Thermodynamic consideration of the mixed micelle of surfactants

In conformity with the conclusion obtained previously, the mixed micelle formation of surfactants was treated thermodynamically as the appearance of a macroscopic bulk phase with the aid of the excess thermodynamic quantities similar to those used for the adsorbed film. The composition of surfactant in the mixed micelle and the thermodynamic quantities of micelle formation were found to be evaluated by applying the thermodynamic equations derived. These equations were extended so as to be applicable to any kind of surfactant mixture. It was shown that the critical micelle concentration vs. composition of surfactant curves form a diagram analogous to the phase diagram of binary mixture. Applying the equation to the published data on typical surfactant systems, this thermodynamic approach was proved to be useful to clarify the miscibility of surfactants in the micellar state.     

Studies on the Effect of Organic Solvents and Temperature on the Micellar Solution of Pentamethylene-1,5-bis(tetradecyldimethylammonium bromide) Gemini Surfactant

Effects of three organic solvents, viz. methyl cellosolve, acetonitrile, and formamide, on the micellization process of Gemini surfactant pentamethylene-1,5-bis(tetradecyldimethylammonium bromide) aqueous solutions, with the volume percentages of the organic solvents up to 50%, have been investigated conductometrically. The studies were made at different temperatures and the data were used to find out different micellization parameters. From the study, it was observed that, although an increment in the amount of the organic solvents delays the micellization, the increase in the critical micelle concentration (cmc) is comparatively less below 20%(v/v) showing the predominance of water character in the bulk phase at lower compositions of the organic solvents. Applying equilibrium model for micelle formation, various thermodynamic parameters were also calculated from the temperature dependence of the cmc values and the results show that the micellization process becomes less spontaneous as the volume % of the organic solvent increases in the system due to the action of water-organic solvent mixed media as better solvent than pure water (solvophobic effect) for the studied Gemini molecules.     

Micellization of monomeric and dimeric (gemini) surfactants in polar nonaqueous-water-mixed solvents

Dimeric or gemini surfactants are novel surfactants that are finding a great deal of discussion in the academic and industrial arena. They consist of two hydrophobic chains and two polar head groups covalently linked by a spacer. Data on critical micelle concentration (cmc) and degree of counterion dissociation (α) are reported on bis-cationic C₁₆H₃₃N⁺(CH₃)₂–(CH₂)_s–N⁺(CH₃)₂C₁₆H₃₃, 2Br⁻, referred to as 16-s-16, for spacer lengths s=4, 5, 6 in aqueous and in polar nonaqueous (1-propanol, 2-methoxyethanol or methyl cellosolve, dimethyl sulfoxide, acetonitrile)-water-mixed solvents. The behavior is compared with conventional monomeric surfactant cetyltrimethylammonium bromide (CTAB). Thermodynamic parameters are obtained from the temperature dependence of the cmc values. It is observed that micellization tendency of the surfactants decreases in the presence of polar nonaqueous solvents. However, detailed studies with dimethylsulfoxide (DMSO) show that the geminis nearly outclass the micellization-arresting property of this solvent. Also, within geminis, higher spacer length is found suitable for showing micellization even with high DMSO content (50% v/v). The implications of these results of gemini micellization may be useful in micellar catalysis in polar nonaqueous solvents.     

Self aggregation of binary mixtures of sodium dodecyl sulfate and polyoxyethylene alkyl ethers in aqueous solution

The mixed micelles of sodium dodecyl sulphate (SDS) with Brij35 and Brij 97 were studied separately by fluorescence measurement using pyrene as fluorescent probe. In the range of 0–1.0 mole fraction (X) of added SDS to Brij solutions, the cmc value of the mixed micelles varies from 0.085 to 8 mmol with Brij 35 and 0.04 to 8 mmol with Brij 97. The aggregation number also changes. A measure of the stability of mixed micelles is also presented. The interaction parameter ₁₂ and the chain–chain contribution parameter (B₁) are extracted from the analysis of the results. This parameter B₁ is related to the standard free energy change associated with the introduction of one ionic species into a nonionic micelle coupled with the release of one nonionic species from the micelle. The clouding behaviour of Brij 97 in the presence of SDS was investigated and the associated thermodynamic parameters of clouding were generated and discussed.     

