隔水管弯曲对钻柱振动影响的计算与分析

海洋油气资源钻探中隔水管的弯曲对钻柱振动以及钻进特性有特别的影响。为得到隔水管弯曲对钻柱振动的影响规律,对南海已钻深水井使用非线性有限元软件建立全井钻井数值计算模型,研究获得了不同垂深时隔水管弯曲对钻柱振动特性的影响规律。研究表明:隔水管弯曲会加剧钻柱的振动,钻柱振动加剧会导致钻井能耗上升、钻头切削能力下降并且会加快钻柱疲劳;当隔水管的弯曲达到某临界值,钻柱与隔水管间的接触力会陡增;井口的钩载越大,隔水管弯曲带来的井口钩载波动量越大;井越深,隔水管弯曲对全井钻柱最大弯矩和钻头切削能力的影响越小。     

Establishing the Fundamentals of the Theory of Stability of Mine Workings

The fundamentals of the theory of stability of mine workings are analyzed. The theory is based on the linearized three-dimensional theory of stability of deformable bodies. Some results on horizontal and vertical mine workings and on underground closed cavities are analyzed     

大型机械式挖掘机铲斗设计技术研究

根据引进产品P＆H2300XP挖掘机的现场实测数据,对其铲斗进行了大量的数据分析研究。在分析过程中,合理确定铲斗边界约束及斗齿处计算载荷是铲斗计算分析的难点。文章运用力的线性叠加原理成功地解决了这一问题,分析了铲斗各部分的结构性能,并讨论了载荷对铲斗分析的影响。     

界面特性对短纤维金属基复合材料蠕变行为的影响

基于短纤维增强金属基复合材料(MMC)的单纤维三维模型(三相)，利用粘弹性有限元分析方法对影响金属基复合材料的蠕变行为的因素进行了较为系统的分析。研究中主要讨论了界面特性和纤维取向角对金属基复合材料的蠕变性能的影响。研究结果发现，界面特性诸如厚度、模量和应力指数都对纤维最大轴应力和稳定蠕变率产生影响：稳态蠕变率随界面模量的增大而逐渐减小，当高于基体模量时基本保持不变；纤维轴应力的变化与蠕变率正好相反。稳态蠕变率随界面厚度、应力指数的增加而增大；而轴应力则随之减小。同时不同的纤维取向也影响金属基复合材料蠕变时的轴应力分布和稳态蠕变率。     

气动载荷压心变化对机翼结构重量的影响

借助PATRAN、NASTRAN有限元分析工具,着重研究机翼结构重量因气动载荷压心变化而产生的影响。气动载荷的压心变化通过在飞机巡航状态中某一个载荷情况下真实的气动载荷基础上叠加一个微小量的分布载荷来实现,保证新得到的气动载荷与原始的气动载荷总载保持一致,从而使得气动载荷的压心位置发生变化。通过理论分析和简单的有限元分析验证,得到了气动载荷压心变化下机翼蒙皮、长桁等单元的应力分布和增长规律,进而得到气动载荷压心变化与机翼结构增重之间的函数关系:气动载荷压心向翼尖方向移动1%,机翼结构重量增重2.46%。该结论可以为其他型号的民机机翼设计提供参考依据。     

半圆柱壳挠曲问题解析解精确性的研究

壳体力学已于上世纪由多位专家发展成熟,其中简支柱壳挠曲问题采用改进莱维解法的三角级数法解出,但是其解法复杂,手算难以完成．为讨论其结果的精确性,通过编写运行基于MATLAB的运算程序导出实例化解析解,与基于力学基本理论的推想假设对比,再引入有限元计算结果进行比较研究．最终发现,理论解析解应力和位移具有分布形式大致准确性,但仍存在不容忽视的细节与局部性问题．研究表明,理论解法工程意义有限,结果尚需改进．     

Effect of the thermophysical properties of the liquid on the rupture of a film under a thermal load. Role of the Prandtl number

The rupture of freely hanging liquid films depending on the Prandtl number is considered. The process is studied using a mathematical model based on two-dimensional Navier-Stokes equations which describes the motion of a thin layer of a nonisothermal viscous liquid in microgravity. It is shown that if the temperature on the entire free surface is given in advance, the lifetime of the film, the character of the rupture, and the position of the free surface, with the set of forces taken into account in the model, do not depend on the Prandtl number. If temperature is specified only in some region of the free surface, and on the rest of the surface, it is to be determined in the process of solving the problem, the Prandtl number plays an important role. Results of solution of model problems are presented.     

