Chromatographic behaviour of homologous amines: Comparison of derivatizing agents,columns and mobile phases

Summary The liquid chromatographic behaviour of aliphatic mono- and polyamines belonging to different homologous series has been investigated using various pre-column derivatizing agents (OPA and CNB), mobile phases (water-MeOH and water-ACN), RP columns (different packing sizes and shapes) and detectors (UV and fluorescence) in order to characterize the different contributions to retention and the different selectivities under the conditions investigated. The parameters derived allowed computation of capacity factors in good agreement with experiments. The chromatographic method optimized with respect to OPA derivatization has been successfully utilized for the determination of putrescine, cadaverine and 2-phenyl-ethylamine in cheese samples under different ageing conditions.     

Application of the novel 5-chloro-2,2,3,3,4,4,5,5-octafluoro-1-pentyl chloroformate derivatizing agent for the direct determination of highly polar water disinfection byproducts

A novel derivatizing agent, 5-chloro-2,2,3,3,4,4,5,5-octafluoropentyl chloroformate (ClOFPCF), was synthesized and tested as a reagent for direct water derivatization of highly polar and hydrophilic analytes. Its analytical performance satisfactorily compared to a perfluorinated chloroformate previously described, namely 2,2,3,3,4,4,5,5-octafluoropentyl chloroformate (OFPCF). The chemical properties (reactivity, selectivity, derivatization products, and their chromatographic and spectral features) for ClOFPCF were investigated using a set of 39 highly polar standard analytes, including, among others, hydroxylamine, malic and succinic acids, resorcinol, hydroxybenzaldehyde, and dihydroxybenzoic acid. Upon derivatization, the analytes were extracted from the aqueous solvent and analyzed by gas chromatography (GC)-mass spectrometry (MS) in the electron-capture negative ionization (ECNI) mode. Positive chemical ionization (PCI)-MS was used for confirming the molecular ions, which were virtually absent in the ECNI mass spectra. ClOFPCF showed good reaction efficiency, good chromatographic and spectroscopic properties (better than with OFPCF), good linearity in calibration curves, and low detection limits (0.3–1 μg/L). A unique feature of the derivatizations with ClOFPCF, and, in general, highly fluorinated chloroformates, is their effectiveness in reacting with carboxylic, hydroxylic, and aminic groups at once, forming multiply-substituted non-polar derivatives that can be easily extracted from the aqueous phase and determined by GC-ECNI-MS. The entire procedure from raw aqueous sample to ready-to-inject hexane solution of the derivatives requires less than 10 min. Another benefit of this procedure is that it produced stable derivatives, with optimal volatility for GC separation, and high electron affinity, which allows their detection as negative ions at trace level. In addition, their mass spectra exhibits chlorine isotopic patterns that clearly indicate how many polar hydrogens of the analyte undergo derivatization. Finally, derivatization with ClOFPCF was used successfully to identify 13 unknown highly polar disinfection byproducts (DBPs) in ozonated fulvic and humic acid aqueous solutions and in real ozonated drinking water.     

Resin-bound chiral derivatizing agents for assignment of configuration by NMR spectroscopy

A general methodology for assigning the configuration of chiral mono- and polyfunctional compounds by NMR is presented. The approach is based on the use of polystyrene-bound chiral derivatizing agents (CDA-resins) specifically designed to achieve the high-yield formation of the covalent linkages (amide or ester bonds) between the substrate and the chiral auxiliary within the NMR tube, without the need for other manipulations, on a microscale level and in a short time. The deuterated NMR solvents (CDCl3, CD3CN, CS2/CD2Cl2) are also the reaction solvents and separations, purifications or workups of any kind are not necessary prior to recording the spectra. The CDA-resins prepared included MPA, 9-AMA, BPG, MTPA, and 2-NTBA as auxiliary agents incorporated either as single enantiomers or as mixed combinations of the (R)- and the (S)-enantiomers at unequal and known ratios. The high versatility of these systems was successfully demonstrated in a variety of ways based on double and single derivatization, low temperature experiments, or the formation of metal complexes. The approach allowed the absolute configurations of chiral primary amines, primary and secondary alcohols, cyanohydrins, thiols, diols, triols, and amino alcohols to be determined. Extensive high-resolution magic angle spinning (HR-MAS) NMR experiments allowed the characterization of the new CDA-resins and enabled the study of their stability and regioselectivity.     

Gas chromatography of epinephrine and norepinephrine after derivatization with chloroformates in aqueous media

Optimal conditions for the reaction of alkyl chloroformates with epinephrine and norepinephrine in aqueous solution have been evaluated. The maximal yield with 0.06 M methyl chloroformate was in the pH range 7.0–8.5. The derivatives formed are isolated by extraction with methylene chloride and gas chromatographed on 3% QF-1 with a nitrogen-selective detector after trimethylsilylation of the alcohol group.     

