用氯离子电极同时测定阳离子表面活性剂的CMC及反离子缔合度

临界胶束浓度(CMC)是研究表面活性剂的一个重要参数,胶束的反离子缔合度(K)是重要的特性参数。本文以阳离子表面活性剂十烷基三甲基氯化铵(DTMAC)、十二烷基三甲基氯化铵(DTAC)、十四烷基三甲基氯化铵(TTAC)、十六烷基三甲基氯化铵(CTAC)和十八烷基三甲基氯化铵(OTAC)水溶液体系为研究对象,用氯离子选择电极分别测定了其水溶液体系胶束的CMC和K。     

Preparation and surface activity study of amino acid surfactants

Quaternary ammonium cationic surfactants are widely applied in many different fields, such as textile, cosmetic, and petrochemical industries. However, little research has been done on the effects of anion on cationic surfactants. In this study, two new surfactants, cetyltrimethylammonium glycine (CTAG) and octadecyltrimethylammonium glycine (OTAG), were prepared in a simple way using cetyltrimethylammonium chloride (CTAC), octadecyltrimethylammonium chloride (OTAC), and glycine. Then the surface activities were evaluated and compared with the two raw materials. The surface activity of CTAG and OTAG, including surface tension, foaming ability, and emulsification, is better than that of CTAC and OTAC in each case. With the glycine, the corrosion inhibition efficiencies of CTAG and OTAG are 91.12% and 97.89%, respectively, which are more effective than that of CTAC and OTAC. The superior performance of the two surfactants will be very helpful for developing an effective solution in the future.     

Properties of the Nanoscale Hydrophilic Cationic Pigment Based on Quaternary Surfactant

Dispersions of four nanoscale hydrophilic cationic pigments were prepared by micro jet milling process, in which the dodecyl trimethyl ammonium chloride (DTAC), tetradecyl trimethyl ammonium chloride (TDAC), hexadecyl trimethyl ammonium chloride (CTAC), and octadecyl trimethyl ammonium chloride (STAC) were used as the dispersers respectively. Zeta potential, particle size, viscosity and dispersion stability were tested. The effect of the hydrophobic chain of cationic quaternary surfactant on pigment dispersion's properties was discussed. The results showed that good dispersion effects were obtained when the hydrophobic chain were 14 or 16.     

Adsorption and adsolubilization of surfactants on titanium dioxides with functional groups

Adsorption of ionic surfactants on titanium dioxide with dodecyl chain groups or quaternary ammonium groups (XNm, where m is the carbon number of the alkyl chain, 4–16) was investigated. The adsorbed amount of cationic surfactants (dodecyltrimethylammonium bromide, DTAB; 1,2-bis(dodecyldimethylammonio)ethane dibromide, 2RenQ) on titanium dioxide with dodecyl chain groups increased with increasing concentration of the dodecyl chain due to hydrophobic interaction, where the adsorbed amounts of DTAB at saturation was considerably greater than those of 2RenQ. Adsorption of an anionic surfactant (sodium dodecyl sulfate, SDS) on XNm occurred mainly due to both electrostatic attraction force and hydrophobic interaction, depending on the alkyl chain length on XNm. On the other hand, adsorption of cationic surfactants, DTAC and 2RenQCl (their counter ions are chloride ions), on XNm was quite smaller compared with that of SDS due to electrostatic repulsion force. Adsolubilization of 2-naphthol in the surfactant-adsorbed layer on the titanium dioxides with the functional groups was also studied. The adsolubilized amounts of 2-naphthol on titanium dioxide with dodecyl chain groups were enhanced by adsorption of DTAB, but no distinct increase in the adsolubilization was observed by adsorption of 2RenQ. In the case of XNm, the amount of 2-naphthol adsorbed in the absence of surfactants increased with increasing alkyl chain length on XNm. Further, an appreciable increase in the adsolubilization of 2-naphthol on XNm with adsorption of 2RenQCl was observed. It was found from the admicellar partitioning coefficients that the adsolubilization of 2-naphthol preferably occurs on XNm by adsorption of SDS or 2RenQCl compared with that by DTAC. These differences in the adsolubilization were discussed by microproperties of the surfactant-adsorbed layers estimated using a spin probe.     

