) is discussed. Interestingly, the temperature of LLPS (T_LLPS) is controlled by the length of the PEG side chain, the MM of the OEGMA300_x and the polymer concentration. More specifically, the transition temperature decreases with: (i) Decrease in the length of the PEG side chain, (ii) increase in MM of the OEGMA300_x, and increase in concentration. In addition, LLPS is also observed in mixtures of OEGMA300_x with Pluronic® F127. In conclusion, these systems present a thermally induced LLPS, with the transition temperature being finely tuned to room temperature when DEGMA is used. These systems find potential use in numerous applications, varying from purification to “water-in-water” emulsions.     

Effects of acrylic acid incorporation on the pressure–temperature behavior and the calorimetric properties of poly(N-isopropylacrylamide) in aqueous solutions

 We studied the effects of pH on the pressure–temperature dependence of coil–collapse transition for aqueous solutions of copolymers of N-isopropylacrylamide and acrylic acid (Ac). At low pressures, the transition temperature (T _tr) increased with pressure, but T _tr decrease with increasing pressure at pressures higher than 50–100 MPa. By increasing the pH, the transition contour shifted to a higher temperature. When the Ac content was increased, the effects of pH became more evident. From a calorimetric study at atmospheric pressure, ΔH _tr was found to become smaller by increasing the portion of the ionized residues in the copolymer. The ratio to the van't Hoff enthalpy changes became larger with an increase in pH, which indicated that the production of charge decreased the cooperative domain size. Received: 19 July 1999 /Accepted in revised form: 7 September 1999     

Electrochemical behavior of C-(60) modified electrode in aqueous solutions

The construction of adsorptive type C60 modified electrode and its electrochemical reduction and oxidation behavior in aqueous solutions are described in this report. Four pairs of one-electron transfer reduction and oxidation cyclic voltammetry is obtained in aqueous solution containing 30% CH3CN and 2% (C2H5)4NOH. It is reported in this paper that the C60 modified electrode also catalyzes the electrochemical reduction of dissolved oxygen in 40% DMF and 2% (C2H5)4NOH aqueous solution and this might open a new field for the potential applications of C60 in electrochemistry and electroaualytical chemistry.     

Transition behaviors and hybrid nanofibers of poly(vinyl alcohol) and polyethylene glycol–POSS telechelic blends

We report solution properties of the blend solutions of poly(vinyl alcohol) (PVA) and poly(ethylene glycol) (PEG)–POSS telechelic and its corresponding hybrid nanofibers prepared by electrospinning. The morphologies, microstructures, and wettability of the resulting PVA/PEG3.4k–POSS hybrid nanofibers are studied. The morphologies of the resultant PVA/PEG3.4k–POSS nanofibers are regular with the fiber diameter ranging from 610 ± 110 to 810 ± 280 nm. When the content of PEG3.4k–POSS telechelic increases above 20 wt.%, the beaded fiber morphologies are observed due to severe aggregations of the PEG3.4k–POSS telechelics as well as increased viscosity at higher concentration. In addition, the solution properties of pure PEG3.4k–POSS telechelic solution (ca. 3–5 wt.%) and PVA/PEG3.4k–POSS solutions blended with PVA are explored, and found to show the reversible turbid-to-transparent transition behavior with respect to the solution temperature. Water contact angle measurement of the PVA/PEG3.4k–POSS nanofiber membranes demonstrates an enhanced hydrophobic nature due to the incorporated POSS moieties.     

Preparation and characterization of microspheres based on blend of poly(lactic acid) and poly(ɛ-caprolactone) with poly(vinyl alcohol) as emulsifier

In this paper, microspheres were prepared by oil-in-water (o/w) emulsion solvent evaporation method. Biodegradable polymer such as blend of poly (lactic acid) (PLA) and poly(?-caprolactone) (PCL) with certain compositions and characteristics was used to prepare the microspheres with poly(vinyl alcohol) (PVA) as an emulsifier. This study observed the microspheres particle’s size distribution at various concentrations of PVA (1%, 1.5%, 2%, and 2.5% PVA). The PVA volume variations effects during the process (50, 100, 150, 200, and 250 mL) were also observed. The blend of PLA and PCL is formed only by physical interaction between them. This can be seen from the FTIR spectrum which shows both PLA and PCL component. The microspheres physical size and appearance were observed by optical microscope (MO). The overall results of this study showed that the formula which used 50–150 mL of 2.5% polyvinyl alcohol produced the microspheres with the most uniform size distribution.     

