液相色谱-质谱法分析黑碳的分子标志物——苯多羧酸和硝基苯多羧酸

苯多羧酸法是定量检测黑碳和溶解态黑碳的重要分子标志物法,其中苯多羧酸和硝基苯多羧酸的分离和定量是关键环节。本文建立了苯多羧酸和硝基苯多羧酸的液相色谱-质谱分析方法,利用质谱的定性能力解决了部分苯多羧酸和硝基苯多羧酸化合物在缺乏标准品情况下的定性问题。用Phenomenex Synergi Polar RP分离柱,柱温为35 ℃,流动相为0.5%(体积分数)甲酸水溶液和甲醇,流速为0.5 mL/min,梯度洗脱,以电喷雾离子源负离子全扫描和选择扫描模式进行离子阱质谱检测,同时利用串联的二极管阵列检测器采集三维紫外光谱数据。在实际样品检测中,14个含3个及以上羧基的苯多羧酸和硝基苯多羧酸化合物获得良好分离。此方法简化并加快了苯多羧酸法定量黑碳和溶解态黑碳的分析过程,可满足环境样品中黑碳和溶解态黑碳的分析,促进了苯多羧酸法应用的普及。     

Determination of thorium in zirconium-hafnium mixtures by aromatic polycarboxylic acids

Summary Results are presented for 1,3,5-benzenetricarboxylic (trimesic), 1,2,4-benzenetricarboxylic (trimellitic) and 1,2,4,5-benzenetetracarboxylic (pyromellitic) acids as precipitants for thorium. Trimesic and pyromellitic acids have been found to be better reagents than trimellitic acid. Thorium and zirconium-hafnium mixtures can be separated by precipitating zirconium-hafnium first in 0.5–0.8 N acid solution and then precipitating thorium in the filtrate at 3–4 pH. The separations are quite reproducible. The precipitates in all cases are ignited to the respective oxides. 5–10 mg samples of thorium can be estimated and separated from 10–50 mg samples of zirconium and/or hafnium. Results of investigations on interferences of cations and anions and pyrolysis curves for the decomposition of precipitates are presented.

---

Zusammenfassung Als Fällungsmittel fÜr Thorium wurden 1,3,5-Benzoltricarbonsäure (Trimesinsäure), 1,2,4,5-Benzoltetracarbonsäure (Pyromellitsäure) und 1,2,4-Benzoltricarbonsäure (Trimellitsäure) untersucht, wobei die beiden ersten sich als gÜnstiger erwiesen haben. Gemische von Thorium und Zirkonium/Hafnium kÖnnen getrennt werden, indem man zuerst Zr/Hf in 0,5–0,8 n saurer LÖsung fällt und anschlie\end Thorium aus dem Filtrat bei pH 3–4 niederschlägt. Die Trennung ist gut reproduzierbar. Die Niederschläge werden jeweils zu den entsprechenden Oxiden verglÜht. 5–10 mg Th kÖnnen von 10–50 mg Zr und/oder Hf getrennt werden. StÖrungen durch andere Kationen und Anionen wurden untersucht und Pyrolysekurven fÜr die Zersetzung der Niederschläge aufgestellt.

     

Synthesis of light-sensitive arenesulfonylazido polycarboxylic acids

Several light-sensitive arenesulfonylazido polycarboxylic acids were synthesized by a one-step reaction of a polymeric anhydride with a light-sensitive monofunctional alcohol, or by the reverse reaction, i.e., reaction of a polymeric alcohol with a light-sensitive monofunctional anhydride. The polycarboxylic acids are soluble in polar organic solvents and in aqueous base. Neutralization of part of the carboxyl groups gives rise to the formation of water-soluble polymers. Coreaction of poly(maleic anhydride-co-methyl vinyl ether) with 2-hydroxyethyl 4-sulfonylazidocarbanilate and 2-hydroxyethyl trans-2,5-dimethoxystilbene-4′-carbamate produces a light-sensitive polycarboxylic acid with “built-in” sensitizer.     

