Multicomponent preparation of 1-amidoalkyl-2-naphthols using silica-supported molybdenum oxide (MoO3/SiO2) as a mild and recyclable catalyst

An efficient and direct protocol for the preparation of 1-amidoalkyl-2-naphthols employing a multi-component and one-pot condensation reaction of 2-naphthol, aromatic aldehydes, and acetamide in the presence of MoO₃/SiO₂ under solvent-free conditions is described. The reaction using a catalyst was carried out under mild condition with very high yields up to 93 %. The present approach of this methodology offers several advantages such as shorter reaction times, good yields, low cost, environmentally benign, milder reaction conditions, easy recovery of catalyst, and reusability.     

Solvent extraction of certain rare earth metal ions with 1-(2-pyridylazo)-2-naphthol (PAN)

The solvent extraction of Yb(III) by 1-(2-pyridylazo)-2-naphthol (PAN or HL) in carbon tetrachloride from aqueous—ethanol phase has been investigated as a function of thepH ^X of the polar phase and the concentrations ofPAN or ethanol (EtOH) in the organic phase. It was confirmed that the addition of ethanol to the aqueous phase causes an increase of the Yb(III) distribution coefficient. The equation for the extraction reaction has been suggested as: $$Yb(H_2 O)_{m(^p )}^{3 + } + 3H L_{(o)} + t Et OH_{(o)} \rightleftharpoons Yb L_3 \left( {EtOH} \right)_{t(o)} + 3H_{(^p )}^ + + mH_2 O$$ wheret changes from 0 to 3. The extraction equilibrium constant (K _ex ) and two-phase stability constants (β ₃ ^× ) for the YbL ₃ (EtOH)₃ complex have been evaluated. The formation of solvates YbL ₃ (EtOH) _t is probably the main reason of the synergistic effect which was observed.     

Preparation of Cu (II)/PEI–QPEI/SiO2 nanopowder as antibacterial material

The silica nanoparticles were prepared by the sol–gel process, and then twice modified and grafted by polyethylenimine (PEI) on their surface. After quaternary ammonium reaction and chelated copper reaction, the PEI/SiO₂, QPEI/SiO₂, PEI–QPEI/SiO₂ and Cu (II)/PEI–QPEI/SiO₂ nanopowders were obtained in turn. The morphology and structure of the products were characterized through SEM, EDX, HRTEM, FTIR and element analysis. At the same time, the antibacterial activity of the products to E. coli and Candida were evaluated through quantification and qualitative ways, e.g. microcalorimetric method and culture dish method. The results suggested that the Cu (II)/PEI–QPEI/SiO₂, a novel three-component functional nanopowder, presented the best antibacterial activity to both E. coli and Candida duo to the synergistic sterilization capability of the ammonium salt and copper ions, compared with other products. It indicated that the Cu (II)/PEI–QPEI/SiO₂ nanopowder could be a novel antibacterial nanomaterial to widely application in preventing and minimizing bacteria of the organism and environment in future.     

Magnetic ion imprinted polymer nanoparticles for the preconcentration of vanadium(IV) ions

An ion imprinted polymer coated onto magnetite (Fe₃O₄) nanoparticles is shown to be a useful magnetic sorbent for the fairly selective preconcentration of vanadium. The sorbent was prepared by radical copolymerization of 3-(triethoxysilyl)propyl methacrylate (the monomer), ethylene glycol dimethacrylate (the cross-linker), and the vanadium(IV) complex of 1-(2-pyridylazo-2-naphthol) in the presence of magnetite nanoparticles. The material was characterized by IR spectroscopy, scanning electron microscopy, and thermal analysis. The vanadium(IV) ions were removed from the imprint by a solution containing thiourea and HCl, and the eluent was submitted to AAS. The analytical efficiency and relative standard deviation are 99.4 and ±2.3 %, respectively, under optimum conditions, and the limit of detection is 20 ng mL^?1. The method was successfully applied to the preconcentration and determination of vanadium(IV) ions in crude oil. Figure

An ion imprinted polymer is coated on to magnetite nanoparticles as a useful magnetic sorbent for the fairly selective preconcentration of vanadium which can be used for vanadium determination in crude oil.     