Polymers as advanced antibacterial and antibiofilm agents for direct and combination therapies

The growing prevalence of antimicrobial drug resistance in pathogenic bacteria is a critical threat to global health. Conventional antibiotics still play a crucial role in treating bacterial infections, but the emergence and spread of antibiotic-resistant micro-organisms are rapidly eroding their usefulness. Cationic polymers, which target bacterial membranes, are thought to be the last frontier in antibacterial development. This class of molecules possesses several advantages including a low propensity for emergence of resistance and rapid bactericidal effect. This review surveys the structure–activity of advanced antimicrobial cationic polymers, including poly(α-amino acids), β-peptides, polycarbonates, star polymers and main-chain cationic polymers, with low toxicity and high selectivity to potentially become useful for real applications. Their uses as potentiating adjuvants to overcome bacterial membrane-related resistance mechanisms and as antibiofilm agents are also covered. The review is intended to provide valuable information for design and development of cationic polymers as antimicrobial and antibiofilm agents for translational applications.

This review surveys the structure–activity of advanced antimicrobial cationic polymers with low toxicity and high selectivity. Their uses as potentiating adjuvants and as antibiofilm agents are also covered.     

Use of participant EQA results to assess sample homogeneity and stability for qualitative analytes

International requirements for PT and EQA state that providers must demonstrate that samples are homogeneous and stable. However, testing for homogeneity and stability can be expensive, use samples that could otherwise serve as quality-control materials, and can also fail to detect significant inhomogeneity and instability. In some situations it may be preferable to use the results from participants to identify problems with sample lots, if historic results follow predictable distributions and a statistical decision rule can be produced. An unusually high proportion of incorrect results may indicate that samples were inhomogeneous or unstable. Conditions under which this can be demonstrated are discussed, and the efficacy of the proposal is demonstrated with two examples. This procedure is especially effective when there are a large number of participants and/or a historic small proportion of incorrect results. Providers who adopt this proposal will need to retain samples for testing and assume the risk of distributing bad samples.Presented at the Eurachem PT Workshop September 2005, Portorož, Slovenia     

A heated electrospray source for mass spectrometry of analytes from aqueous solutions

An electrospray interface is described that provides high sensitivity and signal stability for mass spectrometric detection of analytes in solvents with high water content including 100% water. The electrospray capillary tip section is heated close to the boiling point of the solvent. An approximately 20°C hotter airstream, with flow coaxial to the electrospray tip and codirectional to the electrospray.. is also used. With this arrangement, the analyte signal sensitivity and stability obtained with neat water is equal to that obtained with neat methanol. The heated electrospray also affords the use of a wide range of flow rates: 1–100 μL/min.     

Analytical study of proteinaceous binding media in works of art by gas chromatography using alkyl chloroformates as derivatising agents

In this work, we present the results obtained in an analytical study of the different types of proteinaceous binding media most commonly used in paintings, using GC-FID as the technique of analysis and GC-MS as a confirmatory technique. The application of this methodology requires prior hydrolysis of the proteins in the binding media to obtain free amino acids and then volatile derivatives, in this case by reaction with chloroformates due to advantages of speed, safety and the aqueous medium in which the reaction occurs. The method proposed for the proteinaceous binding media study is to calculate the proportions of the different amino acids with respect to alanine. This method provided good characterisation of different binding media, such as pork gelatine, beef gelatine, albumin, egg white and casein. The proposed method is used for the identification of binding media (including mixtures of binders) present in real samples from paintings in the city of Valencia, Spain.     

5-Amino-4-aryl-2,2-dimethyl-1,3-dioxans: application as chiral NMR shift reagents and derivatizing agents for acidic compounds

The use of (4S,5S)-5-amino-2,2-dimethyl-4-phenyl-1,3-dioxan (ADPD) and (4R,5R)-5-amino-(4′-biphenyl)-2,2-dimethyl-1,3-dioxan (ABDD) as chiral solvating agents (CSA) for the ee determination of compounds bearing an acidic proton by means of ¹H NMR spectroscopy is demonstrated. In addition, based on the well known rigid conformation of these amines, ADPD and ABDD are suitable as chiral derivatizing agents (CDAs) in order to determine absolute configurations.     