The thermodynamics of ionization of polycarboxylic acids

Thermodynamic parameters for the successive ionizations of a number of monomeric polycarboxylic acids have been determined from a temperature-dependence study of the ionization constants calculated from potentiometric data obtained using cells without liquid junction. Specifically the acids are: 1,2,3-propanetri-; 1,2,3,4-butanetetra-; 1,3-benzenedi-; 1,2,3-, 1,2,4-, and 1,3,5-benzenetri-; 1,2,4,5-benzenetetra-; and 1,2,3,4,5,6-benzenehexacarboxylic acids. The data are critically discussed in terms of the common models of ionization and of reactivity effects of substituents on ionization for monomeric and polymeric polybasic acids.Abstracted from M.B.T.'s doctoral disseration, Oklahoma State University, May 1972. Copies of the computer programs and directions for their use will be available from University microfilms.     

Synthesis of amino polycarboxylic acids of the adamantane series

The Ritter reaction of dibasic carboxylic acids of the adamantane series with carboxy and carboxymethyl groups attached to bridgehead carbon atoms afforded a number of amino polycarboxylic acids.     

Infrared spectroscopy studies of the cyclic anhydride as the intermediate for the ester crosslinking of cotton cellulose by polycarboxylic acids. II. Comparison of different polycarboxylic acids

Polycarboxylic acids have been used as crosslinking agents for cotton cellulose. In our previous research, we used Fourier transform infrared (FT-IR) spectroscopy to investigate the formation of five-membered cyclic anhydride intermediates on cotton fabric by different polycarboxylic acids. In this research, we found that those polycarboxylic acids capable of forming both five- and six-membered cyclic anhydrides form only five-membered cyclic anhydrides. We compared the effectiveness of the polycarboxylic acids with different molecular structures for esterifying cellulose. Those polycarboxylic acids, which have their carboxyl groups bonded to the adjacent carbons of their molecular backbones and are capable of forming five-membered cyclic anhydrides, are more effective for esterifying cellulose than those polycarboxylic acids having their carboxyl groups bonded to the alternative carbons. The only six-membered cyclic anhydride identified is the anhydride formed on the cotton fabric treated with poly(acrylic acid). © 1996 John Wiley & Sons, Inc.     

The solubilities of benzene polycarboxylic acids in water

The solubilities in water of all benzene polycarboxylic acids are discussed, using data determined in this work (benzoic, terephthalic, trimellitic, trimesic, and pyromellitic acids) and available from the literature (benzoic, phthalic, isophthalic, terephthalic, hemimellitic, trimelitic, trimesic, mellophanic, prehnitic, pyromellitic, benzene-pentacarboxylic and mellitic acids). The apparent molar enthalpies of solution at the saturation point for these benzene polycarboxylic acids were determined from the temperature dependence of the solubilities.     

Simultaneous determination of polycarboxylic acids by capillary electrophoresis with a copper electrode

The simultaneous determination of polycarboxylic acids including oxalic acid, citric acid, malonic acid, malic acid, tartaric acid, aspartic acid and glutamic acid was achieved by capillary electrophoresis with a copper disk electrode (d = 200 microm). In the system. 0.2 mmol/l cetylpridinium bromide (CPB) was used as an electroosmotic flow (EOF) modifier to reverse the direction of EOF. The effects of the solution pH and CPB concentration on separation were evaluated to achieve the optimum separation conditions. At the working potential of +0.14 V (vs. saturated calomel electrode), the calibration curves for all polycarboxylic acids studied were linear with 2 approximately 3-orders of magnitude and all the detection limits (S/N = 3) were below 15 fmol except malonic acid. Furthermore, the oxalic and citric acids in urine were successfully separated and determined with high sensitivity.     

Pb(II) sorption onto gamma-Al2O3 surfaces at the oxide-water interface: a novel approach using planar oxides

A novel technique for examining metal-ion interactions at the solid-water interface is introduced. Planar oxides, flat, thin coatings of uniform thickness created on a metal support, have been constructed as useful analogs for investigating metal-solid interactions under a variety of conditions. XPS and ToF/SIMS results from sorption studies at pH 6.0 show that the sorption behavior of Pb on each phase is similar with Pb binding preferentially to the bulk gamma-Al(2)O(3). This may be due to the presence of defect sites on the bulk oxides, the preferential exposure of a specific crystallographic plane in the planar oxides, or it may be an artifact of instrumental analysis. A second study examining Pb sorption to planar gamma-Al(2)O(3) under a series of increasingly complex conditions shows that our methods are able to successfully characterize sorption complexes formed in the presence of environmentally derived complexants. Results suggest that Pb is more strongly complexed by aqueous phase organic matter than sediment-bound organic material, indicating a possible control on Pb sorption in natural environments. Overall, the use of planar oxides combined with a powerful suite of spectroscopic tools provides a promising approach to better understanding metal ion sorption to natural sediment surfaces in aquatic environments.     