Determination of phenolic components in ethanolic extracts from wood of Maackia amurensis

The phenolic components in an ethanolic extract from the wood of Amur maackia were determined quantitatively by the HPLC method in the isocratic regime using a column with a C₁₉ reversed-phase sorbent and β-naphthol acetate as internal standard. Before injection into the chromatographic column, the extract was purified on a column of Florisil that had been treated with 30% acetic acid. The relative error in the determination of each component at a confidence level of 0.95 does not exceed 7%.     

Penning ionization electron spectrometry of hydrogen chloride

An electron spectrometric study has been performed on HCl using metastable helium and neon atoms as well as neon resonance photons. High resolution electron spectra were obtained with two different beam apparatuses for a mixed He(2¹ S, 2³ S) beam, a pure He(2³ S) beam, and, for the first time, state-selected pure Ne(3s ³ P ₂) and pure Ne(3s ³ P ₀) beams, and for NeI resonance photons. For the system He(2³ S)+HCl the vibrational populationsP(υ′) of the formed HCl⁺ (X ²∏ _i , υ′) and HCl⁺ (A ²Ω⁺, υ′) ions are found to differ from the Franck-Condon factors for unperturbed potentials, indicating slight bond stretching in HCl upon He(2³ S) approach. For He(2¹ S)+HCl the vibrational peak shapes and vibrational populations are substantially different from the He(2³ S) case, pointing to an additional, charge exchanged interaction (He⁺+HCl^?) in the entrance channel of the former system. For the first time, we have detected the electrons in both the He(2¹ S)+HCl and He(2³ S)+HCl spectra associated with the major mechanism for the formation of Cl⁺ ions: energy transfer to repulsive HCl** Rydberg states, dissociating toH(1s) and autoionizing Cl**(¹ D ₂ nl) atoms. For both Ne(³ P ₂)+HCl and Ne(³ P ₀)+HCl, the populationsP(υ′) of both final molecular states HCl⁺ (X, A) agree closely with the Franck-Condon factors at the average relative collision energyē _coll=55 meV and, for HCl⁺ (A ²Ω⁺), also atē _coll=130 meV.     

Stereoselective separation and pharmacokinetic dissipation of the chiral neonicotinoid sulfoxaflor in soil by ultraperformance convergence chromatography/tandem mass spectrometry

Ultraperformance convergence chromatography/tandem triple quadrupole mass spectrometry (UPC²-MS/MS) is a novel tool in separation science that combines the advantages of supercritical fluid chromatography with ultraperformance liquid chromatography/MS/MS technology. The use of nontoxic CO₂ fluid and a postcolumn additive to complement MS/MS allows better control of analyte retention for chiral separation and high-sensitivity determination with different chiral stationary phases. This paper reports the stereoselective separation and determination of the chiral neonicotinoid sulfoxaflor in vegetables and soil by UPC²-MS/MS. Baseline resolution (Rs?≥?1.56) of and high selectivity (LOQ?≤?1.83 μg/kg) for the four stereoisomers were achieved by postcolumn addition of 1 % formic acid–methanol to a Chiralpak IA-3 using CO₂/isopropanol/acetonitrile as the mobile phase at 40 °C, 2,500 psi, and for 6.5 min in electrospray ionization positive mode. Rearranged Van’t Hoff equations afforded the thermodynamic parameters ΔH ^ο and ΔS ^ο, which were analyzed to promote understanding of the enthalpy-driven separation of sulfoxaflor stereoisomers. The interday mean recovery, intraday repeatability, and interday reproducibility varied from 72.9 to 103.7 %, from 1.8 to 9.2 %, and from 3.1 to 9.4 %, respectively. The proposed method was used to study the pharmacokinetic dissipation of sulfoxaflor stereoisomers in soil under greenhouse conditions. The estimated half-life ranged from 5.59 to 6.03 d, and statistically nonsignificant enantioselective degradation was observed. This study not only demonstrates that the UPC²-MS/MS system is an efficient and sensitive method for sulfoxaflor stereoseparation, but also provides the first experimental evidence of the pharmacokinetic dissipation of sulfoxaflor stereoisomers in the environment. Graphical Abstract