Thermodynamic study on the adsorption and micelle formation of long chain alkyltrimethylammonium chlorides

The surface tension of aqueous solutions of tetradecyl-trimethylammonium chloride (TTAC) and decyltrimethylammonium chloride (DeTAC) were measured as a function of temperature at concentrations below and above the critical micelle concentration under atmospheric pressure. The entropy and energy of adsorption from the monomeric state and from the micellar state and also the entropy and energy of micelle formation for TTAC were evaluated and compared with those of dodecyltrimethyl-ammonium chloride (DTAC). The values of Δ^M _W s and Δ^M _W u for TTAC and DTAC systems show that the micelle formation is driven by the entropy at low temperatures and by the energy at high temperatures. Received: 9 December 1997 Accepted: 4 March 1998     

Adsorption and micelle formation of alkylammonium chloride-alkyltrimethylammonium chloride mixtures

The surface tension of the aqueous solutions of binary cationic surfactant mixtures of (1) dodecylammnonium chloride (DAC)-tetradecyltrimethylammonium chloride (TTAC), (2) decylammonium chloride (DeAC)-dodecyltrimethylammonium chloride (DTAC), and (3) DAC-DTAC was measured as a function of the total molality and composition of surfactants at 298.15 K. The compositions of surfactants in the adsorbed film and micelle were evaluated and the phase diagram of adsorption and that of micelle formation were constructed. Furthermore the excess Gibbs energies of adsorption and micelle formation were calculated to estimate the deviation from the corresponding ideal mixing. It was found that the surface and micelle are enriched in trimethylammonium salts in (1) and (2), while in ammonium salt in (3) compared to the bulk solution. On the other hand, the micelle is enriched in trimethylammonium salts compared to the surface at the critical micelle concentration (CMC) in all the systems. The miscibility of the surfactants was clarified from the standpoints of the structure of the head group and of the matching between the size of polar head group of surfactants and the difference in hydrocarbon chain length.     

Modulation of photo-oxidative DNA damage by cationic surfactant complexation

The natural packaging of DNA in the cell by histones provides a particular environment affecting its sensitivity to oxidative damage. In this work, we used the complexation of DNA by cationic surfactants to modulate the conformation, the dynamics, and the environment of the double helix. Photo-oxidative damage initiated by benzophenone as the photosensitizer on a plasmid DNA complexed by dodecyltrimethylammonium chloride (DTAC), tetradecyltrimethylammonium chloride (TTAC), cetyltrimethyammonium chloride (CTAC) and bromide (CTAB) was detected by agarose gel electrophoresis. By fluorescent titration in the presence of ethidium bromide (EB) and agarose gel electrophoresis, we experimentally confirmed the complexation diagrams with a critical aggregation concentration on DNA matrix (CAC DNA) delimiting two regions of complexation, according to the DNA-phosphate concentration. The study of the photo-oxidative damage shows, for the first time, a direct correlation between the DNA complexation by these surfactants and the efficiency of DNA cleavage, with a maximum corresponding to the CAC DNA for DTAC and CTAC, and to DNA neutralization for CTAC and CTAB. The localization of a photosensitizer having low water solubility, such as benzophenone, inside the hydrophobic domains formed by the surfactant aggregated on DNA, locally increases the photoinduced cleavage by the free radical oxygen species generated. The inefficiency of a water-soluble quencher of hydroxyl radicals, such as mannitol, confirmed this phenomenon. The detection of photo-oxidative damage constitutes a new tool for investigating DNA complexation by cationic surfactants. Moreover, highlighting the drastically increased sensitivity of a complexed DNA to photo-oxidative damage is of crucial importance for the biological use of surfactants as nonviral gene delivery systems.     

The antibacterial finish of cotton via sols containing quaternary ammonium salts

The sols containing quaternary ammonium salts were prepared via sol-gel process. The effects of the molar rate of HCl, H₂O and EtOH to TEOS on the sol viscosity were investigated in detail. Cetyltrimethylammonium bromide (CTAB), Octadecyl dimethyl benzyl ammonium chloride (DC) and Ethylene-Bis (Octadecyl trimethyl ammonium chloride) [E-Bis(OTAC)]were added in the sols and applied to cotton samples by treated. The antibacterial activities of the samples were assessed against both Escherichia coli and Staphylococcus aureus bacteria. The samples treated by E-Bis(OTAC) sol exhibited the satisfactory antibacterial activity that resulted from the more microorganism adsorption and hydrophobicity. The antibacterial activities were still excellent after 10 times washings comparison with the control samples.     

