Advanced electrochemical performances of Li4Ti5O12/Ag prepared by a facile synthesis route

Spinel Li₄Ti₅O₁₂ coated by highly dispersed nanosized Ag particles was synthesized via a facile and effective ultrasonic-assisted method in this paper. X-ray diffraction (XRD) results indicated that Ag was not doped into the lattice of spinel Li₄Ti₅O₁₂. The as-synthesized Li₄Ti₅O₁₂/Ag exhibited enhanced electronic conductivity and excellent electrochemical performances. Its electronic conductivity was increased about four times compared to that of the pristine Li₄Ti₅O₁₂. Even at 10 C rate, the as-synthesized Li₄Ti₅O₁₂/Ag could keep 86.5 % of the reversible capacity at 1 C rate and its reversible capacity was higher than 140 mAhg^?1 whereas those were 75.3 % and 118 mAhg^?1 for the pristine Li₄Ti₅O₁₂.     

Structural and electrochemical study on Li(Li1/3Ti5/3)O4 anode material for lithium ion batteries

Chemical and electrochemical studies have shown that various titanium oxides can incorporate lithium in different ratios. Other compounds with a spinel-type structure and corresponding to the spinel oxides LiTi₂O₄ and Li₄Ti₅O₁₂ have been evaluated in rechargeable lithium cells with promising features. The spinel Li[Li_1/3Ti_5/3]O₄ [1–5] compound is a very appealing electrode material for lithium ion batteries. The lithium insertion-deinsertion process occurs with a minimal variation of the cubic unit cell and this assures high stability which may reflect into long cyclability. In addition, the diffusion coefficient of lithium is of the order of 10⁻⁸ cm²s⁻¹ [5] and this suggests fast kinetics which may reflect in high power capabilities. In this work we report a study on the kinetics and the structural properties of the Li[Li_1/3Ti_5/3]O₄ intercalation electrode carried out by: cyclic voltammetry, galvanostatic cycling and in-situ X-ray diffraction. The electrochemical characterization shows that the Li[Li_1/3Ti_5/3]O₄ electrode cycles around 1.56 V vs. Li with a capacity of the order of 130 mAhg⁻¹ which approaches the maximum value of 175 mAhg⁻¹ corresponding to the insertion of 1 equivalent per formula unit. The delivered capacity remains constant for hundred cycles confirming the stability of the host structure upon the repeated Li insertion-deinsertion process. This high structural stability has been confirmed by in situ Energy Dispersion X-ray analysis. Paper presented at the 7th Euroconference on Ionics, Calcatoggio, Corsica, France, Oct. 1–7, 2000.     

Titanium-modified Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> with a synergistic effect of surface modifying,bulk doping,and size reducing

In this work, a one-step solid-phase sintering process via TiO₂ and Li₂CO₃ under an argon atmosphere, with ultra-fine titanium powder as the modifying agent, was used to prepare a nano-sized Li₄Ti₅O₁₂/Ti composite (denoted as LTO–Ti) at 800 °C. The introduction of ultra-fine metal titanium powder played an important role. First, X-ray photoelectron spectroscopy demonstrates that Ti⁴⁺ was partially changed into Ti³⁺, through the reduction of the ultra-fine metal titanium powder. Second, X-ray diffraction revealed that the ultra-fine metal titanium powder did not react with the bulk structure of Li₄Ti₅O₁₂, while some pure titanium peaks could be seen. Additionally, the size of LTO–Ti particles could be significantly reduced from micro-scale to nano-scale. The structure and morphology of LTO–Ti were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy. Electrochemical tests showed a charge/discharge current of 0.5, 1, 5, and 10 C; the discharge capacity of the LTO–Ti electrode was 170, 161, 140, and 111 mAh g^?1. It is believed that the designed LTO–Ti composite makes full use of both components, thus offering a large contact area between the electrolyte and electrode, high electrical conductivity, and lithium-ion diffusion coefficient during electrochemical processes. Furthermore, ultra-fine titanium powder, as the modifying agent, is amenable to large-scale production.     

Recent development and application of Li4Ti5O12 as anode material of lithium ion battery

Lithium-ion batteries with both high power and high energy density are one of the promising power sources for electric devices, especially for electric vehicles (EV) and other portable electric devices. One of the challenges is to improve the safety and electrochemical performance of lithium ion batteries anode materials. Li₄Ti₅O₁₂ has been accepted as a novel anode material of power lithium ion battery instead of carbon because it can release lithium ions repeatedly for recharging and quickly for high current. However, Li₄Ti₅O₁₂ has an insulating character due to the electronic structure characterized by empty Ti 3d-states, and this might result in the insufficient applications of LTO at high current discharge rate before any materials modifications. This review focuses first on the present status of Li₄Ti₅O₁₂ including the synthesized method, doping, surface modification, application and theoretical calculation, then on its near future development.     