液滴撞击超疏水壁面反弹及破碎行为研究

液滴撞击壁面时,壁面亲水性对液滴撞击壁面后的变化历程具有重要的影响。利用相界面追踪的复合Level Set-VOF方法对液滴撞击超疏水壁面的运动进行了研究。研究结果表明,撞击速度较小时,液滴撞壁后发生反弹;撞击速度较大时,液滴撞壁后会发生破碎现象;初始粒径的增大和表面张力的减小,有利于液滴撞壁后产生铺展破碎现象;撞击角度对撞壁后的液滴行为具有较大的影响。通过数值模拟,给出了一定条件下液滴垂直及倾斜撞击超疏水壁面反弹及破碎的临界条件。     

气泡夹带对壁面油膜流动特性的影响

油-气润滑系统工作过程中,润滑油膜受微油滴冲击和压缩空气扰动影响易形成气泡夹带现象,气泡夹带行为将对壁面润滑油膜层的形成及流动过程产生重要影响。基于VOF数值模拟方法,对含气泡油膜沿倾斜壁面的流动行为进行研究,考察了气泡的存在对油膜形态和流动速度的影响规律,以及气泡破裂阶段空腔邻域内流体压力变化特性。研究表明,油膜夹带气泡的形变和迁移诱发气泡周围微流场的速度扰动现象,导致气液界面处产生非均匀速度梯度分布,进而引发油膜表面的形态波动。气泡发生破裂时,油膜空穴部位发生明显的正负压力波动现象,气泡附近壁面将承受一定的交变载荷作用。     

Effect of frequency of air flow on the performance of the Wells turbine

Experimental investigations on the effect of Strouhal number and rotor solidity on the performance of 0.2m diameter Wells self rectifying air turbine with NACA 0021 profile blades are presented. The results show an increase in starting torque with the Strouhal number of airflow and rotor solidity. The effect of Strouhal number on the running performance of the turbine is solidity dependent     

Effects of the dilatancy of joints and of the size of the building blocks on the mechanical behavior of masonry structures

The effect of the dilatancy of masonry interfaces and of the size of the building blocks on the strength of masonry structures is quantified herein. The study focuses mainly on out-of-plane loadings, which can appear due to various factors such as wind, earthquakes or explosions. The analysis is performed using the Discrete Element Method (DEM), which allows to access directly various micro-mechanical parameters, such as the joints dilatancy angle and the size of the building blocks. Detailed DEM numerical models of existing experimental configurations are presented. The numerical results are first compared and validated towards the experimental observations and then they are used to derive qualitative and quantitative conclusions regarding the effects of joints dilatancy and blocks size. It is shown that dilatancy plays an important role on the overall strength of masonry even under low confinement. The size of the blocks is also an important parameter that needs to be considered in the modeling of masonry structures.     

Generalization of the Prandtl solution to the case of axisymmetric deformation of materials obeying the double shear model

A semianalytic solution of the problem on the compression of an annular layer of a plastic material obeying the double shear model on a cylindrical mandrel is obtained. The approximate statement of boundary conditions, which cannot be satisfied exactly in the framework of the constructed solution, is based on the same assumptions as the statement of the classical plasticity problem of compression of a material layer between rough plates (Prandtl’s problem). It is assumed that the maximum friction law is satisfied on the inner surface of the layer. The solution is singular near this surface. The strain rate intensity factor is calculated, and its dependence on the process and material parameters is shown.     

