Heteroleptic palladium(II) complexes containing N-heterocyclic carbenes and 4-phenyl-1H-1,2,3-triazole: Synthesis,characterization, and catalytic application

Abstract

Reaction of the dimeric N-heterocyclic carbene (NHC) palladium compounds [Pd(μ-Cl)(Cl)(NHC)]₂ with 4-phenyl-1H-1,2,3-triazole gave four mono- and dinuclear complexes 1–4. Mononuclear complexes 1 and 2 [(NHC)PdCl₂(4-phenyl-1H-1,2,3-triazole)] were obtained when the reactions were performed in CH₂Cl₂, whereas dinuclear complexes 3 and 4 [Pd₂(μ-Cl)(μ-4-phenyl-1H-1,2,3-triazole)Cl₂(NHC)₂] were obtained when the reactions were performed in THF in reflux with Et₃N as the base. Further explorations of the catalytic properties of 1–4 for Pd-catalyzed transformations have been performed and these complexes exhibited moderate to high catalytic activities for Suzuki–Miyaura coupling and arylation of benzoxazoles with aryl bromides.     

Mono- and dinuclear cyclopalladates as catalysts for Suzuki–Miyaura cross-coupling reactions in predominantly aqueous media

Suzuki–Miyaura cross-coupling reactions of aryl halides with arylboronic acids were performed in predominantly aqueous media employing two mono- and two dinuclear cyclopalladated complexes as catalysts. These complexes are [Pd(HL)Cl] (I), [Pd(L)(PPh₃)] (II), [Pd₂(μ-dppb)(L)₂] (III) and [Pd₂(μ-dppf)(L)₂] (IV); where H₂L, dppb and dppf represent 4-methoxy-N′-(mesitylidene)benzohydrazide, 1,4-bis(diphenylphosphino)butane and 1,1′-bis(diphenylphosphino)ferrocene, respectively. The reactions were conducted using potassium carbonate as base in presence of tetrabutylammonium bromide (TBAB) at 70/90 °C in dimethylformamide–water (1:20) mixture. Among the four catalysts used, the dinuclear complex IV turned out to be the most effective and afforded moderate to excellent yields with broad substrate scope.     

The first structurally characterized N-heterocyclic carbene complex with a ligand derived from pyrimidine

Oxidative addition of N-alkyl-2-halopyrimidinium cations to [Pd(PPh₃)₄] gives straightforward access to the cationic complexes [(PPh₃)₂(NHC)PdX]BF₄ (3a,b) with pyrimidine-derived NHC-ligands. The new complexes were fully characterized including X-ray crystallography.     

Dinuclear PdII complexes bearing mixed NHC/Py/PPh3 donor set ligands: Catalytic applications and electrochemical investigations

Bimetallic palladium(II) complexes containing classical NHC donor ligands are becoming increasingly popular owing to their various catalytic applications. However, examples of the aforementioned complexes with mixed NHC/PPh₃ ligands are still rare. Bimetallic palladium(II) complexes possessing these mixed ligands are described starting from a C2-symmetric bis-imidazolium salt containing 4,4′-substituted central biphenyl ring. All the palladium(II) complexes have been tested as precatalysts in α-arylation of oxindole and Suzuki–Miyaura coupling reactions. The complex composed of mixed NHC/PPh₃ donor ligands shows superior catalytic activity compared with the corresponding PEPPSI type complexes when applied in α-arylation of oxindole. The dinuclear complexes display better activity compared with the mononuclear complexes. The preliminary electrochemical measurements show the facile oxidation of Pd^II in the presence of combined NHC/PPh₃ ligands compared with a combination of NHC/Py ligands.     

(N-Heterocyclic carbene) ion-pair palladium complexes: Suzuki–Miyaura cross-coupling studies in neat water under mild conditions

The synthesis and characterization of a series of (N-heterocyclic carbene)PdCl₃⁻(NMe₃H)⁺ ion-pair complexes are presented. Applying the quaternary ammonium salt as the function with NHC–Pd(II) complexes yields the new ion-pair complexes. The NHC–Pd(II) ion-pair complexes work well by undergoing the Suzuki–Miyaura reaction with aryl chloride substrates in water under mild conditions in air at room temperature. Twenty products resulting from Suzuki–Miyaura coupling reactions carried out in the presence of the new NHC–Pd(II) ion-pair complex under mild optimal conditions were examined to determine the optimum yields.     

