Auto-oscillations in supersonic boundary layer

The production of periodic oscillations in a supersonic boundary layer at the moderate and high Mach numbers (M = 2 and 5.35) is investigated within the framework of the weakly nonlinear stability theory of the second order in nonlinearity. The model includes the effects of self-action, such as the generation of stationary secondary harmonics and the disturbances of double frequencies. It is shown that for two-dimensional vortex disturbances, the character of the excitation of vortex disturbances changes from the mild one to the stiff one with the increasing Mach number, which leads to a reduction of the critical Reynolds number Re_c. For three-dimensional disturbances of low azimuthal wave numbers, a supercritical auto-oscillatory regime sets in. A complex regime realizes for two-dimensional acoustic disturbances at M = 5.35 with a stiff excitation in the region of Re_c.     

Vortex dynamics of a trapezoidal bluff body placed inside a circular pipe

The influence of Reynolds number and blockage ratio on the vortex dynamics of a trapezoidal bluff body placed inside a circular pipe is studied experimentally and numerically. Low aspect ratio, high blockage ratio, curved end conditions (junction of pipe and bluff body), axisymmetric upstream flow with shear and turbulence are some of the intrinsic features of this class of bluff body flows which have been scarcely addressed in the literature. A large range (200:200,000) of Reynolds number (Re_D) is covered in this study, encompassing all the three pipe flow regimes (laminar, transition and turbulent). Four different flow regimes are defined based on the distinct features of Strouhal number (St)–Re_D relation: steady, laminar irregular, transition and turbulent. The wake in the steady regime is stationary with no oscillations in the shear layer. The laminar regime is termed as irregular owing to irregular vortex shedding. The vortex shedding in this regime is observed to be symmetric. The emergence of separation bubble downstream of the bluff body on either side is another interesting feature of this regime, which is further observed to be symmetric. Two pairs of mean streamwise vortices are noticed in the near-wake regime, which are termed as reverse dipole-type wake topology. Beyond the irregular laminar regime, the Strouhal number falls gradually and vortex shedding becomes more periodic. This regime is named transition and occurs close to the Reynolds number at which transition to turbulence takes place in a fully developed pipe. The turbulent regime is characterised by a nearly constant Strouhal number. Typical Karman-type vortex shedding is noticed in this regime. The convection velocity, wake width formation length and irrecoverable pressure loss are quantified to highlight the influence of blockage ratio. These results will be useful to develop basic understanding of vortex dynamics of confined bluff body flow for several practical applications.     

Visualisation and analysis of large-scale vortex structures in three-dimensional turbulent lid-driven cavity flow

In this paper, large eddy simulation (LES) of a three-dimensional turbulent lid-driven cavity (LDC) flow at Re = 10,000 has been performed using the multiple relaxation time lattice Boltzmann method. A Smagorinsky eddy viscosity model was used to represent the sub-grid scale stresses with appropriate wall damping. The prediction for the flow field was first validated by comparing the velocity profiles with previous experimental and LES studies, and then subsequently used to investigate the large-scale three-dimensional vortical structures in the LDC flow. The instantaneous three-dimensional coherent structures inside the cavity were visualised using the second invariant (Q), Δ criterion, λ₂ criterion, swirling strength (λ_ci) and streamwise vorticity. The vortex structures obtained using the different criteria in general agree well with each other. However, a cleaner visualisation of the large vortex structures was achieved with the λ_ci criterion and also when the visualisation is based on the vortex identification criteria expressed in terms of the swirling strength parameters. A major objective of the study was to perform a three-dimensional proper orthogonal decomposition (POD) on the fluctuating velocity fields. The higher energy POD modes efficiently extracted the large-scale vortical structures within the flow which were then visualised with the swirling strength criterion. Reconstruction of the instantaneous fluctuating velocity field using a finite number of POD modes indicated that the large-scale vortex structures did effectively approximate the large-scale motion. However, such a reduced order reconstruction of the flow based on the large-scale vortical structures was clearly not as effective in predicting the small-scale details of the fluctuating velocity field which relate to the turbulent transport.     