Chemical structure and UPC²-MS/MS separation chromatogram of sulfoxaflor. (* stereogenic center)     

Adsorption and inhibition effect of curcumin on mild steel corrosion in hydrochloric acid

The inhibition effect of curcumin on the corrosion of mild steel in 1.0 M HCl solution was studied by weight loss, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) methods. The experimental results suggest that this compound is an efficient corrosion inhibitor and the inhibition efficiency increases with the increase in inhibitor concentration. Adsorption of this compound on mild steel surface obeys Langmuir isotherm. Also the objective of this work is to attempt to find relationships between electronic structure and inhibition efficiency. The structural parameters, such as the frontier molecular orbital energies (E _HOMO and E _LUMO), gap of energy ΔE, from the molecule to iron as well as electronic parameters such as Mulliken atomic populations were calculated and discussed using the Density Functional Theory method (DFT).     

Bromo dimethyl sulfoxide osmium(II) complexes. Molecular structure of cis,fac-[OsBr2(dmso-S)3(dmso-O)]

Bromo dimethyl sulfoxide osmium(II) complexes were synthesized: trans-[OsBr₂(dmso-S)₄] (1) was obtained by the reaction of K₂[OsBr₆] with DMSO in the presence of SnBr₂ at 100°C and cis,fac-[OsBr₂(dmso-S)₃(dmso-O)] (2) was prepared by thermal isomerization of 1 in a DMSO solution at 150°C. The coordination mode of DMSO molecules was determined by IR and ¹H and ¹³C NMR spectroscopy. X-ray diffraction analysis showed that compound 2 crystallizes in the monoclinic system, space group P2₁/n; a = 8.4711(5) Å, b = 27.7876(15) Å, c = 8.5569(5) Å, β = 115.7110(10)°; Z = 4. The coordination polyhedron of osmium is a distorted octahedron; the osmium environment is formed by two cis-arranged bromine atoms and three fac-S-coordinated and one O-coordinated DMSO molecules. The interconversion of complexes in solutions was studied by UV/Vis and ¹H and ¹³C NMR spectroscopy. In chloroform and DMSO, complex 2 isomerizes to cis-[OsBr₂(dmso-S)₄] and (in the light) to 1. The complexes trans-[OsX₂(dmso-d₆)₄], where X = Cl, Br, were isolated from DMSO-d ₆ and characterized by the IR spectra.     

Angular distribution of photo electrons from above-threshold-ionization (ATI) of xenon by 532 nm, 355 nm and 266 nm radiation

A time-of-flight electron energy spectrometer has been used to measure the angular distributions of photoelectrons emitted after the absorption of up to four excess photons above the ionization threshold of Xenon at 532 nm. For shorter wavelength less efficient ATI is observed. The shape of the angular distributions and the branching ratios for the two ionic fine structure states Xe⁺(² P _3/2) and Xe⁺(² P _1/2) may be plausibly attributed to the influence of excited states of the atom.     

Graft copolymers via combination of cationic polymerization and atom transfer radical polymerization and their phase separation into spherical/worm-like nanostructures

Poly(p-chloromethyl styrene)-graft-poly(methyl methacrylate) (PCMS-g-PMMA) and poly(p-chloromethyl styrene)-graft-poly(benzyl methacrylate) (PCMS-g-PBzMA) graft copolymers with asymmetric branches are synthesized via the combination of cationic polymerization and atom transfer radical polymerization (ATRP). The process involves first, the preparation of poly(p-chloromethyl styrene) (PCMS-CH₂Cl) macroinitiator without any cross-linking or side reactions through pendant benzyl chloride (?CH₂Cl) functionality by cationic polymerization using a simple FeCl₃-based initiating system at 25 °C. The as-synthesized PCMS-CH₂Cl, without any transformation, is then used as the macroinitiator to graft PMMA and PBzMA branches by ATRP to produce PCMS-g-PMMA and PCMS-g-PBzMA graft copolymers of varying compositions with controlled molecular weight and moderately narrow polydispersities (M _w/M _n?≤?1.32). The resulting PCMS₂₁ -g-PMMA₂₃₂ graft copolymer in thin film form phase separates into spherical morphology with an average diameter of 170?±?72 nm. Whereas the PCMS₂₁ -g-PBzMA₁₅₆ graft copolymer gives worm-like nanostructures with an average length of 94 nm and width of 31 nm due to phase separation as visualized through atomic force microscopy. On the other hand, the phase-separated morphology is not very well-defined for other graft copolymers (PCMS₁₁₃ -g-PMMA₂₂₇ and PCMS₁₁₃ -g-PBzMA₁₅₄) thin films containing longer PCMS chains. This approach represents a rapid and convenient route to prepare unique spherical/worm-like polymer nanostructures. Figure

