Enthalpy and entropy of activation and the heat effect of the ene reaction between 4-phenyl-1,2,4-triazoline-3,5-dione and 2,3-dimethyl-2-butene in solution

The rate of the fastest ene reaction between 4-phenyl-1,2,4-triazoline-3,5-dione (1) and 2,3-dimethyl-2-butene (2) is studied by means of stopped flow in solutions of benzene (k ₂ = 55.6 ± 0.5 and 90.5 ± 1.3 L mol^?1 s^?1 at 23.3 and 40°C) and 1,2-dichloroethane (335 ± 9 L mol^?1 s^?1 at 23.5°C). The enthalpy of reaction (?139.2 ± 0.6 kJ/mol in toluene and ?150.2 ± 1.4 kJ/mol in 1,2-dichloroethane) and the enthalpy (20.0 ± 0.5 kJ/mol) and entropy (144 ± 2 J mol^?1 K^?1) of activation are determined. A clear correlation is observed between the reaction rate and ionization potential in a series of ene reactions of 4-phenyl-1,2,4-tri-azoline-3,5-dione with acyclic alkenes.     

Thermochemistry for enthalpies and reaction paths of nitrous acid isomers

Recent studies show that nitrous acid, HONO, a significant precursor of the hydroxyl radical in the atmosphere, is formed during the photolysis of nitrogen dioxide in soils. The term nitrous acid is largely used interchangeably in the atmospheric literature, and the analytical methods employed do not often distinguish between the HONO structure (nitrous acid) and HNO₂ (nitryl hydride or isonitrous acid). The objective of this study is to determine the thermochemistry of the HNO₂ isomer, which has not been determined experimentally, and to evaluate its thermal and atmospheric stability relative to HONO. The thermochemistry of these isomers is also needed for reference and internal consistency in the calculation of larger nitrite and nitryl systems. We review, evaluate, and compare the thermochemical properties of several small nitric oxide and hydrogen nitrogen oxide molecules. The enthalpies of HONO and HNO₂ are calculated using computational chemistry with the following methods of analysis for the atomization, isomerization, and work reactions using closed‐ and open‐shell reference molecules. Three high‐level composite methods G3, CBS‐QB3, and CBS‐APNO are used for the computation of enthalpy. The enthalpy of formation, ΔH^o_f(298 K), for HONO is determined as ?18.90 ± 0.05 kcal mol^?1 (?79.08 ± 0.2 kJ mol^?1) and as ?10.90 ± 0.05 kcal mol^?1 (?45.61 ± 0.2 kJ mol^?1) for nitryl hydride (HNO₂), which is significantly higher than values used in recent NO_x combustion mechanisms. H‐NO₂ is the weakest bond in isonitrous acid; but HNO₂ will isomerize to HONO with a similar barrier to the HO? NO bond energy; thus, it also serves as a source of OH in atmospheric chemistry. Kinetics of the isomerization is determined; a potential energy diagram of H/N/O₂ system is presented, and an analysis of the triplet surface is initiated. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 378–398, 2007     

Chemical equilibria 6. Measurement of equilibrium constants for the dehydrogenation of 2-methylpropan-1-ol by a vapour-flow technique

Equilibrium constants for 2-methylpropan-1-ol + 2-methylpropanal + hydrogen have been calculated from measurements of the composition of mixtures formed by passing the vapour over a catalyst at several temperatures in the range 473 to 563 K. Equations relating the changes in enthalpy and entropy of the dehydrogenation reaction to temperature were derived from the equilibrium constants with the aid of heat capacities. By coupling these changes with other thermodynamic data, the standard enthalpy of formation and the standard entropy of 2-methylpropanal at 298.15 K were calculated to be ?(215.7 ± 1.3) kJ mol^?1 and (331.2 ± 1.7) J K^?1 mol^?1 respectively, in the gas state, and ?(247.3 ± 1.8) kJ mol^?1 and (238.3 ± 4.4) J K^?1 mol^?1 respectively, in the liquid state.     