Numerical analyses of deflagration initiation by a hot jet

Numerical simulations of axisymmetric reactive jets with one-step Arrhenius kinetics are used to investigate the problem of deflagration initiation in a premixed fuel–air mixture by the sudden discharge of a hot jet of its adiabatic reaction products. For the moderately large values of the jet Reynolds number considered in the computations, chemical reaction is seen to occur initially in the thin mixing layer that separates the hot products from the cold reactants. This mixing layer is wrapped around by the starting vortex, thereby enhancing mixing at the jet head, which is followed by an annular mixing layer that trails behind, connecting the leading vortex with the orifice rim. A successful deflagration is seen to develop for values of the orifice radius larger than a critical value a _c in the order of the flame thickness of the planar deflagration δ_L. Introduction of appropriate scales provides the dimensionless formulation of the problem, with flame initiation characterised in terms of a critical Damköhler number Δ_c=(a _c/δ_L)², whose parametric dependence is investigated. The numerical computations reveal that, while the jet Reynolds number exerts a limited influence on the criticality conditions, the effect of the reactant diffusivity on ignition is much more pronounced, with the value of Δ_c increasing significantly with increasing Lewis numbers . The reactant diffusivity affects also the way ignition takes place, so that for reactants with the flame develops as a result of ignition in the annular mixing layer surrounding the developing jet stem, whereas for highly diffusive reactants with Lewis numbers sufficiently smaller than unity combustion is initiated in the mixed core formed around the starting vortex. The analysis provides increased understanding of deflagration initiation processes, including the effects of differential diffusion, and points to the need for further investigations incorporating detailed chemistry models for specific fuel–air mixtures.     

Flow-field dynamics of the non-reacting and reacting jet in a vitiated cross-flow

The dynamics of a premixed ethylene-air jet injected transverse to a vitiated cross-flow were investigated using high-repetition rate particle image velocimetry (PIV). Both non-reacting and reacting jets were found to be characterized by a dominant frequency associated with the jet wake vortex system. For the isothermal jet, increasing the momentum flux ratio (J) has only a slight effect on the frequency of the oscillation but significantly increases its magnitude. The reacting jet was found to exhibit different behavior, with a monotonic increase in the dominant frequency with J. The jet equivalence ratio (?_j) was found to have little effect on the rate of wake vortex shedding but affects the overall magnitude of the oscillation. Comparison with data reported in the literature suggests the relationship between the wake Strouhal number (St_w) and J is fuel dependent. Application of a vortex detection algorithm shows a stark difference in the location of the wake vortices under non-reacting and reacting conditions. Under isothermal conditions, the vortices are found close to the jet centerline and dissipate relatively quickly. Reaction confines the vortices to a narrow shear layer until a farther distance downstream and the vortices convect through the entire area of interest. Additionally, the vortex circulation strength was found to increase with J. Proper orthogonal decomposition (POD) analysis of the non-reacting and reacting jets demonstrates the dominance of the wake vortex structures in the oscillating flow fields. In both cases, the temporal information extracted from the most energetic modes is identical to the dominant frequencies measured in the flow fields. The primary effect of heat release is to reduce the overall amount of coherence and to delay the appearance of elevated coherence levels until a larger streamwise distance from the jet exit.     

Large-scale flow structures in a planar offset attaching jet with a co-flowing wall jet

