热塑性/热固性聚合物共混体系研究——乙炔端基砜/聚砜共混物的动态固化动力学

The dynamic cure kinetics of thermosetting acetylene-terminated sulfone (ATS) and two blends prepared by the ATS and thermoplastic bisphenol A polysulfone (PSF), polyary-lethersulfone with cardo group (PES-C) were determinated by differential scanning calori-metry (DSC). The addition of polysulfone's resin increases the temperature of initial reaction and decreases the activation energy of cure reaction(E), pre-exponnential factor (LnA), and heat of cure reaction (AH). The temperature of reaction peak and final reaction and the reaction order(n) have been no effect.     

热塑性/热固性聚合物共混体系研究——乙炔端基砜/聚砜共混物的动态固化动力学

近年来,半互穿聚合物网络(SIPN)概念被用来研制能结合热塑性聚合物的加工性和热固性聚合物的高温性能的大分子体系,用于复合材料耐高温树脂基体。例如:乙炔端基酰亚胺低聚物与热塑性聚酰亚胺基SIPN,线性聚酰亚胺与热固性双马来酰亚胺基SIPN以及热塑性树脂与双腈基SIPN已有报道。研究结果表明共混物起到协同作用,易于加工并具有优异的性能。乙炔端基砜(ATS)树脂具有与聚砜树脂相类似的结构,被认为在将来代替环氧用于高性能粘合剂和复合材料树脂基体的候选者之一。其另     

ClONO2与Cl(2P3/2)的反应机理

在密度泛函理论B3LYP/6-31G^*水平上,研究了ClONO₂+Cl(²P_3/2)Cl₂+NO₃和ClONO₂+Cl(²P_3/2)ClO+ClONO(cis)及ClONO₂+Cl(²P_3/2)ClOCl+NO₂的反应机理.计算得到各可能反应途径的过渡态,并经过内禀反应坐标(IRC)分析加以证实.反应ClONO₂+Cl(²P_3/2)Cl₂+NO₃反应活化能垒最低,为4.5kJ/mol,是反应主通道.     

Impact of water on the OH + HOCl reaction

The effect of a single water molecule on the OH + HOCl reaction has been investigated. The naked reaction, the reaction without water, has two elementary reaction paths, depending on how the hydroxyl radical approaches the HOCl molecule. In both cases, the reaction begins with the formation of prereactive hydrogen bond complexes before the abstraction of the hydrogen by the hydroxyl radical. When water is added, the products of the reaction do not change, and the reaction becomes quite complex yielding six different reaction paths. Interestingly, a geometrical rearrangement occurs in the prereactive hydrogen bonded region, which prepares the HOCl moiety to react with the hydroxyl radical. The rate constant for the reaction without water is computed to be 2.2 × 10(-13) cm(3) molecule(-1) s(-1) at room temperature, which is in good agreement with experimental values. The reaction between ClOH···H(2)O and OH is estimated to be slower than the naked reaction by 4-5 orders of magnitude. Although, the reaction between ClOH and the H(2)O···HO complex is also predicted to be slower, it is up to 2.2 times faster than the naked reaction at altitudes below 6 km. Another intriguing finding of this work is an interesting three-body interchange reaction that can occur, that is HOCl + HO···H(2)O → HOCl···H(2)O + OH.     

Heterogeneous Suzuki and copper-free Sonogashira cross-coupling reactions catalyzed by a reusable palladium(II) complex in water medium

A new polystyrene anchored Pd(II) azo complex has been synthesized and characterized. The present Pd(II) azo complex behaves as a very efficient heterogeneous catalyst in the Suzuki coupling and Sonogashira coupling reaction in water medium. Aryl halides, coupled with phenylboronic acids (Suzuki-Miyaura reaction) or terminal alkyne (Sonogashira reaction), smoothly afford the corresponding cross-coupling products in excellent yields (83-100% yield for Suzuki reaction and 68-96% yield for Sonogashira reaction of aryl halides) under phosphine-free reaction conditions in the presence of polystyrene anchored Pd(II) azo complex catalyst in water medium. Furthermore, the catalyst has shown good thermal stability and recyclability. This polymer-supported Pd(II) catalyst could be easily recovered by simple filtration of the reaction mixture and reused for more than six consecutive trials without a significant loss of its catalytic activity.     