On the theory of the vibropump

The problem of vibratory lifting of a fluid was considered in [1] on the assumption of incompressibility of the pump tubing. In the present paper account is taken of the elasticity of the tubing materal. This leads to the consideration of forced oscillation regimes in two elastic media coupled by nonlinear conditions on one of the boundaries. In this case there is an ambiguity in the relations between the unknowns and governing quantities which leads to a hysteresis effect.     

On the Global Geometric Structure of the Dynamics of the Elastic Pendulum

We approach the planar elastic pendulum as a singular perturbation of the pendulum to show that its dynamics are governed by global two-dimensional invariant manifolds of motion. One of the manifolds is nonlinear and carries purely slow periodic oscillations. The other one, on the other hand, is linear and carries purely fast radial oscillations. For sufficiently small coupling between the angular and radial degrees of freedom, both manifolds are global and orbitally stable up to energy levels exceeding that of the unstable equilibrium of the system. For fixed value of coupling, the fast invariant manifold bifurcates transversely to create unstable radial oscillations exhibiting energy transfer. Poincaré sections of iso-energetic manifolds reveal that only motions on and near a separatrix emanating from the unstable region of the fast invariant manifold exhibit energy transfer.     

土-基础相互作用隔震体系地震随机响应分析

视地基土为各向同性的弹性半空间,用弹簧-粘性阻尼器模拟土对结构的影响,将地震激励模拟为平稳随机过程,对基础隔震体系的随机响应进行了分析。分析结果表明,地基土的性质对隔震结构有直接影响,但其影响比非隔震结构小得多。     

Lag of the front of the polymer behind the carrier liquid with the filtration of a polymer through a porous medium

The fact of the lag of the front of a polymer solution behind the carrying water has been established experimentally. A study has been made of the dependence of the size of this zone on the length of a linear homogeneous porous sample, on the volume of the liquid pumped through it, and on the gradients of the thermodynamic pressure.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 149–151, July–August, 1976.     

Hydraulic modeling of the flow in the delta of the River Neva and in the eastern part of the Gulf of Finland

In connection with the construction of Leningrad's flood defenses the flow in the mouth of River Neva has been investigated on hydraulic models of different scales both unpressurized (see, for example, [1, 2]) and pressurized (see, for example, [3]). Since the results of these investigations are being intensively debated in connection with the discussion of the effect of defensive structures on the ecology of the Leningrad region, it is important to analyze the scientific basis for the hydraulic modeling of such flows.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 57–65, September–October, 1990.     

气体速度对液膜在预膜板表面流动形态影响的LBM模拟

为了探究气流剪切作用对航空燃油在气动雾化喷嘴预膜板上流动形态的影响,首先对基于相场理论的两相流格子Boltzmann模型进行修正,并通过经典算例验证了修正后模型的准确性和可靠性.随后利用该模型模拟了同向气流驱动下液膜在水平预膜板表面上的流动,分析了气流速度对液膜流动形态的影响规律.研究表明,该模型可准确追踪具有大密度比...     

Effect of the Streamwise Component of the Vorticity Formed in a Turbulent Jet Source on the Acoustic Characteristics of the Jet

The results of an experimental study of the effects of different nozzle heads on turbulent jet noise are analyzed. A configuration of four cylindrical heads, tabbed heads, and chevron nozzles are considered and the decreases in the acoustic-mechanical efficiency of the jet (acoustic power reduction) for jets exposed to different modes of action are compared.It is shown that the effects of tabbed and cylindrical heads, as well as of chevrons, share a common property which is associated with the occurrence of vorticity in the jet source and can be described on the basis of a unified criterion characterizing the action on both the jet flow structure and the jet noise.     

掺气分流墩墩头的动水压强特性研究

对掺气分流墩墩头的动水压强特性进行了试验研究,以求了解墩头的抗空蚀性能及动水压强特性。试验结果得出：时均压强P／Pman沿墩高和Cp沿横断面的分布规律;墩头轴线与来流有夹角时Cp沿横断面的分布规律;墩头壁压脉动压强特性,在墩后充分供气时,墩头的空化特性。