Synergetic effect of poly(vinyl butyral) and calcium carbonate on thermal stability of poly(vinyl chloride) nanocomposites investigated by TG–FTIR–MS

In order to improve poly(vinyl chloride) (PVC) thermal stability, poly(vinyl butyral) (PVB) matrix and calcium carbonate nanoparticles were incorporated in plasticized PVC. Thermal properties of these composites were investigated by thermogravimetry analysis coupled with mass spectrometry and Fourier transform infrared spectroscopy (FTIR). This approach highlighted the efficiency of both PVB and CaCO₃ as HCl scavengers by postponing both the onset degradation temperature and the HCl release. Moreover, a synergetic effect was evidenced regarding the HCl release. Finally, kinetic parameters of the PVC first degradation stage, determined using the Flynn–Wall–Ozawa’s method, revealed a significant increase of the activation energy by incorporation of CaCO₃ in the presence or not of PVB.     

Effect of block lengths on the association behavior of poly(l-lactic acid)/poly(ethylene glycol) (PLA–PEG–PLA) micelles in aqueous solution

A series of poly(l-lactic acid)/poly(ethylene glycol) triblock copolymers with a PLA–PEG–PLA architecture were synthesized by a ring-opening polymerization (ROP) process. The copolymers were characterized by ¹H NMR and GPC. The total number average molecular weights were in the range of 4,700–50,000, whereas the degrees of polymerization of the PLA and PEG blocks varied from 15 to 359 and from 68 to 136, respectively. The self-association of these copolymers in aqueous environment was studied by emission fluorescence spectroscopy of anilinonaphthalene probe and the critical association concentration (CAC) of the copolymers was measured. It was found that the micellization process of these copolymers was mainly determined by the length of the hydrophobic LA block, while the length of the hydrophilic PEG block had little effect. Furthermore, the low CAC values of the copolymers suggest that the copolymers form stable supramolecular structures in aqueous solutions.     

Electrochemical behavior of NbV–EDTA and NbV–citrate systems in aqueous solutions

The electrochemical reduction of Nb^V using oxalatoniobic acid and ammonium oxooxalatoniobate salts was studied in aqueous solutions of citric acid and sodium ethylenediaminetetraacetate (EDTA), in a wide range of supporting electrolyte concentrations and pH. In EDTA two reduction processes were observed: Nb^V to Nb^IV, E = −1.000 V vs. Ag/AgCl at pH 4.50 and Nb^IV to Nb^IIIE = −1.400 V vs. Ag/AgCl (pH 4.50). In citric acid there was only one reduction process: (Nb^V to Nb^IV), E = −1.260 V vs. Ag/AgCl at pH 4.50. In both electrolytes a linear relationship was found between the diffusion current and the niobium concentration in the 1.0 × 10⁻⁵ to 5.0 × 10⁻³ M range. Using cyclic voltammetry, it waa observed that the charge transfer process in the Nb^V to Nb^IV process is reversible in EDTA and reversible–quasireversible in citric acid.     

Studies on Diels–Alder thermoresponsive networks based on ether–urethane bismaleimide functionalized poly(vinyl alcohol)

Thermoreversible networks obtained by the Diels–Alder cycloaddition reaction of poly(vinyl furfural) with urethane bismaleimides containing polyether chain were synthesized. The formation of the networks was confirmed by attenuated total reflectance in conjunction with Fourier transform infrared spectroscopy (ATR–FTIR). The materials thermal properties were investigated using differential scanning calorimetry (DSC) and a coupling of dynamic thermogravimetry with Fourier transform infrared spectroscopy and mass spectrometry (TG–FTIR–MS) for pyrolysis behaviour under nitrogen atmosphere. A thermal decomposition mechanism of the networks and poly(vinyl furfural) was discussed via evolved gas analysis. The thermoreversibility of the networks was demonstrated by the presence of the endothermic peak characteristic to the retrodienic process on the DSC heating curves and also the appearance of the exothermic peak, due to the dienic process, on the DSC cooling curve. The dynamic contact angle and free surface energy values of the networks were determined. Measures of the heterogeneity and roughness of the surfaces suggested that the surfaces of the networks’ films are more homogenous than the initial poly(vinyl furfural) surface. Dynamic water vapour sorption studies were conducted.     

Why does poly(acrylic acid) addition improve the quality of holograms recorded in dichromated poly(vinyl alcohol)?