Nanoaggregates of ABC-type triple hydrophilic block copolymers by binding of cationic surfactant

A triple hydrophilic block copolymer comprised of poly(ethylene oxide), poly(sodium 2-acrylamido-2-methylpropanesulfonate), and poly(methacrylic acid) (PEO–PAMPS–PMAA) does not form a micelle by itself when it is dissolved in water. However, in the previous paper, we fabricated the nanoaggregates of PEO–PAMPS–PMAA and cationic surfactant, such as cetyltrimethylammonium chloride (CTAC), by insolubilizing the anionic PAMPS and/or PMAA blocks of the polymer with CTAC only at high pH. In this paper, we fabricated the nanoaggregates of dodecyltrimethylammonium chloride (DTAC) and PEO–PAMPS–PMAA in a wide range of pH to examine the effect of ionization of the PMAA blocks of the polymer on the aggregates formation of PEO–PAMPS–PMAA. The properties of the nanoaggregates are affected by the ionization of PMAA block of the polymer. DTAC (C12 alkyl chain) was employed instead of CTAC (C16 alkyl chain) to reveal the effect of alkyl chain length of surfactant on the aggregate formation of PEO–PAMPS–PMAA. The properties of PEO–PAMPS–PMAA nanoaggregates also depend on the structure of surfactant. The binding of DTAC to PEO–PAMPS–PMAA was monitored by electrophoresis measurements, while the formation of DTAC/PEO–PAMPS–PMAA nanoaggregates was confirmed by scanning electron microscopy, dynamic light scattering measurements and fluorescence spectroscopy.     

Comparison of oleyl and elaidyl isomer surfactant-counterion systems in drag reduction, rheological properties and nanostructure

Compared with quaternary ammonium cationic surfactants with saturated alkyl chains, quaternary ammonium cationic surfactants with one double-bond in their alkyl chains, when mixed with appropriate counterions (in certain molar concentration ratios, ξ), can reach much lower effective drag-reduction temperatures, while maintaining the upper drag-reduction temperature limit of the corresponding saturated drag reducing surfactant solutions. No previous study has compared the effects of cis- vs. trans-unsaturated alkyl hydrocarbon tail configurations (oleyl vs. elaidyl) trimethyl ammonium chloride cationic surfactants at different counterion/surfactant concentration ratios on micellar nanostructures, (1)H NMR spectra and on rheological and drag-reduction behavior of their solutions. Since neither pure oleyl (cis-) nor elaidyl (trans-) trimethyl ammonium chloride surfactants are commercially available, they were synthesized and their 5mM solutions with NaSal counterion at concentrations of 5mM, 7.5mM and 12.5mM were studied.     

Thermodynamics of self-assembling of hydrophobically modified cationic polysaccharides and their mixtures with oppositely charged surfactants in aqueous solution

Microcalorimetric techniques, combined with turbidity measurements, were used to study the thermodynamics of self-assembling of hydrophobically modified cationic polysaccharides and their mixtures with oppositely charged surfactants in aqueous solution. The studied polyelectrolytes were a series of polymers based on dextran having pendant N-(2-hydroxypropyl)-N,N-dimethyl-N-alkylammonium chloride groups randomly distributed along the polymer backbone. The parameters for their micellization process are evaluated from the results of the observed dilution enthalpy curves and compared with those of the related cationic surfactants (DTAC and CTAC). The microcalorimetric results for the mixed systems (polyelectrolytes with oppositely charged surfactants) are used along with turbidity measurements to characterize systematically the thermodynamics of their interaction. The phase behavior is described and the interaction enthalpies are derived from the differences between the observed enthalpy curves with and without polyelectrolyte. Therefore, we discuss in detail the effect of changing the alkyl chain length of polyelectrolyte pendant groups, the molecular weight of the dextran backbone, and the temperature of the measurements on the interactions between polyelectrolyte and surfactant.     

