Ionic liquid 1-(4-nitritobutyl)-3-methylimidazolium chloride as a new reagent for the efficient N-nitrosation of secondary amines under mild conditions

Abstract  

1-(4-Nitritobutyl)-3-methylimidazolium chloride has been developed as a new reagent for efficient nitrosation of secondary amines at 0 °C to room temperature. A variety of N-nitrosamines were prepared in excellent yields by use of this task-specific ionic liquid under mild and heterogeneous conditions.     

Ionic liquid 1-(3-Trimethoxysilylpropyl)-3-methylimidazolium nitrite as a new reagent for the efficient diazotization of aniline derivatives and in situ synthesis of azo dyes

A new ionic liquid 1-(3-trimethoxysilylpropyl)-3-methylimidazolium nitrite was synthesized. This ionic liquid was used as a convenient nitrosonium source in diazotization of arylamines into their corresponding diazonium salts which were converted into their related azo dyes via the in situ azo-coupling with aniline derivatives or phenolic compounds. The diazotization of anilines in this ionic liquid and subsequent azo-coupling generated the related azo dyes in good to excellent yields at 0?C5 °C in short reaction times via a simple experimental procedure.     

Chemoselective N-nitrosation of secondary amines under heterogeneous and mild conditions via in situ generation of HNO_2

A wide variety of secondary amines are chemoselectively subjected to N-nitrosation reaction with treatment of citric acid and NaNO2 in the presence of wet SiO2(50%,w/w)in dichloromethane at room temperatture under heterogeneous conditions.The N-nitrosation method is very simle and products can be easily isolated with good to high yields.     

1-(1-Alkylsulfonic)-3-methylimidazolium chloride as a reusable Brønsted acid catalyst for the regioselective azidolysis of epoxides under solvent-free conditions

In this study, 1-(1-alkylsulfonic)-3-methylimidazolium chloride as a new, green, and reusable Brønsted acid catalyst was prepared. In this protocol, we used for the regioselective ring-opening reactions of various epoxiodes with sodium azide to afford the corresponding β-azido alcohols in excellent yields and short reaction time under mild and neutral reaction conditions. This method offers several advantages including excellent regioselectivity, clean reactions, simple work-up procedure, a recyclable catalyst, and use of an eco-friendly catalyst.     

Ruthenium(Ⅲ) chloride as an efficient catalyst for the synthesis of perimidine derivatives under mild conditions

Various biologically important perimidine derivatives have been synthesized efficiently from various ketones and naphthalene1,8-diamine by using a catalytic amount of RuC13 (1 mol%). This method is a very simple and high yielding reaction for the synthesis of perimidine derivatives.     

Synthesis and Characterization of a Novel Ionic Liquid Polymer： Poly（1-（3-aminobenzyl）-3-methylimidazolium chloride）

A new type of polymerizable ionic liquid （IL） 1-（3-aminobenzyl）-3-methylimidazolium chloride （AMIC） was synthesized to obtain a novel polymer salt poly（1-（3-aminobenzyl）-3-methylimidazolium chloride） （PAMIC）. The AMIC was structurally characterized by mass spectrometry and Fourier transform infrared spectrometry （FTIR）. The structure, morphology and properties of PAMIC were investigated by FTIR, ultraviolet visible absorption spectra （UV-Vis）, scanning electron microscopy （SEM）, energy dispersive X-ray spectroscopy （EDX）, conductivity measurement and thermo- gravimetric analysis （TGA）. The PAMIC was spherulitic with an average diameter of about 50 nm and showed high conductivity and excellent thermal stability.     

1-(1-Alkylsulfonic)-3-methylimidazolium chloride Brönsted acidic ionic liquid catalyzed Skraup synthesis of quinolines under microwave heating

1-(1-Alkylsulfonic)-3-methylimidazolium chloride Brönsted acidic ionic liquids are shown as excellent catalysts and reaction mediums for Skraup synthesis of quinolines under microwave conditions without the use of nitrobenzene as an oxidant and metal catalysts.     

Ionic liquid mediated Cu-catalyzed cascade oxa-Michael-oxidation: efficient synthesis of flavones under mild reaction conditions

Flavonoids are a class of natural products, found in a wide range of vascular plants and dietary components. Their low toxicity and extensive biological activities, including anti-cancer and anti-bacterial, have made them attractive candidates to serve as therapeutic agents for many diseases. Herein, we disclose a highly efficient synthetic method of CuI-catalyzed cascade oxa-Michael-oxidation, using chalcones as substrates, mediated by the ionic liquid [bmim][NTf2] at a low temperature. This efficient synthetic method has demonstrated high synthetic utility and can afford flavones in good to high yields (up to 98%).     

