首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到18条相似文献,搜索用时 140 毫秒
1.
表面修饰的Q态纳米CdS的荧光性能研究   总被引:6,自引:0,他引:6  
纪欣  章伟光  范军  钟昀  闫云辉 《化学学报》2004,62(16):1514-1518
以硫醇为表面修饰剂,通过控制硫醇与Cd2+的比例,得到性能稳定的Q-CdS,而后将Q-CdS与聚合物通过共混复合成膜.通过荧光光谱研究了硫醇和聚合物对Q-CdS的表面修饰作用,研究发现硫醇的长碳链有效阻止了CdS粒子间的团聚,碳链的增加导致Q-CdS稳定性的增强,Q-CdS的激子发射峰强度增大,且这种表面修饰效应随硫醇加入量的增大而增强,在一定硫醇加入量时的激子荧光发射强度达到最大.由于介电局域效应,聚合物的加入使Q-CdS的表面态荧光发光强度呈数量级增大.另一方面,随着聚合物加入量的增加又会导致Q-CdS的表面钝化,缺陷减小,表面态荧光发射峰相对减弱,而激子发射峰却增强.  相似文献   

2.
采用反相微乳法在庚烷/琥珀酸二异辛酯磺酸钠(AOT)/水体系中成功制备出纳米CdS/聚乙烯咔唑(PVK)复合材料。通过紫外-可见光谱(UV-Vis)、X射线衍射(XRD)、透射电子显微镜(TEM)、荧光光谱(PL)对复合材料进行了结构表征和形貌观察。结果表明,UV-Vis光谱吸收峰在325 nm和360 nm,表现出纳米粒子明显的量子尺寸效应;TEM照片显示纳米CdS粒径分布较窄,均匀分散在PVK中。XRD分析表明,CdS纳米颗粒已经形成。PL结果显示:产物的荧光发射光谱峰波长在375 nm和520 nm。  相似文献   

3.
选用水解的十八碳烯-马来酸酐共聚物(PMAO)为表面修饰分子,发展了一种以疏水纳米粒子吸附表面活性剂十二烷基磺酸钠(Na YF_4-SDS)为中间体的均一液相聚合物包覆纳米粒子方法.该方法解决了油溶性纳米晶与弱极性聚合物分子难以在单一体系下均匀分散的问题,实现了在均一液相体系下对疏水纳米晶的单分散包覆以及表面羧酸官能团修饰.红外光谱与表面Zeta电位测试结果表明纳米晶已被聚合物包覆,粒子表面为强电负性的羧酸基团.电镜结果表明聚合物包覆的上转换纳米晶粒径无明显的变化,具有良好的单分散性.发射光谱表明聚合物包覆前后粒子的发射谱带无显著变化,保持了原油相粒子的发光性能.进一步的特异性识别荧光显微成像实验证实聚合物包覆后的粒子(Na YF_4-PMAO)可用于生物学检测.  相似文献   

4.
Q-CdS/聚合物纳米复合膜的制备与荧光性能   总被引:3,自引:0,他引:3  
采用配位化学合成原理 ,分离制备出颗粒尺寸小于 10nm的单分散性的Q态CdS(Q CdS)纳米粒子 ,将Q CdS纳米粒子与聚合物复合成膜 ,制备出一系列Q CdS 聚合物纳米复合膜 .用紫外可见吸收光谱与透射电镜研究了纳米复合膜的量子尺寸效应和分散性 .通过荧光光谱探讨了不同聚合物基体材料和不同Q CdS含量的纳米复合膜的荧光发光性能 .结果表明 ,一方面这种以聚合物为基体的纳米复合膜 ,由于聚合物与Q CdS之间的相互作用 ,使纳米复合膜表现出与单一相组分完全不同的特征荧光发射峰 ;另一方面 ,随着纳米复合膜中Q CdS含量的不断增大 ,纳米复合膜的荧光强度不断增强 ,在一定浓度时达到最大值 .  相似文献   