Determination of polar analytes in aqueous matrices by purge and trap

(not readable) fully autimated purge and trap system has been developed for (not readable) detemination of volatile wine components. The proposed system consists of sampler, a purge and trap instrument, and a GC, (not readable) steps, from the uptake of the infiltrated wine from the sampler (not readable) to the printout of the intergrated chromatograms, proceed(not readable), Typical problems occurring when analyzing polar analytes by the classical purse and trap approach have been specifically addressed. The system has been desiggned to handle such difficult (not readable) analytes. Efforts have been made to improve the reproducibility and the carry-over of these analytes. The measures adopted include: thorough rinsing and subsequent conditioning of the P + T parger; elimination of matrix effects by dilution and high salt (not readable); tight specification of purge relevant parameters; split-inter-(not readable) to improve GC retention time reproducibility.     

Comparison of the adsorption mechanisms of pyridine in hydrophilic interaction chromatography and in reversed-phase aqueous liquid chromatography

The adsorption isotherms of pyridine were measured by frontal analysis (FA) on a column packed with shell particles of neat porous silica (Halo), using water–acetonitrile mixtures as the mobile phase at 295 K. The isotherm data were measured for pyridine concentrations covering a dynamic range of four millions. The degree of heterogeneity of the surface was characterized by the adsorption energy distribution (AED) function calculated from the raw adsorption data, using the expectation-maximization (EM) procedure. The results showed that two different retention mechanisms dominate in Per aqueous liquid chromatography (PALC) at low acetonitrile concentrations and in hydrophilic interaction chromatography (HILIC) at high acetonitrile concentrations. In the PALC mode, the adsorption mechanism of pyridine on the silica surface is controlled by hydrophobic interactions that take place on very few and ultra-active adsorption sites, which might be pores on the irregular and rugose surface of the porous silica particles. The surface is seriously heterogeneous, with up to five distinct adsorption sites and five different energy peaks on the AED of the packing material. In contrast, in the HILIC mode, the adsorption behavior is quasi-homogeneous and pyridine retention is governed by its adsorption onto free silanol groups. For intermediate mobile phase compositions, the siloxane and the silanol groups are both significantly saturated with acetonitrile and water, respectively, causing a minimum of the retention factor of pyridine on the Halo column.     

Comparison of two derivatizing agents for the simultaneous determination of selenite and organoselenium species by gas chromatography and atomic emission detection after preconcentration using solid-phase microextraction

Two methods for the simultaneous determination of selenite and two organoselenium compounds, dimethylselenide (DMSe) and dimethyldiselenide (DMDSe), are proposed. Both methods involve sample preconcentration by solid-phase microextraction (SPME) and capillary gas chromatography coupled to atomic emission detection (GC-AED). The main difference between the methods is the derivatizing agent used to complex the inorganic species: sodium tetraethylborate and 4,5-dichloro-1,2-phenylenediamine. The parameters affecting the derivatization and preconcentration steps, chromatographic separation as well as detection of the compounds were optimized. Direct immersion (DI) mode and a relatively long extraction time were selected for the method involving the formation of the piazselenol complex, better sensitivity being achieved for the three analytes under study. In this case, detection limits ranged between 3 and 25 ng L(-1), depending on the compound. Headspace mode (HS) and extraction times of 20 min were selected for the method involving tetraalkylborate, and detection limits of between 7.3 and 55 ng L(-1) were obtained. DMSe and Se(IV) were found in several of the water samples analyzed at concentrations of 0.07-1.0 ng mL(-1).     

Towards aqueous chiral heptadentate lanthanide complexes as selective shift and relaxation agents for MRS

Magnetic resonance spectroscopy (MRS) is of prime importance in diagnostics and offers a means of analyzing, in vivo, the chemical content of living tissue, as a non-invasive alternative to biopsy. Several heptadentate, lanthanide complexes have been synthesized and their potential to act as shift and relaxation agents in MRS (for lactate, in particular) has been assessed through (1)H NMR analysis. The binding affinity and enantiopurity of the complexes have been modulated by systematic variation of the lanthanide ion and ligand structure, in particular the peripheral electrostatic charge of the complex (cationic versus neutral) and the local charge and steric demand at the metal centre.     

The derivatization of fatty acids by (chloro)alkyl chloroformates in non-aqueous and aqueous media for GC analysis

Fatty acids can be conveniently derivatized in less than one minute with (chloro)alkyl chloroformates such as methyl chloroformate, 2-chloroethyl chloroformate and 2,2,2-trichloroethyl chloroformate. 2,2,2-Trichloroethyl chloroformate is the most reactive reagent, and yields a reaction product which can be sensitively detected by GC ECD (detection limit 50 ng/ml, i.e. 25 pg/injection, for C⁸, C¹⁰, and C¹² acids). In non-aqueous media 3-picoline, N-methylpiperidine, and dimethylaminopyridine show catalytic activity comparable with that of pyridine and can, therefore, replace it. N-methylpiperidine is the best basic catalyst in aqueous media (i.e. media containing up to 40 % water).     