Dynamic proton magnetic resonance studies on complex spin systems. Non-mutual three-spin exchange in N-(trideuteriomethyl)-2-cyanoaziridine

At room temperature and below, the proton NMR spectrum of N-(trideuteriomethyl)-2-cyanoaziridine consists of two superimposed ABC patterns assignable to two N-invertomers; a single time-averaged ABC pattern is observed at 158.9°C. The static parameters extracted from the spectra in the temperature range from –40.3 to 23.2°C and from the high-temperature spectrum permit the calculation of the thermodynamic quantities ΔH⁰ = ?475±20 cal mol^?1 (?1.987 ± 0.084 kJ mol^?1) and ΔS⁰ = 0.43±0.08 cal mol^?1 K^?1 (1.80±0.33 J mol^?1 K^?1) for the cis ? trans equilibrium. Bandshape analysis of the spectra broadened by non-mutual three-spin exchange in the temperature range from 39.4–137.8°C yields the activation parameters ΔH_tc^≠ = 17.52±0.18 kcal mol^?1 (73.30±0.75 kJ mol^?1), ΔS_tc^≠ = ?2.08±0.50 cal mol^?1 K^?1 (?8.70±2.09 J mol^?1 K^?1) and ΔG_tc^≠ (300 K) = 18.14±0.03 kcal mol^?1 (75.90±0.13 kJ mol^?1) for the trans → cis isomerization. An attempt is made to rationalize the observed entropy data in terms of the principles of statistical thermodynamics.     

Pyrochlore and Perovskite Potassium Tantalate: Enthalpies of Formation and Phase Transformation

Alkali niobates and tantalates are currently important lead‐free functional oxides. The formation and decomposition energetics of potassium tantalum oxide compounds (K₂O?Ta₂O₅) were measured by high‐temperature oxide melt solution calorimetry. The enthalpies of formation from oxides of KTaO₃ perovskite and defect pyrochlores with K/Ta ratio of less than 1 stoichiometry—K_0.873Ta_2.226O₆, K_1.128Ta_2.175O₆, and K_1.291Ta_2.142O₆—were experimentally determined, and the values are (?203.63±2.92) kJ mol^?1 for KTaO₃ perovskite, and (?339.54±5.03) kJ mol^?1, (?369.71±4.84) kJ mol^?1, and (?364.78±4.24) kJ mol^?1, respectively, for non‐stoichiometric pyrochlores. That of stoichiometric defect K₂Ta₂O₆ pyrochlore, by extrapolation, is (?409.87±6.89) kJ mol^?1. Thus, the enthalpy of the stoichiometric pyrochlore and perovskite at K/Ta=1 stoichiometry are equal in energy within experimental error. By providing data on the thermodynamic stability of each phase, this work supplies knowledge on the phase‐formation process and phase stability within the K₂O?Ta₂O₅ system, thus assisting in the synthesis of materials with reproducible properties based on controlled processing. Additionally, the relation of stoichiometric and non‐stoichiometric pyrochlore with perovskite structure in potassium tantalum oxide system is discussed.     

The isomolecular exchange reaction Ga2S(g) + In2S(g) = 2 InGaS(g)

Equilibria involving the molecules Ga₂S(g), In₂S(g), and InGaS(g), by the reaction Ga₂S(g) + In₂S(g) = 12InGaS(g) were investigated between 1060–1350 K by the Knudsen-effusion, mass-spectrometric method. The reaction enthalpy at 298 K was calculated to be 0±1 kJ mol⁻¹. The enthalpy of formation of InGaS at 298 K and the enthalpy of atomization of InGaS at 298 K were calculated to be 80±18 kJ mol⁻¹ and 710±18 kJ mol⁻¹, respectively. The equilibrium constant and the enthalpy of reaction indicated that the three gaseous molecules have a bent triatomic structure in which S is a center atom and no bond between metals.     

