Signal separation using linear canonical and fractional Fourier transforms

Signal separation is an important operation in many areas such as communications, geophysics, and optics including optical signal processing. In this article, the issue of signal separation based on the linear canonical transform (LCT) and the fractional Fourier transform (FRFT) is considered. An iterative algorithm for signal separation in the 2-ray ground reflected model using the FRFT is also presented along with the simulation results.     

Optical Digital Fast Fourier Transform System

A system for optical digital fast Fourier transform (FFT) is proposed. Data exchange, adder, and multiplier circuits required for the optical FFT system are designed. Each circuit contains the same basic element of an optical beam switch composed of a polarization rotator and a birefringent plate. In the FFT algorithm, butterfly switching for data exchange is important and the method of optical switching networks is very suitable for such operations. FFT calculation for one-dimensional data of a sinusoidal signal is experimentally demonstrated using the optical system. The throughput of the proposed system is estimated and its future perspective is discussed.     

水下目标几何声散射回波在分数阶傅里叶变换域中的特性

水下目标散射回波在时域、频域混叠在一起, 而且受声波入射角度的影响严重, 在不同的入射角度下表现出很大的差异, 需要建立全方位入射角度下回波分量的理论分析模型. 本文推导了目标几何声散射分量在分数阶傅里叶变换域中随入射角度变化的解析表达式; 确定了目标几何声散射回波分量在最佳分数阶傅里叶变换域中的全方位模型, 从理论上证明了目标回波的几何特征形式; 给出了离散分数阶傅里叶变换对声散射分量的分辨能力和计算精度与发射信号带宽和观测时间之间的关系. 实验数据处理表明, 建立的分数阶傅里叶变换域的全方位模型与目标几何特征是一致的, 对未知入射角度下的目标识别提供了理论依据.     

基于分数阶傅立叶变换的线性调频回波参数估计

本文提出了一种适用于宽带线性调频回波的分数阶傅立叶变换参数估计方法。它通过寻找合适的信号代替发射信号做模版,使得模版信号与接收信号的模糊函数匹配度高,峰值尖锐,失真率低。再利用分数阶傅立叶变换与模糊函数的关系,使用两次分数阶域的峰值搜索代替原有的一次二维搜索降低计算量。仿真实验结果表明,本文提出的方法在精确估计宽带回波的时延和频移的同时降低了计算复杂度。     

基于多项式调频Fourier变换的信号分量提取方法

为了从含有噪声的混合信号中有效提取各个信号分量, 提出一种基于多项式调频Fourier变换的分量提取方法. 通过研究Fourier变换和分数阶Fourier变换的信号能量积累方式及变换基函数的时频表示, 提出利用时频平面上的多项式调频曲线族代替Fourier变换和分数阶Fourier 变换的调频直线族, 将变换的适用范围扩展到非线性调频信号. 采用粒子群智能优化算法搜索调频曲线族的最优多项式参数, 使混合信号中的某一分量在多项式调频Fourier域上能量谱集中. 最后对能量谱集中的分量进行窄带滤波, 并利用多项式调频逆Fourier变换重构信号分量. 仿真实验结果表明, 该方法不仅能够提取混合信号中的线性调频分量, 还能够实现非线性调频分量的能量谱集中、信号分离和时频特征提取.     

Spectrum measurement in the fractional Fourier domain

Fractional Fourier transform (FRFT) plays an important role in many fields of optics and signal processing. This paper considers the problem of real-time measurement of the spectrum of a signal in the FRFT domain. In this paper, we propose two approaches for real-time measurement of the FRFT of a signal based on modulation and bandpass filtering systems. The relation is established between the linear frequency modulation (LFM or chirp) spectrum and the FRFT of its envelope. In addition, two applications for spectrum measurement are presented in the FRFT domain. The LFM signal can be bandlimited in the Fourier transform (FT) domain through spectrum measurement associated with bandpass filtering method. The results can also be useful in the problems related to swept-frequency filter for measurement in the FRFT domain.     

基于S变换的改进窗口傅里叶三维测量法

讨论了一维S变换在处理条纹图中的应用,推导了S变换表达式,提出一种基于S变换脊的自适应窗口傅里叶三维测量法。利用S变换对于频率的敏感性以及S变换脊思想,求得任意点的瞬时频率。推导了在相位跳变剧烈区域相位二阶导φ″(b)对S变换脊的影响,并求得去除此影响后更为准确的瞬时频率。然后将瞬时频率倒数作为经典窗口傅里叶变换(WFT)的窗口大小,解出条纹图的精确相位。最后对去除相位二阶导影响前后基于S脊的WFT进行对比仿真;实验验证其与传统基于小波脊的WFT在抗噪声、解相位精度上的优势。     

弹光调制非等相位干涉信号的快速光谱反演算法

在弹光调制傅里叶变换光谱仪(PEM-FTS)中,由于调制光程差的非线性,不能直接采用快速傅里叶变换(FFT)进行反演光谱,且直接计算开销过大。首先在Matlab软件中用非均匀快速傅里叶变换算法(NUFFT)对PEM非等相位干涉信号进行了软件仿真,其次设计了以TMS320C6713高性能浮点数字信号处理器(DSP)芯片为核心的光谱信息处理系统,实现了硬件上的光谱实时处理。研究表明,算法对光谱反演具有速度快、精度高等优点,1024点光谱反演的速度较直接运算的速度提高20多倍,反演精度可达0.78%。     