Conditional averaging techniques were used to examine the periodic motions that were observed in flows consisting of an offset planar jet and a co-flowing planar wall jet. The offset jet is one jet height (H_j) away from the wall and has a Reynolds number of approximately 40, 000, based on H_j and flow-rate averaged velocity U_o; for the co-flowing jets, different heights (i.e., 0.18H_j and 0.5H_j) and velocities (i.e., 0.56U_o and 0.36U_o) were considered. The flows had periodic motions with frequencies fH_j/U_o = 0.28 and 0.49 or fH_c/U_o = 0.23 and 0.25, where H_c is the distance between the jets. The periodic motions were present in both the inner shear layer of the offset jet above the re-circulation region and the outer shear layer of the wall jet below the re-circulation region. The motions from the inner shear layer of the offset jet persisted in the shear layer that formed downstream of the re-circulating region. There were periodic motions in the outer shear layer of the offset jet particularly in the flow with the smaller wall jet. The relative contribution of the motions to the total fluctuations increased as the flow evolved downstream reaching a maximum approximately 4H_c downstream of the flow exit. The relative contribution of the periodic motions to the turbulent fluctuations was similar in the two flows but the periodic motions had a much larger impact on the near-wall velocity and pressure fluctuations in the flow with the smaller wall jet due to the trajectory of the periodic structures, the distance of the periodic structures to the wall and the size of these structures.     

Observation of vortex packets in direct numerical simulation of fully turbulent channel flow

A number of experimental studies have inferred the existence of packets of inclined, hairpinlike vortices in wall turbulence on the basis of observations made in two-dimensional x−y planes using visualization and particle image velocimetry (PIV). However, there are very few observations of hairpins in existing three-dimensional studies made using direct numerical simulation (DNS), and no such study claims to have revealed packets. We demonstrate, for the first time, the existence of hairpin vortex packets in DNS of turbulent flow. The vortex packet structure found in the present study at low Reynolds number,Re _t=300, is consistent with and substantiates the observations and the results from twodimensional PIV measurements at higher Reynolds numbers in channel, pipe and boundary layer flows. Thus, the evidence supports the view that vortex packets are a universal feature of wall turbulence, independent of effects due to boundary layer trips or critical conditions in the aforementioned numerical studies. Visualization of the DNS velocity field and vortices also shows the close association of hairpin packets with long low-momentum streaks and the regions of high Reynolds shear stress.     

Modification of the wake behind a circular cylinder by using synthetic jets

Experimental tests were conducted to control the flow around a cylinder by means of unsteady blowing (synthetic jet) through a single slot disposed on the wall of the model. The flow Reynolds number (based on the diameter of the model) wasR _D=10₅. The efficiency of the synthetic jet is quantified in terms of delaying separation and modifying the drag coefficient. The investigations were of three types: measurements of the mean pressure distribution, wall visualizations of the separation line position and measurements of the mean flow-field in the wake.     

Flow and mixing fields of turbulent bluff-body jets and flames

The mean structure of turbulent bluff-body jets and flames is presented. Measurements of the flow and mixing fields are compared with predictions made using standard turbulence models. It is found that two vortices exist in the recirculation zone; an outer vortex close to the air coflow and an inner vortex between the outer vortex and the jet. The inner vortex is found to shift downstream with increasing jet momentum flux relative to the coflow momentum flux and gradually loses its circulation pattern. The momentum flux ratio of the jet to the coflow in isothermal flows is found to be the only scaling parameter for the flow field structure. Three mixing layers are identified in the recirculation zone. Numerical simulations using the standard k-? and Reynolds stress turbulence models underpredict the length of the recirculation zone. A simple modification to the C₁ constant in the dissipation transport equation fixes this deficiency and gives better predictions of the flow and mixing fields. The mixed-is-burnt combustion model is found to be adequate for simulating the temperature and mixing field in the recirculation zone of the bluff-body flames.     

Visualization study on vortex structure over an airfoil using planar laser induced fluorescence

Abstract

The research discussed the application of planar laser-induced fluorescence technique for visualizing the flow over an airfoil at different Reynolds numbers and angles of attack. The proposed arrangement allows visualizing the development process of the flow field structure around the airfoil. The focus of the study is the influence of the angles of attack and the Reynolds number on the separation boundary layer, which causes the wake vortex or separation bubble. Compared with the traditional visualization technology, the technology of planar laser-induced fluorescence has better time resolution (50?ns) and followability (Reynolds number?=?219,500). In order to achieve high-speed flow field visualization, planar laser-induced fluorescence provides a reliable means of measurement to solve the related engineering problems.     