A consistent model for the thermal decomposition of NCN3 and the singlet– triplet relaxation of NCN

The thermal decomposition of cyanogen azide (NCN₃) and the subsequent collision‐induced intersystem crossing (CIISC) process of cyanonitrene (NCN) have been investigated by monitoring excited electronic state ¹NCN and ground state ³NCN radicals. NCN was generated by the pyrolysis of NCN₃ behind shock waves and by the photolysis of NCN₃ at room temperature. Falloff rate constants of the thermal unimolecular decomposition of NCN₃ in argon have been extracted from ¹NCN concentration–time profiles in the temperature range 617 K <T< 927 K and at two different total densities: k(ρ ≈ 3 × 10^?6 mol/cm³)/s^?1=4.9 × 10⁹ × exp (?71±14 kJ mol^?1/RT) (± 30%); k(ρ ≈ 6 × 10^?6 mol/cm³)/s^?1=7.5 × 10⁹ × exp (‐71±14 kJ mol^?1/RT) (± 30%). In addition, high‐temperature ¹NCN absorption cross sections have been determined in the temperature range 618 K <T< 1231 K and can be expressed by σ /(cm²/mol)= 1.0 × 10⁸ ?6.3 × 10⁴ K^?1 × T (± 50%). Rate constants for the CIISC process have been measured by monitoring ³NCN in the temperature range 701 K <T< 1256 K resulting in k_CIISC (ρ ≈ 1.8 ×10^?6 mol/cm³)/ s^?1=2.6 × 10⁶× exp (‐36±10 kJ mol^?1/RT) (± 20%), k_CIISC (ρ ≈ 3.5×10^?6 mol/cm³)/ s^?1 = 2.0 × 10⁶ × exp (?31±10 kJ mol^?1/RT) (± 20%), k_CIISC (ρ ≈ 7.0×10^?6 mol/cm³)/ s^?1=1.4 × 10⁶ × exp (?25±10 kJ mol^?1/RT) (± 20%). These values are in good agreement with CIISC rate constants extracted from corresponding ¹NCN measurements. The observed nonlinear pressure dependences reveal a pressure saturation effect of the CIISC process. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 45: 30–40, 2013     

The elimination kinetics and mechanisms of ethyl piperidine‐3‐carboxylate,ethyl 1‐methylpiperidine‐3‐carboxylate,and ethyl 3‐(piperidin‐1‐yl)propionate in the gas phase

The gas‐phase elimination kinetics of the above‐mentioned compounds were determined in a static reaction system over the temperature range of 369–450.3°C and pressure range of 29–103.5 Torr. The reactions are homogeneous, unimolecular, and obey a first‐order rate law. The rate coefficients are given by the following Arrhenius expressions: ethyl 3‐(piperidin‐1‐yl) propionate, log k₁(s^?1) = (12.79 ± 0.16) ? (199.7 ± 2.0) kJ mol^?1 (2.303 RT)^?1; ethyl 1‐methylpiperidine‐3‐carboxylate, log k₁(s^?1) = (13.07 ± 0.12)–(212.8 ± 1.6) kJ mol^?1 (2.303 RT)^?1; ethyl piperidine‐3‐carboxylate, log k₁(s^?1) = (13.12 ± 0.13) ? (210.4 ± 1.7) kJ mol^?1 (2.303 RT)^?1; and 3‐piperidine carboxylic acid, log k₁(s^?1) = (14.24 ± 0.17) ? (234.4 ± 2.2) kJ mol^?1 (2.303 RT)^?1. The first step of decomposition of these esters is the formation of the corresponding carboxylic acids and ethylene through a concerted six‐membered cyclic transition state type of mechanism. The intermediate β‐amino acids decarboxylate as the α‐amino acids but in terms of a semipolar six‐membered cyclic transition state mechanism. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 38: 106–114, 2006     

Variable‐Temperature Infrared Spectroscopy Studies on the Thermodynamics of CO Adsorption on the Zeolite Ca–Y

