Silica-supported zinc bromide (ZnBr2/SiO2): a highly efficient heterogeneous catalyst for coupling acid chlorides with terminal alkynes

Silica-supported zinc bromide (ZnBr₂/SiO₂) is an efficient heterogeneous catalyst for the rapid synthesis of ynones by cross-coupling of acid chlorides with terminal alkynes in good to excellent yields under solvent-free conditions at room temperature.     

Copper‐Free Sonogashira Coupling of Acid Chlorides with Terminal Alkynes in the Presence of a Reusable Palladium Catalyst: An Improved Synthesis of 3‐Iodochromenones (=3‐Iodo‐4H‐1‐benzopyran‐4‐ones)

Pd/C is used as an efficient catalyst for the copper‐free Sonogashira coupling of acid chlorides and terminal alkynes to afford ynones in high yields (Tables 1 and 3). Cyclization of (2‐methoxyaryl)‐substituted ynones induced by I₂/ammonium cerium(IV) nitrate (CAN) at room temperature gave 3‐iodochromenones (=3‐iodo‐4H‐1‐benzopyran‐4‐ones) in excellent yield (Table 4).     

Reduced graphene oxide supported copper oxide nanocomposites: An efficient heterogeneous and reusable catalyst for the synthesis of ynones, 1,3-diynes and 1,5-benzodiazepines in one-pot under sustainable reaction conditions

A greener and efficient method for the synthesis of ynones and 1,3-diynes using copper oxide nanoparticles (CuONPs) doped reduced graphene oxide (CuO@rGO) catalyst under palladium, ligand and solvent free conditions have been developed. The catalyst was subsequently utilized for the synthesis of biologically active 1,5-benzodiazepines in one pot via sequential addition of acyl chlorides, terminal alkynes and o-phenylenediamines. The methodology initially involves in situ formation of ynones which react with o-phenylenediamines in presence of ethanol to afford a wide variety of benzodiazepines. Mild reaction conditions, good to an excellent yield of the products, cheap and recyclable catalyst make this methodology environmentally benign and sustainable.     

Highly-efficient and recyclable nanosized MCM-41 anchored palladium bipyridyl complex-catalyzed coupling of acyl chlorides and terminal alkynes for the formation of ynones

A highly-efficient and practical method for the formation of ynones from a variety of acyl chlorides and terminal alkynes catalyzed by a nanosized MCM-41 anchored palladium bipyridyl complex is described herein. Aroyl, heteroaroyl, and alkyl acyl chlorides were easily coupled with terminal alkynes, giving good to high isolated yields in the presence of a very low catalyst loading (0.002-0.1 mol % Pd) in Et₃N or diisopropylethylamine at 50 °C. Furthermore, the reaction scale was up to 150 mmol for a single batch reaction, providing the potential for practically synthetic application. After centrifugation, the supported catalyst was able to be recycled and reused several times with only a slight decrease in activity.     

Highly efficient transition metal-free coupling of acid chlorides with terminal alkynes in [bmim]Br: A rapid route to access ynones using MgCl2

A simple, mild, highly efficient and transition metal-free protocol for synthesis of ynones in an ionic liquid is described. In this approach, the coupling reaction of different acid chlorides with terminal alkynes was efficiently carried out using 0.05 mol% MgCl₂ in the presence of triethylamine in [bmim]Br at room temperature to afford the corresponding ynones in good to excellent yields. This method is highly efficient for various acid chlorides and alkynes including aliphatic, aromatic, and heteroaromatic substrates bearing different functional groups. The influence of some parameters in this reaction including type of ionic liquid, base and catalyst has been discussed.     

Genesis of coordinatively unsaturated palladium complexes dissolved from solid precursors during Heck coupling reactions and their role as catalytically active species