Direct numerical simulation of the flow around a wall-mounted square cylinder under various inflow conditions

The flow around a wall-mounted square cylinder of side d is investigated by means of direct numerical simulation (DNS). The effect of inflow conditions is assessed by considering two different cases with matching momentum-thickness Reynolds numbers Re_θ ? 1000 at the obstacle: the first case is a fullyturbulent zero pressure gradient boundary layer, and the second one is a laminar boundary layer with prescribed Blasius inflow profile further upstream. An auxiliary simulation carried out with the pseudo-spectral Fourier–Chebyshev code SIMSON is used to obtain the turbulent time-dependent inflow conditions which are then fed into the main simulation where the actual flow around the cylinder is computed. This main simulation is performed, for both laminar and turbulent-inflows, with the spectral-element method code Nek5000. In both cases the wake is completely turbulent, and we find the same Strouhal number St ? 0.1, although the two wakes exhibit structural differences for x > 3d downstream of the cylinder. Transition to turbulence is observed in the laminar-inflow case, induced by the recirculation bubble produced upstream of the obstacle, and in the turbulent-inflow simulation the streamwise fluctuations modulate the horseshoe vortex. The wake obtained in our laminar-inflow case is in closer agreement with reference particle image velocimetry measurements of the same geometry, revealing that the experimental boundary layer was not fully turbulent in that dataset, and highlighting the usefulness of DNS to assess the quality of experimental inflow conditions.     

Visualization of turbulent flow around a sphere at subcritical reynolds numbers

The shear layer evolution and turbulent structure of near-wake behind a sphere atRe= 11,000 and 5,300 were investigated using a smoke-wire visualization method. A laminar flow separation was found to occur near the equator. The smooth laminar shear layers appeared to be axisymmetrically stable to the downstream location of aboutx/d=1.0 atRe=11,000 andx/d= 1.7∼1.8 atRe=5,300, respectively. At Re=11,000, the vortex ring-shaped protrusions were observed with the onset of shear layer instability. Moreover, the transition from laminar to turbulence in the separated flow region occurred earlier at the hiher Reynolds number ofRe=11,000 than atRe=5,300. The PIV measurements in the streamwise and cross-sectional planes atRe=11,000 clearly revealed the turbulent structures of the sphere wake such as recirculating flow, shear layer instability, vortex roll-up, and small-scale turbulent eddies.     

Control of flow in forced jets: a comparison of round and square cross sections

Abstract  

Direct numerical simulation of incompressible, spatially developing round and square jets at a Reynolds number of 1,000 is performed. The effect of two types of inlet perturbation on the flow structures is analyzed. First, dual-mode excitation, which is a combination of axisymmetric perturbation at preferred mode frequency and helical perturbation at sub-harmonic frequency is used, having a disturbance frequency ratio equal to R _f  = 2. It is observed that the circular and square jets bifurcate and spread on one of the orthogonal planes forming a Y-shape jet in the downstream while no spreading is visible on the other plane. The second type of perturbation is a flapping excitation at a sub-harmonic frequency, St _F = 0.2. It leads to a Y-shape bifurcation for both square and circular jets. On the other hand, for flapping excitation at the preferred mode frequency, namely, St _F = 0.4, a circular jet bifurcates into a Ψ-shape whereas the square jet reveals simple spreading.     

Three-Dimensional Stability of Burgers Vortices

Burgers vortices are explicit stationary solutions of the Navier-Stokes equations which are often used to describe the vortex tubes observed in numerical simulations of three-dimensional turbulence. In this model, the velocity field is a two-dimensional perturbation of a linear straining flow with axial symmetry. The only free parameter is the Reynolds number Re = Γ/ν, where Γ is the total circulation of the vortex and ν is the kinematic viscosity. The purpose of this paper is to show that Burgers vortices are asymptotically stable with respect to small three-dimensional perturbations, for all values of the Reynolds number. This general result subsumes earlier studies by various authors, which were either restricted to small Reynolds numbers or to two-dimensional perturbations. Our proof relies on the fact that the linearized operator at Burgers vortex has a simple and very specific dependence upon the axial variable. This allows to reduce the full linearized equations to a vectorial two-dimensional problem, which can be treated using an extension of the techniques developed in earlier works. Although Burgers vortices are found to be stable for all Reynolds numbers, the proof indicates that perturbations may undergo an important transient amplification if Re is large, a phenomenon that was indeed observed in numerical simulations.     