Thermodynamic study on the adsorption and micelle formation of long chain alkyltrimethylammonium chlorides

The surface tension of aqueous solutions of tetradecyl-trimethylammonium chloride (TTAC) and decyltrimethylammonium chloride (DeTAC) were measured as a function of temperature at concentrations below and above the critical micelle concentration under atmospheric pressure. The entropy and energy of adsorption from the monomeric state and from the micellar state and also the entropy and energy of micelle formation for TTAC were evaluated and compared with those of dodecyltrimethyl-ammonium chloride (DTAC). The values of Δ^M _W s and Δ^M _W u for TTAC and DTAC systems show that the micelle formation is driven by the entropy at low temperatures and by the energy at high temperatures. Received: 9 December 1997 Accepted: 4 March 1998     

Determination of the critical premicelle concentration, first critical micelle concentration and second critical micelle concentration of surfactants by resonance Rayleigh scattering method without any probe

The purpose of this work is to determine the values of critical premicelle concentration (CPMC), first critical micelle concentration (FCMC) and second critical micelle concentration (SCMC) of surfactants using a common spectrofluorophotometer by recording resonance Rayleigh scattering (RRS) signal without any probe. The plot of the RRS intensities at the maximum scattering wavelength (I(RRS)(max)) versus surfactant concentrations (c) was constructed to obtain the I(RRS)(max)-c curve. From the inflexions in I(RRS)(max)-c curve, the CPMC, FCMC and SCMC values of a surfactant can be obtained sensitively. The FCMC of some anionic, cationic and nonionic surfactants such as sodium dodecyl sulfate (SDS), sodium dodecyl benzene sulfonate (SDBS), cetyltrimethylammonium bromide (CTAB), cetylpyridinium chloride (CPC), Tween-20, and Tween-80 were determined by RRS method and the values are in good agreement with those obtained from conductivity and surface tension measurements and literature values. The CPMC and SCMC of SDS and CTAB were also determined by RRS method respectively and the values conform to literature values too. Furthermore, RRS method can also be used to determine the FCMC of an amphiphilic macromolecule-hemoglobin, whose structure resembles a surfactant. From the experimental results, it is concluded that RRS method can be applied to the simultaneous determination of the CPMC, FCMC and SCMC values in a sensitive, accurate and no probe way.     

混合胶束中Gemini阳离子表面活性剂14-s-14与常规表面活性剂的协同作用:连接臂及反离子效应(英文)

The mixed micelle formation of binary cationic 14-s-14 gemini with conventional single chain surfactants was studied by conductivity measurements.The critical micelle concentration(cmc) and the degree of counterion binding values(g) of the binary systems were determined.The results were analyzed by applying regular solution theory(RST) to calculate micellar compositions(X),activity coefficients(f1,f2),and the interaction parameters(β).The synergistic interactions of all the investigated cationic gemini+conventional surfactant combinations were found to be dependent upon the length of hydrophobic spacer of the gemini surfactant.The excess Gibbs free energy of mixing was evaluated,and it indicated relatively more stable mixed micelles for the binary combinations.     