Variable temperature FT–IR spectroscopy (in the range of 298–380 K) is used to study the thermodynamics of formation of Ca²⁺???CO carbonyl species upon CO adsorption on the faujasite‐type zeolite Ca–Y, and also the (temperature‐dependent) isomerization equilibrium between carbonyl and isocarbonyl (Ca²⁺???OC) species. The standard enthalpy and entropy changes involved in formation of the monocarbonyl species resulted to be ΔH⁰=?50.3 (±0.5) kJ mol^?1 and ΔS⁰=?186 (±5) J mol^?1 K^?1, respectively. Isomerization of the (C‐bonded) Ca²⁺???CO carbonyl to yield the (O‐bonded) Ca²⁺???OC isocarbonyl involves an enthalpy change =+11.4 (±1.0) kJ mol^?1. These results are compared with previously reported data for the CO/Sr–Y system; and also, a brief analysis of enthalpy–entropy correlation for CO adsorption on zeolites and metal oxides is given.     

Interconversion of the Tautomers of 2-Benzylidene-4-Methyl-3-Oxo-Pentanoic Acid Phenylamide During Gas Chromatography

Tautomerization of 2-benzylidene-4-methyl-3-oxo-pentanoic acid phenylamide has been studied by NMR and GC-MS. The two tautomers were separated on an HP-5 column, which enabled the kinetic and the thermodynamic behavior of on-column interconversion to be investigated. The enol-to-imide tautomerization was found to occur primarily in the stationary phase. By treating the column as a reactor, the interconversion was investigated as a function of retention time and oven temperature. This enabled determination of the rate constant (0.0605 s^?1) by monitoring the increase of the less gas stable tautomer at a constant temperature of 260 °C and determination of the activation energy of the reaction for the net tautomerization (52.0 kJ mol^?1), because it was found that the reaction obeyed pseudo first-order kinetics. The enthalpy and the entropy changes (?H=1.68 kJ mol^?1, ?S=3.54 J K^?1 mol^?1) for the enol-to-imide reaction in the stationary phase were also obtained.     

Die Bildungsenthalpie von Zinndijodid,SnJ2 (c)

The heat of reaction for SnJ₂ (c)+J₂ (c)+4045 CS₂ (l)=[SnJ₄; 4045 CS₂] (sol) has been determined to be (?41.12±0.55) kJ mol^?1, [(?9.83±0.13) kcal mol^?1] by isoperibol solution calorimetry. Combining this result with the heat of formation of SnJ₄ in CS₂ determined in a previous investigation¹¹ the value (?153.9±1.40) kJ mol^?1, [(?36.9±0.33) kcal mol^?1] has been derived for the heat of formation, ΔH _f ^ι (SnJ₂;c; 298.15 K), of tin diiodide.     

Study of the kinetics and equilibrium of the benzyl-radical association reaction with molecular oxygen

The forward rate constant, k₁, and the equilibrium constant, K_p, for the association reaction of the benzyl radical with oxygen have been determined. The rate constant k₁ was measured as a function of temperature (between 298 and 398 K) and pressure (at 20 and 760 torr of N₂) by two different techniques, argon-lamp flash photolysis and excimer-laser flash photolysis, both of which employed UV absorption spectroscopy (at 253 nm and 305 nm, respectively) to monitor the benzyl radical concentration. Over the range of conditions studied, we find that the reaction is independent of pressure and is almost independent of temperature, which is in accord with two early studies of the reaction but in apparent disagreement with more recent work. For our results in 760 torr of N₂ and for 298 < T/K < 398, a linear least-squares fitting of the data yield the expression: k₁ = (7.6 ± 2.4) × 10^?13 exp[(190 ± 160) K / T ] cm³ molecule^?1 s^?1. With the flash-photolysis technique, we determined K_p over the temperature range 398–525 K. Experimental values were analyzed alone and combined with theoretically determined entropy values of the benzyl and benzylperoxy radicals to determine the enthalpy of reaction: ΔH = (?91.4 ± 4) kJ mol^?1. Previous work on the benzyl radical enthalpy of formation allows us to calculate ΔH°_{f 298} (Benzylperoxy) = (117 ± 6) kJ mol^?1. In addition, we carried out an RRKM calculation of k₁ using as constraints the thermodynamic information gained by the study of K_p. We find that all the studies of the association reaction are in good agreement once a fall-off effect is taken into account for the most recent work conducted at pressures near 1 torr of helium. © 1994 John Wiley & Sons, Inc.     