Effect of boundary layer thickness before the flow separation on aerodynamic characteristics and heat transfer behind an abrupt expansion in a round tube

Results of numerical investigation of the boundary layer thickness on turbulent separation and heat transfer in a tube with an abrupt expansion are shown. The Menter turbulence model of shear stress transfer implemented in Fluent package was used for calculations. The range of Reynolds numbers was from 5·10³ to 105. The air was used as the working fluid. A degree of tube expansion was (D ₂/D ₁)² = 1.78. A significant effect of thickness of the separated boundary layer both on dynamic and thermal characteristics of the flow is shown. In particular, it was found that with an increase in the boundary layer thickness the recirculation zone increases, and the maximum heat transfer coefficient decreases. The work was financially supported by the Russian Foundation for Basic Research (project codes 07-08-00025 and 06-08-00300).     

Counter rotating vortex pair structure in a reacting jet in crossflow

This paper analyzes the time averaged flow structure of a reacting jet in cross flow (RJICF), emphasizing the structure of the counter-rotating vortex pair (CVP) by using simultaneous tomographic particle image velocimetry (TPIV) and hydroxyl radical planar laser induced fluorescence (OH-PLIF). It was performed to determine the extent to which heat release, and the associated effects of gas expansion and baroclinic vorticity production, impact the structure of the CVP. These results show the clear presence of a CVP in the time averaged flow field, whose trajectory lies below the jet centerline on either side of the centerplane. Consistent with other measurements of high momentum flux ratio JICF in nonreacting flows, there is significant asymmetry in strength of the two vortex cores. The strength and structure of the CVP was quantified with vorticity and swirling strength (λ_ci), showing that some regions of the flow with high shear are not necessarily accompanied by large scale bulk flow rotation and vice-versa. The OH PLIF measurement allows for correlation of the flame position with the dominant vortical structures, showing that the leeward flame branch lies slightly above, as well as, in the region between the CVP cores.     

DMD和POD对超燃冲压发动机凹腔流动的稳定性分析

开式凹腔作为超燃冲压发动机中增加掺混和稳焰的装置, 其流动稳定性的研究对深入理解凹腔增加掺混和稳焰机理以及凹腔的设计有着重要的学术意义和工程应用价值.基于大涡模拟方法对超燃冲压发动机开式凹腔流动进行数值模拟, 分别采用动力学模态分解(dynamic mode decomposition, DMD)和本征正交分解方法(proper orthogonal decomposition, POD)对自激振荡流动进行稳定性分析. DMD方法可准确提取凹腔的振荡频率, 与Rossiter模型以及压力脉动FFT分析得到的频率吻合较好, 且DMD中对应Rossiter前3阶频率的模态在流动中的主导作用顺序也与FFT分析结果一致, 自激振荡中RossiterⅢ模态占据主导作用, 同时DMD方法对Rossiter 3阶以上模态频率的预测能力明显强于FFT分析方法.在对低频的提取方面, DMD方法比Rossiter模型更具有优势.与前6阶Rossiter模态对应DMD模态均缓慢收敛, 主要表现为剪切层中的分离涡结构和中部及下游区域中的涡结构.前3阶不稳定模态中的分离涡结构主要集中在中部剪切层以及后缘附近区域. POD方法中较少的模态包含流场绝大部分的能量.但是, 通过POD方法提取的模态频率在分辨率上效果不佳, 提取到最低频率为Rossiter 3阶模态对应的频率, 且模态中均存在次频, 次频与主频之间的耦合导致模态的形态相差较大.另外, 与DMD方法相比POD方法无法判断所提取的模态的稳定性.      