The electrochemical reaction mechanism of selenocystine on selenium-gold film modified glassy carbon electrode

A simple and selective voltammetric method based on selenium-gold film modified glassy carbon electrode has been developed for investigating electrochemical reaction mechanism of selenocystine. With N₂ saturated, redox reactions between selenocystine (SeC) and selenocysteine (SeCys) were judged to be two simple electron-transfer processes. With air saturated, the reduction reaction was diagnosed to be EC catalytic reaction (the chemical oxidation reaction of the SeCys by O₂ (C) following the electron-transfer reaction (E)) and oxidation reaction is a simple electron-transfer process. With pure O₂ saturated, only reduction peak was observed and the reaction was judged to be EC catalytic reaction. The electron-transfer numbers of redox reaction were calculated to be 2 by chronocoulometry and rotating disk electrode.     

Catalytic effect of copper on the hexacyanoferrate(III)-cyanide redox reaction-I The uncatalysed and catalysed reactions

A kinetic study of the hexacyanoferrate(III)-cyanide redox reaction has been made in connection with development of a new catalytic method for copper. The reaction kinetics change with time from first- to second-order dependence with respect to hexacyanoferrate(III). The reaction is nearly inverse first-order with respect to hexacyanoferrate(II) and first-order with respect to cyanide. The reaction shows a strong positive primary salt effect, but a very small increase in the reaction rate with temperature is found. A parallel reaction proceeds with a first-order dependence with respect to hydroxide. A tentative mechanism is proposed for the first reaction, involving the formation of cyanogen radicals. The second reaction corresponds to the well-known decomposition of hexacyanoferrate(III) in alkaline medium. The catalysed reaction exhibits similar kinetics with respect to hexacyanoferrate(II) and (III) but is zero-order with respect to cyanide and hydroxide and first-order with respect to catalyst. The proposed mechanism involves two consecutive interactions of the hexacyanoferrate(III) with copper(I) and with copper(II) cyanide complexes respectively, followed by a 2-electron oxidation of a co-ordinatively bridging cyanide group.     

Theoretical Study on the Mechanism of CF2 Reaction with CH2O

The insertion reaction mechanism of CF2 with CH2O was investigated at the B3LYP/6-311G（d）//MP2/6-311G（d） level. The geometric conformations at each stationary point in reaction potential surface were fully optimized and the transition states were verified by intrinsic reaction coordinate （IRC） and frequency analysis. The energies of all reactants were calculated with CCSD（T）/6-311G（d）//G2MP2 methods. Results indicated that the P1 reaction route with difuoroaldehyde as product is the dominant reaction pathway, which exhibits nucleophilic character. According to NBO analysis, the starting point of insertion reaction is the interaction between carbene LP（C3） and formaldehyde π（Cl-O2）. Besides, the thermodynamic and dynamic properties of dominated reaction （1） at different temperature were studied with statistic thermodynamic method and Eyring transition state theory adjusted by Wigner means, from which the proper temperature （500- 1200 K） of reaction （1） could be estimated. Finally, the thermo- dynamic and dynamic properties of insertion reaction mechanisms （CF2, CX2 （X = Cl, Br） with CH2O） were compared and discussed.     

Water formation reaction on Pt(111): role of the proton transfer

The catalytic water formation reaction on Pt(111) was investigated by kinetic Monte Carlo simulations, where the interaction energy between reaction species and the high mobility of H(2)O molecule was considered. Results obtained clearly reproduce the scanning tunneling microscopy images which show that the reaction proceeds via traveling the reaction fronts on the O-covered Pt(111) surface by creating H(2)O islands backwards. The reaction front is a mixed layer of OH and H(2)O with a (square root 3 x square root 3)R30(o) structure. Coverage change during the reaction is also reproduced in which the reaction consists of three characteristic processes, as observed by the previous experiments. The simulation also revealed that the proton transfer from H(2)O to OH plays an important role to propagate the water formation.     