Fourier at the heart of computer music: From harmonic sounds to texture

Beyond the scope of thermal conduction, Joseph Fourier's treatise on the Analytical Theory of Heat (1822) profoundly altered our understanding of acoustic waves. It posits that any function of unit period can be decomposed into a sum of sinusoids, whose respective contributions represent some essential property of the underlying periodic phenomenon. In acoustics, such a decomposition reveals the resonant modes of a freely vibrating string. The introduction of Fourier series thus opened new research avenues on the modeling of musical timbre—a topic that was to become of crucial importance in the 1960s with the advent of computer-generated sounds. This article proposes to revisit the scientific legacy of Joseph Fourier through the lens of computer music research. We first discuss how the Fourier series marked a paradigm shift in our understanding of acoustics, supplanting the theory of consonance of harmonics in the Pythagorean monochord. Then, we highlight the utility of Fourier's paradigm via three practical problems in analysis–synthesis: the imitation of musical instruments, frequency transposition, and the generation of audio textures. Interestingly, each of these problems involves a different perspective on time–frequency duality, and stimulates a multidisciplinary interplay between research and creation that is still ongoing.     

Integration of digital signal processing technologies with pulsed electron paramagnetic resonance imaging

The integration of modern data acquisition and digital signal processing (DSP) technologies with Fourier transform electron paramagnetic resonance (FT-EPR) imaging at radiofrequencies (RF) is described. The FT-EPR system operates at a Larmor frequency (L(f)) of 300MHz to facilitate in vivo studies. This relatively low frequency L(f), in conjunction with our approximately 10MHz signal bandwidth, enables the use of direct free induction decay time-locked subsampling (TLSS). This particular technique provides advantages by eliminating the traditional analog intermediate frequency downconversion stage along with the corresponding noise sources. TLSS also results in manageable sample rates that facilitate the design of DSP-based data acquisition and image processing platforms. More specifically, we utilize a high-speed field programmable gate array (FPGA) and a DSP processor to perform advanced real-time signal and image processing. The migration to a DSP-based configuration offers the benefits of improved EPR system performance, as well as increased adaptability to various EPR system configurations (i.e., software configurable systems instead of hardware reconfigurations). The required modifications to the FT-EPR system design are described, with focus on the addition of DSP technologies including the application-specific hardware, software, and firmware developed for the FPGA and DSP processor. The first results of using real-time DSP technologies in conjunction with direct detection bandpass sampling to implement EPR imaging at RF frequencies are presented.     

Two-dimensional Fourier transform of arbitrarily sampled NMR data sets

A new procedure for Fourier transform with respect to more than one time variable simultaneously is proposed for NMR data processing. In the case of two-dimensional transform the spectrum is calculated for pairs of frequencies, instead of conventional sequence of one-dimensional transforms. Therefore, it enables one to Fourier transform arbitrarily sampled time domain and thus allows for analysis of high dimensionality spectra acquired in a short time. The proposed method is not limited to radial sampling, it requires only to fulfill the Nyquist theorem considering two or more time domains at the same time. We show the application of new approach to the 3D HNCO spectrum acquired for protein sample with radial and spiral time domain sampling.     

傅里叶变换求取叠栅条纹微小位移的精度分析

提出了借助于傅里叶变换提取叠栅条纹相位分布的途径来获得条纹微小位移量的方法中，图像的截断必然会产生频谱泄漏，从而引入数据处理的误差。详细分析了傅里叶变换中频谱泄漏产生的原因及其对测量误差的影响，提出了图像处理时，通过外插值将截断区域延拓为叠栅条纹周期整数倍时可以减小甚至忽略频谱泄漏所引起的相位计算误差，并对此进行了数值模拟以及初步的实验验证，证实了该方法的有效性，为叠栅偏折法应用于微细尺度流动与传热的实验研究提供了有效的技术途径。     

光纤法布里-珀罗传感器串连复用的傅里叶变换解调方法初探

光纤法布里—珀罗传感器复用、特别是串连复用的解调十分困难。为解决这个问题,从光纤法布里—珀罗应变传感器的基本原理出发、在仅有两只传感器复用的基本条件下,深人分析了复用系统组合输出光强信号及其分布特性;研究了对其进行傅里叶变换的解调原理及具体实现方法,分析了因复用信号不满足傅里叶变换条件而在变换域产生的畸变,进行了计算机仿真解调。在此基础上,搭建了两只传感器的串连复用实验系统,并用此方法实现了两只复用传感器的解调,且传感器之间的相互影响小于5％。理论与实验表明,虽然传感器的复用信号不满足傅里叶变换的标准条件,且仿真与实验存在一定差异,但所提出的傅里叶变换方法,基本可用于光纤法布里—珀罗传感器的串连复用解调。     