Electrospinning preparation of one-dimensional Co<Superscript>2+</Superscript>-doped Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> nanofibers for high-performance lithium ion battery

One-dimensional Co²⁺-doped Li₄Ti₅O₁₂ nanofibers with a diameter of approximately 500 nm have been synthesized via a one-step controllable electrospinning method. The Co²⁺-doped Li₄Ti₅O₁₂ nanofibers were systematically characterized by XRD, ICP, TEM, SEM, BET, EDS mapping, and XPS. Based on the cubic spinel structure and one-dimensional effect of Li₄Ti₅O₁₂, Co²⁺-doped Li₄Ti₅O₁₂ nanofibers exhibit the enlarged lattice volume, reduced particle size and enhanced electrical conductivity. More importantly, Co²⁺-doped Li₄Ti₅O₁₂ nanofibers as a lithium ion battery anode electrode performs superior electrochemical performance than undoped Li₄Ti₅O₁₂ electrode in terms of electrochemical measurements. Particularly, the reversible capacity of Co²⁺-doped Li₄Ti₅O₁₂ electrode reaches up to 140.1 mAh g^?1 and still maintains 136.5 mAh g^?1 after 200 cycles at a current rate of 5 C. Therefore, one-dimensional Co²⁺-doped Li₄Ti₅O₁₂ nanofiber electrodes, showing high reversible capacity and remarkable recycling property, could be a potential candidate as an anode material.     

Nano Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> as sulfur host for high-performance Li-S battery

S/Li₄Ti₅O₁₂ cathode with high lithium ionic conductivity was prepared for Li-S battery. Herein, nano Li₄Ti₅O₁₂ is used as sulfur host and fast Li⁺ conductor, which can adsorb effectively polysulfides and improve remarkably Li⁺ diffusion coefficient in sulfur cathode. At 0.5 C, S/Li₄Ti₅O₁₂ cathode has a stable discharge capacity of 616 mAh g^?1 at the 700th cycle and a capacity loss per cycle of 0.0196% from the second to the 700th cycle, but the corresponding values of S/C cathode are 437 mAh g^?1 and 0.0598%. Even at 2 C, the capacity loss per cycle of S/Li₄Ti₅O₁₂ cathode is only 0.0273% from the second to the 700th cycle. The results indicate that Li₄Ti₅O₁₂ as the sulfur host plays a key role on the high performance of Li-S battery due to reducing the shuttle effect and enhancing lithium ionic conductivity.     

Electrostatic spray deposition of spinel Li4Ti5O12 thin films for rechargeable lithium batteries

Spinel Li₄Ti₅O₁₂ thin films are important for the fabrication of rechargeable lithium microbatteries. Porous thin films of Li₄Ti₅O₁₂ were prepared by electrostatic spray deposition (ESD) technique with lithium acetate and titanium butoxide as the precursors. The structures of these films were analyzed by scanning electron microscopy and X-ray diffraction. Coin-type cells with a liquid electrolyte were made with the Li₄Ti₅O₁₂ films against metallic lithium. Their electrochemical performance was investigated by means of galvanostatic cell cycling, cyclic voltammetry and Ac impedance spectroscopy. It was found that pure spinel phase of Li₄Ti₅O₁₂ was obtained. After annealing at the optimal temperature of 700 °C, the films can deliver a reversible specific capacity of about 150 mAh/g with excellent capacity retention after 70 cycles. Their electrochemical characteristics were quite comparable with those of the Li₄Ti₅O₁₂ laminate electrodes containing carbon black additive.     

Research progress on the low-temperature electrochemical performance of Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> anode material

Li₄Ti₅O₁₂ is regarded as the ideal anode material for its stable structure, high charge/discharge platform, and safety performance. But low ionic and electronic conductivity of the Li₄Ti₅O₁₂ anode material under the condition of low temperature greatly limit its application in practical production. In this paper, some modified methods for improving the low-temperature electrochemical performance of Li₄Ti₅O₁₂ anode material were summarized. Meanwhile, we explored its influence mechanisms at low temperature, one is, with the subtle changes of lattice parameters and oxygen atom fraction coordinates of Li₄Ti₅O₁₂ at low temperature, the changes of the bond length influence the structural stability of Li₄Ti₅O₁₂ and the diffusion path of lithium ions; the other reason is that the charge transfer resistance increases obviously and the lithium ion diffusion coefficient reduces under low temperature. Finally, the research directions for improving the low-temperature electrochemical performance were proposed.     