流动注射-化学发光法测定十六烷基三甲基溴化铵的临界胶束浓度

采用流动注射技术，研究了CTAB-Luminol-H2O2体系的化学发光行为。CTAB对Luminol-H2O2体系的化学发光强度有明显的增强作用，并且在临界胶束浓度出现最大值，从而建立了流动注射-化学发光法直接测定CTAB的CMC的一种新方法，并给出了可能的作用机理。     

Effect of core-shell micelle formation on the redox properties of phenothiazine-labeled poly(ethyl glycidy ether)-block-poly(ethylene oxide)

Redox properties of phenothiazine-labeled poly(ethyl glycidy ether)-block-poly(ethylene oxide) (PT-EGE_n-b-EO_m) are reversibly changed by core-shell micelle formation. In the temperature range higher than the critical micellization temperature (cmt), the anodic potential of PT group positively shifts and concomitantly its anodic current decrease, or levels off compared to those of the reference polymer PT-EO_m without the thermo-responsive EGE_n segment. The former alteration is caused by incorporation of hydrophobic PT groups into a core of the micelle and the latter by the decrease in the diffusion coefficient of PT groups due to formation of the core-shell micelles. The cmt value and the temperature-dependent alteration in the redox properties strongly depend on the polymer structure, especially the length of thermo-responsive EGE_n segment. The electrochemically determined hydrodynamic radii of the polymer aggregates seem to be overestimated, compared to the values reported for the aggregates of other thermo-responsive polymers with similar molecular weights, implying the presence of electrochemically inactive PT groups in the copolymers having longer thermo-responsive segments.     

Effect of cetyltrimethylammonium bromide and its gemini homologue bis(cetyldimethylammonium)butane dibromide on activity of xanthine oxidase

Spectrophotometry is employed to study the effect cetyltrimethylammonium bromide (CTAB) and bis(cetyldimethylammonium)butane dibromide (C₁₆C₄C₁₆Br₂) on the activity of xanthine oxidase (XO), a key enzyme in purine metabolism, at pH 7.4 and 25°C. The spectrophotometric results revealed that the Gemini surfactant interact strongly with the XO than its conventional single chain counterpart and unfold it to a greater extent as compared to CTAB. The effectiveness of the Gemini in interacting/unfolding the XO are justified owing to peculiar structural features of C₁₆C₄C₁₆Br₂ owing to the presence of two charged headgroups and two hydrophobic tails and hence enhanced competence for electrostatic and hydrophobic interactions.     

Effects of alkyl chain length on synergetic adsorption and micelle formation in homologous cationic surfactant mixtures

The surface tensions (gamma) of the aqueous solutions of tetradecyltrimethylammonium bromide (TTAB) and dodecyltrimethylammonium bromide (DTAB) were measured as a function of the total molality of surfactants (m) and the relative proportion (composition) of DTAB (X(2)) at 298.15 +/- 0.05 K under atmospheric pressure. The effect of the difference in the hydrophobic chain length between hexadecyltrimethylammonium bromide (HTAB) and DTAB on the synergism was examined. This synergism was observed in the miscibility at the surface of a mixture of these two compounds. The excess Gibbs energy of adsorption of the TTAB-DTAB system was positive in contrast to the HTAB-DTAB system. This indicates that there are certain restrictions on the difference in the hydrophobic chain length for the synergism to be brought about in homologous cationic surfactant mixtures. This mechanism was explained by the theory of a staggered structure formation at the air/water interface. A similar argument successfully applied to the hexadecyltrimethylammonium chloride (HTAC)-dodecyltrimethylammonium chloride (DTAC) and tetradecyltrimethylammonium chloride (TTAC)-DTAC mixtures also.     

Deaggregation of long chain alkyl β-naphthoic acid ester with β-CD and α-CD： A mimic way to remove excessive fat from fatty liver

The deaggregating ability of β-CD and α-CD against the aggregated n-hexadecyl β-naphthoate （A16） and n-dodecyl β-naphthoate （A12） depended not only on the aggregating tendency of A16 and A12 but also on the initial concentration of the aggregated A16 or A12. The inclusive ability of β-CD with the substrates is greater than that of α-CD under hydrophobiclipophilic interaction.     