Ruthenium-promoted reductive transformation of CO_2

The reductive transformation of CO_2 to energy related products including formic acid, CO, formamide, methanol and methylamine could be a promising option to supply renewable energy. In this aspect, ruthenium has found wide application in hydrogenation of various carbonyl groups, and has successfully been applied to reductive transformation of CO_2 with high catalytic efficiency and excellent selectivity. In addition, ruthenium complexes have also served as effective photosensitizers for CO_2 photoreduction.Classified by reductive products, this review summarizes and updates advances in the Ru-catalyzed reduction of CO_2 along with catalyst development on the basis of mechanistic understanding at a molecular level.     

The role of polycarboxylic acids in calcium phosphate mineralization

The role of two polyelectrolytes, poly-L-glutamate and poly-L-aspartate, in the growth of calcium phosphate crystal phases, has been investigated at constant supersaturation. Both molecules are strong inhibitors of HAP growth when present in the solution phase but also act as hydroxyapatite and (octacalcium phosphate)-like crystal nucleators when adsorbed on germanium surfaces. The structure of the polymers in solution is presented and various adsorption models are analyzed. A "train-loop" structure of these long, flexible chain polymers on the crystal surface is consistent with all the adsorption (experimental and theoretical), inhibition, and electrophoretic mobility results.     

Capillary electrochromatographic analysis of aliphatic mono- and polycarboxylic acids

The parameters influencing the electrochromatographic separation of aliphatic organic acids in a capillary column with a wall-coated macrocyclic polyamine have been studied. Indirect detection using chromate, pyromellitate, trimellitate, o-phthalate, benzoate and acetate as background electrolytes has been tested. A complete separation of polyprotic acids could be achieved with pyromellitate buffer (7.5 mM, pH 6.5), and satisfactory results for the simultaneous separation of monoprotic acids and polyprotic acids were found using a capillary column of 70 cm (50 cm effective length)x75 microm inner diameter, electrokinetic injection (-10 kV, 10 s), benzoate buffer (6 mM, pH 4.6), separation voltage of -10 kV, and detection at 220 nm. For the separation of the geometric isomers fumarate and maleate, acetate buffer was found the best choice among the background electrolytes tested. The method so established has been applied to the determination of organic acids in soy sauce, brandy, lemon juice, spinach juice and cigarette. From the retention behavior, it was found that the separation mechanism on the bonded phase was influenced by the macrocyclic effect, electrostatic attraction, hydrogen bonding, van der Waals forces, and anion exchange, in addition to the differences in electrophoretic mobility.     

Biodetergent IV. Monolayers of corynomycolic acids at the air-water interface

The effects of alkyl chain length and of differences in the length of the two alkyl chains on the formation of a monolayer of chemically synthesized corynomycolic acid (2-alkyl-3-hydroxy fatty acid) at the air-water interface were examined. Hydrophobic interactions between the two alkyl chains are required for the formation of a condensed film, which is most stable when the total number of carbon atoms in the two alkyl chains is 25 or more and the difference in their lengths is one. Syn-isomers form condensed films but usually not anti-isomers. However, films may also be formed by the anti-isomer when the alkyl chain at the carboxy group (the 2-position) is longer than the alkyl chain at the hydroxy group (the 3-position). That is, the contribution of anti-isomers to condensed film formation depends on the polar carboxy group which has greater involvement in this formation. The extrapolated area for the condensed film of corynomycolic acid was 40 Ų per molecule, thus confirming that both the carboxy and hydroxy groups are present on the water surface when a bipolar monolayer is formed.     