High-rate Li4Ti5O12/C composites as anode for lithium-ion batteries

The Li₄Ti₅O₁₂/C composites were synthesized by a simple solid-state reaction at 800 °C for 12 h by using Super P® conductive carbon black as carbon source. X-ray diffraction analysis shows that the Li₄Ti₅O₁₂ with 0, 5, 7.5, and 10 wt% carbon shows similar patterns with cubic spinel structure. Scanning electron microscope shows that Li₄Ti₅O₁₂ aggregated seriously, but the aggregation was inhibited by the addition of Super P® carbon. The results indicate that the addition of 5 wt% carbon during sintering and a further 5 wt% carbon during slurry preparation shows the best rate capability of 110 mAh/g when the cells were charge/discharged at 10 C rate. The comparison of the charge–discharge curves shows that the higher rate improvement should further decrease the particle size of LTO or improve the conductivity of LTO itself.     

Solid-state synthesis of graphite carbon-coated Li4Ti5O12 anode for lithium ion batteries

Graphites are widely used for their high electrical conductivity and good thermal and chemical stability. In this work, graphitic carbon-coated lithium titanium (Li₄Ti₅O₁₂/GC) was successfully synthesized by a simple one-step solid-state reaction process with the assistance of sucrose without elevating sintering temperature. The lattice fringe of 0.208 nm clearly seen from the high-resolution transmission electron microscopy (HRTEM) images was assigned to graphite (010). The average grain size of the as-prepared Li₄Ti₅O₁₂/GC was about 100–200 nm, 1 order smaller than that of pure Li₄Ti₅O₁₂ prepared similarly. The rate performance and cycle ability were significantly improved by the hybrid conducting network formed by graphitic carbon on the grains and amorphous carbon between them. The specific capacity retention rate was 66.7 % when discharged at a rate of 12C compared with the capacity obtained at 0.5C. After 300 cycles, the capacity retention was more than 90 % at a high rate of 15C.     

Exceptional electrochemical performance of two-year aged V2O5 nanowires for lithium storage

Vanadium pentoxide nanowires (VONs) with a uniform thickness of 15 nm were synthesized to use as an electrode for reversible lithium storage. The VONs after two years of aging time exhibit a high reversible lithium storage capacity and an excellent rate capability at a current density of 37 mAg⁻¹ and 74–740 mAg⁻¹, respectively, in the test voltage range of 0.1–3.0 V versus Li/Li⁺. Moreover, the VONs show a constant reversible specific capacity ∼945 mAhg⁻¹ after 50 cycles at 74 mAg⁻¹. The good electrochemical performances of VONs are attributed to the robust interlayer structure and improved electrical conductivity. These aging effects in VONs can be exploited to fabricate one-dimensional electrode materials for high-performance Li-ion batteries.     

Preparation and characteristics of Li4Ti5O12 with various dopants as anode electrode for hybrid supercapacitor

Spinel-Li₄Ti₅O₁₂ is successfully synthesized by a solid phase synthesis. The Li₄Ti₅O₁₂ powders with various dopants (Al³⁺, Cr³⁺, Mg²⁺) synthesized at 800 °C are in accordance with the Li₄Ti₅O₁₂ cubic spinel phase structure. The dopants are inserted into the lattice structure of Li₄Ti₅O₁₂ without causing any changes in structural characteristics. In order to study the effect on various dopants, the hybrid supercapacitor is prepared by using un-doped Li₄Ti₅O₁₂ and doped Li₄Ti₅O₁₂ in this work. The electrochemical performance of the hybrid supercapacitor is characterized by impedance spectroscopy and cycle performance. The results show Cr³⁺ and Mg²⁺ dopants enhance the conductivity of Li₄Ti₅O₁₂. Also, Al³⁺ substitution improves the reversible capacity and cycling stability of Li₄Ti₅O₁₂. It is found that effect of dopant on the electrochemical performance of Li₄Ti₅O₁₂ as electrode material for hybrid supercapacitor where the EDLC and the Li ion secondary battery coexist in one cell system.     