Sodium chloride-catalyzed oxidation of multiwalled carbon nanotubes for environmental benefit

A sodium chloride (NaCl) catalyst (0.1 w/w %) lowers the oxidation temperature of graphitized multiwalled carbon nanotubes: MWCNT-20 (diameter: 20-70 nm) and MWCNT-80 (diameter: 80-150 nm). The analysis of the reaction kinetics indicates that the oxidation of MWCNT-20 and MWCNT-80 mixed with no NaCl exhibits single reaction processes with activation energies of E(a) = 159 and 152 kJ mol(-1), respectively. The oxidation reaction in the presence of NaCl is shown to consist of two different reaction processes, that is, a first reaction and a second reaction process. The first reaction process is dominant at a low temperature of around 600 degrees C, while the second reaction process becomes more dominant than the first one in a higher temperature region. The activation energies of the first reaction processes (MWCNT-20: E(a1) = 35.7 kJ mol(-1); MWCNT-80: E(a1) = 43.5 kJ mol(-1)) are much smaller than those of the second reaction processes (MWCNT-20: E(a2) = 170 kJ mol(-1); MWCNT-80: E(a2) = 171 kJ mol(-1)). The comparison of the kinetic parameters and the results of the spectroscopic and microscopic analyses imply that the lowering of the oxidation temperature in the presence of NaCl results from the introduction of disorder into the graphitized MWCNTs (during the first reaction process), thus increasing the facility of the oxidation reaction of the disorder-induced nanotubes (in the second reaction process). It is found that the larger nanopits and cracks on the outer graphitic layers are caused by the catalytic effect of NaCl. Therefore, the NaCl-mixed samples showed more rapid and stronger oxidation compared with that of the nonmixed samples at the same residual quantity.     

N(4S)+CH3X(X=Cl、Br)反应机理的理论研究

The reaction of N(4S)+CH3X(X=Cl、Br) was studied by the ab initio method. The geometries of the reactants, transition states and products were optimized at the MP2/6-311+G(d,p) level. The corresponding vibration frequencies were calculated at the same level. The single-point calculations for all the stationary points were carried out at the MP2/6-311++G(3df,2p) and the QCISD(T)/6-311+G(d,p) levels using the MP2/6-311+G(d,p) optimized geometries. The energies of all the stationary points were calculated by the G2MP2 method. The results of this theoretical study indicate that the reaction has three reaction channels: H abstraction reaction channel a, Cl or Br abstraction reaction channel b and substitution reaction channel c. For the N(4S)+CH3Cl reaction, reaction channel a is the main reaction channel. Reaction channels b and c may have a slight contribution in the reaction. For the N(4S)+CH3Br reaction, reaction channel a is the main reaction channel. Reaction channels b and c may have some contribution in the reaction.     

溴酸钾-鲁米诺后化学发光法检测水中微量偏二甲肼

实验发现偏二甲肼(UDMH)在溴酸钾-鲁米诺化学发光反应体系中的后化学发光反应.在对这一后化学发光反应的动力学性质、发光条件,包括溴酸钾浓度、鲁米诺浓度、管长、流速和酸碱度条件等研究的基础上,建立了后化学发光反应法测定偏二甲肼的新方法,并讨论了其可能的反应机理.该方法的线性范围为1.0×10-7～1.0×10-5g/L...     

2-取代吲哚的染料敏化光氧化反应

2-苯基吲哚 (1a) 在甲醇中的染料敏化光氧化反应给出2-苯基-2-(2'-苯基-3'-吲哚基)二氢吲哚-3-酮 (2a) 和2-甲氧基-2-苯基二氢吲哚-3-酮 (4a), 相应N-甲基取代产物由1-甲基-2-苯基吲哚 (1b) 的类似反应获得。发现反应产物分布随吲哚 (1) 的浓度和介质酸度的变化而变化。对反应机理进行了推测, 其中当1a的反应在乙腈中进行时, 分离到了相应的反应中间体: 2-苯基-3H-吲哚-3-酮 (3a)。     

氢原子共线交换反应的动力学计算I.Cl与HCl反应几率的振荡现象研究

我们利用超球坐标对共线Cl+HCl(V-3)→ClH(V'≤3)+Cl作了一维精确量子计算,计算所用势能面是LEPS型,Et=-3.23KJ/mol, 得到了态态反应几率等动力学信息, 通过分析结果发现, 反应是振动绝热的, 即以对角(V'-V')反应几率为主,非对角(V' V')反应几率小于0.1, 反应几率随总能量表现出强裂地振荡, 在有阱的势能面上动力学共振增强。     

三苯基环戊二烯扩环反应研究

研究在高氯酸银作用下,三苯基环戊二烯扩环氧化生成三苯基取代吡喃盐的反应,并初步探讨了反应机理     

Reaction of stabilized Criegee intermediates from ozonolysis of limonene with sulfur dioxide: ab initio and DFT study