Catalytic activity of Fe(II) and Cu(II) PNP pincer complexes for Suzuki coupling reaction

Iron and copper PNP pincer complexes of the type [Fe(L)SO₄] and [Cu(L)OCOCH₃] are reported and represented as C‐1 and C‐2 catalyst. Both the complexes were synthesized using bis(diphenylphosphino)pyridine‐2,6‐diamine [L], and salts of ‘Fe’ and ‘Cu’ by direct coordination method. The as synthesized complexes were characterized using FTIR, UV–Vis, mass analysis and TGA. The effect of reaction time, catalyst load, solvent and base on the reaction between phenylboronic acid and para substituted bromobenzenes in the presence of the catalysts were investigated for evaluating the catalytic efficiency of the complexes. The results obtained highlight the enhanced C‐C coupling reactions with the use of 0.4 mol% of the catalyst C‐1 in 14 h and 0.6 mol% of C‐2 in 16 h respectively with Cs₂CO₃ base and ACN as solvent media. Of the two complexes reported, C‐1 with iron as catalytically active metal is more stable and active towards coupling which is reflected in its better coupling yields in lesser reaction time compared to copper bearing C‐2 complex.     

Synthesis of ruthenium and palladium complexes from glycosylated 2,2′-bipyridine and terpyridine ligands

A series of glucosylated mono- and di-(1H-1,2,3-triazol-4-yl)pyridines were prepared from glucosyl azides and 2-ethynyl and 2,6-diethynyl pyridine via Click reaction. Glucosylation of the silver salt of 4-hydroxy-2,2′-bipyridine with acetobromoglucose afforded the corresponding glucosylated 2,2′-bipyridine. Treatment of five examples of the latter pyridine ligands with [cis-Ru(bipy)2Cl₂], [Ru(tpy)Cl₃] or [Pd(COD)Cl₂] gave the corresponding ruthenium(II) and palladium(II) complexes in 62%-quantitative yield.     

Coordination polymers of silver(I) with bis(N-heterocyclic carbene): Structural characterization and carbene transfer

Reactions of the ethylene- and methylene-bridged bis(imidazolium) salts with an equivalent amount of silver oxide in dichloromethane at room temperature produced readily the silver NHC compounds [Ag₂LBr₂]. These compounds are partially soluble in DMF. The X-ray structure determination on 3d (L = 1,1′-dibenzyl-3,3′-ethylenediimidazolin-2,2′-diylidene) reveals the formation of bromide bibridged (Ag₂LBr₂)_n chains and a unique supramolecular motif with weak Ag?Ag interactions of 3.429 Å. Similar to monomeric silver(I) NHC complexes, the silver coordination polymers can also act as carbene transfer reagents for the formation of chelating palladium NHC complexes in excellent yields.     

Butylene linked palladium N-heterocyclic carbene complexes: Synthesis and catalytic properties

New bis(NHC)-Pd complexes were synthesized and characterized by elemental analysis, ¹H NMR, ¹³C NMR, and IR spectroscopy. The reaction of Pd(OAc)₂ and bis(benzimidazolium) salts in DMSO gave the monomeric palladium complex in which the N-heterocyclic carbene was bound to the metal centre. The crystal and molecular structure of the cis-dibromo{1,1′-di[2,3,4,5,6-pentamethylbenzyl]-3,3′-butylenedibenzimidazol-2,2′-diylidene}-palladium(II) complex was determined by single-crystal X-ray diffraction. The activity of the Pd(II) complexes in the direct arylation of benzothiazole with arylbromides was investigated. A preliminary catalytic study showed that these bis(NHC)-Pd complexes were highly active in the direct arylation of benzothiazole with arylbromides.     