N-chlorophthalimide as a new oxidant for direct titrations in aqueous acetic acid medium

A stable new oxidimetric titrant, N-chlorophthalimide in anhydrous acetic acid, is proposed for direct titrations of a variety of simple and complex reductants such as As(III), Sb(III), Fe(II), ferrocyanide, iodide, ascorbic acid, hydroquinone, hydrazine, phenylhydrazine, benzhydrazide, isonicotinic acid hydrazide, semicarbazide, thiourea, aniline, phenol, oxine and its metal complexes, and anthranilic acid and its metal complexes.     

Fluorescent dendritic polymers and nanostructured coatings for the detection of chemical warfare agents and other analytes

Polyamidoamine (PAMAM) dendrimers of generations zero (G0) to four (G4), and a hyperbranched polyurea (HB‐PU), were functionalized with 1,5‐dansyl (1,5‐D), 2,5‐dansyl (2,5‐D), 2,6‐dansyl (2,6‐D) and nitrobenzofurazan (NBD) fluorophores that change their fluorescence emission wavelength in response to chemical environment, and the resulting dendritic polymers were characterized by MALDI‐TOF mass spectrometry, ¹H NMR, ¹³C NMR, and fluorescence spectroscopy. Fluorophore‐functionalized dendritic polymers were then reacted further with 3‐acryloxypropyldimethoxymethylsilane (AOP‐DMOMS) at various fluorophore to DMOMS substitution ratios. The resulting materials were cast onto glass slides, and cured into robust nanostructured coatings. Coatings with 50% fluorophore–50% DMOMS substitution showed the strongest fluorescence and the best physical properties. Coated coupons were tested against a wide range of analytes including the chemical warfare agent simulants dimethyl methylphosphonate (DMMP) and chloroethylethylsulfide (CEES), and the water‐methanol‐ethanol series. It was found that the ability of the coatings to distinguish between analytes decreased with increasing cross‐link density for both dendrimer and hyperbranched polymer‐based coatings. It was also found that the percent fluorophore substitution and the type of dendritic polymer carrying the fluorophore had no significant effect upon fluorescence emission wavelength, but fluorescence emission wavelength became less dependent upon solvent with increasing dendrimer generation and molecular mass. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5101–5115, 2009     

2,6-Dimethyl-4-quinolinecarboxylic acid N-hydroxysuccinimide ester: a fluorogenic hydrophilic derivatizing reagent for liquid chromatographic analysis of aliphatic amines

The use of a fluorogenic, hydrophilic, and amine-reactive reagent, 2,6-dimethyl-4-quinolinecarboxylic acid N-hydroxysuccinimide ester (DMQC-OSu) has been investigated in the procolumn derivatization for the LC separation of aliphatic amines. In pH 8.0 aqueous medium, DMQC-OSu reacted with amines at 50 degrees C within 20 min to form highly fluorescent carboxamides and the excess reagent hydrolyzed to the corresponding carboxylic acid. The separation of representative amine derivatives with DMQC-OSu has been performed using a C18 column with the fluorescence detection at 326/409 nm. The detection limits reached nanomolar level. The proposed method has been applied to the analysis of real samples with recoveries of 94-108%. Compared with other succinimidyl esters used in the derivatization of amino compounds, DMQC-OSu and its hydrolysate had negligible fluorescence (phi(fl) = 0.09 and 0.02, respectively), which implied that small peaks appeared in chromatograms and slight interference was introduced to the determination.     

Use of photothermal deflection spectrometry (PDS) for studies of analytes in aqueous solutions

Summary A crossed-beam photothermal deflection spectrophotometer (PDS) instrument was built, evaluated and applied to the determination of lanthanide neodymium. A dye laser filled with rhodamine 6 G and pumped by an argon ion laser at 514 nm was operated with outputs between 4 and 500 mW at the cuvette position and chopped at 2 Hz. The deflection of a He-Ne probe laser beam, crossing the exciting dye laser, was measured by a two-dimensional position sensitive device and two lock-in amplifiers. The setup was evaluated with a solid carbon sample and the liquids toluene and Nd³⁺/HClO₄.A calibration curve for Nd³⁺ in HClO₄ was obtained and the limit of detection (LOD) for Nd³⁺ was determined to be 2·10^–6 mol/l. This LOD is, on the one hand, by 2 orders of magnitudes lower than the value obtained with the Cary 2400 spectrophotometer and, on the other hand, this transverse PDS technique is highly competitive to collinear thermal lensing and laser-induced photoacoustic spectroscopy.