The mechanism of the reaction of the sulfur dioxide (SO(2)) with four stabilized Criegee intermediates (stabCI-CH(3)-OO, stabCI-OO, stabCIx-OO, and stabCH(2)OO) produced via the ozonolysis of limonene have been investigated using ab initio and DFT (density functional theory) methods. It has been shown that the intermediate adduct formed by the initiation of these reactions may be followed by two different reaction pathways such as H migration reaction to form carboxylic acids and rearrangement of oxygen to produce the sulfur trioxide (SO(3)) from the terminal oxygen of the COO group and SO(2). We found that the reaction of stabCI-OO and stabCH(2)OO with SO(2) can occur via both the aforementioned scenarios, whereas that of stabCI-CH(3)-OO and stabCIx-OO with SO(2) is limited to the second pathway only due to the absence of migrating H atoms. It has been shown that at the CCSD(T)/6-31G(d) + CF level of theory the activation energies of six reaction pathways are in the range of 14.18-22.59 kcal mol(-1), with the reaction between stabCIx-OO and SO(2) as the most favorable pathway of 14.18 kcal mol(-1) activation energy and that the reaction of stabCI-OO and stabCH(2)OO with SO(2) occurs mainly via the second reaction path. The thermochemical analysis of the reaction between SO(2) and stabilized Criegee intermediates indicates that the reaction of SO(2) and stabilized Criegee intermediates formed from the exocyclic primary ozonide decomposition is the main pathway of the SO(3) formation. This is likely to explain the large (~100%) difference in the production rate in the favor of the exocyclic compounds observed in recent experiments on the formation of H(2)SO(4) from exocyclic and endocyclic compounds.     

On the effect of copper (II) and chloride ions on the iodate-hydrogen peroxide reaction in the presence and absence of manganese (II)

The effect of copper (II) and chloride ions on the manganese (II) catalyzed iodate-peroxide reaction has been examined with reference to the hydrogen peroxide-iodic acid-manganese (II)-organic species oscillatory reaction. The observations are considered to provide evidence for iodine dioxide as the key intermediate in the manganese (II) catalyzed reaction. Kinetic data for the copper (II) catalyzed reaction are reported.     

磷酸特地唑胺的合成新方法

以(5R)-3-(4-溴-3-氟苯基)-5-羟甲基噁唑烷-2-酮为起始原料,在[PdCl₂(dppf)]·CH₂Cl₂催化下与联硼酸频那醇酯反应得到硼化物,继而与5-溴-2-(2-甲基-2H-四唑-5-基)吡啶进行Suzuki反应得到特地唑胺,收率82.9%。 分别考察了催化体系对硼化反应和Suzuki反应的影响,确定了较佳的反应条件。 特地唑胺与二苄基N,N-二异丙基亚磷酰胺反应得到二苄基保护的磷酸特地唑胺,随后经Pd/C脱苄得到磷酸特地唑胺,总收率66.2%。     

Rapid solid-state metathesis routes to aluminum nitride

Metathesis (exchange) reactions offer the possibility of controlling temperature through a judicious choice of precursors. Here, a reaction between AlCl(3) and Ca(3)N(2) is found to produce phase-pure aluminum nitride (AlN) in seconds. The CaCl(2) byproduct salt, whose formation drives this highly exothermic reaction, is simply washed away after reaction completion. SEM images demonstrate that the AlN product is a micron-sized powder, while TEM shows well-formed crystallites. Thermodynamic calculations indicate that a reaction temperature of 2208 K could be reached under adiabatic conditions. Using an in situ thermocouple and a stainless steel reactor vessel to hold the precursors, a reaction temperature of 1673 K is measured 0.8 s after initiation. Switching to a thermally insulating ceramic vessel produces a maximum reaction temperature of 2010 K because of the more nearly adiabatic conditions. The high reaction temperature appears to be critical to forming phase-pure AlN. Experiments with Li(3)N, instead of Ca(3)N(2), produce lower temperatures (1513 K), resulting in both Al and Al(2)O(3) impurities.     

CIONO2与O(3P)的反应机理

采用密度泛函方法Ｂ３ＬＹＰ／６－３１Ｇ＾＊研究了反应Ｏ（＾３Ｐ）＋ＣｌＯＮＯ２→ＣｌＯ＋ＮＯ３反应Ｏ（＾３Ｐ）＋ＣｌＯＮＯ２→Ｏ２＋ＣｌＯＮＯ的反应机。该结果与大部分实验者的推论是一致的,对于后一反应,其两种反应途径的活化势垒较为相近,表明两种反应途径均是可能的。