Hydrogenolysis of rice husk protolignin. II

It has been established that the partial hydrogenolysis of rice husk protolignin (RHP) takes place at a temperature of 180°C and an initial hydrogen pressure of 10 atm in an alkaline medium. Conditions have been selected under which the greatest yield of low-molecular-weight products (91% on the Komarov lignin) is obtained: hydrogenolysis in an alkaline medium in the presence of an anthraquinone (AQ) catalyst. The addition of AQ increases the yield of low-molecular-weight products by a factor of 1.8. Semiempirical formulas have been derived for incompletely hydrolyzed lignin residues. A study of the molecular-weight distribution of these lignins has shown that they are polydisperse. It has been established that in the process of hydrogenolysis AQ promotes the demethoxylation of structural units with syringyl nuclei.Institute of the Chemistry of Plant Substances of the Uzbek SSR Academy of Sciences, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 734–738, September–October, 1987.     

Hydrogenolysis of rice husk protolignin. II

It has been established that the partial hydrogenolysis of rice husk protolignin (RHP) takes place at a temperature of 180°C and an initial hydrogen pressure of 10 atm in an alkaline medium. Conditions have been selected under which the greatest yield of low-molecular-weight products (91% on the Komarov lignin) is obtained: hydrogenolysis in an alkaline medium in the presence of an anthraquinone (AQ) catalyst. The addition of AQ increases the yield of low-molecular-weight products by a factor of 1.8. Semiempirical formulas have been derived for incompletely hydrolyzed lignin residues. A study of the molecular-weight distribution of these lignins has shown that they are polydisperse. It has been established that in the process of hydrogenolysis AQ promotes the demethoxylation of structural units with syringyl nuclei.     

Hydrogenolysis of rice husk lignin. IV

The hydrogenolysis of rice husk protolignin and of rice husk hydrolysis lignin in the presence of catalyst D-101, which is used in the hydrocracking of petroleum, has been studied. A substantial amount of products with syringyl structures has been found in the lignin cleavage products. The hydrogen content of the hydrol lignins isolated was considerably higher than that of the analogous lignins obtained on hydrogenolysis with the use of other catalysts.Institute of the Chemistry of Plant Substances, Academy of Sciences of the Republic of Uzbekistan. Scientific-Research Chemical and Technical Institute of the Medical and Microbiological Industry, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 602–605, July–August, 1993.     

Hydrogenolysis of rice husk lignin. IV

The hydrogenolysis of rice husk protolignin and of rice husk hydrolysis lignin in the presence of catalyst D-101, which is used in the hydrocracking of petroleum, has been studied. A substantial amount of products with syringyl structures has been found in the lignin cleavage products. The hydrogen content of the hydrol lignins isolated was considerably higher than that of the analogous lignins obtained on hydrogenolysis with the use of other catalysts. Institute of the Chemistry of Plant Substances, Academy of Sciences of the Republic of Uzbekistan. Scientific-Research Chemical and Technical Institute of the Medical and Microbiological Industry, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 602–605, July–August, 1993.     

Hydrogenolysis of lignins

Applied Biochemistry and Biotechnology - Hydrolytic eucalyptus lignin was converted to oils by hydrogenolysis. The lignin was obtained by acid hydrolysis of eucalyptus chips from two...     

Hydrogenolysis of lignins : nickel boride catalyst

Nickel boride generated within the wood structure allows the selective hydrogenolysis of wood meals. 4-n-Ethylguaiacol and 4-n-Ethylsyringol are prepared with interesting yields.     

Hydrogenolysis of the protolignin from rice husks. III

The hydrogenolysis of the protolignin of rice husks in the presence of a polymetallic catalyst that is used in the hydrocracking of petroleum has been investigated. The dependence of the yield of low-molecular-mass compounds on the reaction conditions has been found. It has been established on the basis of experiments with model compounds that on hydrogenolysis with the use of the polymetallic catalyst both alkyl-aryl C-O-C and C-C bonds are cleaved.Institute of Chemistry of Plant Substances, Academy of Science of the Uzbek SSR, Tashkent. All-Union Scientific-Research Chemical and Technological Institute of the Medicinal and Microbiological Industry, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 679–683, September–October, 1990.     

Investigation of thermal decomposition of rice husk

Studies on the thermal decomposition of untreated rice husk and that treated with HCl and H₂SO₄ of various concentrations were carried out by TG, DTG and DTA. The mass loss occurred in three distinct stages, namely, removal of moisture, release of volatile matter and burning of combustible material. The corresponding temperature ranges for untreated husk were 40–150, 215–350 and 350–690°C. The final temperature of combustion decreased with acid-treatment of the husk. The thermal decomposition of the husk was found to be an exothermic process.     