激波/边界层干扰对等离子体合成射流的响应特性

利用高速纹影系统和数值模拟方法研究了激波/边界层干扰对逆流喷射的等离子体合成射流的响应特性,并揭示了流动控制机理.实验在来流马赫数Ma=3.1的风洞中进行,测试模型采用钝头体和压缩斜坡的组合模型,等离子体合成射流激励器安装在钝头体头部.纹影系统捕捉了放电频率为f=1 kHz和f=3 kHz的激励对附体激波形态和分离激波运动的控制效果.等离子体合成射流使压缩斜坡激波/边界层干扰区域的起始点向下游移动,分离泡尺寸减小,附体激波强度减弱,发生弯曲,再附点移向上游,与此同时分离激波向附体激波逼近.与f=3 kHz激励相比,f=1 kHz激励的射流流量更大,对激波/边界层干扰的影响范围更广、控制效果更好.通过数值模拟,揭示了射流与来流相互作用对下游流场的作用机理:射流与来流相互作用诱导出大尺度旋涡,大尺度旋涡耗散发展增强了近壁面流场的湍流度;压缩斜坡上游近壁面的流场性质发生变化,进而导致了压缩斜坡激波/边界层干扰区域流动的变化.     

Large eddy simulation of turbulent horizontal buoyant jets

Large eddy simulations (LESs) of turbulent horizontal buoyant jets are carried out using a high-order numerical method and Sigma subgrid-scale (SGS) eddy-viscosity model, for a number of different Reynolds (Re) and Richardson (Ri) numbers. Simulations at previous experimental flow conditions (Re = 3200, 24, 000 and Ri = 0, 0.01) are carried out first, and the results are found to be qualitatively and quantitatively similar to the experimental results, thus validating the numerical methodology. The effect of varying Ri (values 2×10^?4, 0.001, 0.005, and 0.01) and Re (3200 and 24, 000) is studied next. The presence of stable stratification on one side and unstable stratification on the other side of the jet centreline leads to an asymmetric development of horizontal buoyant jets. It is found that this asymmetry, the total radial spread and the vertical deflection are significantly affected by Ri, while Re affects only the radial asymmetry. The need for developing improved integral models, accounting for this asymmetry, is pointed out. Turbulent production and dissipation rates are investigated, and are found to be symmetric in the horizontal plane, but asymmetric in the mid-vertical plane. A previously proposed model, for correlation between the vertical component of the fluctuating scalar flux vector and the vertical cross-correlation component of the Reynolds tensor, is modified based on the current LES results. Instantaneous scalar and velocity fields are analysed to reveal the structure of horizontal buoyant jets. Similar to the developed turbulent jet, the flow close to the nozzle too is found to be markedly different in the stable and unstable stratification regions. Persistent coherent vortex rings are found in the stable stratification region, while intermittent breakdown of vortex rings into small-scale structures is observed in the unstable stratification region. Similarities and differences between the flow structures in the horizontal buoyant jet configuration and those in the jet in crossflow configuration are discussed. Finally, a dynamic mode decomposition analysis is carried out, which indicates that the flow in the unstable stratification region is more energetic and prone to instabilities, as compared to the flow in the stable stratification region.     

雷诺数对圆形渐缩喷嘴湍流射流的影响

本文研究雷诺数(Re)对圆形渐缩喷嘴湍流射流的影响.实验在射流出口雷诺数为 Re = 4050—20100 的范围内进行,分别测量了射流出口、中心线的平均及湍流流场以及部分径向剖面速度分布.所有测量均采用单热线恒温热线风速仪进行高频采样,所测流场范围在轴向上为 0—30d(这里d为射流出口直径).虽然出口速度分布均为"平顶帽"形,但测量结果依然反映出Re对射流出口以及下游流场有强烈的影响.当Re小于临界值(～10000)时 关键词： 雷诺数 圆形射流 热线风速仪