Surface segregation measurements of In and S impurities from a dilute Cu(In,S) ternary alloy

The surface segregation of In and S from a dilute Cu(In,S) ternary alloy were measured using Auger electron spectroscopy coupled with a linear programmed heater. The alloy was linearly heated and cooled at constant rates. Segregation data of a linear heat run showed surface segregation of In that reached a maximum surface coverage of 25% followed by S, which reached a coverage of 30%. It was found that after In had reached a maximum surface coverage, it started to desegregate as soon as the S enriched the surface until In was completely replaced by S. The segregation parameters, namely, the pre‐exponential factor (D₀), activation energy (Q), segregation energy (ΔG?) and interaction energy (Ω) were extracted from the measured segregation data for both In and S segregation in Cu by simulating the measured segregation data with a theoretical segregation model (modified Darken model). The segregation parameters obtained for In segregation in Cu are D₀ = 1.8 ± 0.5 × 10^?5 m² s^?1, Q = 184.3 ± 1.0 kJ.mol^?1, ΔG? = ?61.4 ± 1.4 kJ.mol^‐1, Ω_Cu?In = 3.0 ± 0.4 kJ.mol^?1; for S segregation in Cu the parameters are D₀ = 8.9 ± 0.5 × 10^?3 m² s^?1, Q = 212.8 ± 3.0 kJ.mol^?1, ΔG? = ?120.0 ± 3.5 kJ.mol^?1, Ω_Cu?S = 23.0 ± 2.0 kJ mol^?1 and the In and S interaction parameter is Ω_In?S = ?4.0 ± 0.5 kJ.mol^?1. The initial parameters used for the Darken calculations were extracted from fits performed with the Fick's and Guttmann model. Copyright © 2013 John Wiley & Sons, Ltd.     

Dibenzofuran and methyldibenzofuran derivatives: assessment of thermochemical data

Thermochemical data of dibenzofuran, a compound of considerable industrial and environmental significance, obtained from experimental calorimetric and computational techniques are reported in this work. The enthalpy of fusion, (19.4 ± 1.0) kJ mol^?1, at the temperature of fusion, (355.52 ± 0.02) K, was determined by differential scanning calorimetry measurements of dibenzofuran. From the standard (p° = 0.1 MPa) molar enthalpies of formation of crystalline dibenzofuran, (?29.2 ± 3.8) kJ mol^?1, and of sublimation, (84.5 ± 1.0) kJ mol^?1, determined at T = 298.15 K by static bomb combustion calorimetry and by vacuum drop microcalorimetry, respectively, it was possible to calculate the enthalpy of formation of the gaseous compound, (55.0 ± 3.9) kJ mol^?1, at the same temperature. The enthalpy of formation in the gaseous phase was also determined from G3(MP2)//B3LYP calculations. The same computational strategy was employed in the calculation of the standard molar enthalpies of formation, at T = 298.15 K, in the gas-phase, of single methylated derivatives of benzofuran and dibenzofuran.     

Fourier transform-ion cyclotron resonance study of the gas-phase acidities of germane and methylgermane; Bond dissociation energy of germane

An accurate gas-phase acidity for germane (enthalpy scale, equivalent to the proton affinity of GeH₃ ^?), ΔH _acid ^o(GeH₄) = 1502.0 ± 5.1 kJ mol^?1, is obtained by constructing a consistent acidity ladder between GeH₄, and H₂S by using Fourier transform-ion cyclotron resonance spectrometry, and 0 and 298.15 K values for the first bond dissociation energy of GeH₄ are proposed: D₀ ^o(H₃Ge-H) = 352 ± 9 kJ mol^?1; D ^o(H₃Ge-H) = 358 ± 9 kJ mol^?1, respectively. These results are compared with experimental and theoretical data reported in the literature. Methylgermane was found to be a weaker acid than germane by approximately 35 kJ mol^?1: ΔH _acid ^o = 1536.6 kJ mol^?1.     