Well-defined poly(p-chloromethyl styrene)-graft-poly(methyl methacrylate) (PCMS-g-PMMA) and poly(p-chloromethyl styrene)-graft-poly(benzyl methacrylate) (PCMS-g-PBzMA) graft copolymers with asymmetric branches are synthesized by the combination of living cationic polymerization and atom transfer radical polymerization (ATRP). The resulting PCMS₂₁ -g-PMMA₂₃₂ and PCMS₂₁ -g-PBzMA₁₅₆ graft copolymers phase separate into nanostructured spherical and worm-like morphologies, respectively, in thin film form. The phase-separated morphology is not very well-defined for graft copolymers (PCMS₁₁₃ -g-PMMA₂₂₇ and PCMS₁₁₃ -g-PBzMA₁₅₄) thin films containing longer PCMS chains.     

Cadmium complex possessing simultaneously silanethiolato- and dithiocarbamato-ligands. A novel single-source precursor of cadmium sulfide

Thermal decomposition of suitable coordination compounds may be used as efficient route for fabrication of semiconducting layers. A new potential CdS precursor—a cadmium complex with all-sulfur Cd-coordination sphere [Cd{μ-SSi(OBu ^t )₃}(S₂CNC₄H₈)]₂ 1—has been prepared, and its properties are investigated. The complex was obtained in the reaction between dimeric bis(tri-tert-butoxysilanethiolato)cadmium(II) [Cd{SSi(OBu ^t )₃}₂]₂ and ammonium N,N-tetrametylene-dithiocarbamate and characterized by spectral methods (IR, UV–Vis, MS, and NMR). X-ray structure analysis revealed the complex as molecular and dimeric in solid state with each of chelating dithiocarbamate ligands bonded to one Cd center and sulfur atoms from two tri-tert-butoxysilanethiolato ligands bridging metallic centers and thus completing the CdS₄ coordination sphere. Thin film of the precursor prepared on SiO₂ substrates via spin-coating technique was analyzed by AFM. Its decomposition was studied by thermal analysis methods (TG, DSC, and TG-FTIR). After melting at 227 °C, [Cd{μ-SSi(OBu ^t )₃}(S₂CNC₄H₈)]₂ undergoes endothermic decomposition leading to CdS as the only solid product further identified by XRD, EDS, FIR as hexagonal CdS form. Its morphology is characteristic and may be described as “micro-noodles”.     

A core-shell surface magnetic molecularly imprinted polymers with fluorescence for λ-cyhalothrin selective recognition

In this study, we report here a general protocol for making core-shell magnetic Fe₃O₄/SiO₂-MPS/MIPs (MPS = 3-(methacryloxyl) propyl trimethoxysilane, MIPs = molecularly imprinted polymers, Fe₃O₄/SiO₂-MPS as core, MIPs as shell) via a surface molecular imprinting technique for optical detection of trace λ-cyhalothrin. The fluorescent molecularly imprinted polymer shell was first prepared by copolymerization of acrylamide with a small quantity of allyl fluorescein in the presence of λ-cyhalothrin to form recognition sites without doping. The magnetic Fe₃O₄/SiO₂-MPS/MIPs exhibited paramagnetism, high fluorescence intensity, and highly selective recognition. Using fluorescence quenching as a detecting tool, Fe₃O₄/SiO₂-MPS/MIPs were successfully applied to selectively and sensitively detect λ-cyhalothrin, and a linear relationship could be obtained covering a wide concentration range of 0–50 nM with a correlation coefficient of 0.9962 described by the Stern-Volmer equation. The experimental results of practical detection revealed that magnetic Fe₃O₄/SiO₂-MPS/MIPs as an attractive recognition element was satisfactory for determination of trace λ-cyhalothrin in honey samples. This study, therefore, demonstrated the potential of MIPs for detection of λ-cyhalothrin in food.     