Structure and spectroscopic properties of the dimeric copper(I) N‐heterocyclic carbene complex [Cu2(CNCt‐Bu)2](PF6)2

In recent years, the use of copper N‐heterocyclic carbene (NHC) complexes has expanded to fields besides catalysis, namely medicinal chemistry and luminescence applications. In the latter case, multinuclear copper NHC compounds have attracted interest, however, the number of these complexes in the literature is still quite limited. Bis[μ‐1,3‐bis(3‐tert‐butylimidazolin‐2‐yliden‐1‐yl)pyridine]‐1κ⁴C²,N:N,C^2′;2κ⁴C²,N:N,C^2′‐dicopper(I) bis(hexafluoridophosphate), [Cu₂(C₁₉H₂₅N₅)₂](PF₆)₂, is a dimeric copper(I) complex bridged by two CNC, i.e. bis(N‐heterocyclic carbene)pyridine, ligands. Each Cu^I atom is almost linearly coordinated by two NHC ligands and interactions are observed between the pyridine N atoms and the metal centres, while no cuprophilic interactions were observed. Very strong absorption bands are evident in the UV–Vis spectrum at 236 and 274 nm, and an emission band is observed at 450 nm. The reported complex is a new example of a multinuclear copper NHC complex and a member of a compound class which has only rarely been reported.     

Palladium(II)-N-heterocyclic carbene-catalyzed direct C2- or C5-arylation of thiazoles with aryl bromides

Herein we report, a series of new benzimidazolium chlorides as N-heterocyclic carbene (NHC) ligand and their corresponding palladium(II)-NHC complexes with the general formula [PdCl₂(NHC)₂] were synthesized. All new compounds were characterized by ¹H NMR, ¹³C NMR, IR spectroscopy and elemental analysis techniques. The catalytic activity of palladium(II)-NHC complexes was investigated in the direct C2- or C5-arylation of thiazoles with aryl bromides in presence of palladium(II)-NHC at 150?°C for 1?h. These complexes exhibited the good catalytic performance for the direct arylation of thiazoles. The arylation of thiazoles regioselectively produced C2- or C5-arylated thiazoles in moderate to high yields.     

The far-infrared spectra of pyridine complexes of transition metal(II) isothiocyanates

The infrared spectra (500–140 cm^?1) of the complexes [M(pyridine)_n(NCS)₂] (n = 2, M = Mn, Co, Ni, Cu, or Zn; n = 4, M = Mn, Fe, Co, or Ni) are discussed. The v/M-pyridine and v/M-NCS bands are assigned by observing the band shifts induced by isotopic labelling of the coordinated pyridine and isothiocyanate, by comparing the spectra with those of the [M(pyridine)₂Cl₂] complexes and from symmetry considerations based on their known structures. The two types of metal-ligand stretching bands occur within a rather narrow frequency range and there is evidence of some vibrational coupling between these two modes. Some earlier assignments of vM-pyridine bands require revision. The spectra of the yellow [Fe(py)₄(NCS)₂] complex and its violet oxidation product suggest that the oxidation reaction involves the transformation of trans-[Fe(py)₄(NCS)₂] into cis-[Fe(py)₃(NCS)₃]     

Palladium(II)-catalyzed Suzuki–Miyaura reactions of arylboronic acid with aryl halide in water in the presence of 4-(benzylthio)-N,N,N-trimethybenzenammonium chloride

This work reported that Suzuki–Miyaura coupling reactions of arylboronic acid with aryl bromide or iodides were mediated by Pd(OAc)₂ and 4-(benzylthio)-N,N,N-trimethylbenzenammonium chloride in the presence of Na₂CO₃ in water under the mild conditions. The corresponding Suzuki–Miyaura coupling products were obtained in good to excellent yields.     

Indolyl Phosphine Nickel(II) Fluorido Complexes: Synthesis and Intermediates in Suzuki–Miyaura Cross-Coupling Reactions