线性调频信号激励过阻尼双稳系统的随机共振现象研究

线性调频信号是工程中常见的一种信号, 由于其为非周期信号, 无法以频域信噪比作为衡量其是否产生随机共振的测量手段, 故鲜有文献研究以线性调频信号为激励信号的随机共振现象. 本文利用线性调频信号在最优分数阶Fourier变换域上的能量聚集性, 首次提出以最优分数阶Fourier变换域上定义的信噪比作为测量手段, 研究了线性调频信号叠加高斯白噪声激励过阻尼双稳系统的随机共振现象, 且发现了以线性调频信号为激励信号时产生的新现象, 即随着信号频率的增大, 随机共振将逐渐减弱, 并给出了合理的解释.仿真的结果与理论分析一致, 验证了本文所提出方法的有效性. 关键词： 线性调频信号 分数阶Fourier变换 随机共振     

傅里叶变换光谱分析系统及其测试

构建了一套改进的光的时间相干性以及傅里叶光谱分析实验系统,该系统利用光机电以及计算机软件编程技术,实时采集以He-Ne激光器、钠光灯和白炽灯为代表的各种光源在迈克耳孙干涉仪上产生的干涉条纹信号,将得到的光信号经光电倍增管转换为电信号进入电路系统,经滤波、A/D转换后,再输送到计算机进行傅里叶变换以及频谱分析.实验结果证实了该系统的有效性和实用性.     

基于旋转不变技术信号参数估计的激光扫频干涉测量方法

激光扫频干涉测量技术具有无测距盲区、非接触、单次测量多目标的能力.通过傅里叶变换可提取目标拍频频率,进而解算距离.然而受激光器调频带宽限制,通过傅里叶变换得到的目标分辨率受限于固有分辨率.为解决该问题,本文提出采用基于旋转不变技术的信号参数估计(ESPRIT)算法对测量信号进行频谱分析.实验通过插值拟合法校正测量信号拍频非线性,进而采用ESPRIT算法测量目标距离,结果表明在傅里叶变换算法无法区分临近目标频率的情况下,采用ESPRIT算法可以区分出目标的频率,通过计算可得被测目标的厚度为2.08 mm.从而为诸如光纤临近损伤点、薄台阶高度或小孔等测量提供了思路.     

水下回波处理中分数阶傅里叶变换的带通采样实现方法

利用球形压电陶瓷自身所具有的耐压能力,采用径向极化空气背衬压电球壳换能器作为声学接收敏感元件,设计并制作了一种球形耐压水听器。首先对其低频开路接收灵敏度和谐振频率等声学特性进行了分析和有限元仿真,然后对其强度和稳定性等耐压性能进行了分析和有限元仿真,最后对其声学性能和耐压能力进行了测试。测试表明,该球形耐压水听器的直径为36 mm,工作频段为50 Hz10 kHz,低频接收灵敏度为􀀀198:4 dB(0 dB=1 V/Pa),等效自噪声谱级为46.5 dB@1 kHz,其耐压深度可达3000 m。该耐压水听器为大深度水听器设计提供了参考,在深水声学领域具有重要的应用价值。     

Multiparty Quantum Secret Sharing Using Quantum Fourier Transform

A （n, n）-threshold scheme of multiparty quantum secret sharing of classical or quantum message is proposed based on the discrete quantum Fourier transform. In our proposed scheme, the secret message, which is encoded by using the forward quantum Fourier transform and decoded by using the reverse, is split and shared in such a way that it can be reconstructed among them only if all the participants work in concert. Fhrthermore, we also discuss how this protocol must be carefully designed for correcting errors and checking eavesdropping or a dishonest participant. Security analysis shows that our scheme is secure. Also, this scheme has an advantage that it is completely compatible with quantum computation and easier to realize in the distributed quantum secure computation.     

基于相位相关性的傅里叶变换光谱数据的相位误差修正方法

 相位误差的校正是傅里叶变换成像光谱仪数据处理的重要环节之一。针对干涉曲线的对称性特征,利用相位相关性计算方法,提出一种新的傅里叶变换光谱数据的相位校正的方法。将相位相关性拟合为Sinc函数,计算亚像素的偏移量,采用离散余弦变换转换到光谱域。使用标准光谱库中的源光谱数据作为原始数据,将通过离散余弦变换仿真的干涉数据与该方法得到的结果进行比较和验证,并与Mertz方法进行了对比。结果表明：该方法精度优于Mertz方法,并且计算简单。     

傅里叶变换红外光谱分析技术在预防医学领域的应用

本文从环境污染、生命科学、应用开发及最新红外分析方法四方面阐述了傅里叶变换红外光谱分析技术在预防医学领域的具体应用：在环境污染领域主要叙述了气红联用（GC/FTIR）技术在环境复杂有机污染体系分析中的优势、局限性及解决途径；在生命科学领域主要叙述了红外光谱分析技术在蛋白质二级结构、膜蛋白、脂、核酸及细胞、组织等复杂体系研究中的具体应用；另外，还介绍了的红外光谱分析技术在食品、化妆品及保健药品等领域的具体应用及几种最新红外分析方法。