The Mn(acac)3—RCN—CCl4 system as a new efficient reagent for the oxidation of secondary alcohols into ketones

The Mn(acac)₃—RCN—CCl₄ system was found to be efficient for the oxidation of secondary alcohols into the corresponding ketones in 80—93% yields. The oxidation proceeds through the formation of alkyl hypochlorites, which are generated from CCl₄ and the alcohols in the presence of the Mn(acac)₃—RCN catalytic system (R = Me, Et, and Ph).     

An efficient one-pot organocatalytic synthesis of 9-(1H-indol-3-yl)-xanthen-4-(9H)-ones under mild aqueous micellar conditions

An efficient and facile l-proline-catalyzed three-component coupling of 2-hydroxybenzaldehyde, 5,5-dimethyl-1,3-cyclohexanedione (dimedone), and indole has been accomplished under mild aqueous micellar conditions to deliver a small library of 9-(1H-indol-3-yl)-xanthen-4-(9H)-ones of potential biological relevance. Under optimized conditions [10 mol % of l-proline, water (2 mL), SDS (23 mg, 0.08 mmol), rt], the reaction was highly selective toward the target compound and essentially free from competitive two-component byproduct formation.     

Simple and efficient synthesis of 2,6-dialkyl-3,5-dialkoxycarbonyl-4-(3-aryl-1-phenyl-pyrazol-4-yl)pyridines using TPAP/NMO as a catalyst under mild conditions

Biologically important pyrazolylpyridines were synthesized in excellent yield by the oxidation of pyrazolyl 1,4-dihydropyridines (pyrazolyl 1,4-DHPs) using tetrapropylammonium perruthenate/N-methylmorpholine-N-oxide (TPAP/NMO) under mild conditions at 0 °C.     

Using acidic ionic liquid 1-butyl-3-methylimidazolium hydrogen sulfate in selective nitration of phenols under mild conditions

Selective nitration of phenols with sodium nitrate was carried out in the presence of acidic ionic liquid 1-butyl-3-methylimidazolium hydrogen sulfate at room temperature in good to high yields and short reaction times. The use of inexpensive and relatively non toxic acidic reagent is an advantage of this method.     

An efficient, rapid, and regioselective bromination of anilines and phenols with 1-butyl-3-methylpyridinium tribromide as a new reagent/solvent under mild conditions

1-Butyl-3-methylpyridinium tribromide, [BMPy]Br₃ proves to be a highly efficient, regioselective reagent/solvent for nuclear bromination of various anilines and phenols. The synthesis and characterization of the room temperature ionic liquid [BMPy]Br₃ (2) is described. The bromination was carried out in the absence of organic solvents and in most cases the only extraction solvent needed was water. The spent 1-butyl-3-methylpyridinium bromide (1) was easily recycled.     

3,4-dihydro-6,7-dimethoxy-4-methyl-3-oxoquinoxaline-2-carbonyl chloride as a sensitive fluorescence derivatization reagent for amines in liquid chromatography

A rapid and sensitive method for the fluorescence derivatization of primary and secondary amines is described, based on the reaction of the amines with 3,4-dihydro-6,7-dimethoxy-4-methyl- 3-oxoquinoxaline-2-carbonyl chloride. Cyclohexylamine, n-hexylamine and di-n-butylamine were used as model compounds to optimize the derivatization conditions. The reagent reacts with the amines in acetonitrile in the presence of potassium carbonate very rapidly to give the corresponding fluorescent amides, which can be separated on a reversed-phase column, TSKgel ODS-80TM, with aqueous acetonitrile as eluent. Alcohols and amino acids did not give any fluorescent products under the derivatization conditions. The detection limits are in the range 5–50 fmol per 20-μl injection. Reactions with other amines are also discussed.     

Palladium (II) chloride as a reagent for the mild aromatization of piperidine and cyclohexanone

Summary Piperidine may be rapidly converted into pyridine using palladium(II) Chloride or tetrachloropalladate(II) ion in aqueous medium at pH 10-11 and in the absence of oxygen. Cyclohexanone may be aromatized under the same conditions, although more slowly. The products fromo-cyclohexenylcyclohexanone are also described.     

Wet carbon-based solid acid/NaNO_3 as a mild and efficient reagent for nitration of aromatic compound under solvent free conditions

Nitro aromatic compound can be obtained in high yields via nitration of aromatic compound with wet carbon-based solid acid and NaNO_3 under solvent free oxidation at room temperature.