The Forum Article critically summarizes investigations and discussions on the nature and role of potential active species in C-C coupling reactions of the Heck type using catalyst systems with "ligand-free" inorganic salts, simple inorganic complexes, and supported and nonsupported (colloidal) Pd particles. From a series of experiments and reports, it can be concluded that the "active species" is generated in situ in catalytic systems at higher temperature conditions (>100 degrees C). In all heterogeneous systems with solid Pd catalysts, Pd is dissolved from the solid catalyst surface under reaction conditions by a chemical reaction (complex formation and/or oxidative addition of the aryl halide), forming extremely active coordinatively unsaturated Pd species. Pd is partially or completely redeposited onto the support at the end of the reaction when the aryl halide is used up. The Pd dissolution-redeposition processes correlate with the reaction rate and are strongly influenced by the reaction conditions. Skilled preparation of the catalyst and careful adjustment of the reaction conditions allowed the development of highly active heterogeneous catalysts (Pd/C, Pd/metal oxide, and Pd/zeolite), converting aryl bromides and aryl chlorides in high yields and short reaction times. Reaction conditions have been developed allowing the conversion of bromobenzene with turnover numbers (TONs) of 10(7) and even of unreactive aryl chlorides (chlorobenzene and chlorotoluene) in high yields with simple "ligand-free" Pd catalyst systems like PdCl2 or Pd(OH)2 in the absence of any organic ligand. Simple coordinatively unsaturated anionic palladium halide (in particular, bromo) complexes [PdXn](m-) play a crucial role as precursor and active species in all ligand-free and heterogeneous catalyst systems and possibly in Heck reactions at all.     

A copper- and solvent-free coupling of acid chlorides with terminal alkynes catalyzed by a polystyrene-supported palladium(0) complex under aerobic conditions

A polystyrene-supported palladium(0) complex [PS-dpp-Pd(0)] is an efficient catalyst for the copper- and solvent-free acylation of terminal alkynes with different acid chlorides in the presence of triethylamine as base, giving the corresponding ynones in good yields.     

An efficient palladium-catalyzed coupling reaction of lithium alkynyltriisopropoxyborates with acid chlorides: a new access to synthesis of conjugated ynones

An efficient palladium-catalyzed protocol for the synthesis of ynones from lithium alkynyltriisopropoxyborates with acid chlorides under mild neutral conditions.     

Efficient palladium catalysts for the amination of aryl chlorides: a comparative study on the use of phosphium salts as precursors to bulky, electron-rich phosphines

Alkyl-di-(1-adamantyl)phosphonium salts are practical ligand precursors for the palladium-catalyzed amination of aryl chlorides. In the presence of typically 0.5 mol% Pd(OAc)₂ and 1 mol% of ligand precursor a variety of activated and deactivated aryl chlorides can be aminated in good to excellent yield (73-99%). Applying optimized conditions catalyst turnover numbers up to 10,000 have been achieved.     

Using Pd-salen complex as an efficient catalyst for the copper-and solvent-free coupling of acyl chlorides with terminal alkynes under aerobic conditions

<正>The palladium-salen complex palladium(Ⅱ) N,N'-bis{[5-(triphenylphosphonium)-methyl]salicylidene}-1,2-ethanediamine chloride was found to be a highly active catalyst for the copper- and solvent-free coupling reaction of terminal alkynes with different acyl chlorides in the presence of triethylamine as base,giving excellent ynones under aerobic conditions.     

Guanidine/Pd(OAc)2-catalyzed room temperature Suzuki cross-coupling reaction in aqueous media under aerobic conditions

A highly efficient Pd(OAc)2/guanidine aqueous system for the room temperature Suzuki cross-coupling reaction has been developed. The new water-soluble and air-stable catalyst Pd(OAc)2.(1f)2 from Pd(OAc)2 and 1,1,3,3-tetramethyl-2-n-butylguanidine (1f) was synthesized and characterized by X-ray crystallography. In the presence of Pd(OAc)2.(1f)2, coupling of arylboronic acids with a wide range of aryl halides, including aryl iodides, aryl bromides, even activated aryl chlorides, was carried out smoothly in aqueous solvent to afford the cross-coupling products in good to excellent yields and high turnover numbers (TONs) (TONs up to 850,000 for the reaction of 1-iodo-4-nitrobenzene and phenylboronic acid). Furthermore, this mild protocol could tolerate a broad range of functional groups.     