Effects of alkyl chain length on synergetic adsorption and micelle formation in homologous cationic surfactant mixtures

The surface tensions (gamma) of the aqueous solutions of tetradecyltrimethylammonium bromide (TTAB) and dodecyltrimethylammonium bromide (DTAB) were measured as a function of the total molality of surfactants (m) and the relative proportion (composition) of DTAB (X(2)) at 298.15 +/- 0.05 K under atmospheric pressure. The effect of the difference in the hydrophobic chain length between hexadecyltrimethylammonium bromide (HTAB) and DTAB on the synergism was examined. This synergism was observed in the miscibility at the surface of a mixture of these two compounds. The excess Gibbs energy of adsorption of the TTAB-DTAB system was positive in contrast to the HTAB-DTAB system. This indicates that there are certain restrictions on the difference in the hydrophobic chain length for the synergism to be brought about in homologous cationic surfactant mixtures. This mechanism was explained by the theory of a staggered structure formation at the air/water interface. A similar argument successfully applied to the hexadecyltrimethylammonium chloride (HTAC)-dodecyltrimethylammonium chloride (DTAC) and tetradecyltrimethylammonium chloride (TTAC)-DTAC mixtures also.     

Cationic Surfactants as Regulators in Paper Separation of 2‐Nitrophenol and 2,4,6‐Trinitrophenol in Water

The chemical pollutants 2‐nitrophenol (2‐NP) and 2,4,6‐trinitrophenol (2,4,6‐TNP) were studied for their separation from water by the paper capillary permeation adsorption technique by the use of the four cationic surfactants dodecyltrimethylammonium chloride (DTAC), tetradecyltrimethylammonium bromide (TTAB), cetyltrimethylammonium bromide (CTAB), cetylpyridinium chloride (CPC) as regulators. The effect of pH and the concentration of surfactant on the separatability have been investigated. A nearly 100% separatability was obtained for each pollutant at its optimum pH and surfactant concentration. It was shown that the separation was accomplished via surface adsorption onto the fibers of paper. The change in separatability at basic pH 11 with surfactant variety was analyzed. The result shows that the surfactant with a longer chain alkyl group is more effective for the separation of 2‐NP and the surfactants with 16 carbons in the long chain alkyl group are most effective. The surfactants with 12 carbons or more in the long alkyl group but containing no aromatic group such as pyridyl group are equally effective for accomplishing an efficient separation of 2,4,6‐TNP. Selective separation of 2‐NP from an admixture of 2‐NP plus 2,4,6‐TNP was attempted. The optimum surfactant for each pollutant was tested with seawater for removing the pollutant. The goal of this study is to search for an optimum cationic surfactant and optimum separation conditions for nitrophenols.     

Synthesis and Performance of Double-Chain Quaternary Ammonium Salt Glucosamide Surfactants

A series of double-chain quaternary ammonium salt surfactants N-[N′[3-(gluconamide)] propyl-N′-alkyl]propyl-N,N-dimethyl-N-alkyl ammonium bromide (C_nDDGPB, where n represents a hydrocarbon chain length of 8, 10, 12, 14 and 16) were successfully synthesized from D (+)-glucose δ-lactone, N,N-dimethyldipropylenetriamine, and bromoalkane using a two-step method consisting of a proamine-ester reaction and postquaternization. Their surface activity, adsorption, and aggregation behavior in aqueous solution were investigated via measurements of dynamic/static surface tension, contact angle, dynamic light scattering, and transmission electron microscopy. An analysis of their application performance in terms of wettability, emulsifying properties, toxicity, and antibacterial properties was conducted. The results show that with increasing the carbon chain length of the C_nDDGPB surfactants, their critical micelle concentration (CMC) increased and the pC₂₀ and efficiency in the interface adsorption of the target product gradually decreased. Moreover, the influence of the hydrophobic carbon chain length on the surface of polytetrafluoroethylene (PTFE) was even greater for the wetting effect, reducing the contact angle to 32° within the length range of C8–C14. The results of the contact angle change and the wettability experiments proved that C₁₀DDGPB exhibited the best wettability. The liquid paraffin and soybean oil emulsification ability of C_nDDGPB showed an upward trend followed by a downward trend with the growth of the carbon chain, with C₁₂DDGPB exhibiting the best emulsification performance. The D_long/D_short ratio was far lower than 1, which indicates mixed-kinetic adsorption. The surfactants formed spherical micelles and showed a unique aggregation behavior in aqueous solution, which showed an increase–decrease–increase trend with the change in concentration. A cell toxicity and acute oral toxicity experiment showed that the C_nDDGPB surfactants were less toxic than the commonly used surfactant dodecyldimethylbenzyl ammonium chloride (1227). In addition, at a concentration of 150 ppm, C_nDDGPB exhibited the same bacteriostatic effect as 1227 at a concentration of 100 ppm. The results demonstrate that sugar-based amide cationic surfactants are promising as environmentally friendly disinfection products.     