Adsorption of alpha amino acids at the water/goethite interface

The adsorption of amino acids onto mineral surfaces plays an important role in a wide range of areas, e.g., low-temperature aqueous geochemistry, bone formation and protein-bone interactions. In this work, the adsorption of three alpha aminoacids (sarcosine, MIDA and EDDA) onto goethite (alpha-FeOOH) was studied as a function of pH and background electrolyte concentration at 25.0 degrees C, and the molecular structures of the surface complexes formed were analyzed by means of ATR-FTIR spectroscopy. The results showed that adsorption of alpha amino acids were strongly dependent on the functionality and structure of the ligands. No adsorption was detected for the zwitterionic sarcosine indicating that simple alpha amino acids without other ionizable and/or functional groups display insignificant affinity for mineral surfaces such as goethite. With respect to the more complex amino acids, which are surface reactive, the number and relative positions of carboxylate and amine groups determine the types of surface interactions. These interactions range from non-specific outer-sphere to specific inner-sphere interactions as shown by the MIDA and EDDA results, respectively. The results presented herein suggest that isomerically-selective adsorption might only occur for amino acids that are capable of specific surface interactions, either through site-specific hydrogen bonding or inner-sphere complexation.     

Identification and quantification of cotton-bound,cyclic polycarboxylic acids by means of isocratic HPLC

Cotton fabrics are modified by means of polycarboxylic acids (PCA) in combination with an inorganic catalyst in order to impart durable press properties. To evaluate the effectiveness of cyclic PCA, 100% cotton fabrics were treated with 1,2,3,4,5,6-cyclohexanehexacarboxylic acid (CH-HCA), 1,3,5-cyclohexanetricarboxylic acid (CH-TCA), 1,2,3,4-cyclopentanetetracarboxylic acid (CP-TCA), and 1,2,3,4-tetrahydrofurantetracarboxylic acid (THF-TCA) in combination with sodium hypophosphite (SHP) as catalyst. The amount of PCA that reacted with the cellulosic material was determined by means of isocratic HPLC (Aminex HPX-87-H). The results clearly indicate that the cyclic PCA are less effective in respect of durable press performance. CH-TCA does not react with the cellulosic material thus confirming the assumption that the crosslinking reaction between PCA and the cellulose proceeds via a five-membered cyclic anhydride.     

Calculation of water-exchange rates on aqueous polynuclear clusters and at oxide-water interfaces

The rates of a wide variety of reactions in aqueous coordination compounds can be correlated with lifetimes of water molecules in the inner-coordination shell of the metal. For simple octahedral metal ions, these lifetimes span approximately 1020 but are unknown, and experimentally inaccessible, for reactive sites in interfacial environments. Using recent data on nanometer-sized aqueous aluminum clusters, we show that lifetimes can be calculated from reactive-flux molecular dynamics simulations. Rates scale with the calculated metal-water bond lengths. Surprisingly, on all aluminum(III) mineral surface sites investigated, waters have lifetimes in the range of 10-8-10-10 s, making the surface sites as fast as the most reactive ions in the solution.     

Apparent dissociation constants of polycarboxylic acids in presence of polycations

The dissociation behaviour of poly(acrylic acid) and poly(ethylene-alt-maleic acid) has been investigated by both classical potentiometric titration and colloid titration as an alternative way. In the case of colloid titration, the monovalent counterions are assumed to be replaced by the oppositely charged polycation in the course of titration, so that the total concentration of anionic groups of the polycarboxylic acid is determined. As a consequence the apparent dissociation constants determined by polyelectrolyte complex formation do not depend on the degree of dissociation. In contrast to this finding, potentiometric titration is known to result in apparent dissociation constants which decrease with increasing degree of dissociation. The release of protons from the acid groups of the polycarboxylic acids is promoted by the complex formation with the strong cationic polyelectrolyte.     

Single-step thioetherification by indium-catalyzed reductive coupling of carboxylic acids with thiols

Direct thioetherification from a variety of aromatic carboxylic acids and thiols using a reducing system combined with InBr(3) and 1,1,3,3-teramethyldisiloxane (TMDS) in a one-pot procedure is demonstrated. It was also found that a system combined with InI(3) and TMDS underwent thioetherification of aliphatic carboxylic acids with thiols.