The C−F bond activation of pentafluoropyridine and 2,3,5,6-tetrafluoropyridine at [Ni(cod)₂] (cod=1,5-cyclooctadiene) in the presence of the phosphine PPh₂(Ind) (Ind=3-methyl-2-indolyl) led to the formation of the nickel(II) fluorido bis(phosphine) complexes trans-[Ni(F)(2-C₅NF₄){PPh₂(Ind)}₂] and trans-[Ni(F)(2-C₅HNF₃){PPh₂(Ind)}₂]. The complexes are characterized by the presence of intramolecular hydrogen bonds between the NH group of the phosphine ligands and the fluorido ligand. Stochiometric model reactions of nickel(II) fluorido complexes with PhB(OH)₂ revealed that the former can be considered as intermediates in Suzuki–Miyaura cross coupling reactions. Catalytic experiments were attempted using 10 mol-% of trans-[Ni(F)(2-C₅NF₄){PPh₂(Ind)}₂] as catalyst and the activities of the PPh₂(Ind) complex were compared to the ones of an analogous nickel(II) fluorido complex, bearing PPh₃ instead of PPh₂(Ind) as ligands. The latter exhibited a somewhat lower catalytic activity suggesting a slight influence of the H-bonds in the outer coordination sphere.     

Rhodium and iridium complexes of N-heterocyclic carbenes: Structural investigations and their catalytic properties in the borylation reaction

Bridged and unbridged N-heterocyclic carbene (NHC) ligands are metalated with [Ir/Rh(COD)₂Cl]₂ to give rhodium(I/III) and iridium(I) mono- and biscarbene substituted complexes. All complexes were characterized by spectroscopy, in addition [Ir(COD)(NHC)₂][Cl,I] [COD = 1,5-cyclooctadiene, NHC =  1,3-dimethyl- or 1,3-dicyclohexylimidazolin-2-ylidene] (1, 4), and the biscarbene chelate complexes 12 [(η⁴-1,5-cyclooctadiene)(1,1′-di-n-butyl-3,3′-ethylene-diimidazolin-2,2′-diylidene)iridium(I) bromide] and 14 [(η⁴-1,5-cyclooctadiene)(1,1′-dimethyl-3,3′-o-xylylene-diimidazolin-2,2′-diylidene)iridium(I) bromide] were characterized by single crystal X-ray analysis. The relative σ-donor/π-acceptor qualities of various NHC ligands were examined and classified in monosubstituted NHC-Rh and NHC-Ir dicarbonyl complexes by means of IR spectroscopy. For the first time, bis(carbene) substituted iridium complexes were used as catalysts in the synthesis of arylboronic acids starting from pinacolborane and arene derivatives.     

Ferrocenyl iminophosphine ligands in Pd-catalysed Suzuki couplings

A mixture of Pd₂(dba)₃/{η-C₅H₄CHN[CH(CH₃)(Nap)]}Fe[η-C₅H₄P(^tBu)₂] efficiently catalyzes the Suzuki reactions of a variety of bulky aryl halides and aryl- and alkyl-boronic acids, affording the desired cross-coupling biaryl products in quantitative isolated yields under mild conditions and at low (1 × 10⁻⁶-1 mol%) Pd loadings. Spectroscopic (NMR & ESI) analysis of the mixture of Pd₂(dba)₃, the hybrid [P,N] ligands, and aryl halides revealed different structural forms of oxidative addition products that are dependent on the substituent on the imino nitrogen.     

N,N,N′,N′-Tetrakis(2-hydroxyethyl)ethylenediamine palladium(II) complex as efficient catalyst for the Suzuki/Miyaura reaction in water

A new water soluble palladium(II) complex (2) derived from N,N,N′,N′-tetrakis(2-hydroxyethyl)ethylenediamine (edteH₄) (1) was synthesized in high yield and characterized by ¹H, ¹³C, HMQC and COSY NMR spectroscopy. X-ray diffraction studies on a single crystal of 2 confirmed the cis square planar geometry; the edteH₄ ligand (1) is κ² (N,N)-coordinated with four pendant CH₂CH₂OH groups. This new complex [PdCl₂(edteH₄)] (2) and the previously synthesized triethanolamine complex [Pd(OCH₂CH₂N(CH₂CH₂OH)₂)₂] (3) were tested as catalysts for the Suzuki/Miyaura cross-coupling reaction of various aryl bromides with phenylboronic acid in water. Electronically activated aryl bromides, such as 4-bromoacetophenone and 4-bromobenzaldehyde undergo the cross-coupling with extremely high turnover numbers (TON) of up to 1,00,000 without organic solvent.     