5.
纳米银与基体P(AMPS-MMA)的相互作用研究   总被引:4,自引:0,他引:4  
在无引发剂和还原剂的条件下超声辐射双原位合成出纳米银/2-丙烯酰氨基-2-甲基丙磺酸与甲基丙烯酸甲酯共聚物[P(AMPS-MMA)]复合物.TEM表明,纳米银粒子的粒径5~15nm,均匀地分散在聚合物基体中;UV-Vis表明,超声时间影响纳米银的粒径大小及粒径分布;FT-IR、UV-Vis和荧光光谱表明纳米银与基体P(AMPS-MMA)之间存在一定的化学作用力;XPS证明了纳米银与基体P(AMPS-MMA)的作用力为纳米银与聚合物中酯基氧原子之间通过配位作用形成的化学作用力.  相似文献   

6.
无皂高分子胶乳粒子的组成、单分散性和稳定性   总被引:1,自引:0,他引:1  
分别用控压微波辐照法、常压微波辐照法和常压水浴合成法制备出无皂聚苯乙烯胶乳粒子.运用静态激光光散射和动态激光光散射对粒子的表观分子量及其粒径大小与分布进行了表征.结果表明,微波辐照加热法对于形成小尺寸、单分散的胶乳粒子起着很重要的作用.通过凝胶渗透色谱仪(GPC)测定聚合产物的分子量,并结合Zimm作图法,计算出胶乳粒子所含高分子链的数目.发现由控压微波辐照法所得到的聚苯乙烯胶乳粒子的表观分子量最大,而且粒子的分散性并不是由聚合物高分子链的分散性直接决定的.在微波辐照下的无皂乳液聚合,虽然聚合物的高分子链大小不一,但它们在乳液中缠结在一起而形成的胶乳粒子却具有单分散性.通过对均聚和共聚乳液进行静置考察,发现无皂高分子胶乳粒子的稳定性与制备方法、共聚单体的结构及性质有着密切的关系.  相似文献   

7.
分别引入辛基硫醇作配体, 十六烷基三甲基溴化铵(或四丁基溴化铵)作有机正离子合成CdS纳米簇合物. 采用后沉淀分离技术, 分别制备得到粒度分布窄、粒径2~5 nm的Q态CdS纳米晶粒. 用紫外吸收光谱、透射电子显微镜、小角X射线衍射来测定粒径的大小. 在紫外光谱、荧光光谱和X射线衍射上, 表现出明显的量子尺寸效应. 当粒径大到一定程度(大于10 nm)时, 量子尺寸效应就不明显. 用ESR研究Q态纳米粒子的光催化性能, 结果表明加入纳米硫化镉颗粒可明显促使甲醇、乙醇发生光催化反应, 释放出CH3-·CHOH(对乙醇体系)或·CH2OH(对甲醇体系), 在有机合成上有着重要的应用价值.  相似文献   

8.
聚硅氧烷/丙烯酸酯核/壳复合胶乳的粒径分布与成核机理   总被引:12,自引:0,他引:12  
通过种子乳液法合成出具有高有机硅含量核 壳结构的聚硅氧烷 丙烯酸酯复合粒子 .研究了聚合方法、乳化剂浓度、引发剂浓度、单体滴加速度等工艺条件对复合乳液粒径尺寸、分布与形态的影响 ,并对复合乳液的成核机理进行了探讨 .研究表明 ,乳化剂浓度对乳液粒子的粒径分布和形态、结构有显著影响 ,引发剂浓度增加将使粒子粒径减小 ;相对一次投料法 ,种子乳液法生成的粒子分布窄 ,具有明显核壳结构 ,通过壳层单体滴加速度可以控制粒子的粒径尺寸和分布 ;而壳层丙烯酸酯聚合物主要是在聚硅氧烷种子表面的“过渡层”聚合、富集而成 .  相似文献   