Thermochemical and structural properties of anthraquinones

We have investigated the energetic, structural, and other physical–chemical properties (aromaticity, intrinsic strain, hydrogen bond interaction) of 1,4-anthraquinone (1), its better known isomer 9,10-anthraquinone (2) and the derivatives 9-hydroxy-1,4-anthraquinone (3) and 9-methoxy-1,4-anthraquinone (4). In particular, the standard enthalpy of formation in the gas phase at 298.15 K of 1,4-anthraquinone was determined [ $\Updelta_{\text{f}}^{{}} H_{\text{m}}^{\text{o}} \left( {{\text{g}},{\mathbf{1}}} \right) \, = \, - 4 4. 9 { } \pm { 5}. 7\;{\text{kJ}}\;{\text{mol}}^{ - 1} ]$ . Using isodesmic/homodesmotic reaction schemes, we have experimentally estimated: (i) the stabilization energy of 1 (162.2 ± 7.2 kJ mol^?1) and 2 (193.2 ± 5.2 kJ mol^?1), (ii) strength of intramolecular hydrogen bonding in 3 (HB = 79.8 ± 10.8 kJ mol^?1), and (iii) additional strain energy due to peri-oxygen interaction in 4 (?34.2 ± 7.6 kJ mol^?1). A computational study of these species, at the B3LYP/6-311++G(3df,2p) level, sheds light on structural, aromatic, intrinsic strain, or hydrogen bond effects and further confirmed the consistency of the experimental results.     

Zur Thermochemie der Zinnhalogenide

The enthalpy change of the reaction at 298 K between Br₂ (l) and Sn(c) in CS₂ as solvent giving SnBr₄ (s) has been determined by calorimetry to be (?374, 2±1.4) kJ·mol^?1, [(?89.45±0.33) kcal·mol^?1]. By the same method the heat of solution of SnBr₄ (c) in CS₂ has been found to be (11.9±0.3) kJ·mol^?1, [(2.84±0.08) kcal·mol^?1]. Combining these results, a value of (?386.1±1.5) kJ·mol^?1, [(?92.3±0.4) kcal·mol^?1] is derived for the standard heat of formation of SnBr₄ (c). Substituting this figure in the thermochemical cycle hitherto used for calculating the heat of formation of SnBr₄ (c) gives ?124.3 kcal·mol^?1 for the standard heat of formation of SnCl₄ (l), which is in reasonable agreement with a recent determination of this quantity⁸.     

Kinetics of the thermal unimolecular decomposition of hex-1-ene-3-yne. Heat of formation and resonance stabilization energy of the 3-ethenylpropargyl radical

The thermal unimolecular decomposition of hex-1-ene-3-yne (HEY) has been investigated over the temperature range 949–1230 K using the technique of very low-pressure pyrolysis (VLPP). One reaction pathway is the expected C₅? C₆ bond fission to form the resonance-stabilized 3-ethenylpropargyl radical. There is a concurrent process producing molecular hydrogen which probably occurs via the intermediate formation of hexatrienes and cyclohexa-1,3-diene. RRKM calculations yield the extrapolated high-pressure rate parameters at 1100 K given by the expressions 10^16.0±0.3 exp(?300.4 ± 12.6 kJ mol^?1/RT) s^?1 for bond fission and 10^13.2+0.4 exp(?247.7 ± 8.4 kJ mol^?1/RT) for the overall formation of hydrogen. The A factors were assigned from the results of previous studies of related alkynes, alkenes, and alkadienes. The activation energy for the bond fission reaction leads to ΔH [H₂CCHCC?H₂] = 391.9, DH [H₂CCHCCCH₂? H] = 363.3, and a resonance stabilization energy of 56.9 ± 14.0 kJ mol^?1 for the 3-ethenylpropargyl radical, based on a value of 420.2 kJ mol^?1 for the primary C? H bond dissociation energy in alkanes. Comparison with the revised value of 46.6 kJ mol^?1 for the resonance energy of the unsubstituted propargyl radical indicates that the ethenyl substituent (CH₂?CH) on the terminal carbon atom has only a small effect on the propargyl resonance energy. © John Wiley & Sons, Inc.     