X-ray structural study of alkaloids. VII. Structure and absolute configuration of severidine

A physicochemical and complete x-ray structural investigation of the new alkaloid severidine isolated from the epigeal part ofKorolkowia sewerzowii Regel has been performed. The crystals were investigated in the form of severidine hydrochloride, C₂₇H₄₃NO₅·HCl, rhombic,a=12.642, b=12.882, c=16.621 Å, z=4, space group P2₁2₂2₁, at ?120°C. The structure was interpreted by the direct method and was refined to R=0.039. The hydrogen atoms were revealed. The absolute configuration was established by means of the Hamilton test. The skeleton of the cation is constructed of bicyclic and tricyclic fragments linked by an ordinary C-C bond. All the rings have the chair conformation. The bond lengths and valence angles are normal.     

Synergistic effect of additional TiO2 support on metathesis activity of ethylene and 2-butene over supported tungsten-based catalysts for propylene production

Tungsten-based catalysts of different preparations mixed with TiO₂ support were investigated in the metathesis of ethylene and trans-2-butene to propylene. The catalytic activity of silica-supported tungsten oxide catalyst (WO₃/SiO₂) mixed with TiO₂ additional support had higher efficiency than that of mixed SiO₂-TiO₂ supported tungsten oxide (WO₃/SiO₂-TiO₂). The clean area of the TiO₂ additional support, which provides more space for tungsten migration, is an important key to explain the improved catalytic activity, due to the higher fraction of the isolated surface tetrahedral tungsten oxide species and better dispersion of the tungsten oxide species observed by FT Raman spectroscopy. In addition to the synergistic effect of the additional TiO₂ support on the metathesis activity, the similar synergy was also observed for the one–third diluted catalysts with additional SiO₂. It has been found that the synergistic effect exerted by the presence of additional SiO₂ support predominates over the one-third dilution effect of catalyst concentration. Thus, adding an additional support is another simple way to improve the catalytic activity of the catalysts and makes great benefit for being used in real chemical industry.     

A photoionization study of the van der Waals molecule C2H4 · HCl

The dissociation energy of the C₂H₄ · HCl van der Waals complex was determined to be 3.18±0.73 kcal mol^?1 by a dissociative photoionization technique. C₂H₄ · HCl was produced by free expansion of a 1:4 mixture of C₂H₄ in HCl and the clusters were ionized with tunable synchrotron radiation. The photoionization efficiency function of (C₂H₄ · HCl)⁺ from C₂H₄ · HCl was determined between 600 and 1,300 Å and the onset for (C₂H₄ · HCl)⁺ was established as 1,163±2 Å = 10.66±0.02 eV; these values give ΔH _f ⁰ (C₂H₄ · HCl) = ?10.7±0.7 kcal mol^?1 and ΔH _f ⁰ (C₂H₄·HCl⁺)=235.1±0.9 kcal mol^?1. A complex ion dissociation energyD ₀(C₂H₄ · HCl⁺) = ?0.3±0.9 kcal mol^?1 was calculated from the results. The major features on the PIE curve for C₂H₄ · HCl⁺ can be analyzed in terms of the known energetic features of C₂H ₄ ⁺ and HCl. An extended energy diagram for the C₂H₄ + HCl system is presented.     

Determination of the Avrami exponent of partially crystallized polymers by DSC- (DTA-) analyses

This paper presents a new method for a rapid determination of the Avrami exponentn by nonisothermal thermoanalytic analysis (DSC and DTA, resp.). Contrary to conventional techniques this method can be used in the entire temperature range and therefore it is applicable to polymers crystallizing from the melt. The proposed technique is applied to injection moulded low density polyethylene (LDPE), injection moulded high density polyethylene (HDPE), unpigmented extruded polypropylene (PP_unpigm.) and pigmented extruded polypropylene (PP_pigm.). The resulting values for the Avrami exponentsn _LDPE～2.9,n _HDPE～1.3, \(n_{PP_{unpigm} }\) ～2.2 and \(n_{PP_{pigm} }\) ～ 2.1 derived by crystallization from the melt were compared with isothermal measurements and with results given by other authors.     