Effect of the alkyl chain length on micelle formation for bis(N-alkyl-N,N-dimethylethylammonium)ether dibromides

Dimeric alkylammonium salts – gemini surfactants – due to their unusual very low critical micelle concentration and minimal inhibitory concentration are subject to intensive research as surface active and antimicrobial compounds. Thanks to the presence of two positively charged nitrogen atoms and a large molecular surface, gemini surfactants are also very efficient corrosion inhibitors. To strengthen the electrostatic adsorption of ammonium cations on a metal surface, which is a key parameter in the inhibition of corrosion, heteroatoms (O, S, N, or P) and π-electron systems can be introduced into the gemini surfactant structure to increase chemical adsorption. In this study, we investigated the relationship between the alkyl chain length and critical micelle concentration for gemini surfactants containing an oxygen atom in the spacer, that is, bis(N-alkyl-N,N-dimethylethylammonium)ether dibromides, for potential use as corrosion inhibitors.     

Effect of 60Co gamma-irradiation on dilute aqueous solutions of surfactants

Present work deals with the effects of gamma irradiation from 60Co gamma-ray source upon aqueous solutions of three kinds of surfactants. When dilute aqueous solutions of sodium dodecyl sulfate (SDS, anionic), cethyl trimethyl ammonium chloride (CTAC, cationic), and polyoxyethylene lauryl ether (POE, non-ionic) were irradiated with gamma-rays at a room remperature, the residual concentration, products, surface tension, and forming power were examined by colorimetric method, IR spectrophotometric method, gaschromatography, Ross-Miles method, and Traube's stalagnometer etc.. These surfactants were decomposed by the irradiation and thus the surface tension increased and the forming power, on the contrary, decreased with dose. Radiation chemical yields (G-value) of the degradation were about 1 for the solutions of SDS and CTAC, and about 0.3 for the POE solution. From the experimental results, it was found that following chemical reactions seem to occur followed by the radiolysis of water; a) bond cleavage of ester for SDS, of CN for CTAC, and of oxyethylene for POE, b) hydrogen abstraction from the surfactants, c) production of CO bond in the presence of dissolved oxygen.     

Effect of Substituents on the Homopolymerization Activity of Methyl Alkyl Diallyl Ammonium Chloride

Among nitrogen-containing cationic electrolytes, diallyl quaternary ammonium salt is a typical monomer with the highest positive charge density, which has attracted the most attention, especially in the research on homopolymers and copolymers of dimethyl diallyl ammonium chloride (DMDAAC), which occupy a very unique and important position. In order to improve the lipophilicity of substituted diallyl ammonium chloride monomers under the premise of high cationic charge density, the simplest, most direct, and most efficient structure design strategy was selected in this paper. Only one of the substituents on DMDAAC quaternary ammonium nitrogen was modified by alkyl; the substituents were propyl and amyl groups, and their corresponding monomers were methyl propyl diallyl ammonium chloride (MPDAAC) and methyl amyl diallyl ammonium chloride (MADAAC), respectively. The effect of substituent structure on the homopolymerization activity of methyl alkyl diallyl ammonium chloride was illustrated by quantum chemical calculation and homopolymerization rate determination experiments via ammonium persulfate (APS) as the initiator system. The results of quantum chemistry simulation showed that, with the finite increase in substituted alkyl chain length, the numerical values of the bond length and the charge distribution of methyl alkyl diallyl ammonium chloride monomer changed little, with the activation energy of the reactions in the following order: DMDAAC < MPDAAC < MADAAC. The polymerization activities measured by the dilatometer method were in the order DMDAAC > MPDAAC > MADAAC. The activation energies E_a of homopolymerization were 96.70 kJ/mol, 97.25 kJ/mol, and 100.23 kJ/mol, and the rate equation of homopolymerization of each monomer was obtained. After analyzing and comparing these results, it could be easily found that the electronic effect of substituent was not obvious, whereas the effect of the steric hindrance was dominant. The above studies have laid a good foundation for an understanding of the polymerization activity of methyl alkyl diallyl ammonium chloride monomers and the possibility of preparation and application of these polymers with high molecular weight.     