9.
分散聚合法制备液相芯片聚苯乙烯磁性复合微球的研究   总被引:1,自引:0,他引:1  
本文将丙烯酸基磁流体均匀分散到苯乙烯单体中,采用分散聚合法制备出了适于构建液相芯片微球载体的单分散性微米级磁性微球.考察了丙烯酸基磁流体预处理时间、加料顺序和单体量对微球形貌和粒径分布的影响及其条件优化.扫描电镜(SEM)显示磁性微球平均粒径为7.77 μm,具有良好的单分散性(多分散指数PDI为1.03),并且表面光滑致密;用超导量子干涉磁强计测量了Fe3O4纳米粒子的磁化曲线;用红外光谱(FT-IR)和热失重(TG)方法表征了磁性微球的化学结构及Fe3O4含量.  相似文献   

10.
以天然壳聚糖为功能性高分子的骨架,通过西弗碱还原法,以正辛醛和端醛基聚乙二醇单甲基醚(mPEG aldehyde,mPEG-ald)修饰壳聚糖,制备了具有亲疏水性质的N-辛基化-N-mPEG化壳聚糖衍生物(N-octyl-N-mPEG-chitosan,OPEGC),并且以此两亲性壳聚糖衍生物包覆量子点制备了水溶性聚合物量子点纳米粒子.用FTIR、1H-NMR对壳聚糖衍生物进行了结构表征.制备的水溶性胶束,用动态光散射(DLS)测试其流体力学直径与分布,研究了烷基链接枝比率对粒径大小的影响,研究结果表明:烷基链接枝率越高,聚合物胶束粒径越小.以芘为分子探针,通过荧光光谱法测定了壳聚糖衍生物的临界胶束浓度(CMC)为2.032×10-2mg/mL,并对水溶性聚合物量子点纳米粒子进行了紫外、荧光及形貌表征,结果表明得到了荧光发射产率高的聚合物量子点纳米粒子,且尺寸均一、水溶性好.  相似文献   

11.
We measured the size changes of cross-linked polymer microspheres of narrow size distribution with different cross-linking densities by the in situ swelling method. The swelling behavior of these cross-linked polymer microspheres revealed that their maximal swelling degree linearly decreased as a function of the cross-linker content from 6.65 at 1.36 mol% to 2.43 at 3.25 mol%. By means of UV-vis spectra, we observed the spectral changes of the latex crystal films composed of these cross-linked polymer microspheres when we filled the interstices of the latex crystal films with different fluid media. Some succeeding peak shifts were observed, which may have resulted from the movement or the swelling of the polymer microspheres in the latex crystals.  相似文献   

12.
We report in here the preparation of CdS nanoparticles (Q-CdS) in N,N-dimethylformamide (DMF) and poly(tetrafluoroethylene-co-vinylidenefluoride-co-propylene) (PTFE-co-PVDF-co-Prop) by reaction of cadmium acetate and thiourea at room temperature. The formation and size evolution of Q-CdS particles were followed by optical absorption spectroscopy as a function of the aging process of the solutions. The obtained results indicated that not only the Q-CdS particles were more stable in DMF than in aqueous solutions, probably due to the interaction with the CHNO group, but also they were formed in smaller sizes. The particle size obtained in DMF was estimated in 4-6 nm against 10-20 nm in aqueous solution. The results also showed that the velocity of Q-CdS formation is lower when the reaction was carried out in PTFE-co-PVDF-co-Prop dissolved in DMF. The Q-CdS particles formed in this system were also less stable than in pure DMF, probably due to the interaction of the CHNO fragment and CF2 of polymer chain or phase segregation.  相似文献   

13.
The specific features of luminescence of colloidal solutions of Q-CdS with particles of different size and the regularities of luminescence quenching by quenchers of various nature were studied. The luminescence spectra of Q-CdS consist of several bands, which are shifted to the long-ware region as the particle size increases. The dependence of the integral quantum yield of luminescence on the particle size has a sharp maximum at a particle diameter of ?23Å. A Stem—Volmer-type equation including the adsorption isotherm of the quencher molecules on the surface of the Q-CdS colloidal particles was used to describe the regularities of luminescence quenching of Q-CdS colloidal solutions. The CdS particle size was found to affect the efficiency of luminescence quenching. The regularities of luminescence quenching depend both on the rate constant of electron transfer to the quencher molecules and on the ability of the quencher molecules to be adsorbed on the surface of the CdS colloidal particle.  相似文献   