Enhanced rate performance of lithium titanium oxide anode material by bromine doping

Br-doped lithium titanium oxide (Li₄Ti₅O₁₂) particles in the form of Li₄Ti₅Br _x O_12-x (x?=?0, 0.1, 0.2, 0.3, 0.4) are synthesized via a simple liquid deposition reaction, followed by a high-temperature treatment. The effects of bromine (Br) doping on the structures and electrochemical properties of Li₄Ti₅O₁₂ are extensively studied. It is found that Br atoms can enter the lattice structure and enlarge the lattice parameters of Li₄Ti₅O₁₂. Although Br doping has not changed the phase composition, obvious effects on the particle’s morphology and size have been observed. Electrochemical test results indicate that the rate capability of Li₄Ti₅O₁₂ has been evidently improved by Br doping at an appropriate concentration. The as-synthesized Li₄Ti₅O_11.8Br_0.2 electrode presents much higher discharge capacity and better cycle stability than that of the other electrodes. The greatly enhanced electrochemical performance of Li₄Ti₅O_11.8Br_0.2 may be attributed to the improved dispersion of nanoparticles and increased electrical conductivity.     

Performance of solid-state hybrid supercapacitor with LiFePO4/AC composite cathode and Li4Ti5O12 as anode

We report the studies on quasi-solid battery-supercapacitor (BatCap) systems fabricated using sol–gel-prepared LiFePO₄ and its composites (LACs) with activated charcoal (AC) as hybrid cathode and Li₄Ti₅O₁₂ powder as anode separator by flexible gel polymer electrolyte (GPE) film. The GPE film comprises 1.0 M lithium trifluoromethane sulfonate (LiTf) solution in ethylene carbonate (EC)–propylene carbonate (PC) mixture, immobilized poly(vinylidene fluoride-co-hexafluoro-propylene) (PVdF-HFP), which is of high ionic conductivity (∼3.8 × 10⁻³ S cm⁻¹ at 25 °C) and electrochemical stability window (∼3 V). The effect of the addition of AC in composite electrode LACs has been analyzed using various techniques such as X-ray diffraction, porosity analysis, and electrochemical methods. The interfaces of composite LACs and GPE film not only offer high rate performance but also show high specific energy (>27.8 Wh kg⁻¹) as compared to the symmetric supercapacitors and pristine lithium iron phosphate (LiFePO₄)-based lithium ion batteries. The full BatCap systems have been characterized by cyclic voltammetry and galvanostatic charge–discharge tests. The BatCap systems with composite electrodes (LACs) offer better cyclic performance as compared to that of pristine LiFePO₄-based BatCap or LIB LiFePO₄/Li₄Ti₅O₁₂.

     

Synthesis and electrochemical properties of Li4Ti5O12/C composite by the PVB rheological phase method

Spinel Li₄Ti₅O₁₂/C powders were synthesized successfully by a simple rheological phase method using polyvinylbutyral (PVB) as both template and carbon source. The structure and morphology characteristics of the composite were investigated by X-ray diffraction (XRD), field emission scanning electron microscopy and transmission electron microscopy. The XRD results showed that the composite had a good crystallinity. Its average particle size was about 2.1 μm with a narrow size distribution as a result of homogeneous mixing of the precursors. The in situ carbon coating produced by decomposition of PVB played an important role in improving electrical conductivity, thereby enhancing the rate capacity of Li₄Ti₅O₁₂ as anode material in Li-ion batteries. The Li₄Ti₅O₁₂/C composite, synthesized at 800 °C for 15 h under argon, containing 0.98 wt% of carbon, exhibited better electrochemical properties in comparison with the pristine Li₄Ti₅O₁₂, which could be attributed to the enhanced electrical conductive network of the carbon coating on the particle surface.     

Electrical and electrochemical properties of molten salt-synthesized Li4Ti5−xSnxO12 (x=0.0, 0.05 and 0.1) as anodes for Li-ion batteries

Submicron-sized polyhedral Li₄Ti_5−xSn_xO₁₂ (x=0.0, 0.05, and 0.1) materials were successfully prepared by a single-step molten salt method. The structural, morphological, transport and electrochemical properties of the Li₄Ti_5−xSn_xO₁₂ were studied. X-ray diffraction patterns showed the formation of a cubic structure with a lattice constant of 8.31 Å, and the addition of dopants follows Vegard's law. Furthermore, FT-IR spectra revealed symmetric stretching vibrations of octahedral groups of MO₆ lattice in Li₄Ti₅O₁₂. The formation of polyhedral submicron Li₄Ti_5−xSn_xO₁₂ particles was inferred from FE-SEM images, and a particle size reduction was observed for Sn-doped Li₄Ti₅O₁₂. The chemical composition of Ti, O and Sn was verified by EDAX. The DC electrical conductivity was found to increase with increasing temperature, and a maximum conductivity of 8.96×10⁻⁶ S cm⁻¹ was observed at 200 °C for Li₄Ti₅O₁₂. The galvanostatic charge–discharge behavior indicates that the Sn-doped Li₄Ti₅O₁₂ could be used as an anode for Li-ion batteries due to its enhanced electrochemical properties.     