Effect of core-shell micelle formation on the redox properties of phenothiazine-labeled poly(ethyl glycidy ether)-block-poly(ethylene oxide)

Redox properties of phenothiazine-labeled poly(ethyl glycidy ether)-block-poly(ethylene oxide) (PT-EGE_n-b-EO_m) are reversibly changed by core-shell micelle formation. In the temperature range higher than the critical micellization temperature (cmt), the anodic potential of PT group positively shifts and concomitantly its anodic current decrease, or levels off compared to those of the reference polymer PT-EO_m without the thermo-responsive EGE_n segment. The former alteration is caused by incorporation of hydrophobic PT groups into a core of the micelle and the latter by the decrease in the diffusion coefficient of PT groups due to formation of the core-shell micelles. The cmt value and the temperature-dependent alteration in the redox properties strongly depend on the polymer structure, especially the length of thermo-responsive EGE_n segment. The electrochemically determined hydrodynamic radii of the polymer aggregates seem to be overestimated, compared to the values reported for the aggregates of other thermo-responsive polymers with similar molecular weights, implying the presence of electrochemically inactive PT groups in the copolymers having longer thermo-responsive segments.     

乙二亚甲基-双（十六烷基二甲基溴化铵）稀水溶液的特性

合成并表征了阳离子Gemini表面活性剂乙二亚甲基-α,β-双（十六烷基二甲基溴化铵）（16-2-16）.用表面张力和粘度法确定了其cmc，通过表面张力曲线计算了16-2-16的表面吸附量、吸附分子面积和胶束形成自由能；并用悬滴法测定了16-2-16在空气表面和十二烷界面的动态表（界）面张力.用改进的Washburn方法测定16-2-16水溶液在硅胶粉末表面的接触角，并进一步讨论了16-2-16在硅胶表面的吸附引起的润湿性变化. 探讨润湿性变化与动态张力的关系. 将16-2-16 与溴代十六烷基三甲胺(CTAB)做比较:两种物质在含油硅胶粉末上引起的最高脱油率（实验室模拟驱油）均发生在cmc附近,但16-2-16的最高脱油率是68％， CTAB的是63％.而所用CTAB的cmc比16-2-16的约大50倍,也就是说用16-2-16可以获得更高的脱油率.     

Effect of grafting architecture on the surfactant-like behavior of clay-poly(NiPAAm) nanohybrids

A new class of clay-polymer nanohybrids was synthesized by grafting poly(N-isopropylacrylamide) (PNiPAAm) on the edge of nanoscale silicate platelets (NSPs) through covalently bonded linkers to form various architectures. The inherent ionic character of NSPs and the organic moieties of isopropyl amide in PNiPAAms impart surface active properties to the nanohybrids. Surface tension and particle size measurements were used to determine the critical micelle concentrations (CMCs) of the nanohybrids. It was found that PNiPAAm brushes grafted onto NSPs with the single-headed linkers are loosely packed and can expand easily in water causing inter-hybrid interactions. In contrast, PNiPAAm brushes grafted onto NSPs with the double-headed linkers may alternatively exhibit intra-hybrid interactions and the hybrids tend to exist in a dispersed state. Consequently, the latter has a higher CMC than the former. In addition, the CMC can be tailored by adjusting the grafting density of the linkers on the NSP surfaces. The densely grafted nanohybrids exhibit close inter-hybrid contact resulting in a lower CMC than that for the sparsely grafted nanohybrids. Molecular simulations were also performed to study the effects of the polymer-grafted architecture and the density of the linkers on the micellar behavior of NSP-PNiPAAm hybrids. The simulation results were found to be in good agreement with the experimental observations. Thus, it is possible to control the surface active properties and aggregation of the clay-PNiPAAm hybrids by manipulating the organic grafting architectures of the silicate platelets.     