9-fluorenylphosphines for the Pd-catalyzed sonogashira, suzuki, and Buchwald-Hartwig coupling reactions in organic solvents and water

The lithiation/alkylation of fluorene leads to various 9-alkyl-fluorenes (alkyl=Me, Et, iPr, -Pr, -C18H25) in>95% yields, for which lithiation and reaction with R2PCl (R=Cy, iPr, tBu) generates 9-alkyl, 9-PR2-fluorenes which constitute electron-rich and bulky phosphine ligands. The in-situ-formed palladium-phosphine complexes ([Na2PdCl4], phosphonium salt, base, substrates) were tested in the Sonogashira, Suzuki, and Buchwald-Hartwig reactions of aryl chlorides and aryl bromides in organic solvents. The Sonogashira coupling of aryl chlorides at 100-120 degrees C leads to>90% yields with 1 mol% of Pd catalyst. The Suzuki coupling of aryl chlorides typically requires 0.05 mol% of Pd catalyst at 100 degrees C in dioxane for quantitative product formation. To carry out "green" cross-coupling reactions in water, 9-ethylfluorenyldicyclohexylphosphine was reacted in sulphuric acid to generate the respective 2-sulfonated phosphonium salt. The Suzuki coupling of activated aryl chlorides by using this water-soluble catalyst requires only 0.01 mol% of Pd catalyst, while a wide range of aryl chlorides can be quantitatively converted into the respective coupling products by using 0.1-0.5 mol% of catalyst in pure water at 100 degrees C. Difficult substrate combinations, such as naphthylboronic acid or 3-pyridylboronic acid and aryl chlorides are coupled at 100 degrees C by using 0.1-0.5 mol% of catalyst in pure water to obtain the respective N-heterocycles in quantitative yields. The copper-free aqueous Sonogashira coupling of aryl bromides generates the respective tolane derivatives in>95% yield.     

Pd-carbene catalyzed carbonylation reactions of aryl iodides

A series of carbene complexes [PdBr(2)((i)Pr(2)-bimy)L] (C2-C13) with different types of co-ligands (L) have been tested for their catalytic activities in the carbonylative annulation of 2-iodophenol with phenylacetylene in DMF to afford the respective flavone 2a. Complex C12 with an N-phenylimidazole co-ligand showed the best activity and also afforded high yields when the substrate scope was extended to other aryl or pyridyl acetylenes. In addition, catalyst C12 was also efficient in the carbonylative annulation of 2-iodoaniline with acid chlorides giving the desirable 2-substituted 4H-3,1-benzoxazin-4-ones (4) in good yields. Additionally, this Pd-NHC complex also proved to be a very efficient catalyst for the hydroxycarbonylation of iodobenzene derivatives at low catalyst loading and under low CO pressure. These results demonstrate the versatility and efficiency of this phosphine-free Pd(II)-NHC complex in different types of carbonylations of aryl iodides under mild conditions.     

A straightforward synthesis of ynones by reaction of dimethylalkynylaluminum reagents with acid chlorides

Alkynyldimethylaluminum reagents react with various aromatic and aliphatic acid chlorides in a fast and efficient way. This reaction provides a simple entry to numerous ynones, using readily available, inexpensive, and nontoxic metalating agent, and does not require any transition metal as a catalyst.     

Cross-Coupling of Diarylborinic Acids and Anhydrides with Arylhalides Catalyzed by a Phosphite/N-Heterocyclic Carbene Co-supported Palladium Catalyst System

A highly efficient cross-coupling of diarylborinic acids and anhydrides with aryl chlorides and bromides has been effected by using a palladium catalyst system co-supported by a strong σ-donor N-heterocyclic carbene (NHC), N,N'-bis(2,6-diisopropylphenyl) imidazol-2-ylidene, and a strong π-acceptor phosphite, triphenylphosphite, in tert-BuOH in the present of K(3)PO(4)·3H(2)O. Unsymmetrical biaryls with a variety of functional groups could be obtained in good to excellent yields using as low as 0.01, 0.2-0.5, and 1 mol % palladium loadings for aryl bromides and activated and deactivated aryl chlorides, respectively, under mild conditions. A ligand synergy between the σ-donor NHC and the π-acceptor phosphite in the Pd/NHC/P(OPh)(3) catalytic system has been proposed to be responsible for the high efficacy to arylchlorides in the cross-coupling. A scalable and economical process has therefore been developed for synthesis of Sartan biphenyl from the Pd/NHC/P(OPh)(3) catalyzed cross-coupling of di(4-methylphenyl)borinic acid with 2-chlorobenzonitrile.     

An efficient and high-yielding one-pot synthesis of 4-acyl-1,2,3-triazoles via triisopropylsilyl-protected ynones

A practical and efficient process has been developed for the synthesis of 1-substituted 4-acyl-1H-1,2,3-triazoles using a three-step one-pot synthetic approach. This transformation involves an initial preparation of triisopropylsilyl (TIPS)-protected ynones from acid chlorides and TIPS-acetylene, followed by a AgF-mediated TIPS deprotection and Cu-catalyzed Huisgen cycloaddition. The increased chemical stability of TIPS-protected ynones was an important factor in the high overall product yield.     