Influence of post-calcination treatment on the spinel lithium titanium oxide anode material for lithium ion batteries

The influence of post-calcination treatment on spinel Li₄Ti₅O₁₂ anode material is extensively studied combining with a ball-milling-assisted rheological phase reaction method. The post-calcinated Li₄Ti₅O₁₂ shows a well distribution with expanded gaps between particles, which are beneficial for lithium ion mobility. Electrochemical results exhibit that the post-calcinated Li₄Ti₅O₁₂ delivers an improved specific capacity and rate capability. A high discharge capacity of 172.9 mAh g^?1 and a reversible charge capacity of 171.1 mAh g^?1 can be achieved at 1 C rate, which are very close to its theoretical capacity (175 mAh g^?1). Even at the rate of 20 C, the post-calcinated Li₄Ti₅O₁₂ still delivers a quite high charge capacity of 124.5 mAh g^?1 after 50 cycles, which is much improved over that (43.9 mAh g^?1) of the pure Li₄Ti₅O₁₂ without post-calcination treatment. This excellent electrochemical performance should be ascribed to the post-calcination process, which can greatly improve the lithium ion diffusion coefficient and further enhance the electrochemical kinetics significantly.     

Characterization of sprayed and sputtered thin films for lithium ion microbatteries

We have investigated the preparation of thin films of anode and cathode materials for all oxide solid state lithium ion microbatteries. Thin films of LiCoO₂ and Li_4/3Ti_5/3O₄ have been deposited by both spray pyrolysis and RF magnetron sputtering. The structural and electrochemical properties of high temperature-LiCoO₂ thin films have been determined. Spray pyrolysis prepared higher quality LiCoO₂ thin films. Both sprayed and sputtered Li_4/3Ti_5/3O₄ thin films exhibited interesting lithium intercalation capacity. However, it has been demonstrated that RF magnetron sputtering is more efficient than spray pyrolysis for optimizing the interface between Li_4/3Ti_5/3O₄ and the substrate material. Paper presented at the 3rd Euroconference on Solid State Ionics, Teulada, Sardinia, Italy, Sept. 15–22, 1996     

Synthesis of Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript>-reduced graphene oxide composite and its application for hybrid supercapacitors

We describe in this paper the synthesis and the characterization of Li₄Ti₅O₁₂-reduced graphene oxide (LTO-RGO) composite and demonstrate their use as hybrid supercapacitor, which is consist of an LTO negative electrode and activate carbon (AC) positive electrode. The LTO-RGO composites were synthesized using a simple, one-step process, in which lithium sources and titanium sources were dissolved in a graphene oxide (GO) suspension and then thermal treated in N₂. The lithium-ion battery with LTO-RGO composite anode electrode revealed higher discharge capacity (167 mAh g^?1 at 0.2 C) and better capacity retention (67%) than the one with pure LTO. Meanwhile, compared with the AC//LTO supercapacitor, the AC//LTO-RGO hybrid supercapacitor exhibits higher energy density and power density. Results show that the LTO-RGO composite is a very promising anode material for hybrid supercapacitor.     

Preparation of carbon encapsulated Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> anode material for lithium ion battery through pre-coating method

Carbon encapsulated Li₄Ti₅O₁₂ (C/Li₄Ti₅O₁₂) anode material for lithium ion battery was prepared by using the pre-coat method of two steps, and the TiO₂ was pre coated before the reaction with Li₂CO₃. The structure and morphology of the resultant C/Li₄Ti₅O₁₂ materials were characterized by X-ray diffraction (XRD) and scanning microscopy (SEM). Electrochemical tests showed that at 0.1 C, the initial discharge capacity was 169.9 mAh g^?1, and the discharge capacity was 80 mAh g^?1 at 5 C. After 100 cycles at 2 C, the discharge specific capacity was 108.5 mAh g^?1. Compare with one step coating method, results showed the C/Li₄Ti₅O₁₂ prepared by pre-coat method can reduce the particle’s size and effectively improve the electrochemical performance.