Small-angle neutron-scattering study and micellar model of the gemini (phenylenedimethylene)bis(n-octylammonium)dibromide surfactant micelles in water

The microstructure of the micelles formed in aqueous solution by gemini surfactants with aromatic spacers, [Br(CH₃)₂N⁺(C _m H_{2 m +1})-(Ph)-(C _m H_{2 m +1})N⁺(CH₃)₂Br, m=8 and Ph = o-, m- or p-phenylenedimethylene] has been examined by small-angle neutron scattering. Aggregation of the gemini surfactants with an o-phenylenedimethylene spacer brings about formation of premicelles and small micelles at concentrations below the second critical micelle concentration, while above this concentration marked micellar growth and variation in shape occurs. It is suggested that the minimum aggregate formed at this critical micelle concentration may be the trimer or tetramer and that this result supports the mechanism of “gemini → submicelle → assembly” for micellar growth. Received: 8 September 1998 Accepted in revised form: 27 November 1998     

Micellization and mixed micellization of cationic gemini (dimeric) surfactants and cationic conventional (monomeric) surfactants: Conductometric,dye solubilization,and surface tension studies

In the present study, we have investigated the self-association, mixed micellization, and thermodynamic studies of a cationic gemini (dimeric) surfactant, hexanediyl-1,6-bis(dimethylcetylammonium bromide (16-6-16)) and a cationic conventional (monomeric) surfactant, cetyltrimethylammonium bromide (CTAB). The critical micelle concentration (CMC) of pure (16-6-16 and CTAB) and mixed (16-6-16+CTAB) surfactants was measured by electrical conductivity, dye solubilization, and surface tension measurements. The surface properties (viz., C₂₀ (the surfactant concentration required to reduce the surface tension by 20 mN/m), Π_CMC (the surface pressure at the CMC), Γ_max (maximum surface excess concentration at the air/water interface), A_min (the minimum area per surfactant molecule at the air/water interface), etc.) of micellar (16-6-16 or CTAB) and mixed micellar (16-6-16+CTAB) surfactant systems were evaluated. The thermodynamic parameters of the micellar (16-6-16 and CTAB) and mixed micellar (16-6-16+CTAB) surfactant systems were also evaluated.     

Effect of the surfactant alkyl chain length on the stabilisation of lyotropic nematic phases

Lyotropic quaternary mixtures of potassium alkanoates (KCx) and sodium alkyl sulphates (NaCxS), where x is the number of carbon atoms in their alkyl chains, were prepared to investigate the effect of the surfactant alkyl chain length on the stabilisation of lyotropic nematic phases. The lyotropic mixtures investigated were formed by the dissolution of KCx (NaCxS) surfactants in the mixture of Rb₂SO₄/1-decanol/water (Na₂SO₄/1-decanol/water), separately. The uniaxial-to-biaxial nematic phase transitions were identified from the temperature dependence of the birefringences of the nematic phases by means of laser conoscopy. The micelle dimensions were obtained from small-angle X-ray scattering measurements. It was observed that the increase in the surfactant alkyl chain length causes the micellar growth in the plane perpendicular to the main amphiphile bilayer. The surfactant alkyl chain length plays a key role on the shape anisotropy of micelles, which triggers the orientational fluctuations that are responsible for the stabilisation of the different lyotropic nematic phases.     

Synthesis and surface properties of a series of surfactants based on O-alkyl and O-perfluoro-N,N′-diisopropylisoureas

O-Dodecyl-N,N′-diisopropylisourea and O-tridecafluorooctyl-N,N′-diisopropylisourea were synthesized by reaction of hydrogenated or fluorinated alcohols onto diisopropylcarbodiimide in quasi-quantitative yields. Adding various hydrogen halides (HCl, HBr, or HI) onto these isoureas enabled one to obtain isoureas hydrohalides with tensioactive properties. The surface properties of both series of hydrogenated and fluorinated surfactants were studied and compared. The influence of the counter-ions onto the surface properties showed that the tensioactive properties were improved in the following increasing order: I < Cl < Br. Fluorinated isourea hydrohalides exhibited better surfactant properties than their hydrogenated homologues.