Hydrogenolysis of the protolignin from rice husks. III

The hydrogenolysis of the protolignin of rice husks in the presence of a polymetallic catalyst that is used in the hydrocracking of petroleum has been investigated. The dependence of the yield of low-molecular-mass compounds on the reaction conditions has been found. It has been established on the basis of experiments with model compounds that on hydrogenolysis with the use of the polymetallic catalyst both alkyl-aryl C-O-C and C-C bonds are cleaved. Institute of Chemistry of Plant Substances, Academy of Science of the Uzbek SSR, Tashkent. All-Union Scientific-Research Chemical and Technological Institute of the Medicinal and Microbiological Industry, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 679–683, September–October, 1990.     

Crystallite growth of rice husk ash silica

The effect of temperature of firing and time of annealing on crystallite size of silica obtained by burning boiled rice husk was studied by the X-ray broadening technique. The results showed that nuclei of disordered cristobalite were present in ash silica, and crystallite growth was governed by two processes, namely nucleation and growth taking place simultaneously with a rate varying with the temperature of treatment. The nucleation process manifested itself in the low temperature range of 800–900°C, while growth was more pronounced in the temperature range 1000–1100°C, occurring with different activation energies of 81.3 and 52.4 cal mole^?1, respectively. Both processes occurred with the same intensity at 964°C. A growth process and crystal perfection followed with an activation energy of 36.8 cal mole^?1.     

Bismaleimide/rice husk silica reinforced composites

Silica derived from the renewable resource rice husk is modified using stearic acid and N-[4-(chlorocarbonyl)phenyl]maleimide. These materials are used as fillers in the bismaleimide, 4,4′-bismaleimidodiphenylmethane (BMIM), and thermally cured. The thermogravimetric (TG) curves for polyBMIM/silica composites showed no pronounced changes compared to the TG curve for the pure polyBMIM. Kissinger–Akahira–Sunose, Flynn–Wall–Ozawa, and Friedman methods are used to compute the activation energy (E _a) for degradation. Silica and surface-modified silica using stearic acid dispersed by ultrasonication increase the activation energy for degradation and show considerable influence on the thermal stability of cured BMIM. The long alkyl chain present in the stearic acid modified silica and the bulky spacer present in the chemically modified silica definitely alter the degradation process of cured BMIM. The SEM studies indicated uniform dispersion of the silica particles in the polyBMIM.     

Composition and properties of polysaccharides from rice husk

The composition and content of polysaccharides obtained from different samples of rice husk by successive treatment with water, ammonium oxalate (or oxalic acid), and alkali were studied. The chemical composition of the rice husk residues after the extraction was examined, and the possibility of their use for preparing amorphous silica or cellulose-containing products, depending on the hydrolysis conditions, was assessed.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 11, 2004, pp. 1901–1904.Original Russian Text Copyright © 2004 by Zemnukhova, Tomshich, Mamontova, Komandrova, Fedorishcheva, Sergienko.     

Iron incorporated heterogeneous catalyst from rice husk ash

Silica supported iron catalyst was prepared from rice husk ash (RHA) via the sol-gel technique using an aqueous solution of iron(III) salt in 3.0 M HNO3. The sample was dried at 110 degrees C and labeled as RHA-Fe. A sample of RHA-Fe was calcined at 700 degrees C for 5 h and labeled as RHA-Fe700. X-ray diffraction spectrogram showed that both RHA-Fe and RHA-Fe700 were amorphous. The SEM/EDX results showed that the metal was present as agglomerates and the Fe ions were not homogeneously distributed in RHA-Fe but RHA-Fe700 was shown to be homogeneous. The specific surface areas for RHA-Fe and RHA-Fe700 were determined by BET nitrogen adsorption studies and found to be 87.4 and 55.8 m(2) g(-1), respectively. Both catalysts showed high activity in the reaction between toluene and benzyl chloride. The mono-substituted benzyltoluene was the major product and both catalysts yielded more than 92% of the product. The GC showed that both the ortho- and para-substituted monoisomers were present in about equal quantities. The minor products consisting of 16 di-substituted isomers were also observed in the GC-MS spectra of both catalytic products. The catalyst was found to be reusable without loss of activity and with no leaching of the metal.     

Trace element evaluation of rice and husk by INAA

An instrumental neutron activation analysis technique has been utilized to study the prevailing levels of certain inorganic trace elements in different varieties of rice produced in Pakistan. The data have been compared with those of other countries. The elemental ratios within rice and rice to husk have been computed to evaluate indirectly the impact of soil and environment on the rice crops. The dietary spectum for the inhabitants of Rawalpindi/Islamabad areas has been evaluated by estimating the daily intake and comparing with allowances suggested in the literature.     

Preparation and characterization of rice husk/ferrite composites

<正>A novel ferrite composite using rice husk as substrate has been prepared via high temperature treatment under nitrogen atmosphere.The rice husk substrate consists of porous activated carbon and silica,where spinel ferrite particles with average diameter of 59 nm are distributed.The surface area of the composite is greater than 170 m~2 g~(-1) and the bulk density is less than 0.6 g cm~(-3).Inert atmosphere is indispensable for the synthesis of pure ferrite composites,while different preparation temperatures of above 600℃result in composites with similar structures and morphologies.Due to the presence of ferrite particles,this novel composite shows enhanced adsorption ability for acid orangeⅡ.