14.
A series of silver colloidal dispersions were prepared by two protocols, i.e., addition of the reductant-NaBH(4) and the stabilizer-thiosalicylic acid (TSA) into Ag(+) solution simultaneously or successively. The products were compared and characterized by TEM, electrochemical measurements, XPS, UV-vis, and FT-IR spectra. The size distributions of the Ag nanoparticles prepared by the former and latter protocols are bimodal and monodisperse, respectively. The analytic results of UV-vis spectra coincide with the TEM observation. A tentative explanation was given to the relationship between particle sizes and different synthetic protocols. The changes of the reduction potential of the reductant invoked a variance in particle diameter and size distribution. Electrochemical measurements corroborated our assumption. The composition information of TSA-derived silver nanoparticles was obtained from XPS and FT-IR spectroscopic measurements.  相似文献   

15.
采用半连续种子乳液聚合法,以甲基丙烯酸(MAA)为壳层亲水功能单体,合成了丙烯酸酯原乳液,并通过喷雾干燥法制得具有可再分散性的聚合物乳胶粉.讨论了原乳液粒子粒径随pH值和MAA量的变化关系;重点研究了MAA量对乳胶粉水分散液稳定性、再分散乳液zeta电位、乳胶粒粒径分布及乳胶粉内部微观形貌的影响,并分析其作用机理.研究结果表明:原乳液粒子粒径随pH值的增大逐渐增大,且MAA含量越高,粒径增幅越大;随MAA量增加,再分散液稳定性增强,zeta电位绝对值增大,平均粒径逐渐变小,乳胶粉再分散性显著改善.透射电子显微镜(TEM)结果显示:当MAA含量较高时,乳胶粉内部出现较大孔径的中空微孔结构.中空微孔结构提供水分向乳胶粉内部扩散通道,因而优化其水分散性,再分散乳液的"绒毛结构"与较高的zeta电位赋予其优异的分散稳定性.  相似文献   

16.
后重氮偶合法制备咔唑类光折变聚合物   总被引:2,自引:0,他引:2  
生色团;后重氮偶合法制备咔唑类光折变聚合物  相似文献   

17.
AB diblock copolymers of poly(2-(dimethylamino)ethyl metharylate-block-potassiurn acrylate) were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. The structure of the block polymer was determined by the nuclear magnetic resonance (NMR) spectroscopy and the gel permeation chromatography. Moreover, it has also been shown that the diblock copolymers exhibit aggregate as function of the pH according to the result of 1H-NMR spectroscopy, FT-IR absorption spectra, UV-vis transmittance spectroscopy, transmission electron microscopy and ultrasonic particle size analyzer. The result was attributed that such AB diblock copolymers were tailored to undergo pH-induced self-assembly. Furthermore, the aggregate can be as template of metal nanoparticles preparation, and the sizes of the aggregate, in turn, strongly control nanoparticle sizes.  相似文献   

18.
Summary: Layered double hydroxide (LDH) is a relatively new class of layered crystalline clay materials to be used as nanofiller in various polymer matrices. We report here the organic modification of LDH by anionic surfactants having different sizes and functionalities. Subsequently, their dispersion in polymer is discussed and finally the characteristics of the polymer/LDH nanocomposites are investigated. LDH has been modified using regeneration method, which shows that irrespective of size and functionality of the anionic surfactant, organic modification can be carried out efficiently. However, it has been observed that alkyl sulfonate are more efficiently intercalated within LDH layers than other surfactants giving well defined crystal structure of the modified LDH. These modified LDH, when dispersed in polymers like maleic anhydride grafted polyethylene shows that not only the size of the surfactant, but also the functionality of the surfactant influences their dispersion in a non polar polymer matrix.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号