Holographic measurements have shown that the addition of 0.5% of poly(acrylic acid) (PAA) can improve the quality of holograms recorded in poly(vinyl alcohol) (PVA) doped with ammonium dichromate (ADC). The purpose of this paper is to explain this improvement. First, an analytical approach investigated the structural and architectural modification of the polymeric matrix and the fate of the various chromium species within PVA/PAA/ADC films. The addition of PAA in dichromated PVA led to a pre-reticulation of the polymeric matrix. This process increased with the amount of PAA.Second, an analytical approach focused on the evolution of PVA/PAA/ADC films upon irradiation at 365 nm, which is representative of hologram formation. The improvement brought by the presence of 0.5% of PAA in PVA/ADC was assigned to an additional source of crosslinking through the formation of covalent bonds. This process paralleled the crosslinking through coordination bonds involving Cr(V) and PVA units. At 0.5% of PAA, the mobility of the medium before exposure was sufficient to allow the migration of the species involved in the reticulation process during hologram formation, whereas higher concentrations of PAA inhibited this migration.     

Effect of poly(amid–imide)/Al2O3 hybrid with various ratios on the physicochemical properties of poly(vinyl alcohol) nanocomposites films

To study the effect of the various ratios of poly(amide–imide)/Al₂O₃ nanocomposites (PANC)s on the mechanical and thermal properties of nanocomposites films, poly(vinyl alcohol) (PVA)/PANCs based on various ratios of 2, 4, and 6 wt% were prepared and characterized. In the first step, the surface of alumina nanoparticles was treated with 15 wt% of biosafe diacid and consequently, about 10 wt% of these modified nanoparticles were loaded into the poly(amide–imide) matrix. Then, various contents of the obtained PANCs were incorporated into a PVA solution using a sonochemical treatment. The effects of PANC on the structure and morphology of PVA matrix were studied using powder X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, atomic force microscopy (AFM), and thermal gravimetric analysis (TGA). The results show that the tensile strength and decomposition temperature were improved as the portion of PANC into PVA matrix are increased from 2 to 6 wt%. Also, AFM pictures of the fracture surfaces of PVA/PANCs showed a significantly rougher surface than the neat PVA.     

Optical,mechanical, and thermal behavior of poly(vinyl alcohol) composite films embedded with biosafe and optically active poly(amide–imide)-ZnO quantum dot nanocomposite as a novel reinforcement

Poly(vinyl alcohol) (PVA), a polyhydroxy polymer, is the synthetic resin produced in the world due to the physical properties and complete biodegradability. This work tries to introduce novel reinforcement for PVA to improve properties without effect on its biocompatibility. The present investigation deals with the fabrication of new PVA/poly(amide–imide)-zinc oxide nanocomposites (PVA/PAI–ZnO NCs) with different PAI–ZnO loading by using ultrasound irradiation. At first, the surface of ZnO nanoparticles (NPs) was modified by biosafe diacid for the better dispersion of NPs and increasing possible interactions between NPs and PAI. Then, PAI–ZnO was used as filler in the PVA matrix. Surface morphology results were amazing. The TEM images and related histograms show a noticeable size decreasing of ZnO NPs from about 31 to 3 nm after preparation of NCs. Other analyses showed that the reinforcement of PAI–ZnO NC into the PVA matrix enhances mechanical and thermal properties of the PVA composites.     

Preparation and properties of poly(vinyl alcohol)/exfoliated α-zirconium phosphate nanocomposite films

In this work, poly(vinylalcohol)(PVA)/exfoliated α-zirconium phosphate(e-α-ZrP) nanocomposites of various compositions were created by a solution casting method. The α-ZrP compound was synthesized by refluxing. The characteristic properties of the PVA/e-α-ZrP composite films were examined by thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM) and tensile tests. Tensile tests indicated that with the loading of e-α-ZrP, the tensile strength and the elongation at break were increased by 17.3% and 26.6% compared to neat PVA, respectively. It is noteworthy that optimum film properties were obtained with 0.8 wt% e-α-ZrP, and higher proportions of e-α-ZrP, may be related to the aggregation of e-α-ZrP particles and deterioration of the film properties. On the whole, the nanocomposite PVA/e-α-ZrP systems had mechanical and thermal properties which were superior to that of the neat polymer and its conventionally filled composites.     

Adsorption of thorium(IV) from aqueous solutions by poly(cyclotriphosphazene-co-4,4′-diaminodiphenyl ether) microspheres

Journal of Radioanalytical and Nuclear Chemistry - Poly(cyclotriphosphazene-co-4,4′-diaminodiphenyl ether) microspheres (PZA) was based on hexachlorocyclotriphosphazene (HCCP) and...