An efficient catalyst system for diaryl ether synthesis from aryl chlorides

The combination of 2-phosphino-substituted N-arylpyrroles or related indoles (cataCXium^®P) and Pd(OAc)₂ allows for efficient cross-coupling reactions of aryl chlorides and phenols to give diaryl ethers. A variety of aryl and heteroaryl chlorides can be coupled with substituted phenols showing unprecedented catalyst turnover numbers.     

Synthesis and catalytic application of Pd/PdO/Fe3O4@polymer-like graphene quantum dots

A novel approach was achieved for growing citric acid towards polymer-like graphene quantum dots (PGQD) with high efficiency in the presence of sodium hydroxide as a base catalyst. This protocol is completely safe, simple, fast, and efficient by a bottom up strategy. Thermal treatment of a mixture containing citric acid with NaOH at 300 °C gave PGQD during 5 min. The reaction afforded a new heterogeneous catalyst, Pd/PdO/Fe₃O₄@PGQD, in the presence of Pd and Fe₃O₄. The magnetically recoverable catalyst showed high activity in the oxidation of alkylarenes and alcohols using H₂O₂ as a green oxidant at room temperature. Comparison of the results with previous reports showed the efficiency of the catalyst to have high turnover numbers in mild reaction conditions.     

An ortho-palladated dimethylbenzylamine complex as a highly efficient turnover catalyst for the decomposition of P=S insecticides. Mechanistic studies of the methanolysis of some P=S-containing phosphorothioate triesters

An ortho-palladated complex Pd(dmba)(py)(OTf) (9), or Pd(N,N-dimethylbenzylamine)(pyridine)(trifluoromethanesulfonate), was synthesized and its solution properties in methanol studied as a function of pH. In neutral solution the triflate dissociates from the complex to give a dominant form Pd(dmba)(py)(HOCH3), and in acid the pyridine dissociates to give Pyr-H+ and Pd(dmba)(HOCH3)(HOCH3). Under basic conditions, Pd(dmba)(py)(HOCH3) ionizes to give Pd(dmba)(py)(-OCH3) from which the pyridine can dissociate to yield a mixture of a bis-methoxy-bridged dimer (Pd(dmba)(-OCH3))2 (15-dimer), and its monomer Pd(dmba)(HOCH3)(-OCH3). Kinetic studies under buffered conditions reveal that 9 is an effective catalyst for the methanolysis of fenitrothion and other P=S pesticides. The active form of the catalyst is a basic one having one associated methoxide generated with an apparent (s)(s)pK(a) of 10.8. Analysis of the change in the UV/vis spectrum as a function of pH generates a spectrophotometric (s)(s)pK(a) of 10.8 +/- 0.1. This catalytic system is shown to promote the methanolysis of fenitrothion (3), diazinon (4), quinalphos (5), coumaphos (10) and dichlofenthion (11) at 0.05 mol dm(-3) triethyl amine buffer, (s)(s)pH 10.8, 25 degrees C, under turnover conditions where the [phosphorothioate]/[9] ratio is 48.6, 13.4, 13.4, 18.6, and 48.6 respectively. In all cases, the products were derived from displacement of the leaving group by methoxide, the second-order turnover rate constants being 36.9, 0.45, 0.12, >146.7 and 44.3 dm3 mol(-1) s(-1) respectively. An associative mechanism for the catalyzed methanolysis of the P=S pesticides is proposed where a transiently coordinated S=P substrate is intramolecularly attacked by the Pd(II)-coordinated methoxide.     

2-Halogenoethyl and 2-halogenoethylthiol esters of furan series carboxylic acids

The corresponding 2-chloroethyl (2-chloroethylthiol) esters are synthesized by the action of ethylene chlorohydrin (chloroethylmercaptan) on the acid chlorides of 5-nitrofuran carboxylic acid and 3-(5-nitrofuryl-2)acrylic acid. The acid chlorides of benzoic, furan carboxylic, and 3-(furyl-2)-acryllc acids react with ethylene sulfide, to give 2-chloroethyl esters of those acids. Ethylene oxide does not react with the acid chlorides of benzoic acid and furan series carboxylic acids either at room temperature or on heating at 50° for 1 hour.