Weak acid–base interaction induced assembly for the formation of rambutan-like poly(styrene-alt-maleic anhydride)/silica composite microspheres

To investigate the effect of surface functionality on the morphology of polymer/silica composite, poly(styrene-alt-maleic anhydride) (SMA) spheres prepared via precipitation polymerization method was employed. In water/ethanol solution, diethanolamine (DEA) was used to catalyze the hydrolysis reaction of tetraethoxysilane (TEOS), and rambutan-like poly(styrene-alt-maleic anhydride)/silica (SMA/SiO₂) microspheres were synthesized through in situ sol–gel process. The obtained structure and morphology were characterized by FTIR, NMR, TEM, SEM, and TGA. The results showed that the hydrolyzed SMA chains on the surface was crucial to the nucleation and growth of silica, and the morphologies of SMA/SiO₂ composite microspheres can be controlled by the amount of DEA and the ratio of SMA/TEOS. In addition, the SMA/SiO₂ microspheres were used to prepare hierarchical structure of SMA/SiO₂/Ag particles, which were utilized for the construction of surface-enhanced Raman scattering substrate (SERS).     

Kinetics of Water-Mediated Fluctuations in Room Temperature Ionic Liquid: N,N-Diethyl-N-methyl-N-(2-methoxyethyl) Ammonium Tetrafluoroborate

The kinetics of small-angle X-ray scattering (SAXS) was assessed in the room temperature ionic liquid (RTIL)–x mol% H₂O system, where the RTIL is N,N-diethyl-N-methyl-N-(2-methoxyethyl) ammonium tetrafluoroborate, [DEME][BF₄]. During equilibration of a non-equilibrium state, the largest time evolution of SAXS was observed at approximately 90 mol% H₂O. Above 85 mol% (x _c), the SAXS intensity increased gradually for 24 h. For the larger q region, the prepeak and principal peak in X-ray diffraction patterns have no time dependence in the water-rich region (70–91 mol%). The long time relaxation process observed in SAXS was related to the outstanding pH oscillations at 90–95 mol% over several days in the [DEME][BF₄]–water system. The x _c for nonequilibrium anomalies is related to the equilibrated crossover concentration from 65–85 mol% (from SAXS) to 85–95 mol% (for the prepeak in X-ray diffraction) in the [DEME][BF₄]–H₂O system. Inside [DEME][BF₄], the dynamic and static properties of hydrogen bonding of water changed drastically at x _c.     

Non-isothermal reduction of silica-supported nickel catalyst precursors in hydrogen atmosphere: a kinetic study and statistical interpretation

A series of silica-supported nickel catalyst precursors was synthesized with different SiO₂/Ni mole ratios (0.20, 0.80 and 1.15). Non-isothermal reduction of Ni catalyst precursors was investigated by temperature-programmed reduction at four different heating rates (2, 5, 10 and 20 °C min^?1), in a hydrogen atmosphere. Kinetic parameters (E _a, A) were determined using Friedman isoconversional method. It was found that for all mole ratios, apparent activation energy is practically constant in conversion range of α = 30–70 %. In considered conversion range, the following values of apparent activation energy were found: E _a = 129.5 kJ mol^?1 (SiO₂/Ni = 0.20), E _a = 133.8 kJ mol^?1 (SiO₂/Ni = 0.80) and E _a = 125.0 kJ mol^?1 (SiO₂/Ni = 1.15). Using two special functions (y(α) and z(α)), the kinetic model was determined. It was established that reduction of Ni catalyst precursors with different SiO₂/Ni mole ratios is a complex process and can be described by two-parameter ?esták–Berggren (SB) autocatalytic model. Based on established values of SB parameters for each mole ratio, the possible mechanism was discussed. It was found that for all investigated ratios, the Weibull distribution function fits very well the experimental data, in the wide range of conversions (α = 5–95 %). Based on obtained values of Weibull shape parameter (θ), it was found that experimentally evaluated density distribution functions of the apparent activation energies can be approximated by the unbalanced peaked normal distribution.