Novel Enzymatic Potentiometric Approaches for Surfactant Analysis

The present study described a novel application of simple potentiometric enzymatic method for analysis of surfactants based on their inhibitory effect on acetylcholinesterase enzyme (AChE). The enzymatic activity was measured through monitoring hydrolysis of acetylcholine (ACh) with a disposable acetylcholine potentiometric sensor. Comprehensive investigations were carried out including the effect of incubation time, cholinesterase enzyme and the working calibration ranges. Based on inhibition of AChE, different cationic, anionic and nonionic surfactants were determined in the concentration range from 0 to 40 μg mL⁻¹ with detection limits reaching 0.07 μg mL⁻¹ depending on the nature of surfactants. The degree of AChE inhibition caused by different tested surfactants were as follows: cetylpyridinium chloride (CPC) > benzyldimethylhexadecyl ammonium chloride (BDHAC) > Hyamine (Hy)>cetyltrimethylammonium bromide (CTAB) > Triton X‐100 (TX‐100) > sodium dodecyl sulphate (SDS). The proposed method was applied for determination of surfactants in pharmaceutical formulation, detergents products and environmental samples with acceptable sensitivity and reproducibility.     

Study on cloud points of Triton X-100-cationic gemini surfactants mixtures: A spectroscopic approach

This study investigates the effects of various cationic surfactants on the cloud point (CP) of the nonionic surfactant Triton X-100 (TX-100) in aqueous solutions. Instead of visual observation, a spectrophotometer was used for measurement of the cloud point temperatures. The values of CPs for Triton X-100 can be measured directly because TX-100 has an average number of oxyethylene units per molecule of p ≈ 9.5 and a CP = 66.0 °C. Quaternary ammonium dimeric surfactants (m-s-m, m = 10, 12, and 16, and s = 2, 6, and 10) were synthesized and used. The melting temperature T_M and the Krafft temperature T_K were measured for 1 wt% aqueous solutions of these synthesized surfactants. The melting temperature of the solid gemini surfactants increased with the carbon number of the alkyl chain. The results showed that additions of the gemini surfactants (which are infinitely miscible with water) to Triton X-100 increased the cloud point of the TX-100 solutions. All salts tested in these studies had a large effect on the CPs of nonionic surfactants due to their effect on water structure and their hydrophilicity. The effect of the alkyl chain length of the gemini surfactant on the CP of Triton X-100 is therefore more important than the spacer chain length.     

Synthesis,surface activity,and corrosion inhibition of dentritic quaternary ammonium salt-type tetrameric surfactants

The dentritic quaternary ammonium salt-type tetrameric surfactant (4C₁₂tetraQ) was synthesized, and the molecular structure was confirmed by ¹H NMR and FTIR. The surface activity of 4C₁₂tetraQ was investigated by surface tension, and surface chemical parameters, such as critical micelle concentration (cmc), efficiency (pC₂₀), effectiveness (π_cmc), the surface tension value at cmc (γ_cmc), minimum surface area (A_min), maximum surface excess (Γ_max), and cmc/C₂₀ were obtained from the measurement results. The results show that the 4C₁₂tetraQ surfactant has higher surface activity than the traditional monomeric surfactants (dodecyl trimethyl ammonium bromide, DTAB). The Krafft points were taken as <0°C, indicating that the synthesized tetrameric surfactants had good water solubility. Free energies of micellization and adsorption show that 4C₁₂tetraQ display greater propensity to absorb at the interface than form micelle in the bulk of the aqueous solution, and that the two processes are spontaneous. The measurement results show that 4C₁₂tetraQ has good emulsification power and foam performance. The corrosion efficiency was evaluated with the loss weight method in 1?mol/L HCl solution, and the results show that the 4C₁₂tetraQ surfactant has good corrosion inhibition, and can be considered as a corrosion inhibitor.