Enhanced π‐back‐donation resulting in the trans labilization of a pyridine ligand in an N‐heterocyclic carbene (NHC) PdII precatalyst: a case study

The molecular structure of the benzimidazol‐2‐ylidene–PdCl₂–pyridine‐type PEPPSI (pyridine‐enhanced precatalyst, preparation, stabilization and initiation) complex {1,3‐bis[2‐(diisopropylamino)ethyl]benzimidazol‐2‐ylidene‐κC²}dichlorido(pyridine‐κN)palladium(II), [PdCl₂(C₅H₅N)(C₂₃H₄₀N₄)], has been characterized by elemental analysis, IR and NMR spectroscopy, and natural bond orbital (NBO) and charge decomposition analysis (CDA). Cambridge Structural Database (CSD) searches were used to understand the structural characteristics of the PEPPSI complexes in comparison with the usual N‐heterocyclic carbene (NHC) complexes. The presence of weak C—H…Cl‐type hydrogen‐bond and π–π stacking interactions between benzene rings were verified using NCI plots and Hirshfeld surface analysis. The preferred method in the CDA of PEPPSI complexes is to separate their geometries into only two fragments, i.e. the bulky NHC ligand and the remaining fragment. In this study, the geometry of the PEPPSI complex is separated into five fragments, namely benzimidazol‐2‐ylidene (Bimy), two chlorides, pyridine (Py) and the Pd^II ion. Thus, the individual roles of the Pd atom and the Py ligand in the donation and back‐donation mechanisms have been clearly revealed. The NHC ligand in the PEPPSI complex in this study acts as a strong σ‐donor with a considerable amount of π‐back‐donation from Pd to C_carbene. The electron‐poor character of Pd^II is supported by π‐back‐donation from the Pd centre and the weakness of the Pd—N(Py) bond. According to CSD searches, Bimy ligands in PEPPSI complexes have a stronger σ‐donating ability than imidazol‐2‐ylidene ligands in PEPPSI complexes.     

Square-planar dichloro palladium complexes with trans-configurated phosphine ligands avoiding ortho-metallation: Ligand design, complex synthesis, molecular structure and catalytic potential for Suzuki cross-coupling reactions

The square-planar palladium complexes trans-[PdCl₂(PPh₂-CH₂-2,4,6-C₆H₂Me₃)₂] (1) and trans-[PdCl₂(η²-PPh₂-CH₂-2,4,6-C₆HMe₃-CH₂-2,4,6-C₆HMe₃-CH₂-PPh₂)] (2) have been synthesized from [PdCl₂(cod)] (cod = 1,5-cyclooctadiene) and the corresponding new phosphine or diphosphine ligands. The single-crystal X-ray structure analysis reveals for both complexes a trans arrangement of the two chlorine and of the two phosphorus atoms. In both cases, ortho-metallation leading to palladacycles is not possible, since all ortho positions in the benzylic rings of 1 and 2 are blocked by methyl substituents. Both complexes are found to catalyze Suzuki cross-coupling reactions of deactivated and even bulky arene substrates.     

Preparation and characterisation of mononuclear Pd(II) complexes with 1,8-bis(3,5-dimethyl-1-pyrazolyl)-3,6-dithiaoctane (bddo) ligand: Spectroscopy studies and crystal structure of trans-[Pd(SCN)2(bddo)]

Mononuclear palladium(II) complexes containing a pyrazole-thioether ligand, with general formula trans-[Pd(X)₂(bddo)] (X = CN⁻ (1), SCN⁻ (2) or N₃⁻ (3); bddo = 1,8-bis(3,5-dimethyl-1-pyrazolyl)-3,6-dithiaoctane), have been prepared. Similar reactivity carried out with pyridine or triphenylphosphine has been assayed. When pyridine is used, a mixture of [Pd(bddo)(py)₂](BF₄)₂ ([4](BF₄)₂) and [Pd(bddo)](BF₄)₂ is obtained. When triphenylphosphine is used, only [Pd(bddo)](BF₄)₂ is obtained. The complexes have been characterised by elemental analyses, conductivity measurements, IR and NMR spectroscopies. X-ray crystal structure of trans-[Pd(SCN)₂(bddo)] (2) is presented. In this complex the metal atom is coordinated by the two azine nitrogen atoms of the pyrazole rings and two SCN⁻ anions in trans disposition.