Kinetics and mechanism of atmospheric reactions of partially fluorinated alcohols

Gas-phase reactions typical of the Earth’s atmosphere have been studied for a number of partially fluorinated alcohols (PFAs). The rate constants of the reactions of CF₃CH₂OH, CH₂FCH₂OH, and CHF₂CH₂OH with fluorine atoms have been determined by the relative measurement method. The rate constant for CF₃CH₂OH has been measured in the temperature range 258–358 K (k = (3.4 ± 2.0) × 10¹³exp(?E/RT) cm³ mol^?1 s^?1, where E = ?(1.5 ± 1.3) kJ/mol). The rate constants for CH₂FCH₂OH and CHF₂CH₂OH have been determined at room temperature to be (8.3 ± 2.9) × 10¹³ (T = 295 K) and (6.4 ± 0.6) × 10¹³ (T = 296 K) cm³ mol^?1 s^?1, respectively. The rate constants of the reactions between dioxygen and primary radicals resulting from PFA + F reactions have been determined by the relative measurement method. The reaction between O₂ and the radicals of the general formula C₂H₂F₃O (CF₃CH₂? and CF₃?HOH) have been investigated in the temperature range 258–358 K to obtain k = (3.8 ± 2.0) × 10⁸exp(?E/RT) cm³ mol^?1 s^?1, where E = ?(10.2 ± 1.5) kJ/mol. For the reaction between O₂ and the radicals of the general formula C₂H₄FO (? HFCH₂O, CH₂F?HOH, and CH₂FCH₂?) at T = 258–358 K, k = (1.3 ± 0.6) × 10¹¹exp(?E/RT) cm³ mol^?1 s^?1, where E = ?(5.3 ± 1.4) kJ/mol. The rate constant of the reaction between O₂ and the radicals with the general formula C₂H₃F₂O (?F₂CH₂O, CHF₂?HOH, and CHF₂CH₂?) at T = 300 K is k = 1.32 × 10¹¹ cm³ mol^?1 s^?1. For the reaction between NO and the primary radicals with the general formula C₂H₂F₃O (CF₃CH₂? and CF₃?HOH), which result from the reaction CF₃CH₂OH + F, the rate constant at 298 K is k = 9.7 × 10⁹ cm³ mol^?1 s^?1. The experiments were carried out in a flow reactor, and the reaction mixture was analyzed mass-spectrometrically. A mechanism based on the results of our studies and on the literature data has been suggested for the atmospheric degradation of PFAs.     

The retro-aldol mechanism in the pyrolysis kinetics of primary,secondary, and tertiary β-hydroxy ketones in the gas phase

The pyrolysis kinetics of primary, secondary, and tertiary β-hydroxy ketones have been studied in static seasoned vessels over the pressure range of 21–152 torr and the temperature range of 190°–260°C. These eliminations are homogeneous, unimolecular, and follow a first-order rate law. The rate coefficients are expressed by the following equations: for 1-hydroxy-3-butanone, log k₁(s^?1) = (12.18 ± 0.39) ? (150.0 ± 3.9) kJ mol^?1 (2.303RT)^?1; for 4-hydroxy-2-pentanone, log k₁(s^?1) = (11.64 ± 0.28) ? (142.1 ± 2.7) kJ mol^?1 (2.303RT)^?1; and for 4-hydroxy-4-methyl-2-pentanone, log k₁(s^?1) = (11.36 ± 0.52) ? (133.4 ± 4.9) kJ mol^?1 (2.303RT)^?1. The acid nature of the hydroxyl hydrogen is not determinant in rate enhancement, but important in assistance during elimination. However, methyl substitution at the hydroxyl carbon causes a small but significant increase in rates and, thus, appears to be the limiting factor in a retroaldol type of mechanism in these decompositions. © John Wiley & Sons, Inc.